How to Fix the Soft Bricked Xiaomi Redmi K70 Pro?

Bricked phone is a serious problem, as your brick smartphone could be suffering from a soft brick or hard brick problem, and must be dealt with carefully. It is very common to see a brick smartphone these days. If you are wondering what exactly is a bricked phone, here is your answer.

A bricked phone, hard brick or soft brick, is a smartphone which refuses to start or boot all the way up the home/main screen of the Xiaomi Redmi K70 Pro device. This issue is observed within most Android phones because users have a tendency to tamper with the Xiaomi Redmi K70 Pro device settings, flashing new and customized ROMs and tweaking with the essential files. Playing around with the phone’s internal set-up leads to such errors, worst of them being a brick smartphone. Usually, a bricked phone does not switch on and stays frozen at the Xiaomi Redmi K70 Pro device logo, a blank screen or even worse, doesn’t respond to any command, even the power on command.

If you are confused about the soft brick and hard brick problems and looking for solutions to fix your priced phone, then here is all you need to know.

Read on to find out more.

Part 1: What is the difference between soft brick and hard brick?

To begin with, let us understand the basic difference between a soft brick and hard brick issue. Both versions of a bricked phone prevent it from booting but differ in their causes and gravity of the problem.

A soft-brick problem is caused merely by a software error/crash and makes your device switch on automatically every time you manually turn it off. This phenomenon is referred to as Boot Loop. Soft bricked Android phones are not as difficult to fix as the hard bricked Android phones. It is convenient to say that a soft bricked phone only boots up half-way and not fully, whereas a hard bricked device does not switch on at all. A hard brick error is thus caused when the kernel, which is nothing but an interface for the software to communicate with the hardware, is tampered with. A hard bricked phone is not recognized by your PC when plugged in and is a serious problem. It requires troubleshooting techniques and cannot be easily fixed as the soft brick problem.

Hard bricked phones are a rare sight, but the soft brick is very common. Given below are ways to fix a soft brick Android phone. The techniques listed here are the best and the most efficient ways to get your phone back to its normal working conditions without losing your important data or damaging your device or its software.

Part 2: Stuck at the Boot Loop

This is the first sign of a soft bricked Android phone. Boot Loop is nothing but when your phone does not remain switched off and turns itself on automatically, and freezes at the logo screen or blank screen, every time you manually try to power it off.

Stuck at boot loop problem can be fixed by clearing your Cache partitions. These partitions are nothing but storage locations for your modem, kernels, system files, drivers and built-in Apps data.

It is advisable to clear Cache partitions regularly to keep your phone free from such glitches.

Since the phone refuses to boot, Cache can be cleared from entering into the Recovery Mode. Different Android devices have different ways to put it in recovery mode. Normally pressing the power key and volume down key helps, but you may refer to your phone’s guide for better understanding and then follow the steps given below to clear the cache partition:

Once you are the recovery mode screen, you will see a number of options as shown in the screenshot.

Use the volume down key to scroll down and select ”Wipe cache partition” as shown below.

>

After the process is completed, select “Reboot System” which is the first option in the recovery mode screen.

This method will help you erase all the clogged up and unwanted files. You may loose some App related data, but that is a small price to pay to fix your bricked phone.

If this method does not boot up your brick smartphone and the problem still persists, there are two more things you can try. Read ahead to find out about them.

Part 3: Booting straight into recovery mode

If your bricked phone does not boot up to your Home Screen or Lock screen and instead boots directly into Recovery Mode, there is not much left to do. Booting straight into recovery mode is undoubtedly a soft brick error but it also indicates a possible problem with your current ROM. The only option you have to flash a new ROM to reboot your bricked phone back to its normal functioning.

To flash a new ROM:

Firstly, you must root your phone and unlock the Bootloader. Every phone’s mechanism to unlock the bootloader is different, thus, we suggest to refer to your user manual.

Once the Bootloader is unlocked, take a backup of all your data by selecting “Backup” or “Android” back in recovery mode. The process should not take long and all you need to do is tap “OK” to config backup.

In this step, download a ROM of your choice and store it in your SD Card. Insert the SD Card in your phone to begin the flashing process.

Once at the recovery mode, select “Install Zip from SD Card” from the options.

Scroll down using the volume key and use the power key to select the downloaded ROM.

This might take a few minutes of your time, but once the process is complete, reboot your phone.

Hopefully, your bricked phone will not boot normally and work smoothly.

Part 4: Booting straight into Bootloader

If your bricked phone boots straight into Bootloader, then this a serious issue and must not be taken lightly. Flashing a new ROM or clearing cache partitions are of little help in such a brick smartphone situation. Booting straight into Bootloader is a peculiar soft bricked Android phone feature and can be tackled only by downloading and flashing your original ROM from the manufacturer. In order to do so, a detailed study about your manufacturer’s ROM, ways to download and flash must be carried out. Since different Android phones come with different types of ROMs, it difficult to cover all the aspects about the different types of ROMs.

Brick smartphone problem has become more prominent than phone freezing or hanging issue. Android users are often seen looking for solutions to fix their soft brick and hard brick phones. Android phones are prone to get bricked and thus, it is important for us to know about the three techniques given above. These methods have been tried, tested and recommended by ay affected bricked phone users. Therefore, these tips are reliable and worth a try. So if your phone acts stubborn and refuses to boot normally, examine the problem carefully and adopt one of the solutions given above which best suits your situation.

Android Safe Mode - How to Turn off Safe Mode on Xiaomi Redmi K70 Pro?

Safe mode on Android is very useful to get rid of dangerous apps and malware. This allows the user to perform a uninstall of the crashed or malicious apps by putting safe mode on Android. Now the question is how to remove safe mode? In this article, we have discussed in detail how to get out of safe mode and also discussed some frequently asked questions. Keep reading this article.

Part 1: How to turn off safe mode on Android?

This is very important to turn off the safe mode after you put the safe mode on Android. Your mobile performance is limited in this mode. So you have to turn off safe mode. For doing this, there are some methods. Try to apply them one by one. If you succeed, stop there. Else go to the next method.

Method 1: Restarting the Xiaomi Redmi K70 Pro device

This is the easiest method to turn off the safe mode in Android. To use this method, follow the steps below.

Step 1 – Tap and hold the power button of your Xiaomi Redmi K70 Pro.

Step 2 – You could find the option “Restart”. Tap on it. (If you have only one option, move to the step no 2)

Step 3 – Now, your phone will boot up in some time and you can see the Xiaomi Redmi K70 Pro device is no more on safe mode.

This method, if goes well, will turn off safe mode in Android from your device. IF not, move to the next method instead.

Method 2: Do a soft reset:

The soft reset is very easy to perform. It won’t delete any of your personal files etc. Besides, it clears all the temp files and unnecessary data and recent apps so that you get a healthy device. This method is very good for turning off Safe mode on Android.

Step 1 – Tap and hold the power button.

Step 2 – Now, select “Power off” from the given option. This will make your device off.

Step 3 – Wait a few seconds and then turn it on again.

This time you can see your phone is no more in safe mode. Also, your junk files have been also removed. If you still find the Xiaomi Redmi K70 Pro device is the safe mode, follow the next method.

Method 3: Break all power

This method is sometimes very helpful to turn off safe mode on android by disconnecting all the power as well as resetting the SIM card.

Step 1 – Take the back cover off from the Xiaomi Redmi K70 Pro device and remove the battery. (Not all devices will give you this facility)

Step 2 – Take out the SIM card.

Step 3 – Reinsert the SIM card and insert the battery again.

Step 4 – Turn the Xiaomi Redmi K70 Pro device on by tapping and holding the power button.

Now, you can see your device is out of safe mode. If you still find your device in Safe mode, see the next method.

Method 4: Wipe the cache of the Xiaomi Redmi K70 Pro device.

The cache of the Xiaomi Redmi K70 Pro device sometimes creates an obstacle in overcoming the safe mode on Android. To solve this issue, follow the steps below.

Step 1 – Turn on your device in safe mode. It can generally be done by tapping the home, power, and volume up button on Android device. If this combination is not working for you, search the internet with your device model number.

Step 2 – Now you can find the recovery mode screen. Navigate to the “Wipe cache” option with the volume up and down button and select the option by tapping the power button.

Step 3 – Now follow on-screen instruction and your device will be rebooted.

After successful completion of this method, your device should no longer be in safe mode. If the problem still persists, the only solution is to do a factory reset. This will erase all the data from your device. So take backup of your internal storage.

Method 5: Factory data reset

To factory data reset, you have to follow the below steps.

Step 1 – Enter in the recovery mode by following the steps mentioned earlier.

Step 2 – Now select “Factory data reset” from the given options.

Step 3 – Now, follow the on-screen instructions and your device will be factory reset.

After this method, you can successfully get rid of the safe mode on Android. Restore your data from the backup you created.

Watch the video below to turn off safe mode on your phone:

Part 2: How to put the phone in safe mode?

If some apps or programs create a problem on your device, the solution is safe mode. Safe mode allows you to uninstall the app or the program out of your device safely. So, safe mode on Android is quite useful sometimes. Let’s have a look at how to turn on safe mode in Android.

Before this, remember to take a backup of your Xiaomi Redmi K70 Pro. We recommend you to use the Dr.Fone - Phone Backup (Android). This tool is the best in its class to provide users with a very easy-to-use user interface yet powerful solution.

Dr.Fone - Phone Backup (Android)_

Flexibly Backup and Restore Android Data

• Selectively backup Android data to the computer with one click.
• Preview and restore the backup to any Android devices.
• Supports 8000+ Android devices.
• There is no data lost during backup, export, or restore.

Always remember to use this tool before you enter in the safe mode as you never know what will happen next and you might end up with factory resetting. This, as the result, will erase all your valuable data. So always perform backup data before you proceed.

To enter the safe mode, follow the instructions below.

Step  1 – First of all, long press the power button and let the Power options appear.

Step 2 – Now, long press on the “Power off” option. This will instantly ask you if you want to reboot into safe mode. Select the option and your device will reboot in safe mode.

If you are using Android version 4.2 or earlier, turn off the Xiaomi Redmi K70 Pro device and turn it on the back by tapping the power button. When the logo appears, tap and hold the volume down button. This will allow the Xiaomi Redmi K70 Pro device to boot in safe mode.

Follow these steps carefully and now you can see a “Safe Mode” written at the corner of your device. This will confirm that you have successfully entered in Safe mode on Android.

Part 3: Safe mode on Android FAQs

In this section, we’ll discuss some frequently asked questions about the safe mode. Some users have many questions regarding the safe mode. Here we’ll try to cover some of them.

1. Why is My Xiaomi Redmi K70 Pro on safe mode?

This is a very common question around the world. For many Android device users, it’s quite common to see your phone in safe mode suddenly. Android is a secure platform and if your device sees any threat from your recently installed apps or any programs that want to harm your device; it would go into safe mode automatically. Sometimes, you might accidentally perform the steps discussed in part 2 and boot your device in safe mode.

2. Safe mode won’t turn off on My Xiaomi Redmi K70 Pro

For the solution to remove safe mode from your device you must follow the step-by-step methods as mentioned in part 1. This will surely take your device out of the safe mode.

The safe mode is a very useful program for any Android device. But it limits the programs of Android and you must remove safe mode after uninstalling the harmful app. This article showed you how to turn off safe mode easily.

Try It Free Try It Free

Fix Xiaomi Redmi K70 Pro Android System Webview Crash 2024 Issue

In recent months, the term “Android WebView crash 2023“ has become a common search term among Android users seeking solutions to these app crashes . The issue has been particularly prevalent on Xiaomi Redmi K70 Pro devices, but it has also affected users of other Android models.

Android WebView for Android apps allows you to see and interact with web pages without leaving your app. But lately, it’s been causing more headaches than it’s worth.

So, what’s going on with Xiaomi Redmi K70 Pro Android System WebView, and what can you do to fix its issues? Let’s take a look. This article will shed light on Xiaomi Redmi K70 Pro Android System WebView crashing apps, helping you understand what triggers them, how to identify them, and what you can do to prevent them from happening again.

Part 1: What Should We Know About Xiaomi Redmi K70 Pro Android System WebView Crashes?

This year, the term “Android WebView crash 2023“ has become a familiar and dreaded phrase. This issue has plagued Android users, causing app crashes, freezing , and frustration. But what exactly is Android WebView, and what triggers these apps to crash?

Android WebView is an integral component of Android apps, acting as the invisible engine that renders web content within these apps. It allows users to seamlessly browse websites, watch videos, and interact with web pages without switching to a separate browser. However, when WebView crashes, it disrupts this integrated experience, causing apps to malfunction.

Several signs can indicate an impending or ongoing Android WebView crash. These include:

• App Freezing

One of the earliest signs of an Xiaomi Redmi K70 Pro Android System WebView crash is the app freezing. The app may become unresponsive, refusing to respond to your taps or gestures.

• Unexpected App Closures

Another common sign is unexpected app closing. The app may shut down without warning, abruptly ending your activity. Xiaomi Redmi K70 Pro Android System WebView crashing apps can be disruptive if you are in the middle of a conversation, shopping online, or filling out an important form.

• Error Messages

Error messages can also provide valuable clues about the impending crash. These messages may appear as pop-ups or be displayed within the app itself.

• Slow Loading Times

Slow loading times can also be a sign of an impending crash. If webpages within the app take unusually long to load or images and other content appear pixelated or distorted, it could be a sign that Xiaomi Redmi K70 Pro Android System WebView is struggling to handle the workload.

But why does WebView crash Android smartphones? The answer involves several factors:

• Updates and Compatibility Issues

Updates are often intended to improve software stability and compatibility, but in some cases, they can introduce new bugs or compatibility issues that lead to crashes. It is particularly evident when app developers and WebView developers release updates that don’t fully align, causing conflicts.

• Insufficient Memory

Xiaomi Redmi K70 Pro Android System WebView requires a certain amount of memory to operate properly. If your device is running low on memory, it can cause Xiaomi Redmi K70 Pro Android System WebView to crash. It is more likely to happen on older devices with less RAM.

• Outdated Xiaomi Redmi K70 Pro Android System WebView

The WebView app is responsible for rendering web content within Android apps. Using an outdated version of WebView can introduce known bugs and security vulnerabilities that can cause crashes.

• Conflicts With Other Apps

WebView might crash if it conflicts with other resources or processes running on the Xiaomi Redmi K70 Pro device. It can happen if the Xiaomi Redmi K70 Pro device runs low on memory or other resource-intensive apps compete for system resources.

In the next section, you’ll explore potential solutions to keep your apps running smoothly.

Part 2: Android WebView Crashes? Here Are Quick and Proven Solutions

Now you’ve identified the signs and causes of Xiaomi Redmi K70 Pro Android System WebView crashing apps on your phone. While these issues can be frustrating, there are several quick and proven solutions to fix them.

Uninstall WebView Updates

If you’re experiencing apps crashing after a recent update, consider uninstalling those updates. This action can potentially revert to a more stable version of Xiaomi Redmi K70 Pro Android System WebView.

To do this on your Xiaomi Redmi K70 Pro, navigate to Settings > Apps, then select Xiaomi Redmi K70 Pro Android System WebView. Tap the menu icon in the top right corner and tap Uninstall updates.

Update Android WebView

Regularly updating Xiaomi Redmi K70 Pro Android System WebView to the latest version is crucial for maintaining compatibility and addressing known bugs. Google releases updates to address these concerns, ensuring optimal performance and stability.

Check for available updates on Xiaomi Redmi K70 Pro devices by navigating to Settings > Apps. Then, select Xiaomi Redmi K70 Pro Android System WebView and tap App details in-store. If an update is available, tap Update to install it and restart your phone.

Update Google Chrome

Android WebView is closely tied to Google Chrome, and issues with Chrome can sometimes affect WebView functionality. As such, updating Chrome to the latest version can help address Android System and WebView forcibly closing your phone’s apps.

Open the Google Play Store and search for Google Chrome. If an update is available, tap Update to install it, then restart your device.

Clearing Cache and Data for Android WebView

Clearing the cache frees up phone storage and helps the app run more efficiently. To clear Xiaomi Redmi K70 Pro Android System WebView’s cache and data, go to Settings > Apps and select Xiaomi Redmi K70 Pro Android System WebView. Tap on Storage and tap Clear cache on the lower right corner of your screen.

Restart Device

A simple restart can often resolve temporary glitches or conflicts that might be causing Android WebView crashes. The specific steps to restart your phone will vary depending on your device type.

Check Internet Connection

A stable internet connection is essential for Xiaomi Redmi K70 Pro Android System WebView to render web content properly. If the internet connection is unstable or down, it can lead to crashes. Ensure you have a stable internet connection before using WebView-based apps.

Update Device Software

OS updates may introduce changes to the Xiaomi Redmi K70 Pro Android System WebView that make it more compatible with newer web standards and technologies. It can enhance the performance and stability of apps that rely on WebView for web content.

Check for available software updates by going to Settings > Software Update. If an update is required, tap on Download and install.

While problems like when the Android System WebView crashes Android phones are common, they don’t have to be a persistent problem for Xiaomi Redmi K70 Pro users. It’s also equally important to have effective solutions when app crashes occur. This is where Wondershare Dr.Fone steps in as a reliable and comprehensive solution for restoring app stability and overall phone performance.

Part 3: Restoring Apps and Phone Stability: A Step-by-Step Guide

Dr. Fone’s System Repair tool can help you resolve common Android scenarios, including Google Play Store malfunctions and persistent app crashes.

How To Use Dr.Fone for Xiaomi Redmi K70 Pro Android System WebView Crashing Apps?

Before attempting any repairs, it is crucial to back up your Xiaomi Redmi K70 Pro to prevent data loss. Once you have a secure backup, follow these steps to fix WebView app crashes and restore your Xiaomi Redmi K70 Pro to its optimal performance.

• Step 1: Download the Dr.Fone toolkit. Next, install the software on your desktop and launch it.

safe & secure

3,090,920 people have downloaded it

• Step 2: Connect your Xiaomi Redmi K70 Pro to your computer using a USB cable. Dr.Fone will automatically detect and establish a connection.
• Step 3: Select the System Repair function from the Toolbox homepage and choose Android to confirm your device type.

• Step 4: Click Start to begin the process of fixing Xiaomi Redmi K70 Pro Android System WebView crashes. Next, choose your device details and follow the in-app instructions to put your device in Download mode.

• Step 5: Dr.Fone will analyze your device’s system and download the firmware to solve the root cause of the issue.

• Step 6: Confirm your device information in the dialogue box. Dr.Fone will proceed to repair the detected WebView-related problems.

• Step 7: Once the repair is complete, your device will restart, and Xiaomi Redmi K70 Pro Android System WebView crashing apps should no longer occur.

More Articles About Android System:

5 Ways to Do With & Access Android Phone with Broken Screen

Google Play Services Won’t Update? 12 Fixes are Here!

Easy Ways to Bypass Google Account Verification (FRP) On Android Phones

Conclusion

The “Android WebView crash 2023“ issue was widespread for many Android users. The common issues encountered were app crashes, slow loading times, and error messages. Fortunately, these problems are manageable with the right approach.

By understanding the signs and causes of Xiaomi Redmi K70 Pro Android System WebView crashes, you can take proactive measures to prevent them. Quick fixes such as clearing cache and data or updates can often resolve the issue promptly.

For more comprehensive troubleshooting, Dr. Fone’s mobile solution offers a reliable and user-friendly approach. Its advanced capabilities effectively tackle app crashing issues, providing you peace of mind that your phone is functioning optimally.

safe & secure

4,684,259 people have downloaded it

Also read: