How to Flash Dead Xiaomi Redmi Note 12 5G Safely

• Fix malfunctioning Android to normal in one click.
• Highest success rate to fix all Android issues.
• Step-by-step guidance through the fixing process.
• No skills required to operate this program.

A phone is considered to be dead when it becomes completely unresponsive and refuses to switch on. Similarly, an Android phone is said to be dead when it does not boot up. You may try to switch it on several times by pressing the power button but in vain. You will see no sign of the phone’s logo or anything like a welcome screen. The Android phone’s screen remains black and does not illuminate when you try to turn it on. Interestingly, even when you charge this dead device, it does not show that it is getting charged.

Many people regard this as a battery issue, and many think of it as a temporary software crash. Some users also seem to believe that this is because of a virus attack. However, if you are looking for ways that tell how to fix a dead Android phone, you must understand that a dead phone or device can be cured by flashing custom firmware safely. If you are keen to know how to flash a dead Android phone or how to flash dead Android phones using PC, here are ways to help you.

Given below are eight techniques to flash your Xiaomi Redmi Note 12 5G safely, depending upon which phone you are using. It may seem time-consuming and tedious, but we can assure you that it works. So, move ahead and read on to learn about flashing new firmware, your Xiaomi Redmi Note 12 5G, MTK Android, and Xiaomi Redmi Note 12 5G safely.

safe & secure

Part 1: Can a Dead Phone Be Flashed?

Flashing a dead Android phone might be skeptical for many users who have been in such a situation. Although it is possible to flash a dead Android phone, it is essential to be aware of the reasons that lead you into such a situation. Before a remedy, diagnosing the problem is a necessity for retaining the Xiaomi Redmi Note 12 5G device.

From battery issues to physical damage to the Xiaomi Redmi Note 12 5G device, there can be many reasons your Xiaomi Redmi Note 12 5G died. The reasons for a dead Android phone are not restricted to these points. There can be software-related issues or firmware issues that might cause such havoc on your Android.

Part 2: How to flash Xiaomi Redmi Note 12 5G in one click

While you are worried about how to flash Xiaomi Redmi Note 12 5G instantly with a single click, Dr.Fone - System Repair (Android) swiftly makes its way with a galore of options for you. This amazing tool from Wondershare can fix a plethora of Android system issues such as crashing of apps, black screen of death, failed system update, etc. Moreover, it can also get your device out of boot loop, unresponsive bricked Android mobiles as well as stuck at the Xiaomi Redmi Note 12 5G logo.

Dr.Fone - System Repair (Android)

One-click solution to flash Xiaomi Redmi Note 12 5G

• The high success rate in fixing Xiaomi Redmi Note 12 5G Android devices.
• All the latest Xiaomi Redmi Note 12 5G devices are supported by this software.
• One-click operation of this tool helps you how to flash Xiaomi Redmi Note 12 5G easily.
• Being very intuitive, it doesn’t need you to be tech-savvy to use this software.
• It is one of its kind and the first one-click Android repair software on the market.

3981454 people have downloaded it

Step-by-step Tutorial

We are going to explain how to flash a dead Android phone using a PC using Dr.Fone - System Repair (Android)

Note: Before you understand how to flash Dead Android phone, take a backup of your data and then proceed to avoid any data loss.

Phase 1: Prepare your Xiaomi Redmi Note 12 5G

Step 1: Once you have downloaded and installed Dr.Fone, launch it. From the main menu, tap on ‘System Repair’ and get your Xiaomi Redmi Note 12 5G connected to it.

Step 2: Click ‘Android Repair’ from the available options, and then press the ‘Start’ button to fix the Dead Android phone by flashing it.

Step 3: On the Xiaomi Redmi Note 12 5G device information screen, pick the appropriate device brand, name, model, and other details followed by tapping the ‘Next’ button.

Phase 2: Put the Android device in Download mode to start repair.

Step 1: It is essential to boot your Xiaomi Redmi Note 12 5G in Download mode before repairing.

• If the Xiaomi Redmi Note 12 5G device has a ‘Home’ button: Turn it off and then hold down the ‘Volume Down’, ‘Home’, and ‘Power’ buttons altogether for 5-10 seconds. Un-hold all of them and hit the ‘Volume Up’ button for entering ‘Download’ mode.

Parental Control Software

#1 Rated Parental Control Software.
Monitor & Control all PC Activity!
sentrypc.com/parental-controls/ 

• In the absence of a ‘Home’ button: Switch off the Android device and hold the ‘Volume Down’, ‘Bixby’, and ‘Power’ buttons for 5 to 10 seconds, then release them. Hit the ‘Volume Up’ button for entering the ‘Download’ mode.

Step 2: Press the ‘Next’ button for initiating firmware download.

Step 3: Once the firmware gets downloaded and verified Dr.Fone - System Repair (Android) starts to flash your Dead Android phone. All the Android system issues will be fixed soon after.

safe & secure

Part 3: How to flash Xiaomi Redmi Note 12 5G dead phone with Odin?

In this segment, we will learn how to fix the dead Android phone, i.e., Xiaomi Redmi Note 12 5G phones using Odin software. Odin is software used internally by Xiaomi Redmi Note 12 5G to generally unblock devices and perform a more utility-based job, namely, flashing new firmware in place of the old one. There are different variants available, so choose the one which is supported by your Galaxy phone. Here is a step-by-step explanation of how to flash dead Android phone (Xiaomi Redmi Note 12 5G) using Odin software.

Step 1: Install the driver software on the computer. You can find the best driver software for your device and PC on the official Xiaomi Redmi Note 12 5G website. You may also download Xiaomi Redmi Note 12 5G Kies on your PC. Once you have downloaded and installed the driver software, restart the PC.

Step 2: Now download suitable firmware for your device in the form of a zip folder that you can open and store on your desktop.

Make sure the file is .bin, .tar, or .tar.md5 only as these are the only file types recognized by Odin.

Step 3: In this step, download the latest version of Odin on your PC and move it to the desktop, and then right-click on the downloaded Odin file to select “Run as Administrator”.

Step 4: Now, boot your dead device to Download Mode by pressing the power, volume down, and home button together. When the phone vibrates, release the power button only.

Step 5: Gently press the volume up button, and you will see the Download Mode Screen.

Step 6: Now, you may use a USB to connect your Xiaomi Redmi Note 12 5G to the PC. Odin will recognize your device, and in the Odin window, you will see a message saying “Added”.

Step 7: In this step, find the tar.md5 file you downloaded by clicking on “PDA” or “AP” on the Odin window and then click “Start”.

Finally, once the flashing process is complete, your Xiaomi Redmi Note 12 5G phone will reboot and start normally, and you may see a “Pass” or “Reset” message on the Odin window on the PC.

Part 4: How to flash MTK Android dead phone with SP Flash tool?

SP Flash tool, also known as SmartPhone Flash tool is a popular freeware tool used to flash custom ROM or firmware in MTK Android phones. It is a very successful tool and is extremely easy to use.

Let us look at the steps given below to learn how to flash dead Android phones using PC with the help of the SP Flash tool.

Step 1: To start with, download and install the MTK driver on your PC and then download the ROM/firmware you wish to use for flashing purposes.

Step 2: Once done, you should download the SP Flash tool and extract it on your PC and move on to launch the Flash_tool.exe file to open the SP Flash tool window.

Step 3: Now, on the SP Flash tool window, click on “Download” and select “Scatter-loading”.

Step 4: The last step would be to locate the file downloaded by you and click “Open” and then finally, select “Download” on the SP Flash tool window.

After completing the above steps, connect your dead device to the PC with a USB cable and wait for it to get recognized. The flashing process will take a few minutes to finish and then you will see a green circle indicating “OK Download”.

That’s it! Now simply disconnect your phone and wait for it to reboot.

Part 5: How to flash Xiaomi Redmi Note 12 5G dead phone with the Phoenix tool?

Phoenix tool, better known as PhoenixSuit, is a tool similar to the SP False tool and Odin. It works very well with Xiaomi Redmi Note 12 5G and is the best answer to “How to fix dead Android phone?”, “How to flash dead Android phone using PC?”, etc.

Let’s look at the steps of flashing the Xiaomi Redmi Note 12 5G dead phone with the Phoenix tool.

First, download and install the Xiaomi Redmi Note 12 5G PC Suite driver on your PC. Then you will need to download the PhoenixSuit tool and then launch it.

Now, on the toolbar, click “Tools” and select “Data Package Download” from the drop-down list.

Then move to download the firmware for your dead Xiaomi Redmi Note 12 5G and save it in a new Folder. Once done, go back to the Phoenix tool window and click on “File” and select “Open Product”.

Simply, feed in the details and then click “OK”.

After this, click on “Flashing” and select “Firmware update” and then browse to select the appropriate product code and then click “OK” again.

Then move on to select “Dead Phone USB Flashing” from the Firmware Update Box.

Lastly, just click on “Refurbish” and connect your phone to the PC using a USB cable.

That was it, the flashing process may take up to a few minutes after which your dead Xiaomi Redmi Note 12 5G will restart automatically.

Part 6: How to flash a dead phone that won’t turn on via factory reset?

Using tools for flashing Android devices can be a solution; however, it is heavily restricted to the Xiaomi Redmi Note 12 5G device models. For a generalized solution, there can be other options that you can go with. Factory resetting an Android device by putting it in Recovery Mode is one way. To know how to flash a dead Android phone using factory reset, go through the steps featured below:

Step 1: To initiate the process, you will have to put your Xiaomi Redmi Note 12 5G in Recovery Mode. Generally, Android phones are put in Recovery Mode by holding the “Power” and “Volume Up” keys for a few seconds after turning them off. The key combinations can vary according to your Xiaomi Redmi Note 12 5G.

Step 2: As the Android boot menu opens on your screen, use the “Volume Down” and “Volume Up” keys to scroll up and down the menu. On accessing the “Wipe Data/Factory Reset” option, use the “Power” key to select the particular option.

Step 3: Continue to select the “Yes” option for confirming the factory reset of the Android device. The phone will automatically reboot after successfully factory resetting.

Part 7: How to flash a dead Android phone by checking screen faulty

The screen of your Xiaomi Redmi Note 12 5G may be faulty, due to which it is not launching. While seeking the right way of how to fix a dead Android phone, you can force restart your phone using the Volume buttons according to your device model.

If the Android vibrates on restarting and the screen does not lighten up, the problem can be directed to a hardware fault. The screen is broken and needs physical assistance to resolve the issue.

Part 8: How to fix a dead Android phone by changing the battery

Another solution that can help you fix the dead Android phone is changing its battery. The battery of an Android device can last up to 3 years. When its capacity drops to a bare minimum, it is best to change the battery of your Android. Upon trying to restart your Xiaomi Redmi Note 12 5G, if it does not, you might need to replace your battery. All Android phone batteries are removable, which should be regulated with proper supervision.

Part 9: How to repair dead Android phone by contacting official support

If you are unable to discover any proper solution for how to flash dead Android phones, you might have to consult the respective customer support of the Android phone manufacturers. Consult customer support to discover why the phone is dead and how it can be flashed. The respective personnel will assist you in resolving the issue, which might require monetary input from your side.

Conclusion

A dead Android phone might be the cause of worry, but the techniques given above to flash your dead Android device safely are very helpful. These methods have been tried and tested by users all over the world and thus, we recommend them to you. If your phone is dead or has become unresponsive, do not panic. Depending on your phone’s brand, here are ways to guide you on how to fix the dead Android phone and how to flash dead Android phone using PC.

It has been observed that Wondershare Dr.Fone – System Repair (Android) assists in the best way. Resolve all your concerns involving your dead Android phone and flash it to make it operable again.

Carefully follow the instructions given, and you will be able to reboot your dead Android phone successfully.

Stuck at Android System Recovery Of Xiaomi Redmi Note 12 5G ? Fix It Easily

In this article, you will learn what is Android system recovery, and how to fix Android stuck at system recovery step by step. To get out of Android system recovery more easily, you need this Android repair tool.

You know your Xiaomi Redmi Note 12 5G is stuck in recovery mode when you cannot turn on the Xiaomi Redmi Note 12 5G device. If you try to turn it on, it shows a message that says, “Android System Recover.” This situation can be quite debilitating for most Android users. Most of the time, you don’t know whether you have lost all of your important Android data. It is even more worrying because of the fact that you cannot turn on your device at all, especially when you don’t know how to fix it.

Part 1. What is Android System Recovery?

Despite all the worry that surrounds an unwanted Android system recovery screen, it is actually a feature that can be quite helpful to your Xiaomi Redmi Note 12 5G when it’s needed. It can be useful when you want to hard reset the Android device without having to access the settings. This can be very useful if your device is not working very well or if your touch screen is experiencing problems. It can also be very helpful when you are having a problem accessing the settings on your device.

For these reasons, it is actually a good thing, although when it does happen unexpectedly, you may want to know how to fix it.

Part 2. How to get to Android System recovery

Now that you know how useful the Android System can be, you may want to know how to utilize this feature to get out of some of the problems we mentioned above. Here’s how you can safely get to the Android recovery system on your Xiaomi Redmi Note 12 5G.

Step 1: Hold down the power key and then select “Power Off” from the options on the screen. If, however, your screen is unresponsive, keep holding the power key for several seconds until the Xiaomi Redmi Note 12 5G device is completely turned off.

Step 2: Next, you need to hold down the Power and the Volume Key. You should able to see the Android image and a bunch of information about your device. There should also be a “Start” at the top right corner of the screen.

Step 3: Press the Volume up and Volume down keys and use the Power key to select menu options. Press the Volume down key twice to see “Recovery Mode” in red at the top of the screen. Press the Power key to select it.

Step 4: The white Google logo will appear immediately followed by the Android logo again as well as the words “No Command” at the bottom of the screen.

Step 5: Finally, press and hold both the Power and the Volume up Key for around 3 seconds and then let go of the Volume up Key but keep holding the Power Key. You should see the Android system recovery options at the top of the screen. Use the Volume keys to highlight and the Power key to select the one you want.

Part 3. Android Stuck at System Recovery? How to fix in one click?

Sometimes during the System Recovery process, the process can glitch, and you’ll lose data on your device, rendering it unusable. However, another solution to fix this is to repair your device using the Dr.Fone - System Repair tool.

Dr.Fone - System Repair (Android)

One-stop solution to fix Android stuck at System recovery

• It’s the #1 software for PC-based Android repair
• It’s easy to use with no technical experience required
• Supports all latest Xiaomi Redmi Note 12 5G devices
• Easy, one-click fix Android stuck at system recovery

3981454 people have downloaded it

Here’s a step by step guide on how to use it yourself;

Note: Be aware that this process can erase all your personal files on your device, so ensure you’ve backed up your Xiaomi Redmi Note 12 5G before continuing.

Step #1 Head over to the Dr.Fone website and download the software for your Windows computer.

Once installed on your computer, open onto the main menu and connect your Xiaomi Redmi Note 12 5G using the official USB cable. Select the System Repair option.

Step #2 Select the ‘Android Repair’ option from the next screen.

Insert your device information, including the brand, carrier details, model and country and region you’re in to ensure you’re downloading the correct firmware.

Step #3 Follow the onscreen instructions on how to put your device in Download Mode.

Your device should already be in this mode but follow the instructions to make sure. There are methods available for devices, both with and without home buttons.

Step #4 The firmware will now start downloading. You’ll be able to track this process in the window.

Ensure your device, and your computer stays connected the entire time, and make sure your internet connection remains stable.

After downloading, the software will automatically start to repair your device by installing the firmware. Again, you can track the progress of this on the screen, and you’ll need to ensure your device remains connected throughout.

You’ll be notified when the operation is complete and when you’re able to disconnect your phone and use it as normal, free from it being stuck on the Android system recovery screen!

Part 4. Android Stuck at System Recovery? How to fix in a common way?

If, however, your device is stuck on system recovery mode, here’s how you can easily get it out of system recovery. The process is slightly different for different Android devices, so you should check your device’s manual before attempting this process.

Step 1: Power off the Xiaomi Redmi Note 12 5G device, and just to be sure, take out the battery to ensure that the Xiaomi Redmi Note 12 5G device is fully turned off. Then reinsert the battery.

Step 2: Press and hold down the Home button, Power Button, and the Volume up Key simultaneously until the Xiaomi Redmi Note 12 5G device vibrates.

Step 3: Once you feel the vibration, release the power button but continue to hold down the Home and Volume up Key. The Android recovery screen will display. Release the Volume up and Home buttons.

Step 4: Press the Volume down key to select the “Wipe Data/ Factory Reset option and then press the Power button to select it.

Step 5: Next, you need to press the Volume down button to highlight “Delete All User Data” and then press the Power button to select it. The device will reset and present the “Reboot System Now” option.

Step 6: Finally, press the Power button to reboot the phone in normal mode.

Part 5. Backup and Restore Android System

Losing data on your Xiaomi Redmi Note 12 5G is a common occurrence, and since Android devices don’t really have an automatic full backup solution, it is important to know how to backup and restore your device system. Here’s how to easily do that.

Step 1: Enter the recovery mode on your Xiaomi Redmi Note 12 5G, as described in Part 2 above. Use the Volume and Power keys to select the “Backup & Restore” option on the screen.

Step 2: Tap on the backup option or use the Volume and Power keys if your screen is unresponsive. This will begin backing up your system to the SD card.

Step 3: After the process is complete, choose “Reboot” to restart the Xiaomi Redmi Note 12 5G device.

Step 4: You can then simply check Recovery > backup directory on your SD card. You can rename it to easily find it later during the restore process.

To restore the system from the backup created, follow these simple steps.

Step 1: Once again, enter recovery mode as described in part 2 above and then choose Backup & Restore from the menu list.

Step 2: Press “Restore” to begin the recovery process from the Backup file we created

Step 3: You will be notified when the system restore is complete.

Android system recovery mode can be quite useful, especially when your system is unresponsive. As we have also seen, it is important to know how to get into and out of System Recovery mode if you are going to backup and restore your Android system. It is also quite easy to do both of these things.

[Solved] Warning: Camera Failed on Xiaomi Redmi Note 12 5G

In this article, you will learn why camera fails on Xiaomi Redmi Note 12 5G devices, how to make camera work again, as well as a system repair tool to fix this issue in few clicks.

Xiaomi Redmi Note 12 5G devices are one of the best Android devices available in the market and their users are always satisfied with their features. However, it is a recent observation that many Xiaomi Redmi Note 12 5G users complain about Xiaomi Redmi Note 12 5G camera failed error while using the camera App on the Xiaomi Redmi Note 12 5G device. It is a strange error and pops up suddenly with only one option to tap on, i.e., “OK”

The error message reads as follows: “Warning: Camera Failed”.

Once you click on “OK” the app shuts down abruptly and your Xiaomi Redmi Note 12 5G camera is failed. We understand this is not a very pleasing situation, thus, here are ways to tackle the camera failed Xiaomi Redmi Note 12 5G issue. Let us now move ahead and find out why exactly you experience Warning: Camera Failed error and how to fix it.

Part 1: Why Xiaomi Redmi Note 12 5G phone has Warning: Camera Failed error?

We are all aware that no device runs smoothly, without any glitches. We also know that there is a cause behind every problem. Listed below are a few reasons behind camera failed error, especially on Xiaomi Redmi Note 12 5G devices:

1. If you have recently updated your OS version, there are chances that certain bugs are preventing the camera App from functioning normally. Also, if the update is interrupted and not downloaded completely, certain apps may suffer.
2. There are chances of your internal storage being cluttered with unwanted Apps and files leaving no space for the camera App to save its data and work smoothly.
3. If you haven’t cleared camera Cache and Data, the chances of the App to get clogged up increase tremendously which disrupt its working.
4. Warning: Camera Failed error can also be a direct outcome of a change in the system settings or the Xiaomi Redmi Note 12 5G device’s internal settings.
5. Finally, if you tamper a lot with the camera settings and do not update the App whenever it is available, Xiaomi Redmi Note 12 5G Camera App will not be efficient.

There might be much more reasons for the camera failed error, but these are the most obvious ones. Now let us now move on to troubleshooting the problem.

Part 2: How to fix Xiaomi Redmi Note 12 5G Camera Failed in One Click?

If you are experiencing some kind of issues in your Xiaomi Redmi Note 12 5Gs such as Xiaomi Redmi Note 12 5G camera failed, the Xiaomi Redmi Note 12 5G device stopped working, black screen, play store not working, etc. There is a special software is designed for such kind of issues in Android devices, i.e. dr. fone. The tool enables the users to fix various kinds of issues in the Xiaomi Redmi Note 12 5G devices and perform a complete system repair so the Xiaomi Redmi Note 12 5G device starts working normally.

Dr.Fone - System Repair (Android)

One-click solution to fix camera failed on Xiaomi Redmi Note 12 5G devices

• The tool has a one-click operation which makes it super easy to use.
• You don’t need any technical skills expertise to operate the software.
• The software supports all the Xiaomi Redmi Note 12 5G devices including the latest and older ones.
• The software can fix the “warning camera failed”, the app is crashing, failed update, etc.

4,616,396 people have downloaded it

Note: You have to remember that the system repair may erase all the Xiaomi Redmi Note 12 5G device data. So, create a backup of your Xiaomi Redmi Note 12 5G data first and then try fixing the Xiaomi Redmi Note 12 5G phone.

Follow the steps given below and fix the camera failed error:

Step 1. Download the software on your computer and launch it. Connect your device and select the System Repair option from the main interface. In the next screen, select Android Repair module.

Step 2. You will have to provide the Xiaomi Redmi Note 12 5G device details accurately to ensure that the software provides a precise firmware package to be downloaded. Enter brand, name, model, country, and carrier of your device and agree to the terms and condition.

Step 3. Now put your device in the download mode. The software will provide you with a guide to put the phone in download mode to begin the downloading process.

Step 4. As soon as the firmware is downloaded, the software will automatically initiate the repair process. You will be able to see the ongoing repair.

When the software is done repairing the system, you will be notified. Thus, the Camera failed Xiaomi Redmi Note 12 5G error in your phone will be fixed.

Part 3: How to fix Camera Failed error by clearing camera data?

Has anyone ever informed you that it is absolutely necessary to keep clearing camera data every once in a while? Yes, since it deletes all unnecessary data stored in respect of the App and no, it does not mean that all your photos and videos will get deleted. Just follow the steps given below to clear camera data:

1. First, visit “Settings’” on your Xiaomi Redmi Note 12 5G device and select “Apps” or Application Manager”.

2. Now a list of all Apps will appear before you. Keep scrolling down until your find “Camera”.

Tap on “Camera” to open the “Camera Info” screen and once you are there, hit “Clear Data” option as shown below.

That’s all, now return to the Home Screen and access the camera again. Hopefully, it will work now.

Part 4: How to fix Camera Failed error by removing third-party Apps?

Another tip to fix Xiaomi Redmi Note 12 5G camera failed error is by deleting a few unwanted third-party Apps (recently installed) to free some space in the Xiaomi Redmi Note 12 5G device’s internal storage. It is essential to create and keep storage space for the camera App to function smoothly and allow it to store its data as well. Also, if this issue only happens recently, it might be some newly installed Apps causing some glitches with the camera.

Simply, follow the instructions given below to remove Apps from Xiaomi Redmi Note 12 5G Devices:

1. Click on the “Settings” icon on the Home Screen and from the options before you, select “Apps”/ “Application Manager”.

2. You will see that a list of downloaded and built-in Apps will open up before you as follows.

3. Now, once you select the App you want to uninstall, the App Info screen will appear. Tap on “Uninstall” option and then tap on “Uninstall” again on the pop-up message.

The App will be removed immediately and its icon will disappear from the Home Screen and you will notice an increase in the storage capacity of your device.

Part 5: How to fix Camera Failed error by wiping Cache Partition?

This method might seem tedious and time-consuming and you may also lose your data and essential settings. However, wiping the Cache Partition only cleans your device system internally and gets rid off any unwanted and trouble making elements causing Warning: Camera Failed error. Follow the step-by-step guide given below to clean Cache Partition smoothly:

1. Firstly, switch off the Xiaomi Redmi Note 12 5G device by pressing the power button and tapping on “Power Off” as shown in the screenshot below. Then wait for the lit screen to turn off completely before proceeding further.

2. Now, press and hold the power on/off, home and volume up button simultaneously. Your device will now vibrate. This a signal to let go of the power button (only).

3. Once the Recovery Screen appears, leave all buttons and use the volume down key till you reach “Wipe Cache Partition”.

4. Now, to select the option to use the power on/off button and wait for the process to get over. Once this done, tap on “Reboot system now” and see that your device restarts normally.

You may try to use the camera app once the process completes.

Part 6: How to fix Camera Failed error by Reset Settings?

Resetting the camera settings solves the problem 9 out of 10 times and thus is worth a try.

1. To reset, first, launch the Camera App by tapping on its icon.

2. Then go to Camera “Settings” by tapping on the circular gear like icon.

3. Now look for “Reset Settings” options and click on it.

Once done, go back to the Home Screen and start the camera App again to use it.

Part 7: How to fix Camera Failed error by Factory Reset?

Lastly, if the above-mentioned techniques do not help you in fixing the camera failed error, you can consider performing a Factory Reset. Note: This method will delete all your saved data so it is advised to backup before you start the process.

Here are the steps to factory reset your device to fix “Warning: Camera Failed” Error:

1. Start by visiting “Settings” on your Xiaomi Redmi Note 12 5G device on which the camera has failed.

2. Now from the list of options before you, select “Backup and reset” and move ahead.

3. Now you must first select “Factory data reset” and then tap on “Reset Device” as shown in the screenshot below.

4. Finally, you have to click on “Erase Everything” and wait for the Xiaomi Redmi Note 12 5G device to reboot itself.

Note: You will have to set up your Xiaomi Redmi Note 12 5G device from scratch once it is reset, however, that is a small price to pay to fix your Camera App.

Warning: Camera Failed error is not a rare phenomenon and many users experience it on daily basis. So, there is no need to panic, All you need to do is carefully follow the instructions given above and repair your Camera App yourself. You do not need to seek any technical assistance for the same as the camera failed issue is not difficult to deal with. So go ahead and try these tricks to enjoy using the Camera App on your Xiaomi Redmi Note 12 5G devices.