How to Flash Dead Xiaomi Redmi Note 12 Pro 4G Safely | Dr.fone

How to Flash Dead Xiaomi Redmi Note 12 Pro 4G Safely | Dr.fone

Abel Lv11

How to Flash Dead Xiaomi Redmi Note 12 Pro 4G Safely

  • Fix malfunctioning Android to normal in one click.
  • Highest success rate to fix all Android issues.
  • Step-by-step guidance through the fixing process.
  • No skills required to operate this program.

A phone is considered to be dead when it becomes completely unresponsive and refuses to switch on. Similarly, an Android phone is said to be dead when it does not boot up. You may try to switch it on several times by pressing the power button but in vain. You will see no sign of the phone’s logo or anything like a welcome screen. The Android phone’s screen remains black and does not illuminate when you try to turn it on. Interestingly, even when you charge this dead device, it does not show that it is getting charged.

Many people regard this as a battery issue, and many think of it as a temporary software crash. Some users also seem to believe that this is because of a virus attack. However, if you are looking for ways that tell how to fix a dead Android phone, you must understand that a dead phone or device can be cured by flashing custom firmware safely. If you are keen to know how to flash a dead Android phone or how to flash dead Android phones using PC, here are ways to help you.

Given below are eight techniques to flash your Xiaomi Redmi Note 12 Pro 4G safely, depending upon which phone you are using. It may seem time-consuming and tedious, but we can assure you that it works. So, move ahead and read on to learn about flashing new firmware, your Xiaomi Redmi Note 12 Pro 4G, MTK Android, and Xiaomi Redmi Note 12 Pro 4G safely.

safe Download safe & secure

Part 1: Can a Dead Phone Be Flashed?

Flashing a dead Android phone might be skeptical for many users who have been in such a situation. Although it is possible to flash a dead Android phone, it is essential to be aware of the reasons that lead you into such a situation. Before a remedy, diagnosing the problem is a necessity for retaining the Xiaomi Redmi Note 12 Pro 4G device.

From battery issues to physical damage to the Xiaomi Redmi Note 12 Pro 4G device, there can be many reasons your Xiaomi Redmi Note 12 Pro 4G died. The reasons for a dead Android phone are not restricted to these points. There can be software-related issues or firmware issues that might cause such havoc on your Android.

Part 2: How to flash Xiaomi Redmi Note 12 Pro 4G in one click

While you are worried about how to flash Xiaomi Redmi Note 12 Pro 4G instantly with a single click, Dr.Fone - System Repair (Android) swiftly makes its way with a galore of options for you. This amazing tool from Wondershare can fix a plethora of Android system issues such as crashing of apps, black screen of death, failed system update, etc. Moreover, it can also get your device out of boot loop, unresponsive bricked Android mobiles as well as stuck at the Xiaomi Redmi Note 12 Pro 4G logo.

Dr.Fone - System Repair (Android)

One-click solution to flash Xiaomi Redmi Note 12 Pro 4G

  • The high success rate in fixing Xiaomi Redmi Note 12 Pro 4G Android devices.
  • All the latest Xiaomi Redmi Note 12 Pro 4G devices are supported by this software.
  • One-click operation of this tool helps you how to flash Xiaomi Redmi Note 12 Pro 4G easily.
  • Being very intuitive, it doesn’t need you to be tech-savvy to use this software.
  • It is one of its kind and the first one-click Android repair software on the market.

3981454 people have downloaded it

Step-by-step Tutorial

We are going to explain how to flash a dead Android phone using a PC using Dr.Fone - System Repair (Android)

Note: Before you understand how to flash Dead Android phone, take a backup of your data and then proceed to avoid any data loss.

Phase 1: Prepare your Xiaomi Redmi Note 12 Pro 4G

Step 1: Once you have downloaded and installed Dr.Fone, launch it. From the main menu, tap on ‘System Repair’ and get your Xiaomi Redmi Note 12 Pro 4G connected to it.

how to flash Dead Android phone

Step 2: Click ‘Android Repair’ from the available options, and then press the ‘Start’ button to fix the Dead Android phone by flashing it.

android repair to flash dead phone

Step 3: On the Xiaomi Redmi Note 12 Pro 4G device information screen, pick the appropriate device brand, name, model, and other details followed by tapping the ‘Next’ button.

choose brand info

Phase 2: Put the Android device in Download mode to start repair.

Step 1: It is essential to boot your Xiaomi Redmi Note 12 Pro 4G in Download mode before repairing.

  • If the Xiaomi Redmi Note 12 Pro 4G device has a ‘Home’ button: Turn it off and then hold down the ‘Volume Down’, ‘Home’, and ‘Power’ buttons altogether for 5-10 seconds. Un-hold all of them and hit the ‘Volume Up’ button for entering ‘Download’ mode.

flash android with home key

  • In the absence of a ‘Home’ button: Switch off the Android device and hold the ‘Volume Down’, ‘Bixby’, and ‘Power’ buttons for 5 to 10 seconds, then release them. Hit the ‘Volume Up’ button for entering the ‘Download’ mode.

flash android with no home key

Step 2: Press the ‘Next’ button for initiating firmware download.

flashing samsung galaxy

Step 3: Once the firmware gets downloaded and verified Dr.Fone - System Repair (Android) starts to flash your Dead Android phone. All the Android system issues will be fixed soon after.

dead android flashed

safe Download safe & secure

Part 3: How to flash Xiaomi Redmi Note 12 Pro 4G dead phone with Odin?

In this segment, we will learn how to fix the dead Android phone, i.e., Xiaomi Redmi Note 12 Pro 4G phones using Odin software. Odin is software used internally by Xiaomi Redmi Note 12 Pro 4G to generally unblock devices and perform a more utility-based job, namely, flashing new firmware in place of the old one. There are different variants available, so choose the one which is supported by your Galaxy phone. Here is a step-by-step explanation of how to flash dead Android phone (Xiaomi Redmi Note 12 Pro 4G) using Odin software.

Step 1: Install the driver software on the computer. You can find the best driver software for your device and PC on the official Xiaomi Redmi Note 12 Pro 4G website. You may also download Xiaomi Redmi Note 12 Pro 4G Kies on your PC. Once you have downloaded and installed the driver software, restart the PC.

Step 2: Now download suitable firmware for your device in the form of a zip folder that you can open and store on your desktop.

download suitable firmware

Make sure the file is .bin, .tar, or .tar.md5 only as these are the only file types recognized by Odin.

firmware zip file

firmware md5 file

Step 3: In this step, download the latest version of Odin on your PC and move it to the desktop, and then right-click on the downloaded Odin file to select “Run as Administrator”.

download odin

run as administrator

Step 4: Now, boot your dead device to Download Mode by pressing the power, volume down, and home button together. When the phone vibrates, release the power button only.

boot in download mode

Step 5: Gently press the volume up button, and you will see the Download Mode Screen.

android download mode

Step 6: Now, you may use a USB to connect your Xiaomi Redmi Note 12 Pro 4G to the PC. Odin will recognize your device, and in the Odin window, you will see a message saying “Added”.

connect android device

Step 7: In this step, find the tar.md5 file you downloaded by clicking on “PDA” or “AP” on the Odin window and then click “Start”.

open md5 file

Finally, once the flashing process is complete, your Xiaomi Redmi Note 12 Pro 4G phone will reboot and start normally, and you may see a “Pass” or “Reset” message on the Odin window on the PC.

Part 4: How to flash MTK Android dead phone with SP Flash tool?

SP Flash tool, also known as SmartPhone Flash tool is a popular freeware tool used to flash custom ROM or firmware in MTK Android phones. It is a very successful tool and is extremely easy to use.

Let us look at the steps given below to learn how to flash dead Android phones using PC with the help of the SP Flash tool.

Step 1: To start with, download and install the MTK driver on your PC and then download the ROM/firmware you wish to use for flashing purposes.

Step 2: Once done, you should download the SP Flash tool and extract it on your PC and move on to launch the Flash_tool.exe file to open the SP Flash tool window.

download sp flash tool

Step 3: Now, on the SP Flash tool window, click on “Download” and select “Scatter-loading”.

scatter loading

Step 4: The last step would be to locate the file downloaded by you and click “Open” and then finally, select “Download” on the SP Flash tool window.

load the downloaded file

After completing the above steps, connect your dead device to the PC with a USB cable and wait for it to get recognized. The flashing process will take a few minutes to finish and then you will see a green circle indicating “OK Download”.

That’s it! Now simply disconnect your phone and wait for it to reboot.

Part 5: How to flash Xiaomi Redmi Note 12 Pro 4G dead phone with the Phoenix tool?

Phoenix tool, better known as PhoenixSuit, is a tool similar to the SP False tool and Odin. It works very well with Xiaomi Redmi Note 12 Pro 4G and is the best answer to “How to fix dead Android phone?”, “How to flash dead Android phone using PC?”, etc.

Let’s look at the steps of flashing the Xiaomi Redmi Note 12 Pro 4G dead phone with the Phoenix tool.

First, download and install the Xiaomi Redmi Note 12 Pro 4G PC Suite driver on your PC. Then you will need to download the PhoenixSuit tool and then launch it.

nokia pc suite

Now, on the toolbar, click “Tools” and select “Data Package Download” from the drop-down list.

data package download

Then move to download the firmware for your dead Xiaomi Redmi Note 12 Pro 4G and save it in a new Folder. Once done, go back to the Phoenix tool window and click on “File” and select “Open Product”.

open product

Simply, feed in the details and then click “OK”.

check the details

After this, click on “Flashing” and select “Firmware update” and then browse to select the appropriate product code and then click “OK” again.

Then move on to select “Dead Phone USB Flashing” from the Firmware Update Box.

dead phone usb flashing

Lastly, just click on “Refurbish” and connect your phone to the PC using a USB cable.

That was it, the flashing process may take up to a few minutes after which your dead Xiaomi Redmi Note 12 Pro 4G will restart automatically.

Part 6: How to flash a dead phone that won’t turn on via factory reset?

Using tools for flashing Android devices can be a solution; however, it is heavily restricted to the Xiaomi Redmi Note 12 Pro 4G device models. For a generalized solution, there can be other options that you can go with. Factory resetting an Android device by putting it in Recovery Mode is one way. To know how to flash a dead Android phone using factory reset, go through the steps featured below:

Step 1: To initiate the process, you will have to put your Xiaomi Redmi Note 12 Pro 4G in Recovery Mode. Generally, Android phones are put in Recovery Mode by holding the “Power” and “Volume Up” keys for a few seconds after turning them off. The key combinations can vary according to your Xiaomi Redmi Note 12 Pro 4G.

Step 2: As the Android boot menu opens on your screen, use the “Volume Down” and “Volume Up” keys to scroll up and down the menu. On accessing the “Wipe Data/Factory Reset” option, use the “Power” key to select the particular option.

choose wipe data factory reset option

Step 3: Continue to select the “Yes” option for confirming the factory reset of the Android device. The phone will automatically reboot after successfully factory resetting.

Part 7: How to flash a dead Android phone by checking screen faulty

The screen of your Xiaomi Redmi Note 12 Pro 4G may be faulty, due to which it is not launching. While seeking the right way of how to fix a dead Android phone, you can force restart your phone using the Volume buttons according to your device model.

If the Android vibrates on restarting and the screen does not lighten up, the problem can be directed to a hardware fault. The screen is broken and needs physical assistance to resolve the issue.

check and fix the screen

Part 8: How to fix a dead Android phone by changing the battery

Another solution that can help you fix the dead Android phone is changing its battery. The battery of an Android device can last up to 3 years. When its capacity drops to a bare minimum, it is best to change the battery of your Android. Upon trying to restart your Xiaomi Redmi Note 12 Pro 4G, if it does not, you might need to replace your battery. All Android phone batteries are removable, which should be regulated with proper supervision.

replace the android battery

Part 9: How to repair dead Android phone by contacting official support

If you are unable to discover any proper solution for how to flash dead Android phones, you might have to consult the respective customer support of the Android phone manufacturers. Consult customer support to discover why the phone is dead and how it can be flashed. The respective personnel will assist you in resolving the issue, which might require monetary input from your side.

Conclusion

A dead Android phone might be the cause of worry, but the techniques given above to flash your dead Android device safely are very helpful. These methods have been tried and tested by users all over the world and thus, we recommend them to you. If your phone is dead or has become unresponsive, do not panic. Depending on your phone’s brand, here are ways to guide you on how to fix the dead Android phone and how to flash dead Android phone using PC.

It has been observed that Wondershare Dr.Fone – System Repair (Android) assists in the best way. Resolve all your concerns involving your dead Android phone and flash it to make it operable again.

Carefully follow the instructions given, and you will be able to reboot your dead Android phone successfully.

Xiaomi Redmi Note 12 Pro 4G Not Connecting to Wi-Fi? 12 Quick Ways to Fix

Nowadays, it’s pretty much essential to have your Xiaomi Redmi Note 12 Pro 4G or smartphone connected to the internet. Whether you’re watching videos, looking something up, or using any kind of app, you need the internet for these applications to function correctly.

This is why it can so annoying when it gets to a point where the internet connection isn’t working. However, the problem of a web page not loading correctly is just the tip of the iceberg.

There are plenty of problems you could experience, whether it’s the Wi-Fi network keeps disconnecting on its own without any warning, perhaps a security issue where the passcode or IP address isn’t being registered properly, or even if the connection is just being super slow, even if there’s no reason too.

Luckily, despite there being so many problems out there, there are also many solutions. Today, we’re going to share with you the complete definitive guide to help you get your Xiaomi Redmi Note 12 Pro 4G connected and free from problems and issues.

Part 1: Restart your Xiaomi Redmi Note 12 Pro 4G

Begin by powering off your Xiaomi Redmi Note 12 Pro 4G and unplugging your router. Wait for about a minute before plugging in the router and turning on your device. This simple reset can often restore stable connections and fix Android wifi not working.

restart android

Part 2: Turn on Airplane mode and turn off

Turn on Airplane Mode for a few seconds, then turn it off. This maneuver refreshes your device’s network connections and might rectify the Android not connecting to wifi issue.

turn on airplane mode

Part 3. Check Wi-Fi Router settings

The third step you’ll want to take is making sure the internet router in your house is working properly and is actually sending internet data to your Xiaomi Redmi Note 12 Pro 4G. Of course, if you have other internet-enabled devices connected to the same router and they’re working fine, you know this isn’t the problem.

However, if you’ve got a problem with Wi-Fi not working on your Android and other devices in your home or office, you know you’ve got a router problem. Here’s how to solve it.

  1. Go to your internet router and check the indicator lights
  2. While this depends on your device, a green or blue light will mean the connection is good, whereas a red light indicates a problem
  3. Press the Restart button on your router and wait ten minutes before reconnecting your device and connecting again
  4. Call up your internet provider to see if there’s an internet connection issue in your area
  5. Open your web browser and log into your router settings to ensure your Xiaomi Redmi Note 12 Pro 4G is connected to the Wi-Fi network and is allowed to send and receive data

Part 4. Boot your Android in safe mode

wifi not working on android - safe mode

If you’re unable to connect to the internet, but other devices have no issues, you may find the issues is coming from within your Xiaomi Redmi Note 12 Pro 4G itself. Fortunately, there are ways you can see whether this is the problem.

The best way to do this is to boot your device in Safe Mode. The process for doing this will depend on the make and model of your Xiaomi Redmi Note 12 Pro 4G, but the basic process goes as follows;

  1. Turn off your Xiaomi Redmi Note 12 Pro 4G by holding down the Power button and tapping Power Off. Wait a few minutes to ensure the Xiaomi Redmi Note 12 Pro 4G device is completely off
  2. Press and hold the Power button to turn your phone on, but the press and hold both the volume up and volume down buttons at the same time
  3. You will see the words ‘Safe Mode’ appear on your screen as the Xiaomi Redmi Note 12 Pro 4G device loads
  4. Now you will be booted in Safe Mode. Try connecting to the internet again to see if it works

If your device connects to the internet while in Safe Mode, you’ll know you have a problem with an app or service that’s running on your device. If this is the case, you’ll need to go through your apps and delete them and then reinstall them one at a time until you find the app or service that is causing your internet problems.

