How To Fix Part of the Touch Screen Not Working on Tecno Pova 5 Pro

You probably touch the screen of your phone hundreds of times per day. It’s no surprise that smartphone touchscreens are one of the most common components to fail, given their delicate glass construction. However, a part of the touch screen not working on your Tecno Pova 5 Pro does not necessarily mean it is a hardware issue. There could be other reasons why your Android’s touch screen stopped responding.

If your phone’s touchscreen frequently fails to respond, there are several things you can try before calling a professional. This article will reveal those proven fixes you can easily perform independently.

Part 1. Why Is Part of My Screen Not Working

There are two possible causes as to why your phone’s touch screen is not working. One is the touch screen may have been damaged, and the other is the Tecno Pova 5 Pro device may be experiencing technical difficulties.

If you drop your phone and it becomes stuck against something, the touch screen’s connectivity may fail. Only a part of the touch screen may sometimes become damaged and unresponsive. That may also occur when there is a technical failure, such as the phone hanging. A part of the touch screen not working can occur when malware is downloaded or when phone settings are changed.

Now, the problem can affect any Android phone, and users may encounter the following error messages on their respective phone models:

• Tecno Pova 5 Pro P40 lite half touch screen not working
• Nexus touch screen not working
• LG screen is unresponsive to touch
• Tecno Pova 5 Pro left side of the screen is not working
• Redmi’s whole screen is unresponsive to touch

Part 2. Different Types of Touch Screen Issues and What You Should Check Before Fixing

You may experience a variety of touch screens not working on Android issues:

• A certain part of the touch screen is not working.
• Your touches do not register on the touch screen.
• The touch screen incorrectly responds to your touch.
• Half touch screen is not working.
• The touch screen becomes frozen or hangs.
• The screen flashes, flickers, or remains blank.
• Theleft side of the phone screen is not working.

Before proceeding to how to fix an unresponsive touch screen on an Android device, you should complete the following steps:

• Examine the screen of your device. Check to see if it is cracked or chipped.
• If the screen is damaged, it must be replaced.
• Remove the Tecno Pova 5 Pro device cover and screen protector if they are not damaged.
• If there is a sticker on the Tecno Pova 5 Pro device screen, you must remove it.
• Before continuing, make sure your screen is spotless.

Part 3. How To Fix Part of the Touch Screen Not Working (No Physical Damage)

If you have already tried running the Tecno Pova 5 Pro device in diagnostic mode and verified that it is not physically damaged, then the problem is most likely technical. If your Tecno Pova 5 Pro’s screen is not responding to touches for technical reasons, follow the methods below to resolve the issue.

Restart Your Device

When your touch screen stops working, the first thing you should do is restart your device. The operation is known as soft resetting. You cannot turn your device off from the option on the screen because the touch screen is not responding. Here are the steps to take.

Step 1: Hold the “Power” button until the Tecno Pova 5 Pro device turns off.

Tip: If you hold down the power button for a few seconds, you will see the “Power Off” and “Restart” options on the screen. You can’t use it because the entire screen isn’t responding. Hence, you should press and hold the “Power” button for as long as necessary.

Step 2: When the Tecno Pova 5 Pro device turns off, wait a few seconds.

Step 3: Press and hold the “Power” button to restart the Tecno Pova 5 Pro device.

Check to see if the Android auto touch screen is not working problem has been resolved. Otherwise, proceed with the following methods.

Turn On Safe Mode

You should switch to Safe mode whenever an application or piece of software causes a problem on your device. Only the most fundamental system components are loaded and used when operating in Safe mode.

If your touch screen is functional in safe mode, the issue is most likely internal. You can quickly fix the Android touchscreen issue by following the prompts given below to activate the safe mode:

Step 1: To force a restart, press and hold the Tecno Pova 5 Pro device’s “Power” button for an extended period.

Step 2: Maintain pressure on the “Power” button. Take your finger off it once you see the manufacturer’s logo.

Step 3: When you let go of the “Power” button, press and hold the “Volume Down” button. After that, a “Safe Mode” label will appear in your screen’s lower-left corner.

Turn Off Developer Options

Every smartphone is bound to have limitations. However, smartphone makers include a “Developer Options” menu for advanced users. Here, restrictions are removed, and user preferences can be customized.

If you enable Developer Options on some Android devices, they may stop working properly. If you have recently activated Developer Options and your touchscreen is no longer responding as expected, you should disable it. To do so, follow the instructions below:

Step 1: Launch the Settings app on your device.

Step 2: Select the System menu item, which usually locates at the bottom of the screen.

Step 3: Tap the Advanced options menu, then select Developer Options.

Step 4: You will then find the switch to turn it on or off. Disable itby toggling the button off.

Step 5: Restart your device to check if the part of the touch screen not working issue has been resolved.

Reset Device to Factory Settings

Resetting your device to its factory settings will return it to its state when you first unboxed it. All your phone’s data and installed apps will be erased, including any malware on your device that may be causing the issue to occur. Here’s how to restore your device to factory settings:

Step 1: Since your touch screen is not working, you can factory reset it using Google’s Find My Device web service.

Step 2: Go to Find My Device from any device and sign in to the Google account associated with the damaged screen device.

Step 3: After successfully logging in, you will see your device’s name. Select the Erase Device option.

Step 4: Confirm by pressing the Erase Device button.

Tip: Since all your data will be removed, it’s recommended to back up your data first before resetting your device to factory settings.

Part 4. Fix Using a Third-Party App – Wondershare Dr.Fone

If you’ve exhausted all other options and still can’t fix your Android’s part of the touch screen not working issue, it’s time to resort to Dr.Fone – System Repair! It allows you to repair Android system issues with a single click.

Many users have reported exceptions on their Android devices, such as touch screen failure, black screen of death, system UI failure, app crashing, etc. And in this case, people should seek an Android repair tool.

Dr.Fone – System Repair has made it easier than ever for Android users experiencing technical issues with their device, including an unresponsive touch screen, among other system issues. The best part is that no data will be lost while repairing Android system issues.

Follow the steps given below on how to use Wondershare Dr.Fone System Repair for Android:

Step 1: Select the System Repair option from the main window after starting Dr. Fone.

Step 2: Connect your Tecno Pova 5 Pro or tablet to the computer using the appropriate cable. Choose Android Repair from the three options shown on the left side of the screen.

Step 3: The device information screen will appear in the next window. There, input your device’s unified brand, name, model, country/region, and carrier information. Then click Next after you confirm the warning.

The Android repair procedure may wipe out all data on your device. To confirm and proceed, enter “000000”.

Note: It is strongly advised that you back up your Android data before attempting Android repair.

Step 4: Before repairing your Tecno Pova 5 Pro, you must boot it into Download mode. To boot your Tecno Pova 5 Pro or tablet into DFU mode, follow the steps below:

For a device that has a Home button:

1. Turn off your phone or tablet.
2. Hold the Volume Down, Home, and Power buttons for 5 to 10 seconds.
3. To enter Download mode, release all the buttons and press the Volume Up button.

For a device that lacks a Home button:

1. Turn off the Tecno Pova 5 Pro device.
2. Hold the Volume Down, Bixby, and Power buttons for 5 to 10 seconds.
3. To enter Download mode, release all the buttons and press the Volume Up button.

Step 5: Then press the Next button. The program will then download the firmware. After downloading and verifying the firmware, the program will automatically repair your Tecno Pova 5 Pro. And in a while, your Tecno Pova 5 Pro’s system issues will be resolved.

Supported OS

Check Dr.Fone’s supported operating systems below before using the application to fix your mobile technical issues.

Platform	Supported OS
Windows	Windows 11/10/8.1/8/7/Vista/XP
Mac	Mac 14/13/12/11/10.15/10.14/X/10.13/10.12/10.11/10.10/10.9/10.8

Key Features

Dr.Fone – System Repair is a data management and recovery tool that contains several toolkits in one program, each designed to repair a specific phone problem. Check out its key features below:

• One-click Android Repair Tool
• Troubleshoots and repairs a wide range of Android system problems, including black screen of death, Play Store not working, apps crashing, phone stuck in a boot loop, and bricked Android issues
• A high success rate for fixing Android system issues
• Fixes Android system back to normal

Pros

Here are the advantages of using Dr.Fone – System Repair:

• Highly intuitive UI/UX/. No need for any skill to operate it
• Provides a comprehensive set of toolkits, including advanced data recovery and system repair
• Data management is simple and seamless for both Android and iOS devices
• Data backup with Dr. Fone is simple and quick.

Cons

Check below to know Dr.Fone – System Repair’s limitations:

• Depending on the toolkit required, the program can be costly.

safe & secure

Conclusion

Fixing an Android part of the touch screen not working issue can be quickly done with just a few fixes you can do on your own. However, there may be times when the solutions provided above may not work, and the worst part is factory resetting your phone erases all your data.

That’s why Dr.Fone – System Repair might be your best solution. It has all the tools you need to keep your Tecno Pova 5 Pro 100%. Not only that, but with Dr.Fone, you can repair your Android system issues without dealing with any data loss.

Authentication Error Occurred on Tecno Pova 5 Pro? Here Are 10 Proven Fixes

There are times when users get an authentication error while they connect to a Wifi network. The problem is mostly found in Android whenever a device tries to establish a connection to Wifi. If your device is also experiencing an authentication problem Wifi, then don’t worry. It can easily be resolved. In this post, we will make you familiar with the root cause for the Tecno Pova 5 Pro Wifi problem and how you can resolve whenever authentication error occurred on your device.

Part 1: Any idea about the Wi-Fi authentication problem?

Wi-Fi authentication has to be done every time you wish to connect to a Wi-Fi network over your smartphone or laptop. To authenticate yourself and connect to the protected Wi-Fi network, you need to have the password of it. But if after you’re putting in the correct password and still experiencing the wifi authentication problem. Here’s what you need to know.

Authentication error occurs when the “deal” between the Wi-Fi router and device fails due to certain reasons. First, the Tecno Pova 5 Pro device sends the password of the network and the “connect” request in an encrypted format to the Wi-Fi router. Then, the router decrypts the password and compares the password saved on it. Now, if the password matches, it sends affirmation for the “connect” request, and then the Tecno Pova 5 Pro device is allowed to connect to the network.

Part 2: Why Authentication Error Occurred when Connecting to Wifi?

There could be plenty of reasons for facing an authentication error on your device. Most of the time, it occurs whenever a Wifi router seems to malfunction. Furthermore, if your phone has been recently updated, then chances are that there could be an issue with its drivers. A security attack can also make your device malfunction as well. An unstable connection or a router blockage can also be a reason for this issue.

In this scenario, whenever you try to connect to a Wifi network (even after supplying the correct password and username), it doesn’t connect to it. Instead, it displays an authentication error occurred promptly. Thankfully, there are plenty of ways to overcome the authentication problem Wifi. In the next section, we have provided three different solutions to fix the Tecno Pova 5 Pro Wifi problem (as it mostly happens on Android devices).

Part 3: 10 Solutions to Fix Wifi Authentication Error

Before we make you familiar with different fixes for the Wifi authentication error, it is important to check your router beforehand. Chances are that you could be getting the authentication error because your router is not functioning properly. You can restart it and try to connect any other device to it as well to check it. After making sure that there is no problem with your network or router, follow these suggestions to overcome the authentication error occurred issue.

Check if extra characters added in Wi-Fi password

Ensure that no other extra characters are being added in the Wi-Fi password while you’re entering it. Key in the password carefully while viewing the characters, and then check if the authentication error occurs or not.

One-Click to Fix Wifi Authentication Error by Android System Repair

Android system repair is considered the most effective way to fix Wifi Authentication Error. As the bottom-layer Android system files may be corrupted unconsciously with days of phone use, the Wifi Authentication Error may be one of the symptoms.

So Android repair requires programming knowledge to do it?

No! With Dr.Fone - System Repair (Android), you can do Android repair in just a few steps and get all issues like Wifi Authentication error fixed easily.

Dr.Fone - System Repair (Android)

An easy-to-operate tool to fix Android system issues like a Wifi authentication error

• Fixes all Android system issues like a black screen of death, Wifi authentication error, etc.
• One-click to fix the Wifi authentication error. No technical skills required.
• Supports all the new Tecno Pova 5 Pro devices like Galaxy S8, S9, etc.
• Easy-to-follow instructions provided on each of the screens.

3981454 people have downloaded it

Here are the steps to fix Wifi Authentication Error by Android system repair:

Note: Android repair is effective to permanently fix Wifi Authentication Error, but may wipe out the existing phone data. Backup all the important Android data to PC before you go on.

1. After the Dr.Fone tool is downloaded, install, and launch it. You can see the following screen.

1. Connect your Tecno Pova 5 Pro to the computer, and select “Android Repair” in the middle.

1. Select all the details that match your device, and click “Next”.

1. Next up, you should boot your Tecno Pova 5 Pro in download mode by following the on-screen instructions.

1. Allow the program to download the corresponding firmware. After that, the Android repair will start and get the Wifi Authentication Error fixed in minutes.

Use static IP address instead of DHCP

DHCP, or Dynamic Host Configuration Protocol is the default IP address assignment for the Wi-Fi settings on many devices. Whereas DHCP can cause IP address conflict during the dynamic IP address assignment. So, you’d better change “DHCP” to “Static” to see if the authentication error persists.

Step 1: Head to the “Settings” of your Tecno Pova 5 Pro and then opt for “Wireless and Networks” followed by “WLAN/WiFi”.

Step 2: Now, hit on the WiFi network that is showing “authentication error occurred”.

Step 3: Depending on your Tecno Pova 5 Pro model, look for “IP Settings” and tap on it. Now, switch the “DHCP” to “Static”.

Step 4: Note down the static IP address fields and wipe off all the fields. Punch it in again and then save it.

Check carefully for duplicate Wi-Fi names before you connect

Perhaps, you might connect to a WiFi with a similar name. There are good chances that some users do not modify their WiFi network name and possibly, your neighbor may have the same WiFi network, service provider. Therefore, ensure you connect to the correct WiFi network.

Reset the Wifi network

One of the easiest ways to fix the authentication problem of Wifi is to reset the network. To do this, you would be required to forget the respective network first and then connect to it again. This can be done by simply following these steps.

1. Firstly, you need to forget a Wifi network. To do it, go to your phone’s Settings > WiFi and network. From here, you can see a list of all the Wifi hotspots that your phone connects to. Select the network you wish to forget.

2. When you would select a network, it will provide the basic information related to it. Just tap on the “Forget” button and agree to the pop-up message. This will erase the network’s information from your device.

3. Afterward, turn on your Wifi again and tap to the network you wish to connect to. Simply provide the credentials and tap on the “Connect” button to reestablish the connection. This way, you can reset the network successfully.

Modify network connection

If the above solution won’t work, then you would be required to walk the extra mile to fix the Tecno Pova 5 Pro Wifi problem. After you reset a network connection, if still getting issues regarding the authentication of the network, you need to modify the connection. In this technique, you will be changing the IP settings on your phone to alter the way it establishes a secure connection. You can do it by following these steps.

1. To start with, visit your phone’s Settings and open the Wifi page.

2. This will display a list of all the Wifi networks that are associated with your device. Just long-tap on the Wifi network that you wish to modify. It will open another pop-up window. From here, tap on the option of “Manage network settings”. Sometimes, users also get an option of “Modify network settings” here as well. Simply select it to proceed.

3. It will display basic information related to your Wifi network. Just tap on the “Show advanced options” button to access more options related to the network setting.

4. From the IP Settings menu, change the field from DHCP to Static. This will let you establish a static connection between your device and the router.

5. As soon as you will change it to static, you will get different fields related to your network’s IP address, gateway, DNS, and more. Simply fill these fields and tap on the “Save” button once you are done.

Now, try to connect to the Wifi hotspot again. You would be able to overcome the authentication problem of Wifi.

Change Network Security Type

It has been observed that, when we connect to Wifi, our device chooses a wrong security type. This clashes with the default security protocol of the router and authentication error occurred due to this. If your device is facing the same issue, then it can be fixed by simply changing its security type. To do this, follow these instructions:

1. To change the security type of a network, you need to “Add the network”. If you already have the Wifi network saved, then simply forget the network by following the above-mentioned tutorial.

2. Now, turn on your device’s Wifi and tap on the option of “Add network”. Here, you would be asked to give a network name and select the security type. To manually select it, tap on the “Security” option.

3. From here, you will get a list of various security protocols that you can pick. Select “WPA/WPA2-PSK” and save your selection.

Now, try to connect to the network again. Most likely, it will let you fix the authentication error on your device.

Update Android firmware to the latest

There are instances where an outdated OS version of your Tecno Pova 5 Pro may create a hindrance in establishing a connection between your device and the WiFi network. You need to update your Android firmware to the latest version and then check if the problem persists or not.

Step 1: Launch “Settings” of your Tecno Pova 5 Pro and then get into the “About Phone” option.

Step 2: Now, opt for the “System Update” option. If the update is available, get your device updated to the latest OS version.

Restart the router and reset Android network settings

Sometimes, the WiFi router may hang up while establishing a connection and therefore, the wifi authentication problem occurs. Try restarting your Wi-Fi router and then check if your device connects successfully. If this doesn’t work, try to reset your Android Network Settings .

Bonus tip: Turn Airplane mode on/off

By simply turning on the Airplane mode (and later turning it off), you can easily fix the authentication problem Wifi most of the time. You can find a toggle button for Airplane mode on the notification bar of your phone. If you can’t find it there, then go to your phone’s Settings > Connection > More Networks and turn on the feature of “Airplane Mode”.

Let it do for a while. Afterward, turn it off and try to connect to the Wifi network again.

After following these quick and easy suggestions, you would be able to fix the Tecno Pova 5 Pro Wifi problem for sure. Even if you use any other Android device, then its authentication error can easily be resolved after these effective solutions. Go ahead and give these expert solutions a try and let us know about your experience as well. If you have any other solution to fix the authentication problem Wifi, then share it with us as well in the comments.

Tecno Pova 5 Pro Not Receiving Texts? 10 Hassle-Free Solutions Here

If you are using an Tecno Pova 5 Pro, you might have encountered the issue of not receiving texts. This issue can be quite frustrating, as it prevents you from staying connected with your friends and family. However, there are several ways to fix this issue and get your texts back up and running. In this article, we will show you some of the best solutions to fix the issue of not receiving texts on Tecno Pova 5 Pro.

It is very common that the Android messaging app is not working on many devices especially broken devices . People often encounter this issue in Tecno Pova 5 Pro phones, even the latest ones.

You might find lots of people online stating I can’t receive text messages on Android. And usually, people don’t find a legit solution for this issue. If you are also experiencing this sort of issue on your Tecno Pova 5 Pros, then don’t panic. We have a series of methods that can supposedly fix the problem. But at first, we will learn what the main reasons this problem arises are and how do you know that it is consistent not some random error.

Take a look at the sections below, and you will learn all possible things regarding the messaging application on your phone.

Part 0. Symptoms and Causes of Android Not Receiving Texts

The most common symptoms that would clarify that your Android messaging service is not working right are given below:

• You will stop receiving any texts all of a sudden.
• You can’t send or receive a text message.
• Whenever you try to text someone, the message sent failed notification pop up on the screen.

The reasons why your Android is not receiving texts are given below:

• Network issue
• Insufficient memory
• Mis-configuration of device settings
• Switching of devices
• A glitch in the messaging app
• Software issue
• Carrier problem with the registered network.

Apart from all these reasons, some additional causes are also there that can lead to this issue.

Part 1: One-click to Fix Android not Receiving Texts by Android System Repair

If you are not willing to waste your precious time fixing the message problem, then you can switch to the top-rated Android repair tool, i.e., Dr.Fone - System Repair (Android) . With this software, you can easily fix issues like the black screen of death, crashing apps, can’t receive text messages on Android, or failed download. If you have no idea what is causing the message app problem, you can simply think of repairing the whole Android system.

You surely need to try the software as it can perform the following tasks:

Dr.Fone - System Repair (Android)

Android repair tool to fix Android Not Receiving Texts

• Fix the Android system without technical knowledge.
• Complete Android repair tool for all brands and models.
• Simple and Easy Repair procedure
• 100% guarantee that the problem will be fixed.
• Also available for iOS devices.

3981454 people have downloaded it

You can download and install the software on your system and use it to fix any issue. Then follow the steps given below:

Step 1: Launch the application and choose the System Repair option from the main interface. Connect your Tecno Pova 5 Pro to the computer and choose the Android Repair mode, and hit the Start button to begin.

Step 2: You will have to provide information about your device, including the brand, name, model, country, and carrier. In between, you will be notified that your device repair might erase the existing data of your device.

Step 3: Agree with the conditions and hit the Next button. The software will download the firmware package automatically. It might take a while to finish the download, and when it is finished, the repair process will be initiated automatically.

It won’t take long, and your Tecno Pova 5 Pro will be repaired. Now you will be able to receive and send text messages without any hassle.

