How to Flash Dead Realme Narzo 60 Pro 5G Safely | Dr.fone

How to Flash Dead Realme Narzo 60 Pro 5G Safely | Dr.fone

Abel Lv11

How to Flash Dead Realme Narzo 60 Pro 5G Safely

  • Fix malfunctioning Android to normal in one click.
  • Highest success rate to fix all Android issues.
  • Step-by-step guidance through the fixing process.
  • No skills required to operate this program.

A phone is considered to be dead when it becomes completely unresponsive and refuses to switch on. Similarly, an Android phone is said to be dead when it does not boot up. You may try to switch it on several times by pressing the power button but in vain. You will see no sign of the phone’s logo or anything like a welcome screen. The Android phone’s screen remains black and does not illuminate when you try to turn it on. Interestingly, even when you charge this dead device, it does not show that it is getting charged.

Many people regard this as a battery issue, and many think of it as a temporary software crash. Some users also seem to believe that this is because of a virus attack. However, if you are looking for ways that tell how to fix a dead Android phone, you must understand that a dead phone or device can be cured by flashing custom firmware safely. If you are keen to know how to flash a dead Android phone or how to flash dead Android phones using PC, here are ways to help you.

Given below are eight techniques to flash your Realme Narzo 60 Pro 5G safely, depending upon which phone you are using. It may seem time-consuming and tedious, but we can assure you that it works. So, move ahead and read on to learn about flashing new firmware, your Realme Narzo 60 Pro 5G, MTK Android, and Realme Narzo 60 Pro 5G safely.

safe Download safe & secure

Part 1: Can a Dead Phone Be Flashed?

Flashing a dead Android phone might be skeptical for many users who have been in such a situation. Although it is possible to flash a dead Android phone, it is essential to be aware of the reasons that lead you into such a situation. Before a remedy, diagnosing the problem is a necessity for retaining the Realme Narzo 60 Pro 5G device.

From battery issues to physical damage to the Realme Narzo 60 Pro 5G device, there can be many reasons your Realme Narzo 60 Pro 5G died. The reasons for a dead Android phone are not restricted to these points. There can be software-related issues or firmware issues that might cause such havoc on your Android.

Part 2: How to flash Realme Narzo 60 Pro 5G in one click

While you are worried about how to flash Realme Narzo 60 Pro 5G instantly with a single click, Dr.Fone - System Repair (Android) swiftly makes its way with a galore of options for you. This amazing tool from Wondershare can fix a plethora of Android system issues such as crashing of apps, black screen of death, failed system update, etc. Moreover, it can also get your device out of boot loop, unresponsive bricked Android mobiles as well as stuck at the Realme Narzo 60 Pro 5G logo.

Dr.Fone - System Repair (Android)

One-click solution to flash Realme Narzo 60 Pro 5G

  • The high success rate in fixing Realme Narzo 60 Pro 5G Android devices.
  • All the latest Realme Narzo 60 Pro 5G devices are supported by this software.
  • One-click operation of this tool helps you how to flash Realme Narzo 60 Pro 5G easily.
  • Being very intuitive, it doesn’t need you to be tech-savvy to use this software.
  • It is one of its kind and the first one-click Android repair software on the market.

3981454 people have downloaded it

Step-by-step Tutorial

We are going to explain how to flash a dead Android phone using a PC using Dr.Fone - System Repair (Android)

Note: Before you understand how to flash Dead Android phone, take a backup of your data and then proceed to avoid any data loss.

Phase 1: Prepare your Realme Narzo 60 Pro 5G

Step 1: Once you have downloaded and installed Dr.Fone, launch it. From the main menu, tap on ‘System Repair’ and get your Realme Narzo 60 Pro 5G connected to it.

how to flash Dead Android phone

Step 2: Click ‘Android Repair’ from the available options, and then press the ‘Start’ button to fix the Dead Android phone by flashing it.

android repair to flash dead phone

Step 3: On the Realme Narzo 60 Pro 5G device information screen, pick the appropriate device brand, name, model, and other details followed by tapping the ‘Next’ button.

choose brand info

Phase 2: Put the Android device in Download mode to start repair.

Step 1: It is essential to boot your Realme Narzo 60 Pro 5G in Download mode before repairing.

  • If the Realme Narzo 60 Pro 5G device has a ‘Home’ button: Turn it off and then hold down the ‘Volume Down’, ‘Home’, and ‘Power’ buttons altogether for 5-10 seconds. Un-hold all of them and hit the ‘Volume Up’ button for entering ‘Download’ mode.

flash android with home key

  • In the absence of a ‘Home’ button: Switch off the Android device and hold the ‘Volume Down’, ‘Bixby’, and ‘Power’ buttons for 5 to 10 seconds, then release them. Hit the ‘Volume Up’ button for entering the ‘Download’ mode.

flash android with no home key

Step 2: Press the ‘Next’ button for initiating firmware download.

flashing samsung galaxy

Step 3: Once the firmware gets downloaded and verified Dr.Fone - System Repair (Android) starts to flash your Dead Android phone. All the Android system issues will be fixed soon after.

dead android flashed

safe Download safe & secure

Part 3: How to flash Realme Narzo 60 Pro 5G dead phone with Odin?

In this segment, we will learn how to fix the dead Android phone, i.e., Realme Narzo 60 Pro 5G phones using Odin software. Odin is software used internally by Realme Narzo 60 Pro 5G to generally unblock devices and perform a more utility-based job, namely, flashing new firmware in place of the old one. There are different variants available, so choose the one which is supported by your Galaxy phone. Here is a step-by-step explanation of how to flash dead Android phone (Realme Narzo 60 Pro 5G) using Odin software.

Step 1: Install the driver software on the computer. You can find the best driver software for your device and PC on the official Realme Narzo 60 Pro 5G website. You may also download Realme Narzo 60 Pro 5G Kies on your PC. Once you have downloaded and installed the driver software, restart the PC.

Step 2: Now download suitable firmware for your device in the form of a zip folder that you can open and store on your desktop.

download suitable firmware

Make sure the file is .bin, .tar, or .tar.md5 only as these are the only file types recognized by Odin.

firmware zip file

firmware md5 file

Step 3: In this step, download the latest version of Odin on your PC and move it to the desktop, and then right-click on the downloaded Odin file to select “Run as Administrator”.

download odin

run as administrator

Step 4: Now, boot your dead device to Download Mode by pressing the power, volume down, and home button together. When the phone vibrates, release the power button only.

boot in download mode

Step 5: Gently press the volume up button, and you will see the Download Mode Screen.

android download mode

Step 6: Now, you may use a USB to connect your Realme Narzo 60 Pro 5G to the PC. Odin will recognize your device, and in the Odin window, you will see a message saying “Added”.

connect android device

Step 7: In this step, find the tar.md5 file you downloaded by clicking on “PDA” or “AP” on the Odin window and then click “Start”.

open md5 file

Finally, once the flashing process is complete, your Realme Narzo 60 Pro 5G phone will reboot and start normally, and you may see a “Pass” or “Reset” message on the Odin window on the PC.

Part 4: How to flash MTK Android dead phone with SP Flash tool?

SP Flash tool, also known as SmartPhone Flash tool is a popular freeware tool used to flash custom ROM or firmware in MTK Android phones. It is a very successful tool and is extremely easy to use.

Let us look at the steps given below to learn how to flash dead Android phones using PC with the help of the SP Flash tool.

Step 1: To start with, download and install the MTK driver on your PC and then download the ROM/firmware you wish to use for flashing purposes.

Step 2: Once done, you should download the SP Flash tool and extract it on your PC and move on to launch the Flash_tool.exe file to open the SP Flash tool window.

download sp flash tool

Step 3: Now, on the SP Flash tool window, click on “Download” and select “Scatter-loading”.

scatter loading

Step 4: The last step would be to locate the file downloaded by you and click “Open” and then finally, select “Download” on the SP Flash tool window.

load the downloaded file

After completing the above steps, connect your dead device to the PC with a USB cable and wait for it to get recognized. The flashing process will take a few minutes to finish and then you will see a green circle indicating “OK Download”.

That’s it! Now simply disconnect your phone and wait for it to reboot.

Part 5: How to flash Realme Narzo 60 Pro 5G dead phone with the Phoenix tool?

Phoenix tool, better known as PhoenixSuit, is a tool similar to the SP False tool and Odin. It works very well with Realme Narzo 60 Pro 5G and is the best answer to “How to fix dead Android phone?”, “How to flash dead Android phone using PC?”, etc.

Let’s look at the steps of flashing the Realme Narzo 60 Pro 5G dead phone with the Phoenix tool.

First, download and install the Realme Narzo 60 Pro 5G PC Suite driver on your PC. Then you will need to download the PhoenixSuit tool and then launch it.

nokia pc suite

Now, on the toolbar, click “Tools” and select “Data Package Download” from the drop-down list.

data package download

Then move to download the firmware for your dead Realme Narzo 60 Pro 5G and save it in a new Folder. Once done, go back to the Phoenix tool window and click on “File” and select “Open Product”.

open product

Simply, feed in the details and then click “OK”.

check the details

After this, click on “Flashing” and select “Firmware update” and then browse to select the appropriate product code and then click “OK” again.

Then move on to select “Dead Phone USB Flashing” from the Firmware Update Box.

dead phone usb flashing

Lastly, just click on “Refurbish” and connect your phone to the PC using a USB cable.

That was it, the flashing process may take up to a few minutes after which your dead Realme Narzo 60 Pro 5G will restart automatically.

Part 6: How to flash a dead phone that won’t turn on via factory reset?

Using tools for flashing Android devices can be a solution; however, it is heavily restricted to the Realme Narzo 60 Pro 5G device models. For a generalized solution, there can be other options that you can go with. Factory resetting an Android device by putting it in Recovery Mode is one way. To know how to flash a dead Android phone using factory reset, go through the steps featured below:

Step 1: To initiate the process, you will have to put your Realme Narzo 60 Pro 5G in Recovery Mode. Generally, Android phones are put in Recovery Mode by holding the “Power” and “Volume Up” keys for a few seconds after turning them off. The key combinations can vary according to your Realme Narzo 60 Pro 5G.

Step 2: As the Android boot menu opens on your screen, use the “Volume Down” and “Volume Up” keys to scroll up and down the menu. On accessing the “Wipe Data/Factory Reset” option, use the “Power” key to select the particular option.

choose wipe data factory reset option

Step 3: Continue to select the “Yes” option for confirming the factory reset of the Android device. The phone will automatically reboot after successfully factory resetting.

Part 7: How to flash a dead Android phone by checking screen faulty

The screen of your Realme Narzo 60 Pro 5G may be faulty, due to which it is not launching. While seeking the right way of how to fix a dead Android phone, you can force restart your phone using the Volume buttons according to your device model.

If the Android vibrates on restarting and the screen does not lighten up, the problem can be directed to a hardware fault. The screen is broken and needs physical assistance to resolve the issue.

check and fix the screen

Part 8: How to fix a dead Android phone by changing the battery

Another solution that can help you fix the dead Android phone is changing its battery. The battery of an Android device can last up to 3 years. When its capacity drops to a bare minimum, it is best to change the battery of your Android. Upon trying to restart your Realme Narzo 60 Pro 5G, if it does not, you might need to replace your battery. All Android phone batteries are removable, which should be regulated with proper supervision.

replace the android battery

Part 9: How to repair dead Android phone by contacting official support

If you are unable to discover any proper solution for how to flash dead Android phones, you might have to consult the respective customer support of the Android phone manufacturers. Consult customer support to discover why the phone is dead and how it can be flashed. The respective personnel will assist you in resolving the issue, which might require monetary input from your side.

Conclusion

A dead Android phone might be the cause of worry, but the techniques given above to flash your dead Android device safely are very helpful. These methods have been tried and tested by users all over the world and thus, we recommend them to you. If your phone is dead or has become unresponsive, do not panic. Depending on your phone’s brand, here are ways to guide you on how to fix the dead Android phone and how to flash dead Android phone using PC.

It has been observed that Wondershare Dr.Fone – System Repair (Android) assists in the best way. Resolve all your concerns involving your dead Android phone and flash it to make it operable again.

Carefully follow the instructions given, and you will be able to reboot your dead Android phone successfully.

11 Proven Solutions to Fix Google Play Store Not Working Issue on Realme Narzo 60 Pro 5G

Google Play Store is a necessary and bundled service of any Android device. This app is required to download or even run any apps. So, getting an error like Play store not working or Play Store crashing is very unfortunate and a matter of a headache. Here we tried to put the best solution to overcome this issue. Keep reading this article for all the 11 best solutions.

If you search on the internet, you may find various tricks dealing with Google Play Store not working issue. However, either to try each of them or choose several to follow would certainly cost a lot of time. What’s more, we are not sure whether they will really work. Therefore, we would recommend you with a more effective and fast way, that is to use Dr.Fone - System Repair (Android) , a dedicated Android repair tool to fix Google Play Store, not working issues just in one click.

Dr.Fone - System Repair (Android)

A most effective method to fix Google Play Store not working

  • Fix all Android system issues like the black screen of death, won’t turn on, system UI not working, etc.
  • Industry’s 1st tool for one-click Android repair.
  • Supports all the new Realme Narzo 60 Pro 5G devices like Galaxy S8, S9, etc.
  • Step-by-step instructions provided. No technicals skills required.

3981454 people have downloaded it

Brief steps to guide you through the process of fixing Google Play Store not working (followed by video tutorial):

  1. Get this tool downloaded on your computer. Install and launch it, and you can find the following welcome screen displayed.

fix google play store not working using a dedicated tool

  1. Select the option “System Repair”. In the new interface, click on the “Android Repair” tab.

fix google play store not working by selecting the repair option

  1. Start fixing Google Play Store not working by clicking “Start”. Select and confirm the correct model details as instructed.

fix google play store not working in download mode

  1. Activate the Download mode from your Realme Narzo 60 Pro 5G.

fix google play store not working in download mode

  1. After entering the Download mode, the Dr.Fone tool starts to download the correct firmware to your Android.

download firmware

  1. The downloaded firmware will be loaded and flashed to your Realme Narzo 60 Pro 5G to fix the Google Play Store not working issue.

fix google play store stopping by flashing firmware

  1. Wait until the Android repair process is complete. Start your Android and Google Play Store, you can then find that the Google Play Store not working issue no longer exists.

google play store stopping fixed

Video tutorial to fix Google Play Store not working

Part 2: Other 10 common methods to fix Google Play Store issues

1. Fix Date and Time settings

Sometimes Google creates a problem connecting with the Play Store or Play store crashing due to the wrong date and time. The first and most common thing is you have to check if the date and time are updated or not. If not, update it first by following the below step by step guide.

Step 1 – First, go to the “Settings” of your device. Find ‘Date and time’ and tap on it.

Find ‘Date and time’

Step 2 – Now you can see several options. Select “Automatic date and time”. This should override the wrong date and time your device have. Else, deselect the tick beside that option and select the date and time manually.

Select “Automatic date and time”

Step 3 – Now, go to the Play store and try to connect again. This should be working without any problem now.

2. Cleaning of Cache data of Play Store

This may happen that sometimes Google Play Store stopped working due to excessive unnecessary data stored in the cache of the Realme Narzo 60 Pro 5G device. So, clearing unnecessary data is very important to keep the application run smoothly. To do this, you need to follow the below steps.

Step 1 – Firstly, go to “Settings” on your device.

Step 2 – Now, navigate to the “Apps” option available at the settings menu.

Step 3 – Here you can find the “Google Play Store” app listed. Open it by tapping.

Step 4 – Now, you can find a screen like below. Tap on “Clear cache” to remove all the cache from the application.

Tap on “Clear cache”

Now, again try to open Google Play Store and you may successfully overcome the Play Store not working issue. If not, check the next solution.

3. Reset Play store by Clear data

If the above solution is not working for you, you might try this option instead. This step will erase all the app data, settings, etc so that it can be set up a fresh one. This will also fix the Google Play store not working issue. For this solution, use the following method step by step.

Step 1 – Like the previous method, head towards the settings and then find “Apps”

Step 2 – Now find “Google Play Store” and open it.

Step 3 – Now, instead of tapping “Clear cache”, tap on “Clear data”. This will erase all the data and settings from the Google Play store.

tap on “Clear data”

After this, open “Google Play Store” and now your problem might be solved now.

4. Reconnecting the Google account

Sometimes it may happen that removing and reconnecting your Google account may solve the Play Store not working issue. To do this, you need to follow the instructions below.

Step 1 – Go to the “Settings” and then find “Accounts”.

Step 2 – Upon opening the option, select “Google”. Now you can see your Gmail ID listed there. Tap on it.

select “Google”

Step 3 – Now click on the top right side three dots or “more” option. Here you can find the “Remove account” option. Select it to remove the Google Account from your Mobile.

“more”

Now, go back and try to open Google Play Store again. This should work now and enter your Google ID and password again to continue. If it’s still not working, move to the next solution.

5. Reinstall the latest version of Google Play Store

Google Play store can’t be uninstalled completed completely from your Realme Narzo 60 Pro 5G. But disabling and reinstalling its latest version can resolve the Play Store crashing issue. For doing this, just follow the below guide.

Step 1 – First of all, go to “Settings” and then move on to “Security”. Then find “Device administration” here.

Step 2 – Upon clicking on this option, you can find “Android device manager”. Uncheck this and disable.

find “Android device manager”

Step 3 – Now you can be able to uninstall Google play service by going into application manager.

uninstall Google play service

Step 4 – After that, try to open any app that requires Google Play store to open, and that will automatically guide you to install the Google Play service. Now install the updated version of the Google Play service.

After installing, your problem might be solved by now. If not, try the next solution.

6. Clear Google Service Framework Cache

Besides the Google Play store, this is important to keep healthy the Google Service Framework as well. The cache and unnecessary data should be removed from there also. Follow the steps below.

Step 1 – Go to settings and then tap on “Application Manager”

Step 2 – Here you can find “Google Service Framework”. Open it.

Step 3 – Now, tap on “Clear cache”. And you are done.

tap on “Clear cache”

Now go back and try to open Google Play store again. This might solve the Google Play Store has stopped the problem by now. If not, check the next solution.

### 7\. Disable the VPN

The VPN is a service to get all the media outside your geographic location. This is also used to install a country-specific app in another country. But sometimes it can create a problem with Play Store crashing.  So, this is recommended to try disabling the VPN.

Step 1 – Go to the settings of your device.

Step 2 – Under the “networks”, click on “More”.

Step 3 – Here you can find “VPN”.  Tap on it and turn it off.

find “VPN”

Now, again go back and try to open the Google Play Store. This may solve your problem now. If not, check the next solution.

8. Force stop Google Play Service

Google Play Store needs to be restart just like your PC. This is a really helpful and common trick to overcome the Play Store crashing issue on your Realme Narzo 60 Pro 5G. To do this, follow the below steps.

Step 1- Go to settings and then go to the “Application Manager”.

Step 2 – Now find “Google Play Store” and click on it.

Step 3 – Here click on “Force Stop”. This allows the Google Play Store to stop.

click on “Force Stop”

Now, try to open Google Play store again and this time the service is being restarted and might work properly. If not, try the next solution.

9. Try a Soft Reset of your device

This easy to use solution will remove all the unnecessary temporary files of your device, close all recent apps, and make it clean. This is just rebooting your device. It won’t delete any data from your device.

Step 1 – Long press the “Power” button on your device.

Step 2 – Now, click on ‘Reboot’ or ‘Restart’ option. Your device will restart in some time.

click on ‘Reboot’

After restarting, try to open the Google Play Store again and this time you should succeed. If any case, it’s not opening, try the last (but not the least) method by hard reset your Android.

10. Hard reset your device

If you have done with all of the above solutions and still Play Store crashing, and you are aggressive to get it, then only try this method. Using this method will delete all the data of your device. So take a backup of the whole. Follow the step by step instruction below.

Step 1 – Go to setting and find “backup and reset” there.

Step 2 – Click on it. And then Click on the “Factory data reset” option.

Step 3 – Now confirm your action and tap on the “Reset device”.

tap on “Reset device”

This will take a while to reset your device completely. After completion, start the Google Play Store and set up as a new device.

The above methods are the best 11 among all the solutions you can get for your Play Store not working on wifi or Play Store crashing error. Try one by one and you might get rid of this problem.

Guide: How To Unbrick a Bricked Realme Narzo 60 Pro 5G Phone

Realme Narzo 60 Pro 5G phones are super popular thanks to their excellent features and affordable prices. But being so popular means people try to customize them with custom software. If you’re not careful, you might have a “bricked” Realme Narzo 60 Pro 5G phone. It won’t work at all. It will be more like a brick than a smartphone.

Don’t worry, though. This guide is here to help. It will show you how to unbrick your phone step by step. You’ll learn to bring your phone back to life and make it work again. So, get started on fixing your bricked Realme Narzo 60 Pro 5G phone by reading this article.

destroyed system xiaomi phone

Part 1. Common Reasons Why Realme Narzo 60 Pro 5G Phones Get Bricked

A bricked phone might sound like a techy term, but it’s pretty simple – when your Realme Narzo 60 Pro 5G phone turns into a lifeless block that won’t do anything. In this section, you’ll learn all about why this happens, so you can avoid these issues and keep your phone alive as long as possible.

android logo head with broken glass

  • Trying to flash incompatible ROMs. Sometimes, people want their Realme Narzo 60 Pro 5G phones to run different software like a custom version of Android called a ROM. But if you use the correct ROM for your specific phone, it can mess things up nicely. Also, inexperience with ROM flashing can hard brickyour Realme Narzo 60 Pro 5G Be sure to follow guides and ask for community help online.
  • Rooting mishaps/failures.“Rooting” means giving your phone superpowers, but if you mess up, it can go wrong. Your phone might not boot up, leaving you with a brick. Like the previous bullet, follow guides carefully, especially if inexperienced.
  • Failed Firmware Updates. When your phone asks you to update its software, following the instructions carefully is essential. If you interrupt the process or something goes wrong, your phone could be bricked.

Now, you must know about soft and hard-bricking to learn how to diagnose your phone. Soft bricking is like a phone’s bad day – it might not start up. However, with the right help, you can fix it. Hard bricking is worse. It’s when your phone is a paperweight – it won’t turn on, respond, or do anything useful.

Part 2. Method 1: Use the Realme Narzo 60 Pro 5G Flash Tool

Say you’ve accidentally bricked your Realme Narzo 60 Pro 5G phone due to rooting or ROM flashing. You might feel scared, but imagine having a magic wand that can fix your bricked phone. That’s what the Realme Narzo 60 Pro 5G Flash Tool is –a dedicated Realme Narzo 60 Pro 5G unbricking tool. It lets you install or flash different software onto your phone, giving it a fresh start. Most of the time, a simple firmware flash will unbrick your Realme Narzo 60 Pro 5G.

The Realme Narzo 60 Pro 5G Flash Tool is a superhero for various situations. Here are some scenarios where it can save the day:

  • **Device Recovery.**If your phone is bricked or acting strange, the Flash Tool can help bring it back to life.
  • Firmware Updates. You can use it to install official updates released by Realme Narzo 60 Pro 5G, ensuring your phone runs smoothly.
  • **Device Customization.**Want a different look for your phone? The Flash Tool can help you install custom ROMs or themes.
  • **Bug Fixes.**Got pesky bugs or glitches? The Flash Tool can replace corrupted software to make your phone behave.
  • Performance Enhancement. If your phone feels sluggish, the Flash Tool can boost its speed by flashing a new OS.

How To Use the Realme Narzo 60 Pro 5G Flash Tool To Unbrick a Realme Narzo 60 Pro 5G Phone

Now that you know what the Realme Narzo 60 Pro 5G Flash Tool is all about, it’s time to learn how to use it. If you’ve bricked your Realme Narzo 60 Pro 5G phone, follow the steps below:

  • Step 1. Download the Realme Narzo 60 Pro 5G Flash Tool and the stock firmware of your device on your computer.
  • Step 2. Turn off your phone. Then, press and hold the Volume Down + Power Key simultaneously for 6-8 seconds. This will force your phone to enter the Fastboot mode.

xiaomi press hold buttons together

  • Step 3. Connect your phone to your computer using a cable when you see this screen flash.

xiaomi fastboot screen

  • Step 4. Using the Realme Narzo 60 Pro 5G Flash Tool, click Select. Then, locate the firmware files you downloaded earlier.

xiaomi flash tool browse for folder menu

  • Step 5. Click the refresh button until the flash tool recognizes your device. Then, click flash to replace the firmware. A text saying “success” should appear under the result column.

xiaomi flash tool success screen

Congratulations! Your phone should be up and working after following these steps.

Part 3. Method 2: Wondershare Dr.Fone

If you gave the Realme Narzo 60 Pro 5G Flash Tool a shot and your phone is still not cooperating, don’t lose hope. Sometimes, the magic touch needs a slight variation. That’s where Dr.Fone comes into play. This dedicated software can work wonders when fixing various phone problems. It can even help in cases of bricked Realme Narzo 60 Pro 5G phones involving software or firmware issues.

dr.fone wondershare

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

  • Fix your Android to normal, no skills required.
  • Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
  • The high success rate in resolving Android system issues.
  • Compatible with a wide range of Android devices and OS versions
  • User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

wondershare dr.fone interface

One of Dr.Fone’s most astonishing powers is its “System Repair” feature. This is where the real magic happens. If your Realme Narzo 60 Pro 5G phone is bricked, it can help repair the underlying software glitches that caused the issue. Moreover, Dr.Fone brings a toolbox of features to the table, making it more than just a one-trick pony. Here are its key features:

  • **Data Recovery:**If you’ve lost precious data, Dr.Fone can help recover it, even from a bricked phone.
  • **Data Transfer:**You can quickly move data between devices, even if one is unresponsive.
  • **System Backup & Restore:**Fone can help you create a backup of your phone’s system and restore it when needed.
  • **Unlocking Tools:**If you’re locked out of your phone, Dr.Fone can help you regain access.

How To Use Dr.Fone System Recovery Feature To Unbrick a Realme Narzo 60 Pro 5G Phone

Now that you know about Dr.Fone, it’s time to understand how to use it. Hopefully, it can save your bricked Realme Narzo 60 Pro 5G phone from its problems. Follow the steps below:

  • Step 1. DownloadDr.Fone from its official website , and launch it on your computer. After entering the Toolbox menu from the left panel, click System Repair. Make sure that your Realme Narzo 60 Pro 5G phone is connected.
  • Step 2. Select Android on the next screen.

wondershare dr.fone phone os chooser

  • Step 3. Initiate the Android System Repair by clicking Start.

wondershare dr.fone system repair start screen

  • Step 4. Confirm your device details. You can edit any details that might be wrong.

wondershare dr.fone device details confirmation

  • Step 5. Put your phone into Download mode. Follow the guidelines for phones with or without home buttons. Your phone will begin downloading the dedicated firmware.

wondershare dr.fone download mode tutorial

  • Step 6. After downloading the firmware, verify and proceed with the installation by clicking Fix Now. Confirm firmware installation by typing “000000” into the text box in the appearing window. Click Confirm afterward.

wondershare dr.fone initiate system repair

  • Step 7. After the process is finished, your phone should now be okay. Click Done.

wondershare dr.fone success screen

Part 4. Best Practices/Tips Before Unbricking Your Phone

Before diving into the unbricking process, you must arm yourself with some tips and precautions to ensure your recovery journey is as smooth as possible. Here’s what you need to know:

  • Backing Up Data: An Ounce of Prevention. Remember the golden rule: always back up your data before attempting any phone recovery. Unbricking might save your phone, but being safe is better than sorry.
  • **Authentic Tools and Software: Stay on the Safe Side.**Using genuine and trustworthy tools is crucial when unbricking your Realme Narzo 60 Pro 5G This applies especially to Dr.Fone, which you should only download from the official website. Additionally, when recovering your phone’s software, use authentic Realme Narzo 60 Pro 5G ROMs (the operating system’s files).
  • **Learning from Online Guides and Communities: Seek Guidance.**Navigating the unbricking process might seem daunting, but you’re not alone. There are many online guides, tutorials, and communities where people share their experiences and solutions.

Conclusion

So, there you have it – your guide to fixing a bricked Realme Narzo 60 Pro 5G phone. Remember, bricking happens when your phone stops working. You won’t be afraid when that happens, as you learned about the Realme Narzo 60 Pro 5G Flash Tool and Dr.Fone. They are your phone-saving superheroes that can unbrick even a hard-bricked Realme Narzo 60 Pro 5G phone.

As a parting reminder, always keep a tool ready for emergencies. For this, choose Dr.Fone. It’s a super tool for all your phone problems. Give it a shot and be confident with your phone wherever you go and whatever you do with it.

safe Download safe & secure

3,052,835 people have downloaded it


  • Title: How to Flash Dead Realme Narzo 60 Pro 5G Safely | Dr.fone
  • Author: Abel
  • Created at : 2024-07-14 06:08:43
  • Updated at : 2024-07-15 06:08:43
  • Link: https://fix-guide.techidaily.com/how-to-flash-dead-realme-narzo-60-pro-5g-safely-drfone-by-drfone-fix-android-problems-fix-android-problems/
  • License: This work is licensed under CC BY-NC-SA 4.0.
On this page
How to Flash Dead Realme Narzo 60 Pro 5G Safely | Dr.fone