How to Fix the Soft Bricked Xiaomi Redmi Note 13 Pro+ 5G?

Bricked phone is a serious problem, as your brick smartphone could be suffering from a soft brick or hard brick problem, and must be dealt with carefully. It is very common to see a brick smartphone these days. If you are wondering what exactly is a bricked phone, here is your answer.

A bricked phone, hard brick or soft brick, is a smartphone which refuses to start or boot all the way up the home/main screen of the Xiaomi Redmi Note 13 Pro+ 5G device. This issue is observed within most Android phones because users have a tendency to tamper with the Xiaomi Redmi Note 13 Pro+ 5G device settings, flashing new and customized ROMs and tweaking with the essential files. Playing around with the phone’s internal set-up leads to such errors, worst of them being a brick smartphone. Usually, a bricked phone does not switch on and stays frozen at the Xiaomi Redmi Note 13 Pro+ 5G device logo, a blank screen or even worse, doesn’t respond to any command, even the power on command.

If you are confused about the soft brick and hard brick problems and looking for solutions to fix your priced phone, then here is all you need to know.

Read on to find out more.

Part 1: What is the difference between soft brick and hard brick?

To begin with, let us understand the basic difference between a soft brick and hard brick issue. Both versions of a bricked phone prevent it from booting but differ in their causes and gravity of the problem.

A soft-brick problem is caused merely by a software error/crash and makes your device switch on automatically every time you manually turn it off. This phenomenon is referred to as Boot Loop. Soft bricked Android phones are not as difficult to fix as the hard bricked Android phones. It is convenient to say that a soft bricked phone only boots up half-way and not fully, whereas a hard bricked device does not switch on at all. A hard brick error is thus caused when the kernel, which is nothing but an interface for the software to communicate with the hardware, is tampered with. A hard bricked phone is not recognized by your PC when plugged in and is a serious problem. It requires troubleshooting techniques and cannot be easily fixed as the soft brick problem.

Hard bricked phones are a rare sight, but the soft brick is very common. Given below are ways to fix a soft brick Android phone. The techniques listed here are the best and the most efficient ways to get your phone back to its normal working conditions without losing your important data or damaging your device or its software.

Part 2: Stuck at the Boot Loop

This is the first sign of a soft bricked Android phone. Boot Loop is nothing but when your phone does not remain switched off and turns itself on automatically, and freezes at the logo screen or blank screen, every time you manually try to power it off.

Stuck at boot loop problem can be fixed by clearing your Cache partitions. These partitions are nothing but storage locations for your modem, kernels, system files, drivers and built-in Apps data.

It is advisable to clear Cache partitions regularly to keep your phone free from such glitches.

Since the phone refuses to boot, Cache can be cleared from entering into the Recovery Mode. Different Android devices have different ways to put it in recovery mode. Normally pressing the power key and volume down key helps, but you may refer to your phone’s guide for better understanding and then follow the steps given below to clear the cache partition:

Once you are the recovery mode screen, you will see a number of options as shown in the screenshot.

Use the volume down key to scroll down and select ”Wipe cache partition” as shown below.

>

After the process is completed, select “Reboot System” which is the first option in the recovery mode screen.

This method will help you erase all the clogged up and unwanted files. You may loose some App related data, but that is a small price to pay to fix your bricked phone.

If this method does not boot up your brick smartphone and the problem still persists, there are two more things you can try. Read ahead to find out about them.

Part 3: Booting straight into recovery mode

If your bricked phone does not boot up to your Home Screen or Lock screen and instead boots directly into Recovery Mode, there is not much left to do. Booting straight into recovery mode is undoubtedly a soft brick error but it also indicates a possible problem with your current ROM. The only option you have to flash a new ROM to reboot your bricked phone back to its normal functioning.

To flash a new ROM:

Firstly, you must root your phone and unlock the Bootloader. Every phone’s mechanism to unlock the bootloader is different, thus, we suggest to refer to your user manual.

Once the Bootloader is unlocked, take a backup of all your data by selecting “Backup” or “Android” back in recovery mode. The process should not take long and all you need to do is tap “OK” to config backup.

In this step, download a ROM of your choice and store it in your SD Card. Insert the SD Card in your phone to begin the flashing process.

Once at the recovery mode, select “Install Zip from SD Card” from the options.

Scroll down using the volume key and use the power key to select the downloaded ROM.

This might take a few minutes of your time, but once the process is complete, reboot your phone.

Hopefully, your bricked phone will not boot normally and work smoothly.

Part 4: Booting straight into Bootloader

If your bricked phone boots straight into Bootloader, then this a serious issue and must not be taken lightly. Flashing a new ROM or clearing cache partitions are of little help in such a brick smartphone situation. Booting straight into Bootloader is a peculiar soft bricked Android phone feature and can be tackled only by downloading and flashing your original ROM from the manufacturer. In order to do so, a detailed study about your manufacturer’s ROM, ways to download and flash must be carried out. Since different Android phones come with different types of ROMs, it difficult to cover all the aspects about the different types of ROMs.

Brick smartphone problem has become more prominent than phone freezing or hanging issue. Android users are often seen looking for solutions to fix their soft brick and hard brick phones. Android phones are prone to get bricked and thus, it is important for us to know about the three techniques given above. These methods have been tried, tested and recommended by ay affected bricked phone users. Therefore, these tips are reliable and worth a try. So if your phone acts stubborn and refuses to boot normally, examine the problem carefully and adopt one of the solutions given above which best suits your situation.

9 Solutions to Fix Xiaomi Redmi Note 13 Pro+ 5G System Crash Issue

Android crash, better known as Android system crash is not a recent issue and has troubled many users in the past as well. It means when your device crashes suddenly and refuses to turn on again or when your device freezes and becomes unresponsive. It may also happen that your Xiaomi Redmi Note 13 Pro+ 5G crashes abruptly but boots up normally only to crash again after a few minutes or hours. Android Crash sounds like a very serious problem and something that could damage your device or permanently destroy the software, but Android system crash can be dealt with easily. Just in case you suffer from an Android crash and want to know how to fix the Android system crash issue, rest assured that this problem is fixable. There are various ways to tackle the situation, to be discussed further, and you may choose the one that best suits you.

In this article, we will also talk about a unique technique to retrieve the data from your device on which Android system crash issue occurs. So let’s go ahead and read on to know more to fix the Android crash error.

Part 1: How to rescue data the Android system crashes?

When you encounter an Android system crash, before looking for solutions to fix it, make sure you retrieve all your data and information stored on your device. This might sound tedious but a very important step indeed.

Dr.Fone - Data Recovery (Android) is currently one of the most popular tools to retrieve data from not only broken or damaged, locked devices, and unresponsive devices but also from devices that face an Android system crash. You may try the software for free for scanning the data to understand its work. Dr.Fone’s Data Extraction tool not only retrieves and back-up contacts and messages but also your photos, videos, audio files, WhatsApp, docs, call logs, and other file folders. It is also equipped to retrieve data from the Xiaomi Redmi Note 13 Pro+ 5G device’s internal memory as well as Google drive.

Dr.Fone - Data Recovery (Android)

World’s 1st data retrieval software for broken Android devices.

• Recover data from broken devices or devices that are damaged in any other way such as those stuck in a reboot loop.
• Highest retrieval rate in the industry.
• Recover photos, videos, contacts, messages, call logs, and more.
• Compatible with Xiaomi Redmi Note 13 Pro+ 5G devices.

3,623,313 people have downloaded it

You may follow the steps given below to rescue your data from crashed Android devices.

1. Download and install the software on your PC. Run the software and then select the Data Recovery feature. Using a USB, connect your Xiaomi Redmi Note 13 Pro+ 5G to the PC.

2. Select “Android” > “Recover from Broken Phone” in the lower right corner.

3. Choose the “Touch screen not responsive or cannot access the phone” to continue.

4. You will now see device options before you. Select yours and move on to feed in your device name and model details.

5. Now press the volume down, power, and home button on your device together to boot the phone in Download mode.

6. As long as your phone is in Download mode, the software will start to analyze phone data.

7. Finally, the process will take a few minutes to scan and display your phone data. Select “Recover to Computer” to retrieve all data on your PC as a backup.

Using Dr.Fone Damage Extraction software is intuitive and very safe. It prevents data loss and allows you to adopt various ways to recover your device from the Android system crash issue.

safe & secure

Part 2: Why does my Android phone system keep crashing?

Encountering a persistent issue like the Android phone system constantly crashing can be highly frustrating and disruptive. This part delves into the underlying causes of this problem. By understanding these reasons, you can take informed steps to troubleshoot and rectify the issue, ensuring a smoother and more enjoyable smartphone experience.

• Software Glitches and Bugs
• Incompatible or Poorly Optimized Apps
• Outdated Operating System
• Corrupted System Files
• Malware and Security Threats
• Hardware Overheating
• Physical or Hardware Issues

A crashing Android phone system can be attributed to a variety of factors, ranging from software glitches and compatibility issues to hardware-related problems. Keep reading to get it solved!

Part 3: Restart your Xiaomi Redmi Note 13 Pro+ 5G

Once you have successfully retrieved your data, consider solving the Android crash issue as soon as possible. Before you redirect to a proper solution for repairing your Xiaomi Redmi Note 13 Pro+ 5G system, you can try restarting your device as a quick remedy. Restart the Android device to clear temporary system data and potentially resolve any software glitches causing the crash, which can be done as follows:

Instructions: Hold your Xiaomi Redmi Note 13 Pro+ 5G’s “Power” button on the side of the phone. As the following window appears on the screen, select the “Reboot” option to restart the Android device successfully.

Part 4: Shut down unnecessary running apps

Another quick solution to avoid Android devices crashing is to shut down unnecessary apps running in the Xiaomi Redmi Note 13 Pro+ 5G device’s background. To cater to that, you need to try out the following steps as a remedy to shutting down unwanted applications:

Step 1: Open the “Settings” of your Xiaomi Redmi Note 13 Pro+ 5G and continue to the “Battery and device care” section from the available options. Continue to the “Memory” section on the next window to lead to the applications taking up space on your Xiaomi Redmi Note 13 Pro+ 5G.

Step 2: As you progress further, you need to select the “Clean now” button to shut down all unnecessary background applications running on the Android.

Part 5: Uninstall incompatible Apps to fix Android crash issue

If your Android system crash takes place frequently but the Xiaomi Redmi Note 13 Pro+ 5G device turns on normally after that, there is a chance that some Apps may be causing the problem. Unnecessary and large App files burden the Xiaomi Redmi Note 13 Pro+ 5G device system and force it to crash every now and then. Make sure you download, install and store only those Apps which are fully compatible with your Android system. DO NOT download Apps from other unknown sources and use only Google Play store for the purpose. All other incompatible Apps must be deleted to prevent them from tweaking your software.

To uninstall unwanted and incompatible Apps, please follow the steps below.

1. Visit “Settings” and search for “Application Manager” or “Apps”.

Select the App you wish to uninstall. From the options that appear before you, click on “Uninstall” to delete the App from your device.

You may also uninstall an App directly from the Home Screen (only possible in certain devices) or from the Google Play Store.

Part 6: Check Android storage and free up space

If you are constantly facing issues of your Xiaomi Redmi Note 13 Pro+ 5G crashing, there is a possibility that your device’s storage is full. The need to free up space arouses the need to know about the potential steps for checking storage and cleaning up space, which is discussed as follows:

Step 1: You need to navigate into “Settings” and look for the “Battery and device care” section. As you lead next, select the “Storage” option to check the Android storage and see how it is segregated.

Step 2: As you navigate to the next screen, you can free up space by removing the applications from your Android. For that, tap on “Apps” to open a section containing the list of applications installed on the Android.

Step 3: Go through the list of applications and select any app you want to remove. As you navigate next, select “Uninstall” to lead to removing the app from the Android device.

Part 7: Clear cache partition to fix Android crash issue

Clearing cache is a good idea because it cleans your device and reduces the burden on the Android software and gives it enough space to function normally and carry out its operations.

In case the Android system crash issue is temporary, follow the steps given below to clear your device’s cache:

1. On your Xiaomi Redmi Note 13 Pro+ 5G, visit “Settings” and find “Storage”

2. Now tap on “Cached Data”, and then click “OK” to clear all unwanted cache from your device as shown above.

However, if the Android crash problem is such that your phone has frozen, becomes unresponsive, and does not turn on, you must first boot into the Recovery Mode screen.

1. Press the volume down button and power button together until you see a screen with multiple options before you.

2. Once you are on the Recovery Mode screen, use the volume down key to scroll down and select ”Wipe cache partition” as shown below.

3. After the process is completed, select “Reboot System” which is the first option in the recovery mode screen.

This method will help you erase all the clogged-up and unwanted files and resolve the Android system crash issue. If clearing cache doesn’t help, try formatting your SD Card.

Part 8: Remove the SD card to fix the Android crash issue

Removing and formatting your SD Card to fix the Android System crash issue is helpful when a corrupted SD Card disturbs the Android software forcing it to shut down suddenly.

To format your SD Card, just follow the instructions below.

1. Firstly, eject it from the Xiaomi Redmi Note 13 Pro+ 5G device.

2. Then using an SD Card reading tool, insert the Card in your PC. Open Computer and then right-click on the SD card to format it.

Part 9: Update to the latest software version

Updating the Android device will cast out all glitches that prevent it from operating properly. For that, let’s look into the steps explaining how to update your Android software version to the latest option:

Step 1: As you lead into the “Settings” of your Android, scroll down and look for the “Software Update” option.

Step 2: On leading to the next screen, select the “Download and Install” option to continue updating your Android to the latest version.

Part 10: Use Wondershare Dr.Fone – System Repair To Fix Android System Crash

If you are not getting any specific solution to the problem, you can try fixing the Android system crash problems using specific tools. These third-party tools can be an excellent option for resolving system errors in Android devices. Wondershare Dr.Fone – System Repair (Android) is a great tool designed to resolve all system issues in Xiaomi Redmi Note 13 Pro+ 5G] and other smartphones.

It features a great system providing a one-click Android repair option for fixing all kinds of problems. Along with fixing all basic and advanced Android system issues, it features support for multiple Android devices.

Key Features of Wondershare Dr.Fone – System Repair (Android)

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

• Fix your Android to normal, no skills required.
• Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
• The high success rate in resolving Android system issues.
• Compatible with a wide range of Android devices and OS versions
• User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

As we redirect to resolving Android system errors using Wondershare Dr.Fone – System Repair, let’s look into some essential features that make up the entire tool:

• Features support for all the latest Android devices up to Xiaomi Redmi Note 13 Pro+ 5G S22.
• It can help you resolve issues like Android’s black screen of death, being stuck in the boot loop, and many more.
• Provides an easy interface to execute procedures, making it a simple tool with no learning curve.

Steps To Repair Android System Crash Issue Using Dr.Fone – System Repair (Android)

Let’s redirect to the steps that can be used to repair Android system crash issues using Wondershare Dr.Fone – System Repair (Android):

Step 1: Launch and Open System Repair Tool

You need to download and install the latest version of Wondershare Dr.Fone on your computer. Proceed to launch and navigate into the “Toolbox” section. Look for the “System Repair” option and initiate the process while ensuring the Android device is connected to the computer through a USB cable.

Step 2: Start Repairing the Android

After selecting the nature of the Xiaomi Redmi Note 13 Pro+ 5G device you want to repair, navigate to a new window where you need to click “Start” to initiate the system repair process.

Step 3: Define the Parameters of Device

You will be redirected to a new window where you need to define and verify some parameters before repairing the Android. Select the “Brand,” provide a “Name,” select a “Model,” and provide a country where it has been bought. Define the “Carrier” and click “Next” after confirming.

Step 4: Put Android in Download Mode

Whatsoever Android you own, you need to put it in Download Mode, depending on the buttons that the Xiaomi Redmi Note 13 Pro+ 5G device has. The repairing process initiates as you enter the Download Mode, and new firmware is downloaded on the platform.

Step 5: Fix the Firmware of Android

Once it downloads and is verified, click the “Fix Now” button to repair the Android successfully. You may need to provide a PIN to confirm the process. Once provided, the next screen shows the progress of the repair process. As it completes, click the “Done” button to conclude fixing the Android system crash issue.

safe & secure

Part 11: Factory reset the Xiaomi Redmi Note 13 Pro+ 5G device to fix the Android crash issue

Factory Resetting is advisable only when nothing else works. Also, there are two ways of doing it depending on whether the Android crash is permanent or temporary.

Follow the steps given below to factory reset your device while it is switched on:

1. Visit “Settings”.

Now select “Backup and Reset”.

In this step, select “Factory data reset” and then “Reset Device” to confirm Factory Reset.

The process of factory resetting your Xiaomi Redmi Note 13 Pro+ 5G is risky and cumbersome, as it deleted all data, but it helps to fix the Android System crash error.

You may also follow the instructions given below to Master set your device in Recovery Mode if it won’t turn on after an Android system crash has taken place:

When you are at the Recovery Mode screen, scroll down using volume down key, and from the options given, select “Factory Reset” using the power key.

Wait for your device to perform the task and then:

Reboot the phone in Recovery Mode by selecting the first option.

Bottomline, the tips given above have helped many to solve the Android system crash issue. So do not hesitate to try them, but don’t forget to extract your data with Dr.Fone’s Data Recovery tool.

safe & secure

Xiaomi Redmi Note 13 Pro+ 5G Not Receiving Texts? 10 Hassle-Free Solutions Here

If you are using an Xiaomi Redmi Note 13 Pro+ 5G, you might have encountered the issue of not receiving texts. This issue can be quite frustrating, as it prevents you from staying connected with your friends and family. However, there are several ways to fix this issue and get your texts back up and running. In this article, we will show you some of the best solutions to fix the issue of not receiving texts on Xiaomi Redmi Note 13 Pro+ 5G.

It is very common that the Android messaging app is not working on many devices especially broken devices . People often encounter this issue in Xiaomi Redmi Note 13 Pro+ 5G phones, even the latest ones.

You might find lots of people online stating I can’t receive text messages on Android. And usually, people don’t find a legit solution for this issue. If you are also experiencing this sort of issue on your Xiaomi Redmi Note 13 Pro+ 5Gs, then don’t panic. We have a series of methods that can supposedly fix the problem. But at first, we will learn what the main reasons this problem arises are and how do you know that it is consistent not some random error.

Take a look at the sections below, and you will learn all possible things regarding the messaging application on your phone.

Part 0. Symptoms and Causes of Android Not Receiving Texts

The most common symptoms that would clarify that your Android messaging service is not working right are given below:

• You will stop receiving any texts all of a sudden.
• You can’t send or receive a text message.
• Whenever you try to text someone, the message sent failed notification pop up on the screen.

The reasons why your Android is not receiving texts are given below:

• Network issue
• Insufficient memory
• Mis-configuration of device settings
• Switching of devices
• A glitch in the messaging app
• Software issue
• Carrier problem with the registered network.

Apart from all these reasons, some additional causes are also there that can lead to this issue.

Part 1: One-click to Fix Android not Receiving Texts by Android System Repair

If you are not willing to waste your precious time fixing the message problem, then you can switch to the top-rated Android repair tool, i.e., Dr.Fone - System Repair (Android) . With this software, you can easily fix issues like the black screen of death, crashing apps, can’t receive text messages on Android, or failed download. If you have no idea what is causing the message app problem, you can simply think of repairing the whole Android system.

You surely need to try the software as it can perform the following tasks:

Dr.Fone - System Repair (Android)

Android repair tool to fix Android Not Receiving Texts

• Fix the Android system without technical knowledge.
• Complete Android repair tool for all brands and models.
• Simple and Easy Repair procedure
• 100% guarantee that the problem will be fixed.
• Also available for iOS devices.

3981454 people have downloaded it

You can download and install the software on your system and use it to fix any issue. Then follow the steps given below:

Step 1: Launch the application and choose the System Repair option from the main interface. Connect your Xiaomi Redmi Note 13 Pro+ 5G to the computer and choose the Android Repair mode, and hit the Start button to begin.

Step 2: You will have to provide information about your device, including the brand, name, model, country, and carrier. In between, you will be notified that your device repair might erase the existing data of your device.

Step 3: Agree with the conditions and hit the Next button. The software will download the firmware package automatically. It might take a while to finish the download, and when it is finished, the repair process will be initiated automatically.

It won’t take long, and your Xiaomi Redmi Note 13 Pro+ 5G will be repaired. Now you will be able to receive and send text messages without any hassle.

Part 2: Remove and Insert the SIM

The easiest thing that you can try if your Xiaomi Redmi Note 13 Pro+ 5G is not receiving any text messages is because the SIM is not inserted right. If your SIM card is inserted wrong, then it is obvious you can’t receive text messages on Android. Simply take out the SIM card, see how it must be inserted, and do it correctly. Once the SIM is inserted in the right way, you will receive the pending text messages immediately unless there is another issue preventing it.

Part 3: Check Network Connection

Another simple method that you can try if you are not receiving text messages on Xiaomi Redmi Note 13 Pro+ 5G phone is to check your network connection. Usually, you can see the bar on the top of the screen. Maybe the problem exists because you have no signal strength at the moment.

Part 4: Consult your Carrier about the Data Plan

Maybe you are unable to get messages on your Xiaomi Redmi Note 13 Pro+ 5Gs because your existing data plan has expired. You can directly contact your Carrier about the issues where your Xiaomi Redmi Note 13 Pro+ 5G is not receiving texts. If your plan has expired, then you might have to renew it immediately. If not, then try out other fixes to resolve this issue.

Part 5: Try the SIM card in Another Phone or Slot

Sometimes, people complain that Xiaomi Redmi Note 13 Pro+ 5G is not receiving texts from iPhone, and it might be because of the SIM card issue. So, the best thing you can try is to remove the SIM from your current phone and insert it into another phone.

When you are offline the message is saved on the server and just about when you get online, the text messages are delivered. If it is the SIM issue, then you will not get the message unless you contact your network operator.

Part 6: Clear the Cache of Messaging App

In smartphones, the memory space often gets filled up with cache. And not everyone remembers that they have to clear the cache from time to time. The accumulated cache can also lead to this issue. So, if your Android messaging app is not working, you have to clear the cache memory.

Step 1: Open the Settings and go to Apps. Find the Messages app from the list and tap to open it. There you will see the storage occupied by the app along with the cache.

Step 2: Click on the Clear Cache button and wait as the Xiaomi Redmi Note 13 Pro+ 5G device free up the memory of your device.

Once the cache is cleared, you can also clear the data if you want to and you’ll instantly receive the text messages on your phone.

Part 7: Delete Useless Messages to Free Up Space

Sometimes, if you are not receiving text messages on Xiaomi Redmi Note 13 Pro+ 5G, it means that you need to clean up the clutter of useless messages from your phone and SIM both. The phone messages can be deleted directly from your phone. But the SIM card messages needed to be deleted separately. The SIM cards don’t have enough memory to hold plenty of messages. Therefore, once the storage is full, you will stop receiving messages entirely.

Step 1: Open the messages app and open settings. Look for an option that says “Manage SIM Card Messages”. Sometimes, you can find this option under Advanced Settings.

Step 2: There, you will see the existing messages on the SIM. You can either delete all the messages or perform a selective deletion to free up space.

Part 8: Try a Third-party Messaging App

If you can’t receive messages on your default app, then you can try installing a third-party messaging app. Nowadays, most people use social media messaging apps like WhatsApp, Skype, etc. for messaging. So, if somehow, the Android is not receiving texts, then the new apps can help you to send and receive messages with a non-native network.

_Further Reading: 15 Best Free Chat Apps in 2022. Chat Now! _

Part 9: Ensure your Phone is Fully Charged

Another possible fix to this problem might be your phone’s battery percentage. Sometimes, when the Android is in power saving mode, it disables the default apps too. As a result, you can’t even receive text messages on Android. So, when you plug in the charger, the power saving mode will be disabled, and you will get your text messages.

Part 10: Ensure It’s Not An iMessage From iPhone

If the Xiaomi Redmi Note 13 Pro+ 5G phone is not receiving texts from iPhone, then this might be a different issue. Usually, there is an option on the iPhone where they can send texts as iMessage and simple messages. If the iPhone user sends the text as iMessage, then it will not show up on the Android device. To resolve this, you have to follow the steps below:

Taking the iPhone in hand makes sure that you are connected to a network. Open settings and scroll to look for the Message option. Toggle the bar next to the iMessage option to turn it off.

If the FaceTime option is also on, you might have to deactivate that too to send messages and calls as regular ones.

Part 11: Update Your Android

Updating the operating system to the latest Android version can fix some system errors which may cause the “Android not receiving texts” issue because the latest version always brings a better user experience and fix the know bugs.

Conclusion

Now you know several methods that can work if the Android messaging app is not working.  If you experience this kind of issue with your Xiaomi Redmi Note 13 Pro+ 5G, then you are most likely to resolve them with these fixes. If none of the solutions seem to fix the issue, then you can take the help of Dr. Fone - System Repair (Android) feature. With this tool, you can resolve all kinds of working issues on your device.