How to Fix the Soft Bricked Realme C67 5G? | Dr.fone

How to Fix the Soft Bricked Realme C67 5G? | Dr.fone

Abel Lv11

How to Fix the Soft Bricked Realme C67 5G?

Bricked phone is a serious problem, as your brick smartphone could be suffering from a soft brick or hard brick problem, and must be dealt with carefully. It is very common to see a brick smartphone these days. If you are wondering what exactly is a bricked phone, here is your answer.

A bricked phone, hard brick or soft brick, is a smartphone which refuses to start or boot all the way up the home/main screen of the Realme C67 5G device. This issue is observed within most Android phones because users have a tendency to tamper with the Realme C67 5G device settings, flashing new and customized ROMs and tweaking with the essential files. Playing around with the phone’s internal set-up leads to such errors, worst of them being a brick smartphone. Usually, a bricked phone does not switch on and stays frozen at the Realme C67 5G device logo, a blank screen or even worse, doesn’t respond to any command, even the power on command.

If you are confused about the soft brick and hard brick problems and looking for solutions to fix your priced phone, then here is all you need to know.

Read on to find out more.

Part 1: What is the difference between soft brick and hard brick?

To begin with, let us understand the basic difference between a soft brick and hard brick issue. Both versions of a bricked phone prevent it from booting but differ in their causes and gravity of the problem.

A soft-brick problem is caused merely by a software error/crash and makes your device switch on automatically every time you manually turn it off. This phenomenon is referred to as Boot Loop. Soft bricked Android phones are not as difficult to fix as the hard bricked Android phones. It is convenient to say that a soft bricked phone only boots up half-way and not fully, whereas a hard bricked device does not switch on at all. A hard brick error is thus caused when the kernel, which is nothing but an interface for the software to communicate with the hardware, is tampered with. A hard bricked phone is not recognized by your PC when plugged in and is a serious problem. It requires troubleshooting techniques and cannot be easily fixed as the soft brick problem.

hard bricked v/s soft bricked

Hard bricked phones are a rare sight, but the soft brick is very common. Given below are ways to fix a soft brick Android phone. The techniques listed here are the best and the most efficient ways to get your phone back to its normal working conditions without losing your important data or damaging your device or its software.

Part 2: Stuck at the Boot Loop

This is the first sign of a soft bricked Android phone. Boot Loop is nothing but when your phone does not remain switched off and turns itself on automatically, and freezes at the logo screen or blank screen, every time you manually try to power it off.

Stuck at boot loop problem can be fixed by clearing your Cache partitions. These partitions are nothing but storage locations for your modem, kernels, system files, drivers and built-in Apps data.

It is advisable to clear Cache partitions regularly to keep your phone free from such glitches.

Since the phone refuses to boot, Cache can be cleared from entering into the Recovery Mode. Different Android devices have different ways to put it in recovery mode. Normally pressing the power key and volume down key helps, but you may refer to your phone’s guide for better understanding and then follow the steps given below to clear the cache partition:

Once you are the recovery mode screen, you will see a number of options as shown in the screenshot.

recovery mode

Use the volume down key to scroll down and select ”Wipe cache partition” as shown below.

”Wipe cache partition”>

After the process is completed, select “Reboot System” which is the first option in the recovery mode screen.

This method will help you erase all the clogged up and unwanted files. You may loose some App related data, but that is a small price to pay to fix your bricked phone.

If this method does not boot up your brick smartphone and the problem still persists, there are two more things you can try. Read ahead to find out about them.

Part 3: Booting straight into recovery mode

If your bricked phone does not boot up to your Home Screen or Lock screen and instead boots directly into Recovery Mode, there is not much left to do. Booting straight into recovery mode is undoubtedly a soft brick error but it also indicates a possible problem with your current ROM. The only option you have to flash a new ROM to reboot your bricked phone back to its normal functioning.

To flash a new ROM:

Firstly, you must root your phone and unlock the Bootloader. Every phone’s mechanism to unlock the bootloader is different, thus, we suggest to refer to your user manual.

Once the Bootloader is unlocked, take a backup of all your data by selecting “Backup” or “Android” back in recovery mode. The process should not take long and all you need to do is tap “OK” to config backup.

backup and restore

In this step, download a ROM of your choice and store it in your SD Card. Insert the SD Card in your phone to begin the flashing process.

Once at the recovery mode, select “Install Zip from SD Card” from the options.

install zip from sdcard

Scroll down using the volume key and use the power key to select the downloaded ROM.

Scroll down

select the downloaded ROM

This might take a few minutes of your time, but once the process is complete, reboot your phone.

Hopefully, your bricked phone will not boot normally and work smoothly.

Part 4: Booting straight into Bootloader

If your bricked phone boots straight into Bootloader, then this a serious issue and must not be taken lightly. Flashing a new ROM or clearing cache partitions are of little help in such a brick smartphone situation. Booting straight into Bootloader is a peculiar soft bricked Android phone feature and can be tackled only by downloading and flashing your original ROM from the manufacturer. In order to do so, a detailed study about your manufacturer’s ROM, ways to download and flash must be carried out. Since different Android phones come with different types of ROMs, it difficult to cover all the aspects about the different types of ROMs.

Brick smartphone problem has become more prominent than phone freezing or hanging issue. Android users are often seen looking for solutions to fix their soft brick and hard brick phones. Android phones are prone to get bricked and thus, it is important for us to know about the three techniques given above. These methods have been tried, tested and recommended by ay affected bricked phone users. Therefore, these tips are reliable and worth a try. So if your phone acts stubborn and refuses to boot normally, examine the problem carefully and adopt one of the solutions given above which best suits your situation.

Fix Unfortunately Settings Has Stopped on Realme C67 5G Quickly

All of you, sooner or later, must have found the “Unfortunately Settings has stopped” error on your Realme C67 5G. The problem can occur if the Settings keeps stopping or crashing. Many times, you may try to open the Settings but it doesn’t even open. Or possibly, it may freeze after getting opened thereby hampering the Realme C67 5G device’s performance.

unfortunately settings has stopped

Well! There can be a number of reasons why this thing happens. For instance, custom ROM installations, not enough space in the Realme C67 5G device or perhaps an outdated version of Android. If you are struggling with the same issue and want to know what to do when Android Settings is not responding, this post will help you. We have explained everything in detail along with the solutions. So, scroll down and get things sorted.

Part 1: Clear the cache of Settings and Google Play Service

It is possible that the corrupted cache files are responsible for this error. Hence, as the first tip, we would like you to clear the Settings cache if that is what triggers the “Unfortunately Settings has stopped” issue. Clearing it would definitely make Settings run appropriately. And The steps to clear the cache of the Google Play Services app are similar. Here is how to clear the cache of Settings:

  1. Open “Settings” on your Realme C67 5G and choose “Apps & Notifications”/”Apps”/”Application Manager” (the option may differ on different devices).
  2. In the list of applications, look for “Settings” and open it.
  3. Now, select “Storage” followed by “Clear Cache”.

settings crashing - clear cache

Note: In some phones, the “Clear Cache” option may come after tapping on “Force Stop”. Therefore, go accordingly without getting confused.

Part 2: Clear the Android phone’s RAM and retry

As the next tip, we would like to suggest you clear your device’s RAM by ceasing the running apps in the background. RAM, if at the increased level, is responsible for the Realme C67 5G device’s freezing, poor performance, and most probably is the reason behind crashing Settings. Also, if the apps in the background keep running, they might conflict with the Settings and stop it to perform properly. Therefore clearing RAM is important when Android Settings is not responding. Here is how to do it.

  1. Firstly, you need to go to the Recent apps screen. For this, long-press the Home key.
    Note: Please note that different devices have different ways to go to the Recent apps screen. Do it according to the Realme C67 5G device you own.
  2. Now, swipe the apps and tap on the clear option. You will be able to notice the amount of RAM cleared

settings crashing - clear ram

Part 3: Uninstall the Google update

Uninstalling Google Play Store updates has also responded well to many users. It has worked in the case of the “Unfortunately Settings has stopped” error. So, we would also like to suggest you use this tip if the others don’t work. Here are the steps to be followed for this.

  1. Open “Settings” on your Android and tap on “Application manager” or “Apps” or “Application.
  2. Now, head to all the apps and select “Google Play Store” from there.
  3. Tap on “Uninstall Updates” and restart your device to check if the crashing Settings issue has been resolved.

settings crashing - uninstall update

Part 4: Uninstall the custom ROM or re-flash the stock ROM

Using a custom ROM on your device brings up this problem due to incompatibility or improper installation. Therefore, you should either uninstall the custom ROM or re-flash the stock ROM. in order to re-flash the stock ROM of your Realme C67 5G, the best way would be Dr.Fone - System Repair (Android). It offers one-click functionality to flash stock ROM and that too with full security. Supporting all Realme C67 5G devices, it ranks among its counterparts when it comes to fixing crashing Phone app issues or any other Android system issue. It is loaded with the beneficial features which are discussed below.

Dr.Fone - System Repair (Android)

Android repair tool to fix “Unfortunately, Settings Has Stopped”

  • You needn’t be a tech-savvy to use this
  • Supports a wide range of Android devices easily, 1000+ being more precise
  • One-click tool and supports any sort of Android system issue
  • Higher success rate along with millions of trusted users
  • Trustworthy and offers an extremely easy interface

4,635,310 people have downloaded it

How to fix crashing Settings using Dr.Fone - System Repair (Android)

Step 1: Download Tool

Visit the official website of Dr.Fone and download the toolbox from there. Go for the installation process and wait until the installation gets over. Launch it now and choose the “System Repair” tab from the main window.

Android settings not responding- download tool

Step 2: Get the Phone Connected

With the help of a USB cable, plug your Realme C67 5G into the PC. Upon proper connection, hit on the “Android Repair” option from the left panel.

Android settings not responding - connect android

Step 3: Feed Correct Information

In the next window, you need to fill in some necessary information like the name and model of the mobile device. Enter details like country and career. Check once and hit on “Next”.

Android settings not responding - enter details

Step 4: Enter Download Mode

Now, you need to take your device into Download mode. For this, you need to follow the onscreen instruction according to your device. Click “Next” and you will notice the firmware downloading progress on your screen.

Android settings not responding - download mode

Step 5: Repair the Issue

Once the firmware is completely downloaded, your Realme C67 5G will automatically start getting repaired. Stay there and you will receive a notification that the repair is done.

Android settings not responding - fix the issue

Part 5: Wipe cache partition to restore Settings

Like RAM, wiping cache is also vital so as to make the Realme C67 5G device’s operation smoother. And when you are getting the “Unfortunately Settings has stopped” error, it might be due to the collected cache. To remove it, you will need to enter the recovery mode. And the steps for recovery mode range from device to device. For instance, Realme C67 5G users have to press the “Home”, “Power” and “Volume Up” buttons. Similarly, HTC and LG device users are supposed to press the “Volume Down” and “Power” buttons. For Nexus, it is “Volume Up, Down” and Power key combinations. Therefore, before going further, make sure what device you own and enter the recovery mode according to it. Now, follow the detailed guide below to wipe the cache partition in order to fix crashing Settings.

  1. Primarily, turn off the Realme C67 5G device and enter the recovery mode by pressing the respective key combinations.
  2. You will notice a Recovery screen on your device.
  3. On showing up the recovery screen, look for the “Wipe Cache partition” option and use the “Volume Down” and “Volume Up” buttons to scroll down and up respectively.
  4. On reaching the required option, press the “Power” button to start wiping.
  5. Once finished, click the reboot option and the Realme C67 5G device will be rebooted, fixing the issue hopefully.

Android settings not responding - cache partition

Part 6: Factory reset your Android

You can also opt for Factory resetting your device to fix the issue of Settings keeps stopping. By removing everything from the Realme C67 5G device, it will make your device run properly. If you have important data on your device, please make sure to create a backup before taking action if you don’t want to lose it. The steps are as follows.

  1. In the “Settings, go to “Backup and Reset”.
  2. Tap on “Factory data reset” followed by “Reset device”.
  3. Wait for the completion of the process and check if Settings is stopping or not after it gets rebooted.

Android settings not responding - factory reset android

Part 7: Check and update Android OS

A lot of times minor issues crop up due to the operating systems that get outdated. It is because the Realme C67 5G device needs to get updated from time-to-time for proper functioning otherwise it will not be able to match up with the fading technologies thereby coming up with issues like “Unfortunately Settings has stopped”. We recommend here you check for the available update and update your device. For this follow the guide below.

  1. Go to “Settings” and tap “About Phone” on your device.
  2. Now, hit on “System Update” and the Realme C67 5G device will look for any available update.
  3. If there is any, go along with the prompts to install it and make your phone even smarter.

Android settings not responding - update android firmware

Conclusion

If your Realme C67 5G shows the “Unfortunately Settings has stopped” error, don’t worry. This problem can come from many things like old software or cache issues. You can try easy fixes like clearing cache or updating your system. Sometimes, removing custom ROMs might be needed.

For iOS users facing similar problems, we recommend using Dr.Fone-System Repair (iOS) . It’s known for fixing many iOS problems without losing any data. Remember, a well-working device is just a few steps away!

Safe download safe & secure

How to Quickly Fix Bluetooth Not Working on Realme C67 5G

One of the key features of an Android device these days is the Bluetooth technology. This is such an important part of the phone that many of us take for granted, but as soon as the feature stops working, it can cause all kinds of problems.

Fortunately, despite there being many reasons why a problem could occur to your Bluetooth feature, there are also plenty of fixes. Today, we’re going to share with you the complete guide that details everything you need to know to get your Bluetooth up and running once again as quickly as possible.

Let’s get straight into it!

Part 1. About Bluetooth Not Working on Android

Of course, the most common problem to occur with Bluetooth technology in your Realme C67 5G is when it doesn’t connect to the Realme C67 5G device you’re trying to link it to. This could be anything from a Bluetooth headset or headphones, to a portable speaker or even an in-car audio system.

However, the problems don’t stop there. You may have problems with turning your Bluetooth settings on through your actual device. Perhaps the software simply isn’t loading, or maybe the Bluetooth feature keeps turning itself off randomly.

Due to the complicated nature of Bluetooth technology, there could be many reasons as to why your Bluetooth feature is playing up in this way, but that doesn’t mean it can’t be fixed. For the rest of this guide, we’re going to explore the nine need-to-know ways you can fix the Bluetooth problems not working on your Realme C67 5G as quickly as possible.

Part 2. 9 fixes for Bluetooth not working on Android

2.1 One click to fix Android Bluetooth issues due to Android system

Since Bluetooth is an internal technology, this indicates there’s a problem with the software or firmware of your Realme C67 5G. If something’s broken, this means you need to fix it. Fortunately, there’s a quick and easy way to do this using software known as Dr.Fone - System Repair (Android).

Dr.Fone - System Repair (Android) is a powerful Android repair tool which is hailed as many as being on the best software applications in the industry. With all the tools you need to repair your phone not just for Bluetooth errors, but basically any internal firmware problems, this is a one-shot-tool that gets the job done.

Dr.Fone - System Repair (Android)

Android repair tool to fix Bluetooth issues in one click

  • Can fix most internal software and firmware issues
  • Trusted by over 50+ million people around the world
  • Supports over 1,000+ unique Android brands, manufacturers, and devices
  • Incredibly user-friendly and easy-to-use
  • Compatible with all Windows computers

3981454 people have downloaded it

To ensure you have the best experience while using the Dr.Fone - System Repair (Android) software, here’s a complete step-by-step guide on how it works when fixing your Android’s Bluetooth problems.

Step One Make your way over to the Wondershare website and download the Dr.Fone - System Repair (Android) software to either your Mac or Windows computer. Install the downloaded file by following the on-screen instructions. Once installed, open the software, so you’re on the Main Menu.

bluetooth not working on android - use a tool

Step Two Connect your Realme C67 5G to your computer using the USB cable, wait a couple of seconds, and then click the System Repair option. On the Menu on the left, click Android Repair, and then press Start.

bluetooth not working on android - select option

Step Three Next, use the drop-down menus to make sure all the information about your specific device is correct, including your device, operating system number, and carrier information. Click Next to confirm your selections.

bluetooth not working on android - confirm info

Step Four When prompted, put your phone into Download Mode needed for repairs. You can do this by following the on-screen instructions which will depend on which device you have and the available buttons.

bluetooth not working on android - download mode to fix issues

Step Five The software will now begin the repair process. This will happen automatically, and all you’ll need to do is make sure your device doesn’t disconnect during this process, and your computer doesn’t turn off.

bluetooth not working on android - start repairing

When the repair process has been completed, you’ll receive the screen below, which means you can try again if the process didn’t work, or you can disconnect your Realme C67 5G and start using it and your Bluetooth features.

2.2 Restart Android and turn on Bluetooth again

![bluetooth not working on android - restart android](https://images.wondershare.com/drfone/article/2019/04/restart-Bluetooth-Android.jpg)

One of the most common solutions in technology is simply to turn it on and off again, which is the case to happen here. By restarting your device, you can clear out any problems you may be suffering from to help it get up and running again. Here’s how;

  1. Turn your Realme C67 5G off by holding down the Power button
  2. Wait for several minutes and then turn your phone on again
  3. Wait for your phone to completely power up, so you’re on the Main Menu
  4. Navigate Settings > Bluetooth and then enable the setting
  5. Try to connect your Bluetooth device to what you were trying to do before

2.3 Clear the Bluetooth cache

android bluetooth problems - clear cache

Every service on your Realme C67 5G using a feature called a cache. This is where information is stored to help the feature run properly and give you the best experience. However, over time this can get messy and can cause problems with your Bluetooth feature.

By clearing the cache, you can restart the service and hopefully clear up any issues or problems you may be experiencing.

  1. On your phone, navigate Settings > Application Manager, and you’ll see all the apps and services on your phone. Locate and select the Bluetooth service.
  2. Select the Storage option
  3. Tap the Clear Cache option
  4. Go back of the Menu and restart your phone
  5. Now turn your Bluetooth feature on and turn connecting it to your preferred device

2.4 Remove paired devices

android bluetooth problems - remove paired devices

Sometimes, you may have a problem with the Realme C67 5G device you’re trying to connect to via Bluetooth, especially if this is a device you’ve updated. To counter and repair this, you’re going to need to remove the paired devices saved with your device and then reconnect them.

Here’s how;

  1. From the Main Menu of your Realme C67 5G, head to Settings > Bluetooth > Connected Devices.
  2. Turn Bluetooth on, and you’ll see all the connections your Realme C67 5G is paired with
  3. Go through these settings and remove/delete/forget every connection on your device
  4. Now when you go to connect to a device using Bluetooth, repair the Realme C67 5G device, enter the passcode, and use a fresh paired connection.

2.5 Use Bluetooth in safe mode

android bluetooth problems - safe mode

If you’re having problems with your connection and paired devices, sometimes you may have conflicting software faults in your device that are causing the problems. If this is the case, you’ll need to boot your Realme C67 5G in Safe Mode.

This is an operating state in which your phone will run the bare minimum services it needs to perform. If your Bluetooth works in Safe Mode, you know you have an app or a service that’s causing the problem.

Here’s how to find out;

  1. Hold the power button down, so the Android power menu turns on
  2. Long-press the power button again and the restart in Safe Mode option will come up
  3. The phone will automatically boot into Safe Mode
  4. Wait a minute on the Main Menu
  5. Now turn on your Bluetooth and connect it to your preferred device

2.6 Turn on the discoverable feature

android bluetooth problems - discoverable feature

To ensure your Bluetooth can connect to other devices, it’s important to make sure you’re making your device discoverable to other Bluetooth devices. If it’s hidden, other devices won’t be able to find it, and sometimes it can bug and prevent connections.

Here’s how to turn on your Bluetooth discoverable feature;

  1. From the home screen of your Android, navigate to the Menu> Settings > Bluetooth
  2. Toggle the Bluetooth switch, so it’s on
  3. Under the available settings, tick the box that allows your Bluetooth device to be discoverable
  4. Turn your Bluetooth feature on and connect to the Realme C67 5G device you’re trying to connect too

2.7 Exclude Bluetooth issues of the other device

android bluetooth problems - exclude Bluetooth issues of others

Sometimes, you might not even have a problem with your Realme C67 5G, but rather the Bluetooth device you’re trying to connect to, whether that’s a Bluetooth speaker, an in-car entertainment system, or any other kind of Bluetooth device.

By testing out another Bluetooth device to see if it will work with your preferred device, you can rule this out from being the issue.

  1. Disconnect your Realme C67 5G from the Bluetooth device and turn your Bluetooth off
  2. Now take another Bluetooth device and connect this to the Realme C67 5G device you’re trying to connect too. This could be another Android device, or even a computer or iOS device
  3. If the new device doesn’t connect to your Bluetooth device, you’ll know there’s a problem with your Bluetooth device, not your Realme C67 5G
  4. If the Realme C67 5G devices connect, you’ll know there’s a problem with your Realme C67 5G

2.8 Place both devices within close proximity

android bluetooth problems - close proximity

One of the common misconceptions of Bluetooth is just how far the wireless range is of the service. You need to make sure your devices are well and truly close to each other to make sure a stable connection can be formed.

The further away the Realme C67 5G devices are from each other, the less likely the connection will remain secure. As a rule of thumb, Bluetooth can work up to 100 meters, but to play it safe, always try and keep your devices under 50m apart.

2.9 Avoid interference of other Bluetooth sources

android bluetooth problems - avoid interference

The final consideration you’ll want to think about is that Bluetooth radio waves, or wireless waves, can interfere with each other. This means they can bounce off each other or get muddled up and make things confusing from your devices.

With this in mind, you’ll want to make sure you’re limiting the amount of Bluetooth activity in the area where you’re trying to use a device. While uncommon, this could be the problem.

To fix this issue, turn off all the Bluetooth connections in the area. This includes computers, laptops, mobile phones, tablets, and any other Bluetooth devices you may have. Then, try connecting your Realme C67 5G to the Realme C67 5G device you were trying to use. If it works, you know you were experiencing Bluetooth interference.


  • Title: How to Fix the Soft Bricked Realme C67 5G? | Dr.fone
  • Author: Abel
  • Created at : 2024-07-14 05:49:18
  • Updated at : 2024-07-15 05:49:18
  • Link: https://fix-guide.techidaily.com/how-to-fix-the-soft-bricked-realme-c67-5g-drfone-by-drfone-fix-android-problems-fix-android-problems/
  • License: This work is licensed under CC BY-NC-SA 4.0.