Part 5. Check the Android Wi-Fi adapter

wifi not working on android - check adapter

If you’re using a Wi-Fi adapter on your device to connect to the internet, you’ll need to make sure this is working. This could be an adapter on your Xiaomi Redmi Note 12 Pro 4G itself, especially if you’re using an older device, or if you’re using an adapter to boost the ranger of your router network.

You need to check both of these to make sure your connection is working properly.

  1. If using an Android Wi-Fi adapter, make sure all the Xiaomi Redmi Note 12 Pro 4G device drivers are up to date, and if you’re using an app, make sure the app is updated, and all the settings allow an internet connection
  2. If you’re using a router adapter, make sure it’s set up properly, and your Xiaomi Redmi Note 12 Pro 4G is connected to the adapter using the correct passwords. Try connecting another device to see if the internet connection is working on there
  3. Whichever method you’re using, try disconnecting your Xiaomi Redmi Note 12 Pro 4G and forgetting the network, and then reconnecting and entering the right password to refresh the connection

Part 6. Check SSID and IP address on Android

To make a Wi-Fi connection work, your Xiaomi Redmi Note 12 Pro 4G needs to match two codes that connect and relate to your router to establish the connection and work correctly. These are known as the SSID and the IP address.

Every wireless device will have its own codes and making sure they’re matched to the network you’re connecting to is crucial to ensuring the internet is working on your Xiaomi Redmi Note 12 Pro 4G. Here’s how to check on your Xiaomi Redmi Note 12 Pro 4G to make sure everything is correct.

  1. Tap the Settings menu option, followed by Wi-Fi on your Xiaomi Redmi Note 12 Pro 4G
  2. Turn on your Wi-Fi network and connect it to your router
  3. Find the router name (SSID) and make sure it’s exactly the same as the SSID written on your router
  4. Once connected, tap the Wi-Fi network and you will see the IP address. Check both your phone and the router codes to make sure this number matches

When these numbers are matching, if your Android is still not connecting to wifi, you’ll know this wasn’t the problem.

Part 7. Fix Android system issues in one click

If none of the solutions above are working, this could indicate a real problem with the firmware and operating system of your Xiaomi Redmi Note 12 Pro 4G. Fortunately, a fast solution to get everything working again is to completely repair the software of your phone.

You can do this easily using powerful Android recovery software known as Dr.Fone - System Repair (Android) . This is the leading repair tool on the market and is designed to fix and repair any firmware and software problems you may be having.

Dr.Fone - System Repair (Android)

A one-click tool to fix Wi-Fi not working on Android

  • Can repair Android from any problem including the black screen of death
  • A trusted software application used by 50+ million people around the world
  • The most user-friendly mobile repair application available right now
  • Supports over 1,000+ Android models and devices
  • A world-class customer support team to help you whenever you need them

3,483,527 people have downloaded it

To help you have the best and the most accurate experience when using the Dr.Fone - System Repair (Android) application, here’s a complete step-by-step guide on how to use it.

Step One Make your way over to the Wondershare website and download the Dr.Fone - System Repair (Android) software. Install it onto your computer by following the on-screen instructions.

Once installed, connect your Xiaomi Redmi Note 12 Pro 4G to your computer using a USB cable, and open the software, click “System Repair”.

wifi slow on android - get a tool to fix

Step Two Click the “Android” option in the menu and then click “Start” to begin the Repair process.

fix wifi slow on android by repairing android

Step Three On the next screen, go through the options and use the drop-down menus to make sure the information is correct for your individual device. Accept the terms and conditions of the software, and then click the “Next” button.

wifi slow on android - select info

Step Four Confirm you want the software to carry out the repair process by typing the ‘000000’ code into the pop-up box and pressing Confirm. Make sure you read everything displayed in this box beforehand to know what’s happening.

wifi not working on android - confirm the repair

Step Five Now put your phone into Download Mode by following the on-screen instructions, so your device is ready for the repair process. The method for getting your phone into Download Mode will vary depending on your device, so make sure you’re following the right instructions.

wifi not working on android - boot in download mode

Step Six Once the software has detected your device in Download Mode, it will automatically begin the repair process. You need to make sure your device stays connected throughout this time, and your computer stays on.

wifi not working on android - begin repairing process

The whole process is automatic, so you won’t need to do anything until it’s finished. Once completed, you can disconnect your phone and start connecting it to the internet as normal!

wifi not working on android - wifi issue fixed

safe Download safe & secure

Part 8. Check the Wi-Fi connectivity on another phone

android phone not connecting to wifi - connectivity on another phone

When experiencing problems with your Wi-Fi network, it’s worth noting the problem might not be with your phone, but rather the Wi-Fi network itself. This is why it’s important to make sure you check the connection on another device.

