How To Fix Unresponsive Touch Screen on Tecno Spark 20C

With the increase in our reliance on smartphones, having touchscreen problems on your device can be annoying. Sometimes, it’s even more frustrating than a physically broken screen because you don’t know where the issue is coming from.

If your touchscreen is malfunctioning or doesn’t work correctly, you cannot interact with your device. On this page, you’ll learn general phone touch problems on Android and how to get rid of them. Now explore the article to learn more.

Part 1: Why Is My Android Experiencing Touch Screen Problems

Below are some of the most common reasons you’re experiencing touch problems on your Android smartphone.

The touchscreen problemfreezes your phone, lags, or hangs.
Some parts of the screen work fine, but some don’t.
Your screen responds inaccurately (typing “a” gets you “q” or “z”).
The touchscreen is automatically operating itself, resulting in ghost touch.
It doesn’t respond to any taps, and the phone’s screen has stopped working.
The device is physically damaged, or the screen is cracked or broken.
Outdated devices are prone to the black/white/blue screen of death.

Part 2: Tips, Fixes, and Workarounds To Fix Your Tecno Spark 20C Touch Problems

If any of the outlined reasons above are the cause of your touch screen malfunctioning, here are some solutions to fix it.

Method 1: Remove the Screen Protector and Phone Case

Some phone cases and screen protectors cause touch problems on your Android screen. This issue is prevalent if you recently changed your phone case or screen protector. It may be due to incompatibility, but you should remove them to see if your phone starts responding again.

Method 2: Clean Your Android Smartphone

A touchscreen malfunctioning can also be a sign of a dirty display. Since the screen relies on contact between your fingers and the touchpad to perform actions, this also applies to foreign particles such as dirt, debris, smudges, oil, and more. Clean your touchscreen with wipes or a soft cloth by gently wiping over the screen.

Method 3: Stop Using Your Android Device for a While

Touch problems also arise due to abnormal temperature changes. Your phone might experience ghost touch if it’s too cold or hot. For your screen to function correctly, it needs to be in a temperate environment. Remember to take breaks between phone usage, especially when the phone gets too hot. Avoid using your device under hot conditions, direct sunlight, or anything affecting your phone’s normal temperature.

Method 4: Restart Your Android

Performing a reboot sounds trivial with such a complicated issue. But sometimes, it’s often the most successful way to fix a touchscreen problem on an Android device. Restarting your Android shuts down and resets all background services, which may have led to your issue.

To restart your Android, press and hold the Power button for several seconds to switch off your phone. In other smartphones, you may need to hold down the Power button as well as the Volume Down button at the same time.

Method 5: Factory Data Reset Your Android

Before attempting to have your device checked for any hardware defects, you should try completing a Factory Reset. To do this, go to Settings > Backup and Reset. Next, tap on Factory data reset > Delete all.

Performing a Factory Data Reset will erase all your data and restore your device to its factory default settings. Creating a backup before doing this step is recommended, as you will lose all your personal data once the process starts.

Method 6: Put Your Android into Recovery Mode

If all else fails, placing your Android into Recovery Mode should be a last resort. Doing this method works similarly to the method above. You should perform this method if the screen is unresponsive and only the buttons on your Android are functional. Here’s how.

Note

Placing your Android into Recovery Mode is different depending on your Android smartphone. Refer to your owner’s manual to see which method is right for your Tecno Spark 20C.

Step 1A: Press and hold the Power button and Volume Down buttons at the same time. Continue holding both buttons until the screen starts.

Step 1B: If your Tecno Spark 20C still has a Home button, press and hold the Home button and the Power button at the same time. Continue holding them until the screen starts.

Step 1C: If step 1A did not put your Android into Recovery Mode, press and hold the Power and Volume Up and Down buttons simultaneously. Continue pressing all three until the screen starts.

Step 2: Use the Volume buttons to navigate the choices, select Wipe data/factory reset, and confirm your choice with the Power button.

Step 3: Wait for the process to complete and for your Tecno Spark 20C to restart automatically.

Method 7: Replace Your Android Touchscreen

If doing all the earlier workarounds and fixes couldn’t resolve the touchscreen problem, it could be the screen itself. While replacing the touchscreen yourself is possible if you have the technical know-how, it’s still best to bring it to a professional to prevent further damage. You should have your Tecno Spark 20C checked by a technician if the screen is getting weak, has water damage, or has failing screen components.

“

Method 8: Bring it to an Authorized Service Center

Your phone touch problem might not be caused by the screen, even when you had it replaced. If your Android is still unresponsive, it’s best to bring your smartphone to an authorized service center or directly to the phone manufacturer, especially when all efforts are exhausted.

Part 3: How To Fix Android Touch Problem With an Alternative

If all the general phone touch problems on your Tecno Spark 20C persist, you should strongly consider Wondershare Dr.Fone to do the job. The program can fix all Android system issues without any required skills. Problems caused by the operating system or software, such as the black screen of death, boot loop, ghost touch, and more, are done within less than 10 minutes with the program.

Key Features

Dr.Fone – System Repair (Android) has many features you can immediately take advantage of. Here are some of them below.

Fix All Android Problems In Minutes

Wondershare Dr.Fone allows you to fix all touchscreen problems on your smartphone within less than 10 minutes. Moreover, it has a high success rate making it one of the most reliable tools available today.

Supports up to 1000+ Android Models

The program supports almost all Tecno Spark 20C models and other Android devices, whether unlocked or from a carrier. Dr.Fone is equipped with all the proper firmware to flash your Tecno Spark 20C with just a few clicks. In addition, it has handy on-screen instructions to help you complete the whole process with ease.

Pros and Cons

Here are the pros and cons of using Dr.Fone – System Repair (Android) to know if you’re still undecided.

Pros

The user interface is clutter-free, making it highly beginner-friendly.
The fast processing time to fix your Tecno Spark 20C means you can do more in less time.

Cons

The free version only works until you see if your Tecno Spark 20C is compatible with the app. You will be required to enter a valid license once you initiate the repair process.
If you own an iOS device, you’ll have to get the iOS version.

How To Fix Black Phone Screen With Wondershare Dr.Fone

Follow the step-by-step guide below to start fixing general phone screen problems on Android using Wondershare Dr.Fone.

Step 1: Download and install Wondershare Dr.Fone on your computer. Next, launch the program and connect your Tecno Spark 20C to your computer.

Step 2: Click Start to initiate the setup on a new window. From there, select the Brand, Name, Model, Country, and Carrier of your Tecno Spark 20C and click Next.

Step 3: Follow the on-screen instructions on the main program window to initiate the repair process. After that, wait for your Android smartphone to return to its original state.

Part 4: FAQs

Here are some FAQs you should remember when experiencing phone touch problems.

1. Does a Cracked Screen Affect Touch on an Android?

If you continue using a smartphone with a cracked screen, there are several implications. Your device will be vulnerable to further damage and might develop touchscreen problems,and your sensors will gradually begin to malfunction. The capabilities of your device are also compromised the longer you delay repairing it. Moreover, a cracked screen can put your fingers at risk of injury due to potential glass splinters.

2. How Do I Temporarily Fix a Cracked Screen?

If you can’t take your cracked screen to a repair shop, apply a small amount of vegetable oil or petroleum jelly to the screen. Doing this will not fix the issue but will make the cracks less noticeable. On the other hand, you can also apply a screen protector to safeguard your phone against further damage. The screen protector slows down or prevents the cracks from getting worse.

3. Can I Use Dr.Fone for Free?

You can download and install Dr.Fone – System Repair (iOS) or (Android) for free to evaluate the program’s offerings. You can do the first few steps to see if the app supports your device. However, you need to get the full version and enter a valid license code to repair your smartphone.

safe & secure

4,471,551 people have downloaded it

Conclusion

If the touchscreen is malfunctioning on your smartphone, one of the fixes above should help solve the problem. If it did not solve the issue, consider using Dr. Fone – System Repair for iOS or Android when you need an all-in-one solution to all your phone screen problems.

However, if your screen is broken or cracked, going to an authorized service center is still your best bet, especially when your screen urgently needs a replacement. Delaying it further may hurt your wallet in the long run, so it’s best to fix it as soon as possible.

[Solved] Warning: Camera Failed on Tecno Spark 20C

In this article, you will learn why camera fails on Tecno Spark 20C devices, how to make camera work again, as well as a system repair tool to fix this issue in few clicks.

Tecno Spark 20C devices are one of the best Android devices available in the market and their users are always satisfied with their features. However, it is a recent observation that many Tecno Spark 20C users complain about Tecno Spark 20C camera failed error while using the camera App on the Tecno Spark 20C device. It is a strange error and pops up suddenly with only one option to tap on, i.e., “OK”

The error message reads as follows: “Warning: Camera Failed”.

Once you click on “OK” the app shuts down abruptly and your Tecno Spark 20C camera is failed. We understand this is not a very pleasing situation, thus, here are ways to tackle the camera failed Tecno Spark 20C issue. Let us now move ahead and find out why exactly you experience Warning: Camera Failed error and how to fix it.

Part 1: Why Tecno Spark 20C phone has Warning: Camera Failed error?

We are all aware that no device runs smoothly, without any glitches. We also know that there is a cause behind every problem. Listed below are a few reasons behind camera failed error, especially on Tecno Spark 20C devices:

If you have recently updated your OS version, there are chances that certain bugs are preventing the camera App from functioning normally. Also, if the update is interrupted and not downloaded completely, certain apps may suffer.
There are chances of your internal storage being cluttered with unwanted Apps and files leaving no space for the camera App to save its data and work smoothly.
If you haven’t cleared camera Cache and Data, the chances of the App to get clogged up increase tremendously which disrupt its working.
Warning: Camera Failed error can also be a direct outcome of a change in the system settings or the Tecno Spark 20C device’s internal settings.
Finally, if you tamper a lot with the camera settings and do not update the App whenever it is available, Tecno Spark 20C Camera App will not be efficient.

There might be much more reasons for the camera failed error, but these are the most obvious ones. Now let us now move on to troubleshooting the problem.

Part 2: How to fix Tecno Spark 20C Camera Failed in One Click?

If you are experiencing some kind of issues in your Tecno Spark 20Cs such as Tecno Spark 20C camera failed, the Tecno Spark 20C device stopped working, black screen, play store not working, etc. There is a special software is designed for such kind of issues in Android devices, i.e. dr. fone. The tool enables the users to fix various kinds of issues in the Tecno Spark 20C devices and perform a complete system repair so the Tecno Spark 20C device starts working normally.

Dr.Fone - System Repair (Android)

One-click solution to fix camera failed on Tecno Spark 20C devices

The tool has a one-click operation which makes it super easy to use.
You don’t need any technical skills expertise to operate the software.
The software supports all the Tecno Spark 20C devices including the latest and older ones.
The software can fix the “warning camera failed”, the app is crashing, failed update, etc.

4,616,396 people have downloaded it

Note: You have to remember that the system repair may erase all the Tecno Spark 20C device data. So, create a backup of your Tecno Spark 20C data first and then try fixing the Tecno Spark 20C phone.

Follow the steps given below and fix the camera failed error:

Step 1. Download the software on your computer and launch it. Connect your device and select the System Repair option from the main interface. In the next screen, select Android Repair module.

Step 2. You will have to provide the Tecno Spark 20C device details accurately to ensure that the software provides a precise firmware package to be downloaded. Enter brand, name, model, country, and carrier of your device and agree to the terms and condition.

Step 3. Now put your device in the download mode. The software will provide you with a guide to put the phone in download mode to begin the downloading process.

Step 4. As soon as the firmware is downloaded, the software will automatically initiate the repair process. You will be able to see the ongoing repair.

When the software is done repairing the system, you will be notified. Thus, the Camera failed Tecno Spark 20C error in your phone will be fixed.

Part 3: How to fix Camera Failed error by clearing camera data?

Has anyone ever informed you that it is absolutely necessary to keep clearing camera data every once in a while? Yes, since it deletes all unnecessary data stored in respect of the App and no, it does not mean that all your photos and videos will get deleted. Just follow the steps given below to clear camera data:

1. First, visit “Settings’” on your Tecno Spark 20C device and select “Apps” or Application Manager”.

2. Now a list of all Apps will appear before you. Keep scrolling down until your find “Camera”.

Tap on “Camera” to open the “Camera Info” screen and once you are there, hit “Clear Data” option as shown below.

That’s all, now return to the Home Screen and access the camera again. Hopefully, it will work now.

Part 4: How to fix Camera Failed error by removing third-party Apps?

Another tip to fix Tecno Spark 20C camera failed error is by deleting a few unwanted third-party Apps (recently installed) to free some space in the Tecno Spark 20C device’s internal storage. It is essential to create and keep storage space for the camera App to function smoothly and allow it to store its data as well. Also, if this issue only happens recently, it might be some newly installed Apps causing some glitches with the camera.

Simply, follow the instructions given below to remove Apps from Tecno Spark 20C Devices:

1. Click on the “Settings” icon on the Home Screen and from the options before you, select “Apps”/ “Application Manager”.

2. You will see that a list of downloaded and built-in Apps will open up before you as follows.

3. Now, once you select the App you want to uninstall, the App Info screen will appear. Tap on “Uninstall” option and then tap on “Uninstall” again on the pop-up message.

The App will be removed immediately and its icon will disappear from the Home Screen and you will notice an increase in the storage capacity of your device.

Part 5: How to fix Camera Failed error by wiping Cache Partition?

This method might seem tedious and time-consuming and you may also lose your data and essential settings. However, wiping the Cache Partition only cleans your device system internally and gets rid off any unwanted and trouble making elements causing Warning: Camera Failed error. Follow the step-by-step guide given below to clean Cache Partition smoothly:

1. Firstly, switch off the Tecno Spark 20C device by pressing the power button and tapping on “Power Off” as shown in the screenshot below. Then wait for the lit screen to turn off completely before proceeding further.

2. Now, press and hold the power on/off, home and volume up button simultaneously. Your device will now vibrate. This a signal to let go of the power button (only).

3. Once the Recovery Screen appears, leave all buttons and use the volume down key till you reach “Wipe Cache Partition”.

4. Now, to select the option to use the power on/off button and wait for the process to get over. Once this done, tap on “Reboot system now” and see that your device restarts normally.

You may try to use the camera app once the process completes.

Part 6: How to fix Camera Failed error by Reset Settings?

Resetting the camera settings solves the problem 9 out of 10 times and thus is worth a try.

1. To reset, first, launch the Camera App by tapping on its icon.

2. Then go to Camera “Settings” by tapping on the circular gear like icon.

3. Now look for “Reset Settings” options and click on it.

Once done, go back to the Home Screen and start the camera App again to use it.

Part 7: How to fix Camera Failed error by Factory Reset?

Lastly, if the above-mentioned techniques do not help you in fixing the camera failed error, you can consider performing a Factory Reset. Note: This method will delete all your saved data so it is advised to backup before you start the process.

Here are the steps to factory reset your device to fix “Warning: Camera Failed” Error:

1. Start by visiting “Settings” on your Tecno Spark 20C device on which the camera has failed.

2. Now from the list of options before you, select “Backup and reset” and move ahead.

3. Now you must first select “Factory data reset” and then tap on “Reset Device” as shown in the screenshot below.

4. Finally, you have to click on “Erase Everything” and wait for the Tecno Spark 20C device to reboot itself.

Note: You will have to set up your Tecno Spark 20C device from scratch once it is reset, however, that is a small price to pay to fix your Camera App.

Warning: Camera Failed error is not a rare phenomenon and many users experience it on daily basis. So, there is no need to panic, All you need to do is carefully follow the instructions given above and repair your Camera App yourself. You do not need to seek any technical assistance for the same as the camera failed issue is not difficult to deal with. So go ahead and try these tricks to enjoy using the Camera App on your Tecno Spark 20C devices.

Reliable User Guide to Fix Tecno Spark 20C Running Slow and Freezing

Android smartphones have opened a lot of doors for their users. They continue to evolve year after year with the hope of giving the world a wonderful digital experience. So far, we can all agree that they’re going the extra mile and doing a really great job. Android phones today are all packed with supreme capabilities that are beneficial to everyone.

However, Android phones are still not close to perfect. They also act up sometimes and cause a stir. Some users have observed that the Android phone is running slow and freezing over time. There can be many potential reasons why Android phone runs slow suddenly. But it doesn’t mean it cannot be restored at all to its original state and function.

In this article, we will review the details of this Android phone issue. We’ll provide solutions you can try if you ever get caught in the same problem. Continue reading to learn more.

Understanding the Specs That Make Android Phones Run Fast

The issue of Android phone running slow and freezing is not limited to old devices only. The same problem has also been observed in newly purchased units. The roots of this unfortunate occurrence vary from one user to another. It depends on different elements, from external factors like users’ handling of the Tecno Spark 20C device to internal factors such as its capabilities. To understand it more, below are some Android phone specifications related to the Tecno Spark 20C device’s overall performance and speed.

The CPU Core Count

Unlike before, Android phones today are equipped with several cores. Each of them has the ability to execute a process alone. Therefore, the Tecno Spark 20C device can handle two or more tasks at once without compromising the quality of its performance. If your Tecno Spark 20C contains more CPU core, its performance surely be more powerful and speedy.

The CPU Clock Speed

Simply put, clock speed is basically the speed at which the CPU cores can carry out a cycle in a second. A faster clock speed definitely translates into the Tecno Spark 20C device’s higher performance. For instance, an octa-core Android phone with a one GHz per second clock speed is a decent device. But it’s less powerful than a device with the same number of cores but runs at two GHz per second.

Random Access Memory

In a simple language, Random Access Memory (RAM) temporarily stores the data from apps that are currently running. Smartphones can be more flexible with multi-tasking if their RAM has enough space. So if you’re among these users who perform multiple tasks simultaneously, you better choose a device with more RAM.

Internal Storage

The mobile applications installed on your smartphones are directly related to internal storage. The apps save their data every time, so they behave strangely when the Tecno Spark 20C device runs out of storage. If you’re using heavy mobile applications, it’s best to opt for smartphones with huge internal storage.

Reasons Why My Tecno Spark 20C is Running Slow

It’s not really hard to tell why your Tecno Spark 20C is slow because it’s apparently a common issue among users. But don’t worry. Most of the time, the problem is not a major concern. Here are some scenarios that may slow down your Tecno Spark 20Cs.

Overloading Background Processes

It’s great to have an Android phone that can flawlessly multi-task. However, not all units can handle that well. As mentioned earlier, it depends on the CPU core count and the core’s clock speed. If your Tecno Spark 20C is running slow and freezing, many processes may be happening at the same time. Your device’s cores and clock speed are potentially incapable of executing such demands.

Your Phone is Running Out of Storage

Mobile apps need to save data on your phone. They perform the tasks based on the data stored on the Tecno Spark 20C device. So if your Tecno Spark 20C is slow, it’s possible that your device is already running out of storage. Each app has its own storage requirement. If your phone goes below that, the app will surely crash and not work.

Animation Speed is Way Too Slow

You can modify the Tecno Spark 20C device’s animation type and speed on your Tecno Spark 20C via the developer’s option. However, altering its default settings can sometimes make the Android phone run slow. If the speed is set slower, more delays are added to the animation. Hence, it takes a while for Your Tecno Spark 20C to launch an app or complete a certain process.

You’re Using an Outdated Android Version

If your Tecno Spark 20C is running slow and freezing, the Tecno Spark 20C device’s software is probably outdated. The mobile apps installed on your device are lagging or crashing because they’re no longer compatible with the OS. It happens most of the time. Hence, always watch out for OS updates.

Your Phone is Experiencing Some System Issues

Operating systems and device software serve as the main component of all smartphones. Sometimes, it runs into inevitable problems caused by computer bugs and other glitches. When it happens, the Tecno Spark 20C device’s overall performance is affected. So that can be the reason why sometimes your Tecno Spark 20C is running slow and freezing.

Your Internet Connection is Unstable

Of course, a slow internet connection can make the Android phone runs slow too. Most apps today rely heavily on the internet to execute some tasks like communicating and streaming. So don’t panic when your Tecno Spark 20C is running slow and freezing. It’s possible that your internet connection is messing up with you.

What to Do When My Tecno Spark 20C Lags?

It’s not as bad as the black screen of death when the Android phone runs slow. However, it can still cause some delays and inconvenience for users. So it’s really important to take action when you notice some anomalies with its speed and performance. Below are some remedies that can help you get rid of this issue.

Solution 1: Reboot Your Phone

Sometimes, minor bugs can give your device a hard time. It can be the reason why your Tecno Spark 20C is running slow and freezing. If that’s the case, rebooting your phone might help a lot. Here’s how to do it.

Step 1: For seven seconds or more, hold the Power and the Volume Down button together.

Step 2: Several options will manifest on the screen. From there, click Restart. Wait until your device completely shuts off and restarts again.

Solution 2: Uninstall the Unused Apps to Free Up Some Storage

If your Tecno Spark 20C is running slow and freezing, it’s likely because you’re running out of internal storage. You may uninstall the apps you rarely use to free up some space. Here’s how to do it.

Step 1: On your home screen, find the app you wish to uninstall. Hold its icon until an option list appears.
Step 2: Click Uninstall.

Step 3: Click Ok if it asks you to confirm the action.

Wait until the app icon disappears from the home screen.

Solution 3: Set the Animation Speed a Little Faster

Altering the animation speed is not that dangerous. However, it can sometimes interfere with the Tecno Spark 20C device’s smoothness if set too slow. If your Tecno Spark 20C is running slow and freezing after modifying this setting, try to re-adjust it a little faster. Here’s how to do it.

Initiate the following steps first to enable the developers option on your device. Skip this if you have already activated the developers option:

Step 1: Go to Settings.
Step 2: Find the About Phone option. Click on it.

Step 3: Find the Build Number. And then click on it seven times.
Step 4: Enter your lock screen passcode if necessary.

Follow these steps to adjust the animation speed:

Step 1: Tap Settings from your home screen.
Step 2: From the given options, find and click Systems.
Step 3: Click Developers options.
Step 4: Under the Drawing section, you’ll find the following animation scale settings: Window Animation Scale, Transition Animation Scale, and Animator Duration Scale. Adjust the speed of these three options to 0.5x.

Solution 4: Update Your Phone to the Latest Android Version

It’s always recommended to update your phone to the latest Android version. Aside from repairs to some system errors, it also keeps your phone compatible with mobile apps. An outdated operating system can be the reason why your Tecno Spark 20C runs slow, and the apps are freezing. Don’t worry. It’s very easy to perform. Here’s how to do it.

Step 1: First, ensure your internet connection is strong and stable to avoid unwanted interruptions.
Step 2: Go to Settings.
Step 3: Click About Phone.
Step 4: Click Check Now for Update. If there’s new software available, it will automatically appear on the screen.
Step 5: Click Install Now. Depending on your device, it will restart itself after the installation process.

Solution 5: Reset Your Tecno Spark 20C to Factory Settings

One way to restore the original performance of your Tecno Spark 20C is to revert it back to factory settings. It deletes all the phone’s data and adjusts the settings to default. Most of the time, this procedure works magic. It fixes numerous issues, including the Android phone that’s slow and constantly freezing. But ensure your phone has already been backed up before commencing this step. You may use Wondershare Dr.Fone to help you back up and secure your files.

Here’s how to back up your Tecno Spark 20C using Wondershare Dr.Fone:

Step 1: Download Wondershare Dr.Fone from its official website. And then install it on your desktop.
Step 2: Launch the application on your computer.
Step 3: After it fully loads, connect your Tecno Spark 20C to your computer.
Step 4: From the main dashboard, find and click Phone Backup. Ensure your device is in USB Debugging mode.

Step 5: Check the files or data you wish to back up. Right after, click Backup.

Here’s how to reset your Tecno Spark 20C to factory settings:

Step 1: Go to Settings.
Step 2: Click System.
Step 3: Click Reset Options.
Step 4: Click Erase All Data (Factory Reset).
Step 5: Your Android phone will inform you about the data that will be deleted from this procedure. From there, click Reset Phone.
Step 6: Your Android device will ask you to confirm the procedure. From there, click Erase Everything.

Solution 6: Fix the System Issue Using Wondershare Dr.Fone

The device’s operating system may sometimes run into unexpected problems. That can make your Tecno Spark 20C performs slow. System issue is not a terrifying scenario at all. Thanks to Wondershare Dr.Fone, which provides instant repair to this kind of mobile problem. Here’s how to use it in easy steps.

Step 1: Launch the Wondershare Dr.Fone application on your desktop. And then connect your Tecno Spark 20C to your computer.
Step 2: Click System Repair from the main dashboard or Toolbox section.

Step 3: Click Android.

Step 4: Wondershare Dr.Fone will give you a list of the Android problems that this procedure will fix. From there, click Start.

Step 5: Wondershare Dr.Fone will ask you to confirm your device details. Review the listed details for Brand, Name, Model, Country, and Carrier. Amend them if necessary. Tick the checkbox beside the Note if you agree to the terms. Lastly, click Next to proceed.

Step 6: At this point, you need to put your device into Download Mode. Power off your device. And then hold these three buttons altogether: Volume Down, Home (or Bixby if you’re using a newer model), and Power buttons. Finally, press the Volume Up button.

Step 7: Wondershare Dr.Fone will automatically download the firmware that matches your device’s specifications. Wait until the process has been completed.

Step 8: Thereafter, the details about the newly downloaded firmware package will be displayed on the screen. From there, click Fix Now.

Step 9: Before initiating the installation process, Wondershare Dr.Fone will ask you to review and confirm the firmware details. It will also let you know that this procedure will erase the phone’s data. If you agree to the terms, enter 000000 into the input box and click Confirm.

Step 10: Wait while Wondershare Dr.Fone installs the new firmware to your device.

Step 11: A notification will immediately appear after installing the new firmware. Click Done if your phone starts normally. Otherwise, click Try Again to repeat the process.

safe & secure

3,660,347 people have downloaded it

Conclusion

Android phone is capable of performing lots of stuff. It can assist you in both your personal and professional tasks. But if it’s sluggish and doesn’t execute optimally, the good things it promises all go down the drain. So if you notice that your Tecno Spark 20C is running slow and freezing, act fast to resolve the issue. Wondershare Dr.Fone can be of great help in this kind of situation. It’s an all-in-one mobile solution that can assist you with system repair, phone backup, data recovery, and a lot more.

Fix Guide

How To Fix Unresponsive Touch Screen on Tecno Spark 20C | Dr.fone