How to Fix the Soft Bricked Motorola Razr 40 Ultra?

Bricked phone is a serious problem, as your brick smartphone could be suffering from a soft brick or hard brick problem, and must be dealt with carefully. It is very common to see a brick smartphone these days. If you are wondering what exactly is a bricked phone, here is your answer.

A bricked phone, hard brick or soft brick, is a smartphone which refuses to start or boot all the way up the home/main screen of the Motorola Razr 40 Ultra device. This issue is observed within most Android phones because users have a tendency to tamper with the Motorola Razr 40 Ultra device settings, flashing new and customized ROMs and tweaking with the essential files. Playing around with the phone’s internal set-up leads to such errors, worst of them being a brick smartphone. Usually, a bricked phone does not switch on and stays frozen at the Motorola Razr 40 Ultra device logo, a blank screen or even worse, doesn’t respond to any command, even the power on command.

If you are confused about the soft brick and hard brick problems and looking for solutions to fix your priced phone, then here is all you need to know.

Read on to find out more.

Part 1: What is the difference between soft brick and hard brick?

To begin with, let us understand the basic difference between a soft brick and hard brick issue. Both versions of a bricked phone prevent it from booting but differ in their causes and gravity of the problem.

A soft-brick problem is caused merely by a software error/crash and makes your device switch on automatically every time you manually turn it off. This phenomenon is referred to as Boot Loop. Soft bricked Android phones are not as difficult to fix as the hard bricked Android phones. It is convenient to say that a soft bricked phone only boots up half-way and not fully, whereas a hard bricked device does not switch on at all. A hard brick error is thus caused when the kernel, which is nothing but an interface for the software to communicate with the hardware, is tampered with. A hard bricked phone is not recognized by your PC when plugged in and is a serious problem. It requires troubleshooting techniques and cannot be easily fixed as the soft brick problem.

Hard bricked phones are a rare sight, but the soft brick is very common. Given below are ways to fix a soft brick Android phone. The techniques listed here are the best and the most efficient ways to get your phone back to its normal working conditions without losing your important data or damaging your device or its software.

Part 2: Stuck at the Boot Loop

This is the first sign of a soft bricked Android phone. Boot Loop is nothing but when your phone does not remain switched off and turns itself on automatically, and freezes at the logo screen or blank screen, every time you manually try to power it off.

Stuck at boot loop problem can be fixed by clearing your Cache partitions. These partitions are nothing but storage locations for your modem, kernels, system files, drivers and built-in Apps data.

It is advisable to clear Cache partitions regularly to keep your phone free from such glitches.

Since the phone refuses to boot, Cache can be cleared from entering into the Recovery Mode. Different Android devices have different ways to put it in recovery mode. Normally pressing the power key and volume down key helps, but you may refer to your phone’s guide for better understanding and then follow the steps given below to clear the cache partition:

Once you are the recovery mode screen, you will see a number of options as shown in the screenshot.

Use the volume down key to scroll down and select ”Wipe cache partition” as shown below.

>

After the process is completed, select “Reboot System” which is the first option in the recovery mode screen.

This method will help you erase all the clogged up and unwanted files. You may loose some App related data, but that is a small price to pay to fix your bricked phone.

If this method does not boot up your brick smartphone and the problem still persists, there are two more things you can try. Read ahead to find out about them.

Part 3: Booting straight into recovery mode

If your bricked phone does not boot up to your Home Screen or Lock screen and instead boots directly into Recovery Mode, there is not much left to do. Booting straight into recovery mode is undoubtedly a soft brick error but it also indicates a possible problem with your current ROM. The only option you have to flash a new ROM to reboot your bricked phone back to its normal functioning.

To flash a new ROM:

Firstly, you must root your phone and unlock the Bootloader. Every phone’s mechanism to unlock the bootloader is different, thus, we suggest to refer to your user manual.

Once the Bootloader is unlocked, take a backup of all your data by selecting “Backup” or “Android” back in recovery mode. The process should not take long and all you need to do is tap “OK” to config backup.

In this step, download a ROM of your choice and store it in your SD Card. Insert the SD Card in your phone to begin the flashing process.

Once at the recovery mode, select “Install Zip from SD Card” from the options.

Scroll down using the volume key and use the power key to select the downloaded ROM.

This might take a few minutes of your time, but once the process is complete, reboot your phone.

Hopefully, your bricked phone will not boot normally and work smoothly.

Part 4: Booting straight into Bootloader

If your bricked phone boots straight into Bootloader, then this a serious issue and must not be taken lightly. Flashing a new ROM or clearing cache partitions are of little help in such a brick smartphone situation. Booting straight into Bootloader is a peculiar soft bricked Android phone feature and can be tackled only by downloading and flashing your original ROM from the manufacturer. In order to do so, a detailed study about your manufacturer’s ROM, ways to download and flash must be carried out. Since different Android phones come with different types of ROMs, it difficult to cover all the aspects about the different types of ROMs.

Brick smartphone problem has become more prominent than phone freezing or hanging issue. Android users are often seen looking for solutions to fix their soft brick and hard brick phones. Android phones are prone to get bricked and thus, it is important for us to know about the three techniques given above. These methods have been tried, tested and recommended by ay affected bricked phone users. Therefore, these tips are reliable and worth a try. So if your phone acts stubborn and refuses to boot normally, examine the problem carefully and adopt one of the solutions given above which best suits your situation.

Motorola Razr 40 Ultra Screen Unresponsive? Here’s How to Fix It

Motorola Razr 40 Ultra phones have become increasingly popular due to their advanced features, sleek designs, and affordable prices. These phones offer many benefits, including high-quality cameras, long battery life, and fast processing speeds. However, sometimes users may encounter problems such as a Motorola Razr 40 Ultra touch screen not working, which can be frustrating and difficult.

This article aims to provide solutions for Motorola Razr 40 Ultra phone users experiencing screen unresponsiveness. We will explore various reasons this issue may occur and discuss step-by-step instructions for fixing the problem. So, if your Motorola Razr 40 Ultra touchscreen is not working, don’t worry – we’ve got you covered!

What Causes A Motorola Razr 40 Ultra Screen Unresponsive?

There are several reasons why a Motorola Razr 40 Ultra phone’s screen may become unresponsive. Some common causes include software issues, hardware problems, or issues with the touchscreen itself. It’s essential to identify the root cause of the problem to fix it properly.

Below are some possible causes of Motorola Razr 40 Ultra screen unresponsiveness, along with explanations of each.

• Soft-bricked software: Soft-bricking refers to the state where the phone is stuck in an infinite boot loop or unable to boot. It can occur due to corrupt system files, outdated firmware, or unsuccessful updates. For example, some Motorola Razr 40 Ultra Y2 and 5A users have reported their screens getting stuck on the boot logo after a software update, rendering the Motorola Razr 40 Ultra device unusable.

• Equipment is worn out: Hardware problems can also cause Motorola Razr 40 Ultra screens to become unresponsive. It can be due to worn-out equipment, such as a damaged LCD screen, malfunctioning touch sensor, or loose ribbon cables. These issues can also occur in any Motorola Razr 40 Ultra model, including the Y2 and 5A.

• **Touchscreen problems:**Sometimes, the touchscreen itself can become unresponsive for various reasons. For instance, Motorola Razr 40 Ultra Y2 and 5A users may face this issue if they have accidentally dropped their phone, exposed it to water, or used an incompatible screen protector. It can result in a damaged or malfunctioning touchscreen, making it difficult or impossible to operate the phone.

The Common Solutions To Solve A Motorola Razr 40 Ultra Screen Unresponsive

In the previous section, we identified the possible causes of Motorola Razr 40 Ultra screen unresponsiveness, including soft-bricked software, hardware problems, and touchscreen issues. While the underlying reasons for screen unresponsiveness can be varied and complex, some common solutions can help resolve the issue. Here are three of the most common solutions to address tablet screen unresponsiveness, no matter the Motorola Razr 40 Ultra model.

1. Restart The Device

Restarting the phone is typically the initial solution that comes to mind when we encounter the Motorola Razr 40 Ultra black screen problem. It’s a simple and widely used method to address the issue, as the black screen problem could be caused by a software glitch, which can often be resolved by freeing up the phone’s memory.

It is the most commonly used method to fix Motorola Razr 40 Ultra’s touch screen and power button issues, such as unresponsiveness. By restarting the Motorola Razr 40 Ultra device, background processes are disabled, and memory is freed up, allowing programs to run smoothly and potentially resolve the problem. To restart a Motorola Razr 40 Ultra device, press the Power and Volume Up buttons simultaneously, and release the Power button once the Motorola Razr 40 Ultralogo appears.

2. Leave The Phone And Let The Battery Drain Completely

Sometimes, the tablet screen may become unresponsive due to a software issue preventing the Motorola Razr 40 Ultra device from functioning correctly. Leaving the Motorola Razr 40 Ultra device unused and draining the battery helps resolve these issues. After fully discharging the battery, the Motorola Razr 40 Ultra device can be recharged and turned back on, potentially resolving the issue.

3. Contact Custom Service

If restarting the Motorola Razr 40 Ultra device or allowing the battery to drain doesn’t resolve the issue, seeking professional assistance is recommended. The manufacturer may provide additional troubleshooting steps or recommend sending the Motorola Razr 40 Ultra device in for repair or replacement. It’s important to check the warranty before contacting customer service, which may affect repair or replacement options.

In addition to the common solutions we discussed earlier, some model-specific solutions can help resolve the screen unresponsiveness issue on Motorola Razr 40 Ultra Y2 and Motorola Razr 40 Ultra 5A.

4. Optimize Device Performance

One solution is to optimize the Motorola Razr 40 Ultra device performance by clearing the cache, removing unwanted apps, and disabling unnecessary features. This method can help free up memory and resolve the issue.

You can clear your cached data using the default settings.

• Select Settings> Storage > Cached Data.
• To clear the cache, select Clear Cache.

5. Back Up And Factory Reset

Another solution is to back up the Motorola Razr 40 Ultra device and perform a factory reset, which can help reset the Motorola Razr 40 Ultra device to its original state and remove any software glitches that may be causing the screen unresponsiveness. The factory settings on your phone will restore any data saved by third-party applications and some of the phone’s settings when it was first built. Note that this method erases all data from the Motorola Razr 40 Ultra device, so it should only be considered a last resort.

In the following steps, we will show you how to format the Motorola Razr 40 Ultra Redmi 5A to erase all your data and restore it to its factory state.

• Open the Settings.
• Navigate to the Additional settings section of the Motorola Razr 40 Ultra Redmi 5A settings.
• Please scroll down the screen until you reach the Backup & reset option, then click to access it.
• ClickErase all data (factory reset) to restore the network settings and applications, or completely reset the Motorola Razr 40 Ultra Redmi 5A.
• Select All files on the phoneto make a complete format of the Motorola Razr 40 Ultra Redmi 5A.

6. Using Dr. Fone Repair

If none of the above solutions worked, you can try using Dr. Fone Repair. This software is designed to fix various software issues on Android phones, including Motorola Razr 40 Ultra devices. It can fix issues such as screen stuck on boot, black screen, and other software-related problems. Dr. Fone Repair is easy to use and can protect your data and files on your phone.

Here’s how to fix repair screen unresponsiveness or any software-related issues on Motorola Razr 40 Ultra Y2 and Motorola Razr 40 Ultra 5A using Dr. Fone Repair:

• Begin by installing and opening Dr.Foneon your PC.
• Once opened, select the ‘System Repair’ option and connect your Android smartphone to your PC via USB cable.
• On the next screen, choose “Android****Repair“ from the list of available options.
• Click on the “Start“ button to initiate the repair process.
• You will then be prompted to enter the required device information such as the Motorola Razr 40 Ultra device name, model number, and firmware version.
• Once you have entered the necessary information, click on the ‘Next’ button to proceed.
• Follow the on-screen instructions carefully to repair your Motorola Razr 40 Ultra.

How To Avoid A Motorola Razr 40 Ultra Screen Unresponsive?

To avoid facing a Motorola Razr 40 Ultra screen unresponsive issue, users can take several preventative measures. One important step is to update the Motorola Razr 40 Ultra phone regularly to ensure the software is up to date and all bugs and glitches are fixed. Users can also use tools like Dr. Fone to regularly manage and repair data, including clearing cache and removing unwanted apps. It is also important to use quality charging cables and avoid exposing the Motorola Razr 40 Ultra device to extreme temperatures or humidity, which can damage the internal components and potentially cause screen unresponsiveness. Finally, users can avoid dropping or mishandling the Motorola Razr 40 Ultra device, leading to physical damage and causing the screen to become unresponsive. Users can help prevent screen unresponsiveness by taking these steps and ensuring their Motorola Razr 40 Ultra device runs smoothly and reliably.

safe & secure

Conclusion

Encountering a Motorola Razr 40 Ultra screen unresponsive issue can be a common problem for some Motorola Razr 40 Ultra phone users. However, with the solutions we have provided in this article, you can effectively solve the problem and get your phone back up and running in no time. It’s important to remember to regularly back up your data and take preventative measures, such as avoiding harmful malware and keeping your phone updated, to avoid experiencing this issue in the future.

By using reliable software, like Dr.Fone Repair, you can ensure that your Motorola Razr 40 Ultra phone is well-maintained and operating smoothly. With these solutions and tips, you can enjoy the benefits of your Motorola Razr 40 Ultra phone without any interruptions.

11 Proven Solutions to Fix Google Play Store Not Working Issue on Motorola Razr 40 Ultra

Google Play Store is a necessary and bundled service of any Android device. This app is required to download or even run any apps. So, getting an error like Play store not working or Play Store crashing is very unfortunate and a matter of a headache. Here we tried to put the best solution to overcome this issue. Keep reading this article for all the 11 best solutions.

Part 1. The recommended method to fix Google Play Store issues

If you search on the internet, you may find various tricks dealing with Google Play Store not working issue. However, either to try each of them or choose several to follow would certainly cost a lot of time. What’s more, we are not sure whether they will really work. Therefore, we would recommend you with a more effective and fast way, that is to use Dr.Fone - System Repair (Android) , a dedicated Android repair tool to fix Google Play Store, not working issues just in one click.

Dr.Fone - System Repair (Android)

A most effective method to fix Google Play Store not working

• Fix all Android system issues like the black screen of death, won’t turn on, system UI not working, etc.
• Industry’s 1st tool for one-click Android repair.
• Supports all the new Motorola Razr 40 Ultra devices like Galaxy S8, S9, etc.
• Step-by-step instructions provided. No technicals skills required.

3981454 people have downloaded it

Brief steps to guide you through the process of fixing Google Play Store not working (followed by video tutorial):

1. Get this tool downloaded on your computer. Install and launch it, and you can find the following welcome screen displayed.

1. Select the option “System Repair”. In the new interface, click on the “Android Repair” tab.

1. Start fixing Google Play Store not working by clicking “Start”. Select and confirm the correct model details as instructed.

1. Activate the Download mode from your Motorola Razr 40 Ultra.

1. After entering the Download mode, the Dr.Fone tool starts to download the correct firmware to your Android.

1. The downloaded firmware will be loaded and flashed to your Motorola Razr 40 Ultra to fix the Google Play Store not working issue.

1. Wait until the Android repair process is complete. Start your Android and Google Play Store, you can then find that the Google Play Store not working issue no longer exists.

Video tutorial to fix Google Play Store not working

Part 2: Other 10 common methods to fix Google Play Store issues

1. Fix Date and Time settings

Sometimes Google creates a problem connecting with the Play Store or Play store crashing due to the wrong date and time. The first and most common thing is you have to check if the date and time are updated or not. If not, update it first by following the below step by step guide.

Step 1 – First, go to the “Settings” of your device. Find ‘Date and time’ and tap on it.

Step 2 – Now you can see several options. Select “Automatic date and time”. This should override the wrong date and time your device have. Else, deselect the tick beside that option and select the date and time manually.

Step 3 – Now, go to the Play store and try to connect again. This should be working without any problem now.

2. Cleaning of Cache data of Play Store

This may happen that sometimes Google Play Store stopped working due to excessive unnecessary data stored in the cache of the Motorola Razr 40 Ultra device. So, clearing unnecessary data is very important to keep the application run smoothly. To do this, you need to follow the below steps.

Step 1 – Firstly, go to “Settings” on your device.

Step 2 – Now, navigate to the “Apps” option available at the settings menu.

Step 3 – Here you can find the “Google Play Store” app listed. Open it by tapping.

Step 4 – Now, you can find a screen like below. Tap on “Clear cache” to remove all the cache from the application.

Now, again try to open Google Play Store and you may successfully overcome the Play Store not working issue. If not, check the next solution.

3. Reset Play store by Clear data

If the above solution is not working for you, you might try this option instead. This step will erase all the app data, settings, etc so that it can be set up a fresh one. This will also fix the Google Play store not working issue. For this solution, use the following method step by step.

Step 1 – Like the previous method, head towards the settings and then find “Apps”

Step 2 – Now find “Google Play Store” and open it.

Step 3 – Now, instead of tapping “Clear cache”, tap on “Clear data”. This will erase all the data and settings from the Google Play store.

After this, open “Google Play Store” and now your problem might be solved now.

4. Reconnecting the Google account

Sometimes it may happen that removing and reconnecting your Google account may solve the Play Store not working issue. To do this, you need to follow the instructions below.

Step 1 – Go to the “Settings” and then find “Accounts”.

Step 2 – Upon opening the option, select “Google”. Now you can see your Gmail ID listed there. Tap on it.

Step 3 – Now click on the top right side three dots or “more” option. Here you can find the “Remove account” option. Select it to remove the Google Account from your Mobile.

Now, go back and try to open Google Play Store again. This should work now and enter your Google ID and password again to continue. If it’s still not working, move to the next solution.

5. Reinstall the latest version of Google Play Store

Google Play store can’t be uninstalled completed completely from your Motorola Razr 40 Ultra. But disabling and reinstalling its latest version can resolve the Play Store crashing issue. For doing this, just follow the below guide.

Step 1 – First of all, go to “Settings” and then move on to “Security”. Then find “Device administration” here.

Step 2 – Upon clicking on this option, you can find “Android device manager”. Uncheck this and disable.

Step 3 – Now you can be able to uninstall Google play service by going into application manager.

Step 4 – After that, try to open any app that requires Google Play store to open, and that will automatically guide you to install the Google Play service. Now install the updated version of the Google Play service.

After installing, your problem might be solved by now. If not, try the next solution.

6. Clear Google Service Framework Cache

Besides the Google Play store, this is important to keep healthy the Google Service Framework as well. The cache and unnecessary data should be removed from there also. Follow the steps below.

Step 1 – Go to settings and then tap on “Application Manager”

Step 2 – Here you can find “Google Service Framework”. Open it.

Step 3 – Now, tap on “Clear cache”. And you are done.

Now go back and try to open Google Play store again. This might solve the Google Play Store has stopped the problem by now. If not, check the next solution.

7. Disable the VPN

The VPN is a service to get all the media outside your geographic location. This is also used to install a country-specific app in another country. But sometimes it can create a problem with Play Store crashing.  So, this is recommended to try disabling the VPN.

Step 1 – Go to the settings of your device.

Step 2 – Under the “networks”, click on “More”.

Step 3 – Here you can find “VPN”.  Tap on it and turn it off.

Now, again go back and try to open the Google Play Store. This may solve your problem now. If not, check the next solution.

8. Force stop Google Play Service

Google Play Store needs to be restart just like your PC. This is a really helpful and common trick to overcome the Play Store crashing issue on your Motorola Razr 40 Ultra. To do this, follow the below steps.

Step 1- Go to settings and then go to the “Application Manager”.

Step 2 – Now find “Google Play Store” and click on it.

Step 3 – Here click on “Force Stop”. This allows the Google Play Store to stop.

Now, try to open Google Play store again and this time the service is being restarted and might work properly. If not, try the next solution.

9. Try a Soft Reset of your device

This easy to use solution will remove all the unnecessary temporary files of your device, close all recent apps, and make it clean. This is just rebooting your device. It won’t delete any data from your device.

Step 1 – Long press the “Power” button on your device.

Step 2 – Now, click on ‘Reboot’ or ‘Restart’ option. Your device will restart in some time.

After restarting, try to open the Google Play Store again and this time you should succeed. If any case, it’s not opening, try the last (but not the least) method by hard reset your Android.

10. Hard reset your device

If you have done with all of the above solutions and still Play Store crashing, and you are aggressive to get it, then only try this method. Using this method will delete all the data of your device. So take a backup of the whole. Follow the step by step instruction below.

Step 1 – Go to setting and find “backup and reset” there.

Step 2 – Click on it. And then Click on the “Factory data reset” option.

Step 3 – Now confirm your action and tap on the “Reset device”.

This will take a while to reset your device completely. After completion, start the Google Play Store and set up as a new device.

The above methods are the best 11 among all the solutions you can get for your Play Store not working on wifi or Play Store crashing error. Try one by one and you might get rid of this problem.

Also read: