How to Fix the Soft Bricked Lava Blaze 2?

Bricked phone is a serious problem, as your brick smartphone could be suffering from a soft brick or hard brick problem, and must be dealt with carefully. It is very common to see a brick smartphone these days. If you are wondering what exactly is a bricked phone, here is your answer.

A bricked phone, hard brick or soft brick, is a smartphone which refuses to start or boot all the way up the home/main screen of the Lava Blaze 2 device. This issue is observed within most Android phones because users have a tendency to tamper with the Lava Blaze 2 device settings, flashing new and customized ROMs and tweaking with the essential files. Playing around with the phone’s internal set-up leads to such errors, worst of them being a brick smartphone. Usually, a bricked phone does not switch on and stays frozen at the Lava Blaze 2 device logo, a blank screen or even worse, doesn’t respond to any command, even the power on command.

If you are confused about the soft brick and hard brick problems and looking for solutions to fix your priced phone, then here is all you need to know.

Read on to find out more.

Part 1: What is the difference between soft brick and hard brick?

To begin with, let us understand the basic difference between a soft brick and hard brick issue. Both versions of a bricked phone prevent it from booting but differ in their causes and gravity of the problem.

A soft-brick problem is caused merely by a software error/crash and makes your device switch on automatically every time you manually turn it off. This phenomenon is referred to as Boot Loop. Soft bricked Android phones are not as difficult to fix as the hard bricked Android phones. It is convenient to say that a soft bricked phone only boots up half-way and not fully, whereas a hard bricked device does not switch on at all. A hard brick error is thus caused when the kernel, which is nothing but an interface for the software to communicate with the hardware, is tampered with. A hard bricked phone is not recognized by your PC when plugged in and is a serious problem. It requires troubleshooting techniques and cannot be easily fixed as the soft brick problem.

hard bricked v/s soft bricked

Hard bricked phones are a rare sight, but the soft brick is very common. Given below are ways to fix a soft brick Android phone. The techniques listed here are the best and the most efficient ways to get your phone back to its normal working conditions without losing your important data or damaging your device or its software.

Part 2: Stuck at the Boot Loop

This is the first sign of a soft bricked Android phone. Boot Loop is nothing but when your phone does not remain switched off and turns itself on automatically, and freezes at the logo screen or blank screen, every time you manually try to power it off.

Stuck at boot loop problem can be fixed by clearing your Cache partitions. These partitions are nothing but storage locations for your modem, kernels, system files, drivers and built-in Apps data.

It is advisable to clear Cache partitions regularly to keep your phone free from such glitches.

Since the phone refuses to boot, Cache can be cleared from entering into the Recovery Mode. Different Android devices have different ways to put it in recovery mode. Normally pressing the power key and volume down key helps, but you may refer to your phone’s guide for better understanding and then follow the steps given below to clear the cache partition:

Once you are the recovery mode screen, you will see a number of options as shown in the screenshot.

Use the volume down key to scroll down and select ”Wipe cache partition” as shown below.

After the process is completed, select “Reboot System” which is the first option in the recovery mode screen.

This method will help you erase all the clogged up and unwanted files. You may loose some App related data, but that is a small price to pay to fix your bricked phone.

If this method does not boot up your brick smartphone and the problem still persists, there are two more things you can try. Read ahead to find out about them.

Part 3: Booting straight into recovery mode

If your bricked phone does not boot up to your Home Screen or Lock screen and instead boots directly into Recovery Mode, there is not much left to do. Booting straight into recovery mode is undoubtedly a soft brick error but it also indicates a possible problem with your current ROM. The only option you have to flash a new ROM to reboot your bricked phone back to its normal functioning.

To flash a new ROM:

Firstly, you must root your phone and unlock the Bootloader. Every phone’s mechanism to unlock the bootloader is different, thus, we suggest to refer to your user manual.

Once the Bootloader is unlocked, take a backup of all your data by selecting “Backup” or “Android” back in recovery mode. The process should not take long and all you need to do is tap “OK” to config backup.

In this step, download a ROM of your choice and store it in your SD Card. Insert the SD Card in your phone to begin the flashing process.

Once at the recovery mode, select “Install Zip from SD Card” from the options.

Scroll down using the volume key and use the power key to select the downloaded ROM.

This might take a few minutes of your time, but once the process is complete, reboot your phone.

Hopefully, your bricked phone will not boot normally and work smoothly.

Part 4: Booting straight into Bootloader

If your bricked phone boots straight into Bootloader, then this a serious issue and must not be taken lightly. Flashing a new ROM or clearing cache partitions are of little help in such a brick smartphone situation. Booting straight into Bootloader is a peculiar soft bricked Android phone feature and can be tackled only by downloading and flashing your original ROM from the manufacturer. In order to do so, a detailed study about your manufacturer’s ROM, ways to download and flash must be carried out. Since different Android phones come with different types of ROMs, it difficult to cover all the aspects about the different types of ROMs.

Brick smartphone problem has become more prominent than phone freezing or hanging issue. Android users are often seen looking for solutions to fix their soft brick and hard brick phones. Android phones are prone to get bricked and thus, it is important for us to know about the three techniques given above. These methods have been tried, tested and recommended by ay affected bricked phone users. Therefore, these tips are reliable and worth a try. So if your phone acts stubborn and refuses to boot normally, examine the problem carefully and adopt one of the solutions given above which best suits your situation.

How to Fix Unfortunately, Contacts Has Stopped Error on Lava Blaze 2

Have you recently noticed a message stating “Contacts has stopped”? This is enough to take away all your peace. As, our native contacts app stashes all our useful contacts which are time and again needed by a user. It’s malfunctioning is enough to give us chills. But, why the Lava Blaze 2 or any other Android device incurs such problems?

It can occur while you launch the app or while you’re in the app already finding the required contact or when any other application is trying to gain access to it. So, to rage a battle with this issue, you need to seek help of some powerful methods in killing down the issue of contacts app crashes. And, the best part is that you’ve secured yourself by reaching the right place. We will be taking an in-depth discussion on several methods that may prove to be helpful. Let’s read them up here now.

Part 1: Get Android system fixed in one click

We’re always in search of a method that provides handy solution in a quite speedy and hassle-free manner. There are hundreds of tips and tricks for the same. You never know the possibility of firmware being the major drawback. No amount of manual methods can beat the performance of Dr.Fone - System Repair (Android).It is capable of providing 100% solution to any kind of issues, your phone gets troubled with. It is designed with the technology of combating the problem of black screen of death, app crashes and several other issues. In just a single-click, ward off the issue and free your device with errors

Dr.Fone - System Repair (Android)

Fix Contacts app crashing on Android in one click

Incorporates with 1-click technology to resolve any issues occurring in your Lava Blaze 2. Black screen of death, app crash, system crash, faulty issues etc.
fone – Repair (Android) interface is extremely simple for users and lays functionalities aptly.
One of its kind software with highest success rate in the market.
Fully compatible with all kinds of Android phones, models, as well as the popular carrier.
It provides users with 24 hours customer care service to resolve queries.

3,016,434 people have downloaded it

In this tutorial, we will learn the methodology of addressing the contacts keep stopping problem and gain triumph over it.

Step 1: Load program and draw connection of device

Download Dr.Fone - System Repair (Android) on PC. While program installs, use USB cable to connect device with system. From interface, tap on “System Repair” main window.

Step 2: Opt for Android Repair option

You’ll be directed to the “System Repair” screen where you have to opt for “Android Repair” options appearing over the left panel of the program. After that, do not forget to press “Start”.

Step 3: Key in device information

From following screen, fill the fields of “Brand”, “Name”, “Model”, “Country” and several other parameters. Then, tap on “Next” option to proceed further.

Step 4: Download Firmware package

Just follow the on-screen steps for booting your Lava Blaze 2 into download mode. Then, hit the “Next” button to proceed with downloading the most suitable firmware package for your Lava Blaze 2.

Step 5: Repair Android phone

Once the software downloads, the program will automatically repair any issues irking over your phone. Now, your phone is all free from contacts error.

Part 2: 9 Common ways to fix “Unfortunately, Contacts Has Stopped”

2.1 Restart Android system

Our response to any minuscule issue is straightaway restarting phone. This helps in clearing out any problem that might have disrupt the functioning of phone. So, to fix the problem of “Contacts app won’t open”, you too can try out your hand in this method.

Get hold of your Android system and long press the power button.
This will fadeout the main screen and showcase several options from where you’ve to tap on “Reboot/Restart” mode.

Now, your device will quickly reboot the Lava Blaze 2 device. Once, the Lava Blaze 2 device regains its normal state, check whether the issue is coming again or not.

2.2 Clear cache and data of Contacts app

The cache memory basically stashes the copies of the concerned application. It is indeed a streak of copies of the desired app storing information and incurring additional space on the storage. This might be the reason why the contact app crashes rapidly on your Lava Blaze 2. Hence, it can prove to be a good remedy for this problem. Just follow down the steps mentioned below-

First of all, go to “Settings” application from the app drawer or from the notification panel.
Now, surf and select for “Applications” or “Apps & notifications”.
Here, you need to browse for “Contacts” app and open it.
On “Contacts” app, just tap on “CLEAR CACHE” and “CLEAR DATA” button. This will prompt the cache memory to be cleared.

2.3 Wipe cache partition

As we know the cache memories are the temporary files build by the firmware. These are of little importance as they are bound to become a bit more corrupted in nature. And sometimes, may indirectly become a hurdle for the working of contacts app. It is good if the Lava Blaze 2 device is cleared off from the caches. Instead of manually wiping down the cache memory, we will understand how to clear off the cache partition in the following steps.

From device, just power off your device. Then, press the “Volume Down + Power” button with “Home” combinations together.
In a moment’s time, lose fingers from the “Power” button but do not release fingers from “Volume Down” and “Home” buttons.
Once you view the “Android System Recovery” screen, just lose the “Volume Down” and “Home” buttons.
Over the options available, just opt for “wipe cache partition” by tapping the “Volume down” button until the desired option is highlighted.
Finally, push the “Power” key to give consent to the selection.

After, the process is through there will be an option for “Reboot System Now”. Tap on it and restart the Lava Blaze 2 device.

2.4 Disable Google+ app

The root cause for detecting any problem is not very easy. You never know the overloading of Google + application might have directly impacted contacts app crashes. To resolve it, disabling it may prove to be a helpful solution. Here is the quick reference for disabling Google+ application.

First of all, visit “Settings” from your Lava Blaze 2.
In “Settings”, visit the “Application Manager” or “Applications” menu and browse for “Google +” app.
From the application main page, you can choose to do either of the methods:

Either, completely disable the application to work by pressing on “Force stop” or “Disable” feature.
Or, brush away the unnecessary cache piled up on your storage by using “Clear Cache” functionality.

There will be a prompt stating that the application may misbehave. However, you must disable the feature and check whether it worked out for you or not.

2.5 Update your device software

Many a times, we skip updating our device software thinking it is of less importance. In fact, one must not miss out the updates that occurs in phone. As, without the updates, the scope of some applications are affected to some extent. For its better functioning and avoiding issues like “contacts keep stopping”, here is how you should update device software.

First and foremost, head on to “Settings” menu. Over there, click on “About Device”.
There, you need to tap over “Software Update”.

The device will now check whether there are any updates available for your device. If yes, then update application right away.

2.6 Reset App Preferences

As stated, the malfunctioning of contacts can be due to be any unexpected reason. Hence, users can opt for resetting app preferences. This may prove to be helpful in brushing away the issue of “Contacts app won’t open”.

Launch “Settings” app and surf for “Apps” or “Applications” option on your Lava Blaze 2.
Just, tap over the three dots appearing at the upper right section and then tap on “Reset app preferences”.
At last, just select “Reset default apps”.

2.7 Delete voicemail

Do you happen to exchange voicemails quite often? It can trigger to be the reason for contact app crashes. If your device happens to have a bulk of voicemails, you must get rid of them sooner or later. As, these might standout to be the prime reason for contacts stopping on Lava Blaze 2. If you’re unaware about the procedure of removing all kinds of voicemails, you can proceed to make use of the following steps.

Start with, launching the “Google Voice” app.
From there, duly opt for “Voicemail”.
Just click on the press menu option and at last select “Delete” option.

2.8 Uninstall the downloaded apps

Some applications contain some unwanted advertisements and some elements of malware. This can be enough for disrupting the functionality of the built-in contact app won’t open. It is crucial for your phone to be detoxed from such elements. You need to manually scrap off such applications. Do, ensure to download the application from the genuine source for future use.

On your Lava Blaze 2, just go to “Home” screen and tap on “Apps” icon.
Then, tap on “Settings” icon followed by going to “Applications” or “Apps & Preferences” menu.
After that, tap on “Menu icon” which will showcase the apps installed on device.
Simply, open the app and hit the “Uninstall” button to brush away that app. Repeat the same with other application(s).

Now, check whether you’ve fought the battle with the problem or not.

2.9 Reset to Factory Settings

Last but not least, if all the methods falls flat to resolve the issue of contacts app won’t open. Then, it might be your device has some internal problem. This can be any software crash which might not be fixing with the aforementioned steps. That is where reset to factory settings may prove to be a good option. With this method, your phone will be cleared of all the components, settings and everything present in it. Here are is the comprehensive tutorial for biding bye to the problem of contacts app won’t open.

Note: Do ensure to take a backup of all the data available in your device. As, we don’t want you to regret afterwards.

Just go to “Settings” and surf and select “Backup & Reset” option.
You need to toggle on the option for performing the backup on your Google account.
Then, tap on “Reset” button and then tick mark the option for resetting your phone.

Best Methods for Lava Blaze 2 Won’t Turn On

The Lava Blaze 2 3 boasts numerous impressive features, making it a desirable phone. However, occasional malfunctions can result in the Lava Blaze 2 3 won’t turn on issue. This issue can be incredibly frustrating. Don’t panic if you encounter this issue! There exist solutions to rectify it. This comprehensive guide aims to assist you in diagnosing and resolving the problem.

It will offer both basic steps and advanced techniques. With clear instructions and insightful tips, we’ll help troubleshoot your Lava Blaze 2 3. Should you encounter this setback, follow this guide diligently to revive your Lava Blaze 2 3 and have it up and running again.

Scenario 1. Phone Not Charged

A Lava Blaze 2 4 not turning on might simply be a victim of a drained battery due to lack of charging. Several factors could lead to this, including a damaged charging cable or adapter. Moreover, issues with the power source or a malfunctioning charging port can be the issue.

Reason 1. Damaged Charging Cable or Adapter

Solution: Replace the charging cable or adapter with a known working one. Try using a different USB-C cable and adapter to ensure it’s not a faulty connection.

Reason 2. Faulty Power Source

Solution: Verify the power source by trying different outlets or USB ports. Ensure the power source is functional by testing it with another device.

Reason 3. Charging Port Issues

Solution: Check the charging port thoroughly to identify any dirt, debris, or signs of damage. Gently clean the port using compressed air or a small brush. If there’s visible damage, consider professional repair services.

Scenario 2. Check for Damages

Sometimes, a Lava Blaze 2 3 might not turn on due to physical damage incurred by the Lava Blaze 2 device. Instances such as accidental drops, exposure to water or moisture, or even hardware malfunctions can be the reason. These can cause visible or invisible damage, leading to Lava Blaze 2 4 won’t turn on.

Reason 1. Physical Impact or Dropping

Solution: If the Lava Blaze 2 3 has experienced a significant impact or drop, inspect the exterior for any visible damage. A cracked screen or internal hardware issue might prevent the Lava Blaze 2 device from turning on. Consider professional repair services if necessary.

Reason 2. Water or Moisture Exposure

Solution: If the Lava Blaze 2 3 has been exposed to water or moisture, immediately turn it off. Moreover, do not attempt to power it on. Place the Lava Blaze 2 device in a bowl of uncooked rice or silica gel packets to help absorb moisture. Alternatively, use a vacuum or hairdryer in a cool setting to draw out moisture. It’s crucial to let the Lava Blaze 2 device dry completely before attempting to power it on.

Reason 3. Hardware Malfunction

Solution: Check for any hardware malfunction symptoms such as overheating , unusual sounds, or a burnt smell. If any such signs are evident, refrain from attempting to turn on the Lava Blaze 2 device. You should seek professional assistance from authorized service centers.

Scenario 3. Buggy Android Smartphone

An Android smartphone, including the Lava Blaze 2 3 XL, can encounter situations where the OS becomes extremely buggy. It leads to various issues, such as the Lava Blaze 2 3 XL won’t turn on or getting stuck in a boot loop . Software glitches, corrupted system files, or incompatible apps can contribute to such problems.

Reason 1. Device Stuck in the Boot Loop

Solution: Try initiating a force restart to help fix this issue. You can do that by pressing and holding the “Power” and “Volume Up” keys at the same time for 10 seconds.

Reason 2. Software Glitches or System Crash

Solution: If encountering issues with the Lava Blaze 2 device not powering on because of software glitches or a system crash, try initiating Safe Mode by simultaneously pressing and holding the ‘Power’ button along with a Volume key. This action will cause the Power menu to be displayed. Here, tap and hold the “Power off” for a while and tap “OK” once the Safe Mode prompt appears.

Scenario 4. System Glitches? Try Wondershare Dr.Fone as a Prioritized Solution

If you have attempted the solutions mentioned above without success, it is essential to explore a more robust option. This is important if the issue seems to be a major software problem that cannot be resolved using basic troubleshooting methods. In such cases, Wondershare Dr.Fone – System Repair emerges as a viable solution. Besides, It is a perfect fit to address the “Lava Blaze 2 4 Not Turning On“ issue effectively.

Dr.Fone is designed to tackle various repairing problems that occur in Android devices. With its comprehensive setup, it can effectively address errors related to the Lava Blaze 2. These measures are aligned to meet the specific requirements of your device. This is helpful in minimizing the time needed for troubleshooting.

Key Features of Wondershare Dr.Fone

Fone allows you to repair the Android device with just a few clicks. By following the on-screen instructions, you can complete the whole process conveniently.
It fixes all Android-related problems, including the Black screen of death , the Play Store not working, and more.
This tool is compatible with all the mainstream Lava Blaze 2 models, including the latest ones.

Steps Required To Resolve System Glitches via Wondershare Dr.Fone – System Repair

Now, we’ll provide you with a guide to resolve the Not Turning On issue of your Lava Blaze 2. Go through the steps mentioned below to use Dr.Fone for the repair process.

Step 1: Open Dr.Fone and Access System Repair Tool

Starting with, you will have to activate Dr.Fone on your computer and head to the “Toolbar” panel on the left of the window. From there, navigate to the “System Repair” tool and continue with the “Android” device to proceed with the repair process.

safe & secure

4,082,195 people have downloaded it

Step 2: Start Android System Repair

In the next step, choose the “Start” button that appears, by which your device will be recognized. You have to put in the “Name, Model, Country, and Carrier” details of the Lava Blaze 2 device and hit the “Next” option. Then, you need to put your Lava Blaze 2 on Download Mode following the on-screen instructions.

Step 3: Utilize the Firmware

Afterward, the firmware will start to download automatically once the Lava Blaze 2 device enters a Download Mode. You need to select the “Fix Now” button and continue typing in a “000000” code. Then, proceed with the “Confirm” option to install the firmware on your device.

Step 4: End the System Repair of Android

Lastly, the repair process will get started and can be viewed in a progress bar. Once it ends, hit the “Done” button to conclude the activity, and check your device to see if it starts properly.

Scenario 5. Need for a Power Cycle

At times, an Android device, including the Lava Blaze 2 3/4, might benefit from a power cycle procedure. This process involves completely refreshing the Lava Blaze 2 device’s system. It potentially my Lava Blaze 2 3 won’t turn on issues, temporary bugs, or system hang-ups. These issues prevent the Lava Blaze 2 device from turning on or functioning properly.

Reason 1. System Freeze or Unresponsive Device

Solution: If the Lava Blaze 2 3/4 is unresponsive or frozen, perform a forced restart by holding down the “Power” and “Volume Up” for about 10 seconds. This action should force the Lava Blaze 2 device to shut down and reboot, potentially resolving the issue.

Reason 2. Battery Optimization and Refreshment

Solution: Sometimes, a power cycle helps optimize the Lava Blaze 2 device’s battery performance and refreshes the system. Allow the Lava Blaze 2 3/4 to completely power down, charge it for at least 30 minutes, then attempt to turn it on.

Reason 3. Software Hang-Up or Temporary Glitch

Solution. To shut down your Lava Blaze 2 3/4, press and hold the power button, then choose ‘Power Off’ from the menu that appears. After the Lava Blaze 2 device powers down, wait for about 30 seconds to 1 minute to ensure it has fully shut down before moving forward. Subsequently, press and hold the power button until the Google logo displays to restart your device.

Scenario 6. Software Damaged? Restore Immediately

When an Android device experiences severe software damage, it can lead to major issues like the Lava Blaze 2 3 won’t turn on. This can hinder the functionality of the Lava Blaze 2 device. It also includes the inability to turn on or persistent system malfunctions. In such cases, performing a complete phone restore becomes a necessary solution:

Reason 1. Corrupted System Files or Firmware Issues

Solution. In cases of severe software damage or corruption of system files, performing a settings reset becomes imperative. It is to restore the Lava Blaze 2 device to its default settings and resolve underlying issues.

Reason 2. Factory Reset as a Solution

Performing a factory reset serves as the ultimate solution. This is true when facing critical software damage that leads to a non-responsive Lava Blaze 2 3/4. This process erases all user data, apps, settings, and files stored on the Lava Blaze 2 device, reverting it to its original factory state.

Steps To Perform a Factory Reset on Lava Blaze 2 3/4

Step 1. Access the “Settings” application on your Lava Blaze 2 3/4. Then, navigate through the menu until you locate the “System” category located further down the list. Within the “System” settings, tap the last option named “Reset Options.”

Step 2. On the following screen, press the “Erase All Data (Factory Reset)” option. Afterward, follow the on-screen instructions to complete the process.

Scenario 7. Phone Hangs on Installed App

There are scenarios where a phone, like the Lava Blaze 2 3, hangs or gets stuck on a specific installed app. It happens during the startup process, and it can prevent the Lava Blaze 2 device from turning on properly. This issue often arises due to a malfunctioning or poorly coded app. This app disrupts the Lava Blaze 2 device’s startup routine, causing Lava Blaze 2 4 won’t turn on.

Reason 1. Third-Party Apps Interference

Solution: Start by booting the Lava Blaze 2 3 into Safe Mode. This mode disables third-party apps, allowing you to access the Lava Blaze 2 device without interference from downloaded applications.

Reason 2. Problematic App

Solution: While in Safe Mode, observe if the Lava Blaze 2 device boots up properly. If it successfully boots, it suggests that a third-party application is causing the problem. To pinpoint the problematic app, uninstall recently added apps individually and restart the Lava Blaze 2 device after each removal. This process helps pinpoint the problematic app causing the hang during startup.

Reason 3. Stacked Up App Cache and Data

Solution: If the problematic app is identified, try clearing its cache and data. Go to Settings and then access “Apps.” Within “Apps,” find the Problematic App and tap “Storage & cache.” On the subsequent display, select “Clear cache “ and “Clear storage” to restore the application to its original settings. After restarting the Lava Blaze 2 device, verify whether the problem persists.

Reason 4. Outdated Application

Solution: If the application is essential, ensure to seek updates within the Google Play Store. Updating the app to its latest version could potentially resolve any compatibility issues. Alternatively, if updates are not available or don’t resolve the problem, consider uninstalling and reinstalling the app.

Conclusion

In conclusion, this article has aimed to address the perplexing issue of a Lava Blaze 2 3 won’t turn on. It offered a range of solutions depending on different underlying reasons. The guide included basic methods like checking for charging issues and examining hardware damage. Moreover, it included advanced techniques like software repair tools such as Wondershare Dr.Fone.

Users are encouraged to follow the step-by-step instructions outlined here. These solutions can serve as effective remedies for resolving the problem. For more in-depth and advanced solutions, considering Dr.Fone stands as a significant option. It offers a robust system repair feature for resolving intricate software-related issues.

safe & secure

3,673,294 people have downloaded it

Fix Guide

How to Fix the Soft Bricked Lava Blaze 2? | Dr.fone