How to Resolve Motorola G54 5G Screen Not Working

Nothing is more frustrating than your phone’s touch screen becoming unresponsive. Given the importance of smartphones in daily work, a phone with a touch screen not working can badly affect your routine. It is an issue found in most smartphone brands, even among Motorola G54 5G phones, known for their efficient performance. If your Motorola G54 5G screen is not working, it can be an exhausting experience.

Luckily for your, multiple ways are available to resolve this issue. This article will list six fixes for resolving the Motorola G54 5G not working issue. It will also discuss the reasons behind this issue in detail and provide a list of tips to avoid it in the future.

Part 1: What Causes Motorola G54 5G Screen Unresponsive?

Answering what causes Motorola G54 5G screen unresponsiveness is difficult. Many reasons, ranging from minor bugs to serious hardware issues, can cause it. To find out the exact or near exact reason, you will have to review your device’s activity before this issue occurs. You can use the following common reasons behind the Motorola G54 5G 6T touch screen not working as the basis of your investigation:

1. Touchscreen Calibration

Excessive smartphone use can cause the touchscreen to go out of the required settings. It means until the touch screen is not recalibrated properly, the touch not working issues will continue to pop up.

2. Battery Issue

If your device’s battery is damaged or is at the end of its lifespan, it can cause the touch screen not responding issues. Moreover, the low battery and issue with the charging port can also lead to this problem.

3. Corrupted System Files

The presence of corrupted system files is also a significant cause of such issues. These corrupted files can also lead to serious performance issues on your phone.

4. Conflicting Settings

It is also possible that the conflicting settings in your device are causing this issue. These settings can range from touch sensitivity to screen refresh rate. Unless these conflicts are removed, the touchscreen performance will continue to degrade.

Part 2: The Common Solutions to Solve a Motorola G54 5G Screen Unresponsive

Fixing the Motorola G54 5Gscreen not working is easy as long as it is not a serious hardware issue. While there are multiple ways to solve this problem, we have chosen the 6 most common and easy solutions. Listed below are the 6 common solutions to solve a Motorola G54 5G screen unresponsive:

Solution 1. Restart the Motorola G54 5G Phone

As with any other issue or device, the first fix you should always try first is to restart your device. It is the best solution to fix the Motorola G54 5G not working issue if temporary bugs and glitches are the reason behind it. When you restart your device, it flushes out all temporary bugs and glitches while resetting your device’s processes. Use this guide to restart your Motorola G54 5G device:

Instruction: Press and hold the “Power” button for a couple of seconds until it turns off. Wait a few moments and then use the “Power” button to turn on the Motorola G54 5G device. In some of the Motorola G54 5G devices, you also have to use the “Volume Down” button along with the “Power” button to restart the Motorola G54 5G device.

Solution 2. Check the Charging Port and Battery

The issues with the battery of your Motorola G54 5G 5 can also lead to Motorola G54 5G not working. It can be due to your device’s low or near-empty battery. While in some cases, serious issues with the battery can also be behind this problem. Similarly, the reason behind your phone’s touch not working can be charging port issues.

Thus, you should check and clean your device’s charging port and see if it resolves the problem. Moreover, turn off your device, charge it, and then restart it to check if the touch screen not working issue is gone.

Solution 3. Contact the Motorola G54 5G Customer Support

Contacting Motorola G54 5G customer support can also help resolve the Motorola G54 5G screen not working problem. It is especially helpful if you are unable to find the cause and want to seek an expert opinion. The Motorola G54 5G customer support will help you find the issue and recommend a solution.

It is an excellent option if your Motorola G54 5G device’s touch is not working due to hardware issues. They can help guide you to a suitable service center to fix your phone and resolve this issue.

Solution 4. Wipe the Cache of Your Motorola G54 5G Device

A common reason for Motorola G54 5G Nord being stuck on the loading screen is the filled cache partition. If you do not clean out the cache partition of your Motorola G54 5G device, its performance will degrade. As a result, your device will experience issues like the touch screen not working or getting stuck at the loading screen. Here is how you can clear the cache of your Motorola G54 5G device:

Step 1: Turn off your device by pressing and holding the “Power” button. Once it is turned off, press and hold the “Power” and “Volume Down” buttons until you see the Motorola G54 5G logo.

Step 2: Now, enter your phone’s PIN or pattern and choose a language. After selecting the language, choose “Wipe data and cache.”

Step 3: Select “Wipe cache” on the next screen and confirm the action through “Yes” in the ensuing window. Once the process is complete, choose “Reboot” to restart your device.

Solution 5. Reset to Factory Settings

Sometimes, clearing the cache partition doesn’t help resolve the touchscreen issue. In that case, You have to factory reset your Motorola G54 5G device. It is the best and last solution if other fixes haven’t worked and you can’t pinpoint the reason. Factory resetting your Motorola G54 5G will delete all phone data. Thus, you should create a proper backup before trying this fix. Follow these steps to factory reset your Motorola G54 5G in no time:

Step 1: Launch Settings on your Motorola G54 5G device and tap “System” to select “Reset Options.”

Step 2: In the “Reset Options,” select “Erase all data (factory reset)” and confirm the action by again pressing “Erase All Data.” It will start the factory reset process.

Solution 6. Replace the Old Screen with A New Screen

If none of the above-mentioned fixes have worked so far, you should replace the touch screen. Replacing the touch screen is recommended in case of hardware and severe software issues. However, it can be quite an expensive fix as new touch screens aren’t cheap. The prices for new touchscreens differ depending on the model. These prices start from $20 and go up to hundreds of dollars.

Part 3: How to Avoid Motorola G54 5G Screen being Unresponsive?

Protecting your Motorola G54 5G device against system issues like touch not working is not difficult. While it is true that you can’t 100% avoid such problems, the risks can still be reduced to a great extent. To prevent your Motorola G54 5G screen from being unresponsive, here are some tips you can follow:

• ****Regular Updates:****You should always ensure that your Motorola G54 5G device runs on the latest software version available. It can help prevent bugs or glitches that might cause the screen to become unresponsive.
• ****Device Protection:****It is also essential that you use a good quality phone case and screen protector. These will protect your Motorola G54 5G device from physical damage. Drops, bumps, or scratches can damage the screen and make it unresponsive.
• ****Delete Unnecessary Apps:****If you have too many apps on your Motorola G54 5G devices, it can cause screen unresponsiveness issues. Thus, you should only install the apps you need and delete the apps that are no longer needed.
• ****Use Dr.Fone 13:****Having a professional tool like Fone in your arsenal helps a lot in protecting against system issues. If a system issue is able to pass through, Dr.Fone has the ability to resolve the issue in a matter of seconds. Moreover, it is a complete smartphone tool with data transfer, location changer, and system repair features.

A new version of Dr.Fone is expected to release in the latter half of this month. The new version will include many improvements, advanced features, and increased device support. Furthermore, it will also have a better and more user-friendly interface.

Conclusion

To sum up this article, it can be said that issues like Motorola G54 5G not working are part of life. These issues can occur anytime and are hard to completely protect against. Thus, having a problem solver like Wondershare Dr.Fone is the best choice. It will not only help you safeguard against system issues but also resolve them if they occur.

Motorola G54 5G Bootloop Problem, How to Fix it Without Data Loss

Have you, like many other users, faced the bootloop Android problem and wondered what exactly is Android boot loop. Well, Android boot loop is nothing but an error that makes your phone switch on itself every time you manually turn it off. To be precise, when your Motorola G54 5G does not remain switched off or powered off and starts to boot up automatically after a few seconds, it might be stuck in the boot loop Android.

An Android boot loop is a very common problem and is one of the first symptoms of a soft-bricked device. Also, when your device is experiencing Android boot loop issue, it does not start normally to reach the Home or Locked Screen and remains frozen at the Motorola G54 5G device’s logo, Recovery Mode or a lit-up screen. Many people fear losing their data and other files due to this error and thus, it is a very confusing situation to be in.

We understand the inconvenience caused, therefore, here are ways to tell you how to fix the bootloop problem in Android devices without losing any important data.

However, before moving on, let us learn a little about the causes for the Android boot loop error.

Part 1: What might cause the bootloop issue on Android?

Android boot loop error might seem weird and unexplainable but it occurs because of some specific reasons.

Firstly, please understand that it is a misnomer that boot loop error occurs only in a rooted device. Boot loop Android error can also occur in a stock device with the original software, ROM, and firmware.

In a rooted device, changes made, such as flashing a new ROM or customized firmware which are not compatible with the Motorola G54 5G device’s hardware or existing software, can be blamed for the boot loop problem.

Moving on, when your device’s software is unable to communicate with the system files during the start-up process, Android boot loop problem may arise. Such a glitch is caused if you have recently updated the Android version.

Also, corrupt App update files may also cause the bootloop Android issue. Apps and programs downloaded from unknown sources bring in a particular type of virus that prevents you from using your device smoothly.

All-in-all, Android boot loop error is a direct outcome of when you try to tamper with your device’s internal settings.

Hence, if you are looking for ways to guide you about how to fix boot loop issue, you will have to revamp the Motorola G54 5G device internally by either resetting it or adopting a recovery method.

Read on to know more about how to fix the bootloop error without any data loss when your device suffers from the bootloop Android problem.

Part 2: One click to Fix Android Bootloop without factory reset

If you are trying to figure out how to fix boot loop, the first option you have is the one-click fix to Android Bootloop which involves using the Dr.Fone - System Repair software.

This is designed to repair any data corruption on your device and restores your firmware to its usual working condition.

Dr.Fone - System Repair (Android)

One click to fix boot loop of Android

• #1 Android repair solution from your PC, can fix a wide range of Android system issues, such as boot loop, black screen, etc.
• The software requires no technical expertise, and anybody can use it
• A one-click solution when learning how to fix Android boot loop
• Not require root Android phones.
• Works with most Motorola G54 5G devices, including the latest Motorola G54 5G phones like S22
• Simple and easy-to-use user interface

4,689,059 people have downloaded it

To help you get started, here’s a step-by-step guide on how to use Dr.Fone - System Repair.

Note: This method can erase data on your device, including your personal files, so make sure you’ve backed up your device before proceeding.

Step #1 Download the Dr.Fone - System Repair software from the website and install it onto your computer.

Open the software and select the System Repair option from the main menu to fix the Android bootloop error.

Step #2 Connect your Motorola G54 5G to your computer using the official cable and select the “Android” option from the three menu items. Click “Start” to confirm.

You’ll then need to input the Motorola G54 5G device information, such as your carrier info, device name, model, and country/region in order to ensure you’re downloading and repairing the correct firmware to your phone.

Step #3 Now you’ll need to put your phone into Download Mode to remove the Android bootloop.

For this, you can simply follow the onscreen instructions for both phones with and without home buttons.

Click “Next”, and the software will begin downloading the firmware repair files.

Step #4 Now you can sit back and watch the magic happen!

Make sure your computer stays connected to the internet, and your device stays connected to your computer throughout the entire process. Once the firmware has been downloaded, it will be automatically installed onto your mobile device, removing the boot loop Android error.

You’ll be notified when the process is done and when you can remove your device and start using free from the boot loop Android error!

safe & secure

Part 3: Soft reset to fix Android bootloop issue

When your device is stuck in Android boot loop, it does not necessarily mean that it is bricked. Boot loop might be occurring due to a simpler problem which can be fixed by turning off your device. This sounds like a home remedy for a serious problem but it works and resolves the problem most of the time.

Follow the steps given below to soft reset your device:

Turn the Motorola G54 5G device off and take out its battery.

If you cannot take the battery out, let the phone be off for about 3 to 5 minutes, and then turn it back on.

Simply performing a soft reset on your device can help you if you are looking for solutions for how to fix the bootloop issue. This a very useful method as it does not result in any kind of loss in data and protects all your media files, documents, settings, etc.

In case the Motorola G54 5G device does not turn on normally and is still stuck in the bootloop Android problem, be prepared to use the troubleshooting techniques given and explained below.

Part 4: Boot into Safe Mode to fix Android boot loop

Booting your Motorola G54 5G into Safe Mode is a useful troubleshooting step to fix boot loop issues caused by third-party apps. When in Safe Mode, the Motorola G54 5G device will start up with only essential system apps, and any downloaded apps that might be causing conflicts won’t run. Here’s how you can boot your Motorola G54 5G into Safe Mode to address the boot loop problem:

Step 1: Power Off Your Device

Hold down the power button until it turns off completely.

Step 2: Access Safe Mode

To enter Safe Mode, follow these steps based on your device model:

• For most Android devices: Press and hold the power button to turn on your device. As soon as the manufacturer’s logo appears, press and hold the Volume Down button until the Motorola G54 5G device finishes booting. You should see “Safe Mode” displayed in the bottom left or right corner of the screen.
• Some devices might require slightly different key combinations. Refer to your device’s user manual or perform an online search for the specific method to enter Safe Mode for your model.

Step 3: Observe the Motorola G54 5G device

Once your device has booted into Safe Mode, use it for a while to see if the boot loop issue persists. If the boot loop doesn’t occur in Safe Mode, it indicates that the problem is likely caused by a third-party app.

Step 4: Identify and Uninstall Problematic Apps

Now that you’re in Safe Mode, it’s time to identify the troublesome app. Start by uninstalling recently installed apps one by one until the boot loop problem is resolved. After each uninstallation, restart your device normally to check if the boot loop still occurs. Continue this process until you find the problematic app.

Step 5: Restart Normally

Once you’ve identified and uninstalled the problematic app, restart your device normally to exit Safe Mode. Your Android device should now start up without getting stuck in a boot loop.

By following these steps and using Safe Mode to isolate problematic apps, you can effectively troubleshoot and resolve boot loop issues on your Motorola G54 5G.

Part 4: Factory reset to fix Android bootloop issue

Factory reset, also known as Hard Reset, is a one-stop solution for all your software resulting in issues. Android boot loop being such problem, can be easily overcome by performing a factory reset.

Please note that all your device’s data and settings will be deleted by adopting this method. However, if you have a Google account signed in on your Motorola G54 5G, you will be able to retrieve most of your data once the Motorola G54 5G device turns on.

To factory reset your Android boot loop device, you must first boot into the Recovery Mode screen.

To do this:

Press the volume down button and power button together until you see a screen with multiple options before you.

When you are at the Recovery Mode screen, scroll down using the volume down key, and from the options given, select “Factory Reset” using the power key.

Wait for your device to perform the task and then:

Reboot the phone in Recovery Mode by selecting the first option.

This solution is known to fix the boot loop error 9 out of 10 times, but if you still can’t start your Motorola G54 5G normally, consider using a CWM Recovery to resolve the Android boot loop issue.

Part 5: Use CWM Recovery to fix bootloop on rooted Android

CWM stands for ClockworkMod and it is a very popular custom recovery system. To use this system to solve the boot loop Android error, your Motorola G54 5G must be rooted with CWM Recovery System which basically means CWM must be downloaded and installed on your device.

Furthermore, to use CWM Recovery to fix boot loop on rooted Android devices, follow the steps given below:

Press the home, power, and volume up buttons to launch the CWM Recovery screen.

Note: you might have to use a different combination of keys to enter into Recovery Mode, depending on your device’s model.

Scroll down using” the volume key to select “Advanced”.

Now select “Wipe” and choose to wipe “Dalvik Cache”.

In this step, select “Mounts and Storage” to click on “Wipe” or “Cache”.

Once this is done, make sure to reboot your Motorola G54 5G.

This process with successfully fix the Android boot loop error and not cause any loss of data stored on your device stuck in boot loop.

So the bottom line is that boot loop Android issue may seem like an irreparable error but it can be resolved by carefully following the techniques explained above. These methods not only tell you how to fix the bootloop problem but also prevent it from occurring in the future.

