How to Flash Dead Tecno Spark 20 Pro+ Safely

Fix malfunctioning Android to normal in one click.
Highest success rate to fix all Android issues.
Step-by-step guidance through the fixing process.
No skills required to operate this program.

A phone is considered to be dead when it becomes completely unresponsive and refuses to switch on. Similarly, an Android phone is said to be dead when it does not boot up. You may try to switch it on several times by pressing the power button but in vain. You will see no sign of the phone’s logo or anything like a welcome screen. The Android phone’s screen remains black and does not illuminate when you try to turn it on. Interestingly, even when you charge this dead device, it does not show that it is getting charged.

Many people regard this as a battery issue, and many think of it as a temporary software crash. Some users also seem to believe that this is because of a virus attack. However, if you are looking for ways that tell how to fix a dead Android phone, you must understand that a dead phone or device can be cured by flashing custom firmware safely. If you are keen to know how to flash a dead Android phone or how to flash dead Android phones using PC, here are ways to help you.

Given below are eight techniques to flash your Tecno Spark 20 Pro+ safely, depending upon which phone you are using. It may seem time-consuming and tedious, but we can assure you that it works. So, move ahead and read on to learn about flashing new firmware, your Tecno Spark 20 Pro+, MTK Android, and Tecno Spark 20 Pro+ safely.

safe & secure

Part 1: Can a Dead Phone Be Flashed?

Flashing a dead Android phone might be skeptical for many users who have been in such a situation. Although it is possible to flash a dead Android phone, it is essential to be aware of the reasons that lead you into such a situation. Before a remedy, diagnosing the problem is a necessity for retaining the Tecno Spark 20 Pro+ device.

From battery issues to physical damage to the Tecno Spark 20 Pro+ device, there can be many reasons your Tecno Spark 20 Pro+ died. The reasons for a dead Android phone are not restricted to these points. There can be software-related issues or firmware issues that might cause such havoc on your Android.

Part 2: How to flash Tecno Spark 20 Pro+ in one click

While you are worried about how to flash Tecno Spark 20 Pro+ instantly with a single click, Dr.Fone - System Repair (Android) swiftly makes its way with a galore of options for you. This amazing tool from Wondershare can fix a plethora of Android system issues such as crashing of apps, black screen of death, failed system update, etc. Moreover, it can also get your device out of boot loop, unresponsive bricked Android mobiles as well as stuck at the Tecno Spark 20 Pro+ logo.

Dr.Fone - System Repair (Android)

One-click solution to flash Tecno Spark 20 Pro+

The high success rate in fixing Tecno Spark 20 Pro+ Android devices.
All the latest Tecno Spark 20 Pro+ devices are supported by this software.
One-click operation of this tool helps you how to flash Tecno Spark 20 Pro+ easily.
Being very intuitive, it doesn’t need you to be tech-savvy to use this software.
It is one of its kind and the first one-click Android repair software on the market.

3981454 people have downloaded it

Step-by-step Tutorial

We are going to explain how to flash a dead Android phone using a PC using Dr.Fone - System Repair (Android)

Note: Before you understand how to flash Dead Android phone, take a backup of your data and then proceed to avoid any data loss.

Phase 1: Prepare your Tecno Spark 20 Pro+

Step 1: Once you have downloaded and installed Dr.Fone, launch it. From the main menu, tap on ‘System Repair’ and get your Tecno Spark 20 Pro+ connected to it.

Step 2: Click ‘Android Repair’ from the available options, and then press the ‘Start’ button to fix the Dead Android phone by flashing it.

Step 3: On the Tecno Spark 20 Pro+ device information screen, pick the appropriate device brand, name, model, and other details followed by tapping the ‘Next’ button.

Phase 2: Put the Android device in Download mode to start repair.

Step 1: It is essential to boot your Tecno Spark 20 Pro+ in Download mode before repairing.

If the Tecno Spark 20 Pro+ device has a ‘Home’ button: Turn it off and then hold down the ‘Volume Down’, ‘Home’, and ‘Power’ buttons altogether for 5-10 seconds. Un-hold all of them and hit the ‘Volume Up’ button for entering ‘Download’ mode.

In the absence of a ‘Home’ button: Switch off the Android device and hold the ‘Volume Down’, ‘Bixby’, and ‘Power’ buttons for 5 to 10 seconds, then release them. Hit the ‘Volume Up’ button for entering the ‘Download’ mode.

Step 2: Press the ‘Next’ button for initiating firmware download.

Step 3: Once the firmware gets downloaded and verified Dr.Fone - System Repair (Android) starts to flash your Dead Android phone. All the Android system issues will be fixed soon after.

safe & secure

Part 3: How to flash Tecno Spark 20 Pro+ dead phone with Odin?

In this segment, we will learn how to fix the dead Android phone, i.e., Tecno Spark 20 Pro+ phones using Odin software. Odin is software used internally by Tecno Spark 20 Pro+ to generally unblock devices and perform a more utility-based job, namely, flashing new firmware in place of the old one. There are different variants available, so choose the one which is supported by your Galaxy phone. Here is a step-by-step explanation of how to flash dead Android phone (Tecno Spark 20 Pro+) using Odin software.

Step 1: Install the driver software on the computer. You can find the best driver software for your device and PC on the official Tecno Spark 20 Pro+ website. You may also download Tecno Spark 20 Pro+ Kies on your PC. Once you have downloaded and installed the driver software, restart the PC.

Step 2: Now download suitable firmware for your device in the form of a zip folder that you can open and store on your desktop.

Make sure the file is .bin, .tar, or .tar.md5 only as these are the only file types recognized by Odin.

Step 3: In this step, download the latest version of Odin on your PC and move it to the desktop, and then right-click on the downloaded Odin file to select “Run as Administrator”.

Step 4: Now, boot your dead device to Download Mode by pressing the power, volume down, and home button together. When the phone vibrates, release the power button only.

Step 5: Gently press the volume up button, and you will see the Download Mode Screen.

Step 6: Now, you may use a USB to connect your Tecno Spark 20 Pro+ to the PC. Odin will recognize your device, and in the Odin window, you will see a message saying “Added”.

Step 7: In this step, find the tar.md5 file you downloaded by clicking on “PDA” or “AP” on the Odin window and then click “Start”.

Finally, once the flashing process is complete, your Tecno Spark 20 Pro+ phone will reboot and start normally, and you may see a “Pass” or “Reset” message on the Odin window on the PC.

Part 4: How to flash MTK Android dead phone with SP Flash tool?

SP Flash tool, also known as SmartPhone Flash tool is a popular freeware tool used to flash custom ROM or firmware in MTK Android phones. It is a very successful tool and is extremely easy to use.

Let us look at the steps given below to learn how to flash dead Android phones using PC with the help of the SP Flash tool.

Step 1: To start with, download and install the MTK driver on your PC and then download the ROM/firmware you wish to use for flashing purposes.

Step 2: Once done, you should download the SP Flash tool and extract it on your PC and move on to launch the Flash_tool.exe file to open the SP Flash tool window.

Step 3: Now, on the SP Flash tool window, click on “Download” and select “Scatter-loading”.

Step 4: The last step would be to locate the file downloaded by you and click “Open” and then finally, select “Download” on the SP Flash tool window.

After completing the above steps, connect your dead device to the PC with a USB cable and wait for it to get recognized. The flashing process will take a few minutes to finish and then you will see a green circle indicating “OK Download”.

That’s it! Now simply disconnect your phone and wait for it to reboot.

Part 5: How to flash Tecno Spark 20 Pro+ dead phone with the Phoenix tool?

Phoenix tool, better known as PhoenixSuit, is a tool similar to the SP False tool and Odin. It works very well with Tecno Spark 20 Pro+ and is the best answer to “How to fix dead Android phone?”, “How to flash dead Android phone using PC?”, etc.

Let’s look at the steps of flashing the Tecno Spark 20 Pro+ dead phone with the Phoenix tool.

First, download and install the Tecno Spark 20 Pro+ PC Suite driver on your PC. Then you will need to download the PhoenixSuit tool and then launch it.

Now, on the toolbar, click “Tools” and select “Data Package Download” from the drop-down list.

Then move to download the firmware for your dead Tecno Spark 20 Pro+ and save it in a new Folder. Once done, go back to the Phoenix tool window and click on “File” and select “Open Product”.

Simply, feed in the details and then click “OK”.

After this, click on “Flashing” and select “Firmware update” and then browse to select the appropriate product code and then click “OK” again.

Then move on to select “Dead Phone USB Flashing” from the Firmware Update Box.

Lastly, just click on “Refurbish” and connect your phone to the PC using a USB cable.

That was it, the flashing process may take up to a few minutes after which your dead Tecno Spark 20 Pro+ will restart automatically.

Part 6: How to flash a dead phone that won’t turn on via factory reset?

Using tools for flashing Android devices can be a solution; however, it is heavily restricted to the Tecno Spark 20 Pro+ device models. For a generalized solution, there can be other options that you can go with. Factory resetting an Android device by putting it in Recovery Mode is one way. To know how to flash a dead Android phone using factory reset, go through the steps featured below:

Step 1: To initiate the process, you will have to put your Tecno Spark 20 Pro+ in Recovery Mode. Generally, Android phones are put in Recovery Mode by holding the “Power” and “Volume Up” keys for a few seconds after turning them off. The key combinations can vary according to your Tecno Spark 20 Pro+.

Step 2: As the Android boot menu opens on your screen, use the “Volume Down” and “Volume Up” keys to scroll up and down the menu. On accessing the “Wipe Data/Factory Reset” option, use the “Power” key to select the particular option.

Step 3: Continue to select the “Yes” option for confirming the factory reset of the Android device. The phone will automatically reboot after successfully factory resetting.

Part 7: How to flash a dead Android phone by checking screen faulty

The screen of your Tecno Spark 20 Pro+ may be faulty, due to which it is not launching. While seeking the right way of how to fix a dead Android phone, you can force restart your phone using the Volume buttons according to your device model.

If the Android vibrates on restarting and the screen does not lighten up, the problem can be directed to a hardware fault. The screen is broken and needs physical assistance to resolve the issue.

Part 8: How to fix a dead Android phone by changing the battery

Another solution that can help you fix the dead Android phone is changing its battery. The battery of an Android device can last up to 3 years. When its capacity drops to a bare minimum, it is best to change the battery of your Android. Upon trying to restart your Tecno Spark 20 Pro+, if it does not, you might need to replace your battery. All Android phone batteries are removable, which should be regulated with proper supervision.

Part 9: How to repair dead Android phone by contacting official support

If you are unable to discover any proper solution for how to flash dead Android phones, you might have to consult the respective customer support of the Android phone manufacturers. Consult customer support to discover why the phone is dead and how it can be flashed. The respective personnel will assist you in resolving the issue, which might require monetary input from your side.

Conclusion

A dead Android phone might be the cause of worry, but the techniques given above to flash your dead Android device safely are very helpful. These methods have been tried and tested by users all over the world and thus, we recommend them to you. If your phone is dead or has become unresponsive, do not panic. Depending on your phone’s brand, here are ways to guide you on how to fix the dead Android phone and how to flash dead Android phone using PC.

It has been observed that Wondershare Dr.Fone – System Repair (Android) assists in the best way. Resolve all your concerns involving your dead Android phone and flash it to make it operable again.

Carefully follow the instructions given, and you will be able to reboot your dead Android phone successfully.

Spotify Keeps Crashing: A Complete List of Fixes You Can Use on Tecno Spark 20 Pro+

Does your Spotify keep crashing? You’re not alone. This problem is widespread and can happen to anyone. Fortunately, there are ways to rectify it quickly and easily. We’ve prepared a guide to fixing your Spotify crashing problem.

In our guide, you’ll find out why your Spotify keeps crashing. Moreover, you’ll get a list of fixes for your Spotify closing problem and detailed instructions. Once you’ve read our guide, you’ll successfully solve the problem of Spotify crashing on Android.

Part 1. Why Spotify Keeps Crashing

Some people have encountered a problem with their Spotify accounts. Spotify can sometimes keep crashing and closing due to several reasons. For example, it can happen due to your phone not being compatible with the app. This can happen if your operating system isn’t updated to the newest version.

Another reason the Spotify app keeps crashing could be an antivirus or a VPN blocking Spotify from working. Moreover, your device might be out of storage space, causing your phone to slow down and crash apps.

Several other reasons for this problem include network issues, a weak Wi-Fi signal, or the battery saving mode. Furthermore, your apps and files might be corrupted, or an app on your phone might block Spotify from working correctly.

Part 2. Spotify Keeps Crashing: Best Fixes

As you can see, there are numerous reasons for your Spotify crashing. Fortunately, all of them are easy fixes, and there’s no need to worry. We’ve prepared a list of 11 ways to fix your Spotify. With these fixes and detailed instructions, you’ll be able to eliminate your Spotify problem with ease.

1. Fix the Spotify Closing Issue by Repairing Your System

The reason for your Spotify crashing may be more significant than just a bug. Your device system might be behind it. If that’s the case, you might need to repair your system before trying to fix Spotify.

If you want to repair your mobile device’s system quickly and efficiently, try Wondershare Dr.Fone.

Wondershare Dr.Fone is an app that gives you complete control over your phone. You can manage it, back it up, recover files, and repair your system. The system repair option will fix your Android in just a few clicks and allow you to use Spotify freely. The steps go as follows:

Step 1: Install and open Wondershare Dr.Fone on your computer and connect your Android.
Step 2: Go to the Toolbox section and select System Repair.

Step 3: Choose the Android

Step 4: See which Android errors Wondershare Dr.Fone can fix and click Start.

Step 5: Select the **Brand,**Name, Model, Country, and Carrier In the Carrier section, choose OPEN if your device is unlocked.

Step 6: Tick the “I agree with the warning, and I am ready to proceed”checkbox and click Next.
Step 7: Put your Android in Download Mode. You can find the steps below these instructions.
Step 8: The program will automatically download once you put the phone in Download Mode.

Step 9: Once the firmware downloads, click Fix Nowto install it on your Android.

Step 10: Type “000000” in the dialog box and click Confirm.

Step 11: That will start the system reparation, which you can follow on the screen.

Step 12: Once it finishes, click Doneto complete the system repair.

There are two ways to enter Download Mode: one for Android devices with the Home button and another for those without it.

The steps for entering Download Mode on an Android phone with the Home button are as follows:

Step 1: Turn off your phone.
Step 2: Press and hold the Volume Down,Home, and Power buttons simultaneously.
Step 3: Press the Volume Upbutton to enter Download Mode.

The steps for entering Download Mode on Android devices without the Home button are as follows:

Step 1: Turn off your phone.
Step 2: Press and hold the Volume Down, Bixby, andPower buttons simultaneously.
Step 3: Press the Volume Upbutton to enter Download Mode.

2. Force-Close the App

You can force-close Spotify and open it again to make it work properly. That is an easy fix if your Spotify has developed a bug. If that is the case, follow the next steps:

Step 1: Try opening Spotify.
Step 2: If it’s not working, open App Switcher or Recent Apps. Different Android devices open it differently. Thus, you can swipe up from your Home screen, or if you have three buttons at the bottom, press Recent Apps.

Step 3: Find Spotify in Recent Appsand click X or swipe up over it to force-close it.
Step 4: Try opening Spotify again.

The Spotify app may be working fine. Maybe you’re having problems with your Spotify account. If so, you can try logging out and logging in again to see if that works. That isn’t a big problem; sometimes Spotify accounts start bugging. You can re-login to your Spotify account by following these steps:

Step 1: Open Spotify.
Step 2: Tap Settingsin the upper right corner.

Step 3: Scroll to the bottom of the settings and tap Log Out.

Step 4: Tap Log In.

Step 5: Enter your login credentials.
Step 6: Tap Loginagain, and you’re in.

4. Restart Your Device

Another way to stop Spotify from crashing can be restarting your Android. The steps may vary slightly depending on the Tecno Spark 20 Pro+ device, but they’re mostly the same. Follow these steps to restart your device:

Step 1: Press and hold the Power button(you must press and hold both the Power and Volume Up buttons on a newer Android device).
Step 2: Tap Restart. That will restart your Android, and you can try opening Spotify again.

5. Set Up Your Time and Date

Another possible reason for your Spotify closing problem could be the incorrect time and date on your Android. That is also an easy fix; you must set it correctly and try opening the app again. Set up your time and date with these steps:

Step 1: Open Settingson your Android.
Step 2: Go to Systemor General Management (depending on your Android model).
Step 3: Go to Date and Time.
Step 4: Tap Set Dateand set the correct date.

Step 5: Go to Set Timeand set the right time.

6. Update Your System Software

Your Spotify app might keep crashing because your system is outdated. Try updating it to the latest version to try and fix the crashing problem. The steps for the Android system update are as follows:

Step 1: Open Settings.

Step 2: Go to System or About Phone.

Step 3: Select System Update.
Step 4: If there’s an available update, tap

7. Update Your App

If your system is updated, then Spotify might need an update. The app might malfunction if you’re using an older version. Thus, updating the app might solve the Spotify crashing problem. You can update Spotify by following these steps:

Step 1: Go to the Play Store.

Step 2: Search and open Spotify in the Play Store.
Step 3: Tap Update

8. Free up Storage

Spotify can start crashing if your Android’s storage space is at capacity. That can also cause other apps to crash, not only Spotify. Therefore, check the storage space and free up as much as possible. Follow these steps:

Step 1: Open
Step 2: Go to Device Maintenance > Storageor go directly to Storage.

Step 3: Here, you can see how much of your storage space is available and what’s taking up the most space.

Step 4: Then, you can go ahead and clear as much space as you can.

9. Reinstall Spotify

There’s another solution if the Spotify app keeps crashing. You can try uninstalling and reinstalling it again on your Android. That will reset the app and might solve your problem. Follow the next steps to reinstall Spotify:

Step 1: Find the Spotify app on your Android.
Step 2: Hold the app icon.
Step 3: Then, press Uninstall.

Step 4: Press OK.
Step 5: Then, open the PlayStore and find Spotify.
Step 6: Tap Installto reinstall the app again.

Step 7: Once it installs, log in to test if it’s working.

10. Check if Spotify Is Down

If your Spotify keeps crashing and closing, it might not be your device’s problem. Sometimes, Spotify’s server can be down, and many people face the same issue. If that’s the case, you can check with your friends if their Spotify is working or check online if Spotify is down. To do that, follow these steps:

Step 1: Open your web browser.
Step 2: Type “Is Spotify down” in the search bar.

Step 3: You’ll see several websites that check real-time app servers and if they’re down.

Step 4: Go to one or two and see what they say. If Spotify is down, you’ll need to wait for them to fix the problem.

11. Clear the Cache

When using different apps and websites, your device caches data from those sources. Since there’s no need to pile up your Spotify cache, you can clear it. Follow these steps:

Step 1: Open Settings.

Step 2: Go to Apps.
Step 3: Find Spotify and tap it.

Step 4: Tap Storageor Storage usage.

Step 5: Tap Clear Cache.

safe & secure

Conclusion

If your Spotify app keeps crashing, several reasons might be behind it. For instance, your storage space might be at capacity, your system might need an update, your phone might have a software bug, or the Spotify server might be down.

We’ve given you 11 solutions to fix the Spotify crashing problem. However, if your system needs repairing, you can try Wondershare Dr.Fone for quick and easy repair. This solution and all others will surely help you fix the crashing problem.

Fixes for Apps Keep Crashing on Tecno Spark 20 Pro+

The rapid evolution of technology has transformed our smartphones into powerful devices. Presently, with just a few taps, they possess the ability to accomplish a diverse array of tasks. It has been possible due to the extensive availability of mobile applications. However, it can be incredibly frustrating when your favorite apps keep crashing repeatedly.

You’re not alone if you’re an Android user who encounters app crashes. This article will explore ten practical ways to fix apps that keep crashing on Android devices. We will also discuss the causes behind app crashes and how to prevent them.

Part 1: What Are the Causes Behind Apps Keep Crashing on Android?

There are many reasons for the app crashing on Android devices. These reasons range from insufficient storage space to bugs and glitches in the apps. Finding out the root cause of an app crashing is important so that you can find the appropriate solution. Discussed below are some of the reasons why your Android apps keep crashing:

Insufficient Memory

When a device is low on memory, it may struggle to run multiple apps simultaneously. Each app requires memory to store its data and execute its processes. If the available memory is limited, it can cause apps to crash. That happens because they don’t have enough resources to operate properly.

Software Compatibility

Android devices come in various models and run different operating system versions. That’s why it is essential to use apps compatible with your device. Since there are a lot of Android variants, it is hard to optimize apps for all devices. An app not optimized for an Android version or device leads to crashes or malfunctions.

Outdated Apps

Apps are regularly updated to introduce new features, fix bugs, and enhance performance. Using an outdated version of an app may cause instability or compatibility problems. Since the app is not optimized for the current version of Android, it can keep crashing.

Network Problems

Some apps rely heavily on network connectivity to function properly. They need a stable and strong internet connection to perform all the functions. These apps can crash if there are network connectivity issues, such as a weak Wi-Fi or network outage. Unstable connections can disrupt data transmission, making the app’s function challenging.

App Bugs

Despite rigorous testing, apps can still have bugs or coding errors that lead to crashes. Bugs in apps can occur due to various reasons. It mostly relates to incorrect implementation of features or unexpected user interactions. App developers work to identify and fix these bugs, often releasing updates.

Part 2: How to Fix the Apps Keep Crashing on Android?

Once you discover why your Android apps keep crashing, fixing them becomes a lot easier. However, there is no need to worry even if you cannot locate the problem source. Below we have listed 10 general and specialized solutions to fix app crashing:

Fix 1: Check the Internet Connection

As mentioned before, some apps rely on the internet to function. If you don’t have an active internet connection, they will not work. To avoid the app crashing, you need to ensure that the internet connection on your device is working. If you use Wi-Fi, check the router and turn Wi-Fi off and on again. In the case of mobile data, try enabling Airplane mode and then disabling it.

Fix 2: Force Stop the Apps Keep Crashing

If your apps keep crashing, you should try force-closing the targeted app and re-opening it. Doing this will flush out minor bugs and glitches from the app. These temporary bugs and glitches can occur due to various reasons and hamper the app’s working. Use the following steps to force stop the app that keeps crashing and re-open it:

Step 1: On your Tecno Spark 20 Pro+, move the app icon and press it to select “App Info.” On the App Info screen, tap the “Force Stop” button to force close the app. The button can be either on the down left or down right corner.

Step 2: After force closing the app, relaunch it and see if the app crashing issue is resolved.

Fix 3: Restart your Android Device

In case restarting the app hasn’t worked, you should try restarting your Tecno Spark 20 Pro+. Rebooting your device reset all the processes and apps in the Tecno Spark 20 Pro+ device. It helps remove conflicts between different apps, which can be the cause of your apps keep crashing on Android. To reboot your Tecno Spark 20 Pro+, adhere to the following guidelines:

Step: Press and hold the “Power” key until you see the power menu on the screen. Here, tap the “Restart/Reboot” button to restart your Tecno Spark 20 Pro+.

Fix 4: Update the Android OS

Not updating your Android OS for a long while can cause many performance issues in your device. One of these issues is the incompatibility with the latest apps. That’s why make sure that your Tecno Spark 20 Pro+ is running the latest available version of the operating system. You can check and update the Android OS of your device using these steps:

Step 1: Launch the Settings app on your Tecno Spark 20 Pro+ and scroll down to select “Software Update.” On the next screen, tap “Download and Install” to look for new updates.

Step 2: During the update process, ensure you have a stable internet connection. Moreover, your device should be fully charged to avoid any complications.

Fix 5: Clear the App Cache

Have you tried clearing the cache of the app that keeps crashing? The app cache consists of temporary files and data that are stored to enhance app performance. However, if the app cache becomes corrupted, it can cause crashes. In such a situation, clearing the app cache can help resolve the app crashing issue. To clear the app cache on your Tecno Spark 20 Pro+, follow these steps:

Step 1: Navigate to your targeted app icon and long-press it. Now, tap “App Info” from the pop-up menu to access app information.

Step 2: Following this, press “Storage,” and on the following screen, hit “Clear Cache.” It will clean the cache for the targeted app.

Fix 6: Reinstall the Buggy App

Bugs in the app can prove a nightmare and hard to remove from the app. If your apps keep crashing due to bugs, it is best to uninstall and then reinstall the app. It will help you eliminate any corrupted files or settings that might be causing the crashes. Given below are the steps needed to uninstall and reinstall the apps on Android device:

Step 1: Go to the problematic app on your device and press the app icon for a while. Select “Uninstall” and remove the app by pressing “OK.”

Step 2: After removing the app, go to Google Play Store and find the targeted app. Here, tap “Install” to reinstall the app on your device.

Fix 7: Check the App Permissions

Sometimes, app crashes can occur due to improper or conflicting permissions. Whenever you install an app on your device, it needs related permission to function. If you have not granted the required permissions, the apps will not function, leading to apps keep crashing on Android. You can check the app permissions using the following procedure:

Step 1: You will need to launch Settings on your Tecno Spark 20 Pro+ and tap “Apps.” Here find and select the targeted app to open App Info.

Step 2: On the App Info screen, press “Permissions” to access all permission settings. Here, ensure that your app has the required permissions.

Fix 8: Check and Clear the Phone Storage

Insufficient storage space on your device can also lead to app crashes. Check the available storage space on your Tecno Spark 20 Pro+ and ensure it has enough free space. If the storage is full, consider deleting unnecessary files or apps to create more space. Explained below is the process to check and free up storage on Android devices:

Step 1: Open Settings on your Tecno Spark 20 Pro+ and scroll down to find and select “Battery and Device Care.” Here, tap “Storage” to view the Tecno Spark 20 Pro+ device storage.

Step 2: Here, you will see detailed information about everything stored on your device. If the storage space is full, remove the unnecessary data.

Fix 9: Reboot Into Safe Mode

It can be hard to find the app crashing root cause if it happens due to conflicts between different apps. In such scenarios, the best way to find the problematic apps is to use Safe Mode on your device. Safe Mode disables all third-party apps, allowing you to determine if the crashes are caused by a specific app. Follow the process given below to reboot your device into Safe Mode:

Step 1: Press and hold the “Volume Down” and “Power” buttons together for 3 seconds to access the power menu. Here, long-press the “Power Off” option.

Step 2: Press the “Power Off” button until “Restart in Safe Mode” appears on the screen. Now reboot the Tecno Spark 20 Pro+ device into Safe Mode. To exit Safe Mode, you will need to restart the phone.

Fix 10: 100% Working Solution to Fix the Android Apps Keep Crashing – Wondershare Dr.Fone

Trying to fix an app crashing with multiple methods can be a tiring and frustrating experience. That’s why the best option is always to find and use a specialized Android system repair tool. The best Android repair tool currently available is Wondershare Dr.Fone. It is a comprehensive system repairing tool that can fix almost all system issues in Android devices.

Using Wondershare Dr.Fone, you can fix issues like apps crashing, black screen of death, Play Store not working, and many more. Furthermore, you do not need any technical skills to use Wondershare Dr.Fone to repair your Android system issues.

Main Features of Wondershare Dr.Fone

Wondershare Dr.Fone is a specialized tool for fixing problems with Tecno Spark 20 Pro+ devices, including the latest Tecno Spark 20 Pro+ phones.
It supports the Android system repair feature for over 1000 Android phones across the spectrum.
With this tool, you can also fix bricked Android devices with ease.

Step to Fix the Android Apps Keep Crashing via Wondershare Dr.Fone

The process of fixing apps that keeps crashing on Android devices is straightforward when using Wondershare Dr.Fone. Here are the simple steps you need to follow to fix the app crashing:

Step 1: Access System Repair from Toolbox

Open Wondershare Dr.Fone on your system after installation and select “System Repair” from the “Toolbox.” Now connect your Tecno Spark 20 Pro+ using a USB cable and select “Android” in Wondershare Dr.Fone.

Step 2: Provide Your Android Device Information

Click “Start” to initiate the repair process and provide your device information. You will need to provide device details like Brand, Name, Model, Country, and Carrier. Now, check the “I agree with the warning, and I am ready to proceed” box and tap “Next.”

Step 3: Repair the Apps Keeps Crashing on Android

Follow the on-screen instruction to activate Download Mode on your device. Wondershare Dr.Fone will download the related firmware once you have enabled Download Mode. Afterward, click “Fix Now” and confirm your action by inserting the “000000” code. Now, wait for the repair process to finish.

safe & secure

Conclusion

To sum up, if your apps keep crashing on Android, you can resolve it in many ways. Using the fixes given in this article, you can improve apps’ performance and reduce crashes. However, if you’re looking for a reliable and convenient solution, we highly recommend Wondershare Dr.Fone.

With its clean interface and powerful features, Wondershare Dr.Fone stands out as the best choice to fix app crashes. It provides a comprehensive toolkit to diagnose and resolve various software issues.

Fix Guide

How to Flash Dead Tecno Spark 20 Pro+ Safely | Dr.fone