Part 2: Remove and Insert the SIM

The easiest thing that you can try if your Tecno Pova 5 Pro is not receiving any text messages is because the SIM is not inserted right. If your SIM card is inserted wrong, then it is obvious you can’t receive text messages on Android. Simply take out the SIM card, see how it must be inserted, and do it correctly. Once the SIM is inserted in the right way, you will receive the pending text messages immediately unless there is another issue preventing it.

Part 3: Check Network Connection

Another simple method that you can try if you are not receiving text messages on Tecno Pova 5 Pro phone is to check your network connection. Usually, you can see the bar on the top of the screen. Maybe the problem exists because you have no signal strength at the moment.

Part 4: Consult your Carrier about the Data Plan

Maybe you are unable to get messages on your Tecno Pova 5 Pros because your existing data plan has expired. You can directly contact your Carrier about the issues where your Tecno Pova 5 Pro is not receiving texts. If your plan has expired, then you might have to renew it immediately. If not, then try out other fixes to resolve this issue.

Part 5: Try the SIM card in Another Phone or Slot

Sometimes, people complain that Tecno Pova 5 Pro is not receiving texts from iPhone, and it might be because of the SIM card issue. So, the best thing you can try is to remove the SIM from your current phone and insert it into another phone.

When you are offline the message is saved on the server and just about when you get online, the text messages are delivered. If it is the SIM issue, then you will not get the message unless you contact your network operator.

Part 6: Clear the Cache of Messaging App

In smartphones, the memory space often gets filled up with cache. And not everyone remembers that they have to clear the cache from time to time. The accumulated cache can also lead to this issue. So, if your Android messaging app is not working, you have to clear the cache memory.

Step 1: Open the Settings and go to Apps. Find the Messages app from the list and tap to open it. There you will see the storage occupied by the app along with the cache.

Step 2: Click on the Clear Cache button and wait as the Tecno Pova 5 Pro device free up the memory of your device.

Once the cache is cleared, you can also clear the data if you want to and you’ll instantly receive the text messages on your phone.

Part 7: Delete Useless Messages to Free Up Space

Sometimes, if you are not receiving text messages on Tecno Pova 5 Pro, it means that you need to clean up the clutter of useless messages from your phone and SIM both. The phone messages can be deleted directly from your phone. But the SIM card messages needed to be deleted separately. The SIM cards don’t have enough memory to hold plenty of messages. Therefore, once the storage is full, you will stop receiving messages entirely.

Step 1: Open the messages app and open settings. Look for an option that says “Manage SIM Card Messages”. Sometimes, you can find this option under Advanced Settings.

Step 2: There, you will see the existing messages on the SIM. You can either delete all the messages or perform a selective deletion to free up space.

Part 8: Try a Third-party Messaging App

If you can’t receive messages on your default app, then you can try installing a third-party messaging app. Nowadays, most people use social media messaging apps like WhatsApp, Skype, etc. for messaging. So, if somehow, the Android is not receiving texts, then the new apps can help you to send and receive messages with a non-native network.

Further Reading: 15 Best Free Chat Apps in 2022. Chat Now!

Part 9: Ensure your Phone is Fully Charged

Another possible fix to this problem might be your phone’s battery percentage. Sometimes, when the Android is in power saving mode, it disables the default apps too. As a result, you can’t even receive text messages on Android. So, when you plug in the charger, the power saving mode will be disabled, and you will get your text messages.

Part 10: Ensure It’s Not An iMessage From iPhone

If the Tecno Pova 5 Pro phone is not receiving texts from iPhone, then this might be a different issue. Usually, there is an option on the iPhone where they can send texts as iMessage and simple messages. If the iPhone user sends the text as iMessage, then it will not show up on the Android device. To resolve this, you have to follow the steps below:

Taking the iPhone in hand makes sure that you are connected to a network. Open settings and scroll to look for the Message option. Toggle the bar next to the iMessage option to turn it off.

If the FaceTime option is also on, you might have to deactivate that too to send messages and calls as regular ones.

Part 11: Update Your Android

Updating the operating system to the latest Android version can fix some system errors which may cause the “Android not receiving texts” issue because the latest version always brings a better user experience and fix the know bugs.

Conclusion

Now you know several methods that can work if the Android messaging app is not working.  If you experience this kind of issue with your Tecno Pova 5 Pro, then you are most likely to resolve them with these fixes. If none of the solutions seem to fix the issue, then you can take the help of Dr. Fone - System Repair (Android) feature. With this tool, you can resolve all kinds of working issues on your device.

Also read: