How to Flash Dead OnePlus Ace 2 Pro Safely | Dr.fone

How to Flash Dead OnePlus Ace 2 Pro Safely | Dr.fone

Abel Lv11

How to Flash Dead OnePlus Ace 2 Pro Safely

  • Fix malfunctioning Android to normal in one click.
  • Highest success rate to fix all Android issues.
  • Step-by-step guidance through the fixing process.
  • No skills required to operate this program.

A phone is considered to be dead when it becomes completely unresponsive and refuses to switch on. Similarly, an Android phone is said to be dead when it does not boot up. You may try to switch it on several times by pressing the power button but in vain. You will see no sign of the phone’s logo or anything like a welcome screen. The Android phone’s screen remains black and does not illuminate when you try to turn it on. Interestingly, even when you charge this dead device, it does not show that it is getting charged.

Many people regard this as a battery issue, and many think of it as a temporary software crash. Some users also seem to believe that this is because of a virus attack. However, if you are looking for ways that tell how to fix a dead Android phone, you must understand that a dead phone or device can be cured by flashing custom firmware safely. If you are keen to know how to flash a dead Android phone or how to flash dead Android phones using PC, here are ways to help you.

Given below are eight techniques to flash your OnePlus Ace 2 Pro safely, depending upon which phone you are using. It may seem time-consuming and tedious, but we can assure you that it works. So, move ahead and read on to learn about flashing new firmware, your OnePlus Ace 2 Pro, MTK Android, and OnePlus Ace 2 Pro safely.

safe Download safe & secure

Part 1: Can a Dead Phone Be Flashed?

Flashing a dead Android phone might be skeptical for many users who have been in such a situation. Although it is possible to flash a dead Android phone, it is essential to be aware of the reasons that lead you into such a situation. Before a remedy, diagnosing the problem is a necessity for retaining the OnePlus Ace 2 Pro device.

From battery issues to physical damage to the OnePlus Ace 2 Pro device, there can be many reasons your OnePlus Ace 2 Pro died. The reasons for a dead Android phone are not restricted to these points. There can be software-related issues or firmware issues that might cause such havoc on your Android.

Part 2: How to flash OnePlus Ace 2 Pro in one click

While you are worried about how to flash OnePlus Ace 2 Pro instantly with a single click, Dr.Fone - System Repair (Android) swiftly makes its way with a galore of options for you. This amazing tool from Wondershare can fix a plethora of Android system issues such as crashing of apps, black screen of death, failed system update, etc. Moreover, it can also get your device out of boot loop, unresponsive bricked Android mobiles as well as stuck at the OnePlus Ace 2 Pro logo.

Dr.Fone - System Repair (Android)

One-click solution to flash OnePlus Ace 2 Pro

  • The high success rate in fixing OnePlus Ace 2 Pro Android devices.
  • All the latest OnePlus Ace 2 Pro devices are supported by this software.
  • One-click operation of this tool helps you how to flash OnePlus Ace 2 Pro easily.
  • Being very intuitive, it doesn’t need you to be tech-savvy to use this software.
  • It is one of its kind and the first one-click Android repair software on the market.

3981454 people have downloaded it

Step-by-step Tutorial

We are going to explain how to flash a dead Android phone using a PC using Dr.Fone - System Repair (Android)

Note: Before you understand how to flash Dead Android phone, take a backup of your data and then proceed to avoid any data loss.

Phase 1: Prepare your OnePlus Ace 2 Pro

Step 1: Once you have downloaded and installed Dr.Fone, launch it. From the main menu, tap on ‘System Repair’ and get your OnePlus Ace 2 Pro connected to it.

how to flash Dead Android phone

Step 2: Click ‘Android Repair’ from the available options, and then press the ‘Start’ button to fix the Dead Android phone by flashing it.

android repair to flash dead phone

Step 3: On the OnePlus Ace 2 Pro device information screen, pick the appropriate device brand, name, model, and other details followed by tapping the ‘Next’ button.

choose brand info

Phase 2: Put the Android device in Download mode to start repair.

Step 1: It is essential to boot your OnePlus Ace 2 Pro in Download mode before repairing.

  • If the OnePlus Ace 2 Pro device has a ‘Home’ button: Turn it off and then hold down the ‘Volume Down’, ‘Home’, and ‘Power’ buttons altogether for 5-10 seconds. Un-hold all of them and hit the ‘Volume Up’ button for entering ‘Download’ mode.

flash android with home key

  • In the absence of a ‘Home’ button: Switch off the Android device and hold the ‘Volume Down’, ‘Bixby’, and ‘Power’ buttons for 5 to 10 seconds, then release them. Hit the ‘Volume Up’ button for entering the ‘Download’ mode.

flash android with no home key

Step 2: Press the ‘Next’ button for initiating firmware download.

flashing samsung galaxy

Step 3: Once the firmware gets downloaded and verified Dr.Fone - System Repair (Android) starts to flash your Dead Android phone. All the Android system issues will be fixed soon after.

dead android flashed

safe Download safe & secure

Part 3: How to flash OnePlus Ace 2 Pro dead phone with Odin?

In this segment, we will learn how to fix the dead Android phone, i.e., OnePlus Ace 2 Pro phones using Odin software. Odin is software used internally by OnePlus Ace 2 Pro to generally unblock devices and perform a more utility-based job, namely, flashing new firmware in place of the old one. There are different variants available, so choose the one which is supported by your Galaxy phone. Here is a step-by-step explanation of how to flash dead Android phone (OnePlus Ace 2 Pro) using Odin software.

Step 1: Install the driver software on the computer. You can find the best driver software for your device and PC on the official OnePlus Ace 2 Pro website. You may also download OnePlus Ace 2 Pro Kies on your PC. Once you have downloaded and installed the driver software, restart the PC.

Step 2: Now download suitable firmware for your device in the form of a zip folder that you can open and store on your desktop.

download suitable firmware

Make sure the file is .bin, .tar, or .tar.md5 only as these are the only file types recognized by Odin.

firmware zip file

firmware md5 file

Step 3: In this step, download the latest version of Odin on your PC and move it to the desktop, and then right-click on the downloaded Odin file to select “Run as Administrator”.

download odin

run as administrator

Step 4: Now, boot your dead device to Download Mode by pressing the power, volume down, and home button together. When the phone vibrates, release the power button only.

boot in download mode

Step 5: Gently press the volume up button, and you will see the Download Mode Screen.

android download mode

Step 6: Now, you may use a USB to connect your OnePlus Ace 2 Pro to the PC. Odin will recognize your device, and in the Odin window, you will see a message saying “Added”.

connect android device

Step 7: In this step, find the tar.md5 file you downloaded by clicking on “PDA” or “AP” on the Odin window and then click “Start”.

open md5 file

Finally, once the flashing process is complete, your OnePlus Ace 2 Pro phone will reboot and start normally, and you may see a “Pass” or “Reset” message on the Odin window on the PC.

Part 4: How to flash MTK Android dead phone with SP Flash tool?

SP Flash tool, also known as SmartPhone Flash tool is a popular freeware tool used to flash custom ROM or firmware in MTK Android phones. It is a very successful tool and is extremely easy to use.

Let us look at the steps given below to learn how to flash dead Android phones using PC with the help of the SP Flash tool.

Step 1: To start with, download and install the MTK driver on your PC and then download the ROM/firmware you wish to use for flashing purposes.

Step 2: Once done, you should download the SP Flash tool and extract it on your PC and move on to launch the Flash_tool.exe file to open the SP Flash tool window.

download sp flash tool

Step 3: Now, on the SP Flash tool window, click on “Download” and select “Scatter-loading”.

scatter loading

Step 4: The last step would be to locate the file downloaded by you and click “Open” and then finally, select “Download” on the SP Flash tool window.

load the downloaded file

After completing the above steps, connect your dead device to the PC with a USB cable and wait for it to get recognized. The flashing process will take a few minutes to finish and then you will see a green circle indicating “OK Download”.

That’s it! Now simply disconnect your phone and wait for it to reboot.

Part 5: How to flash OnePlus Ace 2 Pro dead phone with the Phoenix tool?

Phoenix tool, better known as PhoenixSuit, is a tool similar to the SP False tool and Odin. It works very well with OnePlus Ace 2 Pro and is the best answer to “How to fix dead Android phone?”, “How to flash dead Android phone using PC?”, etc.

Let’s look at the steps of flashing the OnePlus Ace 2 Pro dead phone with the Phoenix tool.

First, download and install the OnePlus Ace 2 Pro PC Suite driver on your PC. Then you will need to download the PhoenixSuit tool and then launch it.

nokia pc suite

Now, on the toolbar, click “Tools” and select “Data Package Download” from the drop-down list.

data package download

Then move to download the firmware for your dead OnePlus Ace 2 Pro and save it in a new Folder. Once done, go back to the Phoenix tool window and click on “File” and select “Open Product”.

open product

Simply, feed in the details and then click “OK”.

check the details

After this, click on “Flashing” and select “Firmware update” and then browse to select the appropriate product code and then click “OK” again.

Then move on to select “Dead Phone USB Flashing” from the Firmware Update Box.

dead phone usb flashing

Lastly, just click on “Refurbish” and connect your phone to the PC using a USB cable.

That was it, the flashing process may take up to a few minutes after which your dead OnePlus Ace 2 Pro will restart automatically.

Part 6: How to flash a dead phone that won’t turn on via factory reset?

Using tools for flashing Android devices can be a solution; however, it is heavily restricted to the OnePlus Ace 2 Pro device models. For a generalized solution, there can be other options that you can go with. Factory resetting an Android device by putting it in Recovery Mode is one way. To know how to flash a dead Android phone using factory reset, go through the steps featured below:

Step 1: To initiate the process, you will have to put your OnePlus Ace 2 Pro in Recovery Mode. Generally, Android phones are put in Recovery Mode by holding the “Power” and “Volume Up” keys for a few seconds after turning them off. The key combinations can vary according to your OnePlus Ace 2 Pro.

Step 2: As the Android boot menu opens on your screen, use the “Volume Down” and “Volume Up” keys to scroll up and down the menu. On accessing the “Wipe Data/Factory Reset” option, use the “Power” key to select the particular option.

choose wipe data factory reset option

Step 3: Continue to select the “Yes” option for confirming the factory reset of the Android device. The phone will automatically reboot after successfully factory resetting.

Part 7: How to flash a dead Android phone by checking screen faulty

The screen of your OnePlus Ace 2 Pro may be faulty, due to which it is not launching. While seeking the right way of how to fix a dead Android phone, you can force restart your phone using the Volume buttons according to your device model.

If the Android vibrates on restarting and the screen does not lighten up, the problem can be directed to a hardware fault. The screen is broken and needs physical assistance to resolve the issue.

check and fix the screen

Part 8: How to fix a dead Android phone by changing the battery

Another solution that can help you fix the dead Android phone is changing its battery. The battery of an Android device can last up to 3 years. When its capacity drops to a bare minimum, it is best to change the battery of your Android. Upon trying to restart your OnePlus Ace 2 Pro, if it does not, you might need to replace your battery. All Android phone batteries are removable, which should be regulated with proper supervision.

replace the android battery

Part 9: How to repair dead Android phone by contacting official support

If you are unable to discover any proper solution for how to flash dead Android phones, you might have to consult the respective customer support of the Android phone manufacturers. Consult customer support to discover why the phone is dead and how it can be flashed. The respective personnel will assist you in resolving the issue, which might require monetary input from your side.

Conclusion

A dead Android phone might be the cause of worry, but the techniques given above to flash your dead Android device safely are very helpful. These methods have been tried and tested by users all over the world and thus, we recommend them to you. If your phone is dead or has become unresponsive, do not panic. Depending on your phone’s brand, here are ways to guide you on how to fix the dead Android phone and how to flash dead Android phone using PC.

It has been observed that Wondershare Dr.Fone – System Repair (Android) assists in the best way. Resolve all your concerns involving your dead Android phone and flash it to make it operable again.

Carefully follow the instructions given, and you will be able to reboot your dead Android phone successfully.

OnePlus Ace 2 Pro Screen Unresponsive? Here’s How to Fix It

OnePlus Ace 2 Pro phones have become increasingly popular due to their advanced features, sleek designs, and affordable prices. These phones offer many benefits, including high-quality cameras, long battery life, and fast processing speeds. However, sometimes users may encounter problems such as a OnePlus Ace 2 Pro touch screen not working, which can be frustrating and difficult.

This article aims to provide solutions for OnePlus Ace 2 Pro phone users experiencing screen unresponsiveness. We will explore various reasons this issue may occur and discuss step-by-step instructions for fixing the problem. So, if your OnePlus Ace 2 Pro touchscreen is not working, don’t worry – we’ve got you covered!

What Causes A OnePlus Ace 2 Pro Screen Unresponsive?

There are several reasons why a OnePlus Ace 2 Pro phone’s screen may become unresponsive. Some common causes include software issues, hardware problems, or issues with the touchscreen itself. It’s essential to identify the root cause of the problem to fix it properly.

Below are some possible causes of OnePlus Ace 2 Pro screen unresponsiveness, along with explanations of each.

  • Soft-bricked software: Soft-bricking refers to the state where the phone is stuck in an infinite boot loop or unable to boot. It can occur due to corrupt system files, outdated firmware, or unsuccessful updates. For example, some OnePlus Ace 2 Pro Y2 and 5A users have reported their screens getting stuck on the boot logo after a software update, rendering the OnePlus Ace 2 Pro device unusable.

  • Equipment is worn out: Hardware problems can also cause OnePlus Ace 2 Pro screens to become unresponsive. It can be due to worn-out equipment, such as a damaged LCD screen, malfunctioning touch sensor, or loose ribbon cables. These issues can also occur in any OnePlus Ace 2 Pro model, including the Y2 and 5A.

  • **Touchscreen problems:**Sometimes, the touchscreen itself can become unresponsive for various reasons. For instance, OnePlus Ace 2 Pro Y2 and 5A users may face this issue if they have accidentally dropped their phone, exposed it to water, or used an incompatible screen protector. It can result in a damaged or malfunctioning touchscreen, making it difficult or impossible to operate the phone.

The Common Solutions To Solve A OnePlus Ace 2 Pro Screen Unresponsive

In the previous section, we identified the possible causes of OnePlus Ace 2 Pro screen unresponsiveness, including soft-bricked software, hardware problems, and touchscreen issues. While the underlying reasons for screen unresponsiveness can be varied and complex, some common solutions can help resolve the issue. Here are three of the most common solutions to address tablet screen unresponsiveness, no matter the OnePlus Ace 2 Pro model.

1. Restart The Device

mui restart button

Restarting the phone is typically the initial solution that comes to mind when we encounter the OnePlus Ace 2 Pro black screen problem. It’s a simple and widely used method to address the issue, as the black screen problem could be caused by a software glitch, which can often be resolved by freeing up the phone’s memory.

It is the most commonly used method to fix OnePlus Ace 2 Pro’s touch screen and power button issues, such as unresponsiveness. By restarting the OnePlus Ace 2 Pro device, background processes are disabled, and memory is freed up, allowing programs to run smoothly and potentially resolve the problem. To restart a OnePlus Ace 2 Pro device, press the Power and Volume Up buttons simultaneously, and release the Power button once the OnePlus Ace 2 Prologo appears.

2. Leave The Phone And Let The Battery Drain Completely

low battery

Sometimes, the tablet screen may become unresponsive due to a software issue preventing the OnePlus Ace 2 Pro device from functioning correctly. Leaving the OnePlus Ace 2 Pro device unused and draining the battery helps resolve these issues. After fully discharging the battery, the OnePlus Ace 2 Pro device can be recharged and turned back on, potentially resolving the issue.

3. Contact Custom Service

xiaomi contact customer service

If restarting the OnePlus Ace 2 Pro device or allowing the battery to drain doesn’t resolve the issue, seeking professional assistance is recommended. The manufacturer may provide additional troubleshooting steps or recommend sending the OnePlus Ace 2 Pro device in for repair or replacement. It’s important to check the warranty before contacting customer service, which may affect repair or replacement options.

In addition to the common solutions we discussed earlier, some model-specific solutions can help resolve the screen unresponsiveness issue on OnePlus Ace 2 Pro Y2 and OnePlus Ace 2 Pro 5A.

4. Optimize Device Performance

One solution is to optimize the OnePlus Ace 2 Pro device performance by clearing the cache, removing unwanted apps, and disabling unnecessary features. This method can help free up memory and resolve the issue.

You can clear your cached data using the default settings.

  • Select Settings> Storage > Cached Data.
  • To clear the cache, select Clear Cache.

clear cached data on xiaomi 5a

5. Back Up And Factory Reset

Another solution is to back up the OnePlus Ace 2 Pro device and perform a factory reset, which can help reset the OnePlus Ace 2 Pro device to its original state and remove any software glitches that may be causing the screen unresponsiveness. The factory settings on your phone will restore any data saved by third-party applications and some of the phone’s settings when it was first built. Note that this method erases all data from the OnePlus Ace 2 Pro device, so it should only be considered a last resort.

In the following steps, we will show you how to format the OnePlus Ace 2 Pro Redmi 5A to erase all your data and restore it to its factory state.

  • Open the Settings.
  • Navigate to the Additional settings section of the OnePlus Ace 2 Pro Redmi 5A settings.
  • Please scroll down the screen until you reach the Backup & reset option, then click to access it.
  • ClickErase all data (factory reset) to restore the network settings and applications, or completely reset the OnePlus Ace 2 Pro Redmi 5A.
  • Select All files on the phoneto make a complete format of the OnePlus Ace 2 Pro Redmi 5A.

factory reset on xiaomi 5a

6. Using Dr. Fone Repair

If none of the above solutions worked, you can try using Dr. Fone Repair. This software is designed to fix various software issues on Android phones, including OnePlus Ace 2 Pro devices. It can fix issues such as screen stuck on boot, black screen, and other software-related problems. Dr. Fone Repair is easy to use and can protect your data and files on your phone.

Here’s how to fix repair screen unresponsiveness or any software-related issues on OnePlus Ace 2 Pro Y2 and OnePlus Ace 2 Pro 5A using Dr. Fone Repair:

  • Begin by installing and opening Dr.Foneon your PC.
  • Once opened, select the ‘System Repair’ option and connect your Android smartphone to your PC via USB cable.
  • On the next screen, chooseAndroid****Repair“ from the list of available options.
  • Click on the “Start“ button to initiate the repair process.
  • You will then be prompted to enter the required device information such as the OnePlus Ace 2 Pro device name, model number, and firmware version.
  • Once you have entered the necessary information, click on the ‘Next’ button to proceed.
  • Follow the on-screen instructions carefully to repair your OnePlus Ace 2 Pro.

dr fone repair on xiaomi devices

How To Avoid A OnePlus Ace 2 Pro Screen Unresponsive?

To avoid facing a OnePlus Ace 2 Pro screen unresponsive issue, users can take several preventative measures. One important step is to update the OnePlus Ace 2 Pro phone regularly to ensure the software is up to date and all bugs and glitches are fixed. Users can also use tools like Dr. Fone to regularly manage and repair data, including clearing cache and removing unwanted apps. It is also important to use quality charging cables and avoid exposing the OnePlus Ace 2 Pro device to extreme temperatures or humidity, which can damage the internal components and potentially cause screen unresponsiveness. Finally, users can avoid dropping or mishandling the OnePlus Ace 2 Pro device, leading to physical damage and causing the screen to become unresponsive. Users can help prevent screen unresponsiveness by taking these steps and ensuring their OnePlus Ace 2 Pro device runs smoothly and reliably.

safe Download safe & secure

Conclusion

Encountering a OnePlus Ace 2 Pro screen unresponsive issue can be a common problem for some OnePlus Ace 2 Pro phone users. However, with the solutions we have provided in this article, you can effectively solve the problem and get your phone back up and running in no time. It’s important to remember to regularly back up your data and take preventative measures, such as avoiding harmful malware and keeping your phone updated, to avoid experiencing this issue in the future.

By using reliable software, like Dr.Fone Repair, you can ensure that your OnePlus Ace 2 Pro phone is well-maintained and operating smoothly. With these solutions and tips, you can enjoy the benefits of your OnePlus Ace 2 Pro phone without any interruptions.

Guide: How To Unbrick a Bricked OnePlus Ace 2 Pro Phone

OnePlus Ace 2 Pro phones are super popular thanks to their excellent features and affordable prices. But being so popular means people try to customize them with custom software. If you’re not careful, you might have a “bricked” OnePlus Ace 2 Pro phone. It won’t work at all. It will be more like a brick than a smartphone.

Don’t worry, though. This guide is here to help. It will show you how to unbrick your phone step by step. You’ll learn to bring your phone back to life and make it work again. So, get started on fixing your bricked OnePlus Ace 2 Pro phone by reading this article.

destroyed system xiaomi phone

Part 1. Common Reasons Why OnePlus Ace 2 Pro Phones Get Bricked

A bricked phone might sound like a techy term, but it’s pretty simple – when your OnePlus Ace 2 Pro phone turns into a lifeless block that won’t do anything. In this section, you’ll learn all about why this happens, so you can avoid these issues and keep your phone alive as long as possible.

android logo head with broken glass

  • Trying to flash incompatible ROMs. Sometimes, people want their OnePlus Ace 2 Pro phones to run different software like a custom version of Android called a ROM. But if you use the correct ROM for your specific phone, it can mess things up nicely. Also, inexperience with ROM flashing can hard brickyour OnePlus Ace 2 Pro Be sure to follow guides and ask for community help online.
  • Rooting mishaps/failures.“Rooting” means giving your phone superpowers, but if you mess up, it can go wrong. Your phone might not boot up, leaving you with a brick. Like the previous bullet, follow guides carefully, especially if inexperienced.
  • Failed Firmware Updates. When your phone asks you to update its software, following the instructions carefully is essential. If you interrupt the process or something goes wrong, your phone could be bricked.

Now, you must know about soft and hard-bricking to learn how to diagnose your phone. Soft bricking is like a phone’s bad day – it might not start up. However, with the right help, you can fix it. Hard bricking is worse. It’s when your phone is a paperweight – it won’t turn on, respond, or do anything useful.

Part 2. Method 1: Use the OnePlus Ace 2 Pro Flash Tool

Say you’ve accidentally bricked your OnePlus Ace 2 Pro phone due to rooting or ROM flashing. You might feel scared, but imagine having a magic wand that can fix your bricked phone. That’s what the OnePlus Ace 2 Pro Flash Tool is –a dedicated OnePlus Ace 2 Pro unbricking tool. It lets you install or flash different software onto your phone, giving it a fresh start. Most of the time, a simple firmware flash will unbrick your OnePlus Ace 2 Pro.

The OnePlus Ace 2 Pro Flash Tool is a superhero for various situations. Here are some scenarios where it can save the day:

  • **Device Recovery.**If your phone is bricked or acting strange, the Flash Tool can help bring it back to life.
  • Firmware Updates. You can use it to install official updates released by OnePlus Ace 2 Pro, ensuring your phone runs smoothly.
  • **Device Customization.**Want a different look for your phone? The Flash Tool can help you install custom ROMs or themes.
  • **Bug Fixes.**Got pesky bugs or glitches? The Flash Tool can replace corrupted software to make your phone behave.
  • Performance Enhancement. If your phone feels sluggish, the Flash Tool can boost its speed by flashing a new OS.

How To Use the OnePlus Ace 2 Pro Flash Tool To Unbrick a OnePlus Ace 2 Pro Phone

Now that you know what the OnePlus Ace 2 Pro Flash Tool is all about, it’s time to learn how to use it. If you’ve bricked your OnePlus Ace 2 Pro phone, follow the steps below:

  • Step 1. Download the OnePlus Ace 2 Pro Flash Tool and the stock firmware of your device on your computer.
  • Step 2. Turn off your phone. Then, press and hold the Volume Down + Power Key simultaneously for 6-8 seconds. This will force your phone to enter the Fastboot mode.

xiaomi press hold buttons together

  • Step 3. Connect your phone to your computer using a cable when you see this screen flash.

xiaomi fastboot screen

  • Step 4. Using the OnePlus Ace 2 Pro Flash Tool, click Select. Then, locate the firmware files you downloaded earlier.

xiaomi flash tool browse for folder menu

  • Step 5. Click the refresh button until the flash tool recognizes your device. Then, click flash to replace the firmware. A text saying “success” should appear under the result column.

xiaomi flash tool success screen

Congratulations! Your phone should be up and working after following these steps.

Part 3. Method 2: Wondershare Dr.Fone

If you gave the OnePlus Ace 2 Pro Flash Tool a shot and your phone is still not cooperating, don’t lose hope. Sometimes, the magic touch needs a slight variation. That’s where Dr.Fone comes into play. This dedicated software can work wonders when fixing various phone problems. It can even help in cases of bricked OnePlus Ace 2 Pro phones involving software or firmware issues.

dr.fone wondershare

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

  • Fix your Android to normal, no skills required.
  • Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
  • The high success rate in resolving Android system issues.
  • Compatible with a wide range of Android devices and OS versions
  • User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

wondershare dr.fone interface

One of Dr.Fone’s most astonishing powers is its “System Repair” feature. This is where the real magic happens. If your OnePlus Ace 2 Pro phone is bricked, it can help repair the underlying software glitches that caused the issue. Moreover, Dr.Fone brings a toolbox of features to the table, making it more than just a one-trick pony. Here are its key features:

  • **Data Recovery:**If you’ve lost precious data, Dr.Fone can help recover it, even from a bricked phone.
  • **Data Transfer:**You can quickly move data between devices, even if one is unresponsive.
  • **System Backup & Restore:**Fone can help you create a backup of your phone’s system and restore it when needed.
  • **Unlocking Tools:**If you’re locked out of your phone, Dr.Fone can help you regain access.

How To Use Dr.Fone System Recovery Feature To Unbrick a OnePlus Ace 2 Pro Phone

Now that you know about Dr.Fone, it’s time to understand how to use it. Hopefully, it can save your bricked OnePlus Ace 2 Pro phone from its problems. Follow the steps below:

  • Step 1. DownloadDr.Fone from its official website , and launch it on your computer. After entering the Toolbox menu from the left panel, click System Repair. Make sure that your OnePlus Ace 2 Pro phone is connected.
  • Step 2. Select Android on the next screen.

wondershare dr.fone phone os chooser

  • Step 3. Initiate the Android System Repair by clicking Start.

wondershare dr.fone system repair start screen

  • Step 4. Confirm your device details. You can edit any details that might be wrong.

wondershare dr.fone device details confirmation

  • Step 5. Put your phone into Download mode. Follow the guidelines for phones with or without home buttons. Your phone will begin downloading the dedicated firmware.

wondershare dr.fone download mode tutorial

  • Step 6. After downloading the firmware, verify and proceed with the installation by clicking Fix Now. Confirm firmware installation by typing “000000” into the text box in the appearing window. Click Confirm afterward.

wondershare dr.fone initiate system repair

  • Step 7. After the process is finished, your phone should now be okay. Click Done.

wondershare dr.fone success screen

Part 4. Best Practices/Tips Before Unbricking Your Phone

Before diving into the unbricking process, you must arm yourself with some tips and precautions to ensure your recovery journey is as smooth as possible. Here’s what you need to know:

  • Backing Up Data: An Ounce of Prevention. Remember the golden rule: always back up your data before attempting any phone recovery. Unbricking might save your phone, but being safe is better than sorry.
  • **Authentic Tools and Software: Stay on the Safe Side.**Using genuine and trustworthy tools is crucial when unbricking your OnePlus Ace 2 Pro This applies especially to Dr.Fone, which you should only download from the official website. Additionally, when recovering your phone’s software, use authentic OnePlus Ace 2 Pro ROMs (the operating system’s files).
  • **Learning from Online Guides and Communities: Seek Guidance.**Navigating the unbricking process might seem daunting, but you’re not alone. There are many online guides, tutorials, and communities where people share their experiences and solutions.

Conclusion

So, there you have it – your guide to fixing a bricked OnePlus Ace 2 Pro phone. Remember, bricking happens when your phone stops working. You won’t be afraid when that happens, as you learned about the OnePlus Ace 2 Pro Flash Tool and Dr.Fone. They are your phone-saving superheroes that can unbrick even a hard-bricked OnePlus Ace 2 Pro phone.

As a parting reminder, always keep a tool ready for emergencies. For this, choose Dr.Fone. It’s a super tool for all your phone problems. Give it a shot and be confident with your phone wherever you go and whatever you do with it.

safe Download safe & secure

3,052,835 people have downloaded it


  • Title: How to Flash Dead OnePlus Ace 2 Pro Safely | Dr.fone
  • Author: Abel
  • Created at : 2024-07-14 06:07:43
  • Updated at : 2024-07-15 06:07:43
  • Link: https://fix-guide.techidaily.com/how-to-flash-dead-oneplus-ace-2-pro-safely-drfone-by-drfone-fix-android-problems-fix-android-problems/
  • License: This work is licensed under CC BY-NC-SA 4.0.
On this page
How to Flash Dead OnePlus Ace 2 Pro Safely | Dr.fone