Of course, if you’re already using another phone on your Wi-Fi network, you know this isn’t the case. However, if you’re not sure, here’s what you need to do;

  1. Get another Android or iOS phone or tablet
  2. Open the Settings menu and connect to the Wi-Fi network you’re having problems with
  3. Enter the password and connect to the network
  4. Open a web browser on the phone and try loading a web page
  5. If the page loads, you know the Wi-Fi network isn’t the problem
  6. If the page doesn’t load, you know you’ve got a problem with your Wi-Fi network

Part 9. Change the password of the Wi-Fi

android phone not connecting to wifi - password settings

Each Wi-Fi network router will give the opportunity to choose and change the password you have to let devices connect to your network. It’s important you try changing this because you never know if someone else has accessed your network and could be blocking your device. Here’s how it works;

  1. Log onto your computer and open your Wi-Fi settings
  2. Depending on the brand and method of your individual router, navigate to the Wi-Fi password settings menu
  3. Change the password to something complicated using all available digits and characters
  4. Save the password and restart the router to disconnect all devices
  5. Now connect your Xiaomi Redmi Note 12 Pro 4G to the router using the new password

Part 10. Reset network settings on Android

android phone not connecting to wifi - reset network

Just like the method above where you’ll be effectively resetting the network settings on your router, if this hasn’t worked, you’ll be able to reset the network settings on your Xiaomi Redmi Note 12 Pro 4G, hopefully removing the bugs and allowing you to connect.

Here’s how you can do this easily on your Xiaomi Redmi Note 12 Pro 4G;

  1. From the home screen of your Xiaomi Redmi Note 12 Pro 4G, open the Settings menu
  2. Tap the Backup & Reset option
  3. Tap the Reset Network Settings option
  4. Tap the Reset Network option
  5. If you need to, enter the PIN number or passcode for the Android device, and the Xiaomi Redmi Note 12 Pro 4G device will confirm the reset has taken place
  6. Reconnect your Xiaomi Redmi Note 12 Pro 4G to your Wi-Fi network for the changes to take effect

Part 11. Clear partition cache in recovery mode

wifi not working on android - clear partition

As you continue to use your Xiaomi Redmi Note 12 Pro 4G, the partition cache will fill up with data your device needs and doesn’t need. However, by clearing your device’s partition cache, you can make clear up some space which should help your device have enough memory to connect to the internet.

  1. Turn off your Xiaomi Redmi Note 12 Pro 4G
  2. Turn it on by holding down the power button, volume button, and home button
  3. When your phone vibrates, let go of the Power button, but continue to hold the volume button
  4. When a menu is displayed, use the volume buttons to navigate the menu
  5. Select the Android System Recovery option, followed by Wipe Cache Partition
  6. Restart your device and connect to the internet

Part 12. Reset factory settings

wifi not working on android - factory settings

If worse comes to worst, another option you have is to factory reset your Xiaomi Redmi Note 12 Pro 4G. As we’ve spoken about above, while using your phone from the day you started using it, your device will fill up with files and data which can become messy and causes bugs.

However, by factory resetting your device, you can start again from the factory default from which you first received it, ultimately clearing the bugs. Make sure you back up your device before proceeding because it will erase your personal files.

  1. Open the Settings menu on your Xiaomi Redmi Note 12 Pro 4G
  2. Navigate to System > Advanced > Reset Options
  3. Tap the Reset phone option, and enter your PIN code if required
  4. Tap Erase Everything
  5. Wait for your phone to complete the process
  6. Restart your device and connect to the internet

safe Download safe & secure

Reasons for Xiaomi Redmi Note 12 Pro 4G Stuck on Boot Screen and Ways To Fix Them

One of the main reasons why people own a phone is for convenience. It will be ironic if that device, supposed to grant convenience, provides problems instead. Some people face this when their Android phone is stuck on the logo page and unable to do anything. As expected, this is common in Android phones and is why people are unhappy with Android phones.

This article will share the possible reasons why your Android phone is stuck on the boot screen. This article will share three possible reasons for this problem and five valuable tips to help fix this issue. If all else fails, we have an application to share and recommend that is guaranteed to solve your problem in no time. Keep on reading to find out more!

Part 1. Why Is Your Xiaomi Redmi Note 12 Pro 4G Stuck on the Boot Screen?

There are countless reasons why a problem happens, just like why your Android phone is stuck on the logo page. This section sieved out the top 3 reasons why your Android boot screen happens and some tips to overcome it.

1. Changes to the Software

Android is a flexible operating system. It allows users to customize it in any way they desire, which is Android’s beauty. The customizable nature of the operating system allows users to unlock, root, flash, and tinker. However, this flexibility in customization might be a double edge sword. Accidental tampering with the Android system might result in software problems, such as being stuck on the Android boot screen.

Fortunately, this is not a complicated fix. Android accepts different fixes and allows the system to return to how it once was. Even with software issues, the system does not get completely inoperable. The best way to fix changes to the software is to start from the beginning of the process. This might offer the best chance for you to restore your phone to normal.

Although it is fun to customize and change the software, following trusted sources ensures you do not damage your phone. Having an Android phone stuck on the logo page is one of the many examples of the problems that might happen if changes to the software go out of hand.

2. Android Software Updates

Updates are a common cause of Android phones stuck on the logo. It happened when the update did not complete as it should have been. Several reasons for incomplete updates, such as poor internet connection, the connection between computer and phone being lost, a power cut, the phone freezing, and the list go on. When an update is uncompleted, issues such as being stuck at the Android boot screen and many others might occur.

Before an update starts, your mobile device will notify you of the duration of the update. As a tip, set aside an additional 10-15 minutes on top of the update duration to ensure your update is completed successfully. It will be ideal for activating the software update only when there is sufficient power in your phone or keep it charging during the update.

When an update is disrupted or stopped before it completes, the existing Android version will become corrupted while the new software to be updated is incomplete. This means that your Xiaomi Redmi Note 12 Pro 4G has no system to run on. Always complete your software updates, and you will not have the problem of your Android phone getting stuck on the logo.

updating software

3. Malfunctioning Applications

If you noticed that your Android phone is stuck on the logo page only after installing certain apps, there is a high chance that the app is not compatible with the existing apps in your phone or with the Android version. When an app conflicts with the Android system or other apps, this will run into problems with your phone.

This problem typically happens when an app is downloaded from a third-party source, not the official Google Play Store. This app from a third-party source might be malicious or contain a virus. This can cause problems such as being stuck at the Android boot screen.

To overcome this, locate the app that has been giving you issues and remove the app from your phone. Restart your device, and you should be able to have your Xiaomi Redmi Note 12 Pro 4G functioning properly.

malfunctioning apps on android

Part 2. 5 Helpful Ways To Fix Android Phones Stuck on Boot Screen

After understanding the common problems on why your Android phone is stuck on the logo page, here are five easy solutions you can try solving at home.

1. Force Reboot

When encountering problems with your Xiaomi Redmi Note 12 Pro 4G, such as being stuck at the Android boot screen, you should first try a forced reboot. This simple yet effective solution could be what you need to solve all your Android problems. It is essential to leave your device turned off for at least a minute or two before turning it back on.

forcing rebooting android device

2. Pull Out Battery

Another way to restart your Xiaomi Redmi Note 12 Pro 4G when it is frozen is to try taking the battery out. Android devices are designed with a removable battery, and sometimes you can resolve the issue easily by removing the battery and replacing it after a couple of seconds. Then, turn on your device again and test to see if your Android phone is stuck on the logo page.

If it works, then the problem is solved. However, some Android devices come with a built-in battery. For these kinds of devices, a stimulated battery pull should be attempted. A simulated battery pull is a set of instructions telling your Xiaomi Redmi Note 12 Pro 4G to switch off and on again. If your device does not offer the simulated battery pull option, omit this troubleshooting option.

removing battery on android device

3. Charge Your Device

If your Android phone is stuck on the logo page and not getting past it, no matter how many times you have tried, it may be due to a low battery! As simple as it sounds, plug your device into a power outlet and try restarting your phone. You might be surprised that this simple fix is all it takes to solve your Android problem.

charging android device

4. Wipe Cache Data

Cache refers to a software or hardware component of an Android device that stores your program and data for reference. This data might result from the daily usage of your device or duplicate data from a different source on the Xiaomi Redmi Note 12 Pro 4G device. Similar to a computer, if the cache occupies too much space on your device, it might cause your Xiaomi Redmi Note 12 Pro 4G to become slower and eventually get stuck at the Android boot screen.

Wiping out the cache data from your Xiaomi Redmi Note 12 Pro 4G could free up more space, allow your device to function faster, and avoid problems such as being stuck at the Android boot screen. Do not worry; wiping the cache data is entirely safe and will not lead to any loss of important data or programs on your phone.

5. Factory Reset

If all the methods above fail, performing a factory rest might be your last option. However, it is important to note that performing a factory reset will erase everything on your phone, including apps, contacts, photos, etc. As a tip, back up all your data from your device before performing a factory reset. That way, you can still retrieve all your precious information after the reset.

Follow the steps below to perform a factory rest on your Xiaomi Redmi Note 12 Pro 4G:

Step 1: Turn off your phone and press the Power button and Volume Down button at the same time

Step 2: Use the Volume button to scroll the options and highlight Wipe data/factory reset. Press the Power button to begin the factory reset.

factory reset of android phones

Part 3. Bonus Tip: Best App To Solve Android Phone Stuck On Boot Screen

If all the solutions above do not work and you do not want to perform a factory reset on your phone, one option is to use an app called Dr.Fone. It is one of the most effective phone recovery solutions and can help to bring your Xiaomi Redmi Note 12 Pro 4G back to a state like it was brand new. Being stuck on the Android boot screen will be a problem of the past.

interface of dr.fone

Refer to the tutorial below to solve your Android phone is stuck on the logo page issue.

Step 1: Download and install Dr.Fone – System Repair (Android) on your computer. Open the application and connect your Xiaomi Redmi Note 12 Pro 4G to the computer.

Step 2: Select the issue you face on the next page. If you use a Xiaomi Redmi Note 12 Pro 4G phone, select Stuck at Xiaomi Redmi Note 12 Pro 4G Logo. Alternatively, you can click on Black Screen or Stuck in Boot Loop.

selecting issue from dr.fone

Step 3: Input the Brand, Name, Model, Country, and Carrier of your phone and click on Next.

filling in data for phone

Step 4: Follow the instructions provided on the page and wait for the system repair to finish. After which, click on Done to complete the process.

safe Download safe & secure

Conclusion

This article summarizes some possible reasons your Android phone is stuck on the logo page. Five useful strategies were shared to easily overcome your Xiaomi Redmi Note 12 Pro 4G being stuck in the boot. However, if all the above methods do not work, we recommend trying the Dr.Fone-System Repair.

Dr.Fone-System Repair repairs the operating system issues and fixes the problem with your Xiaomi Redmi Note 12 Pro 4G. Once you power on your Xiaomi Redmi Note 12 Pro 4G again, you can rest assured that it will be like new.


  • Title: How to Flash Dead Xiaomi Redmi Note 12 Pro 4G Safely | Dr.fone
  • Author: Abel
  • Created at : 2024-07-14 06:10:26
  • Updated at : 2024-07-15 06:10:26
  • Link: https://fix-guide.techidaily.com/how-to-flash-dead-xiaomi-redmi-note-12-pro-4g-safely-drfone-by-drfone-fix-android-problems-fix-android-problems/
  • License: This work is licensed under CC BY-NC-SA 4.0.
On this page
How to Flash Dead Xiaomi Redmi Note 12 Pro 4G Safely | Dr.fone