An Android boot loop is a common phenomenon with all Android devices because we tend to tamper with our device’s internal settings. Once the ROM, firmware, kernel, etc are damaged or rendered incompatible with the Motorola G54 5G device’s software, you cannot expect it to function smoothly, hence, the boot loop error occurs. Since you are not the only one suffering from the Android boot loop problem, be rest assured that the ways, given above, to combat it are recommended by users facing similar troubles. So, don’t hesitate and go ahead to try them on.

safe & secure

9 Quick Fixes to Unfortunately TouchWiz has stopped Of Motorola G54 5G

“Unfortunately TouchWiz home has stopped” is the talk of the town due to annoying TouchWiz UI, a front-end user interface developed by Motorola G54 5G. Not to mention, the Motorola G54 5G has borne a whole lot of heat from its agitated users over the years and the reason is pretty much obvious due to the pre-installed bloatware apps and the theme launch “TouchWiz home”. That not just brutally annoys users and eats up a heck of internal storage space but lags up too often due to low speed and stability. As a result users end up with “Unfortunately TouchWiz home has stopped” and “Unfortunately, TouchWiz has stopped”. Apparently, there are several flaws in the design and functioning of this launcher and hence, Touchwiz keeps stopping or becomes unresponsive.

Part 1: Common scenarios when TouchWiz keeps stopping

Here in this section, we will introduce some scenarios that can be blamed for why TouchWiz is not working. Check out the following points:

• More often than not, the TouchWiz keeps stopping after an Android update. When we update our Motorola G54 5G device, the old data and cache usually conflicts with TouchWIz thereby cropping up this mess.
• When you disable some built-in apps, you might get in trouble with TouchWiz. Doing this sometimes can hamper the TouchWiz operation and raise the “**unfortunately TouchWiz home has stopped**” error message.
• Many times installing some third-party apps and widgets can cause this problem. The apps like launchers can be conflicting with TouchWiz home launcher and therefore cease it to work. Also, a glitched widget is responsible for the same i.e. forces stop the TouchWiz.

Part 2: 9 Fixes to “Unfortunately TouchWiz has stopped”

Fix “TouchWiz keeps stopping” by repairing Android system

When your TouchWiz keeps stopping and you aren’t able to proceed further, the best way to handle the situation is to repair the Android system. And the best that can help you to serve the purpose is Dr.Fone - System Repair (Android). It has the ability to fix any sort of Android system issue without any complications. To fix this issue, the tool only takes few minutes of yours and performs smoothly. Moreover, you don’t have to worry if you aren’t tech pro. This tool requires no special technical know-how. Here are the advantages you get with this tool.

Dr.Fone - System Repair (Android)

One click tool to fix “Unfortunately TouchWiz has stopped”

• A very easy tool that fixes problems in just one click
• Provides full support all day all night as well as offers 7 day money back challenge
• Enjoys higher success rate and considered as first tool carrying such amazing functionalities
• Able to fix wide variety of Android issues including app crashing, black/white screen of death
• Fully secured and no harm regarding any virus infection

3,211,972 people have downloaded it

Step 1: Download the Program

The one-click repairing process begins with downloading Dr.Fone from its official website. When it is downloaded, follow the installation steps. Upon successful installation, launch the tool on your PC.

Step 2: Connect your Motorola G54 5G Device

After you open the software, hit on the “System Repair” button from the main interface. With the help of a genuine USB cable, get your Motorola G54 5G phone and connect it with the computer.

Step 3: Choose the Tab

Now, from the next screen, you are supposed to choose “Android Repair” tab. It is given on the left panel.

Step 4: Enter Right Information

Please keep your mobile details handy as you will need them in the next window. You will need to enter the correct brand, model, and country name etc. for better detection of your device.

Step 5: Confirm Actions

This process may result in removing your data hence we strongly recommend you to keep a backup of your data.

Tip: You can use Dr.Fone – Phone Backup (Android) to backup your Motorola G54 5G device in case you’re wondering how.

Step 6: Take your Device in Download mode

You will get some instructions on your screen to keep your device in Download mode. Follow them according to the Motorola G54 5G device you own and hit “Next”. When you do this, the program will detect your device and let you download the latest firmware.

Step 7: Repair Device

Now, when the firmware is downloaded, the program will itself begin to repair your device. Wait and keep the Motorola G54 5G device connected until you get the notification for process completion.

Clear the cache data the TouchWiz

Maximum Android devices are designed to deleted cache data upon getting updated to the newest Android system. However, Motorola G54 5G stands as an exception in such case. And therefore, many times TouchWiz starts stopping right after upgrading. Thus, due to the collection of cache data, TouchWiz can display error. This calls for removing the cache from TouchWiz and run things smoothly. Here is how to do this:

• Tap on “Apps” from the Home screen firstly.
• Launch “Settings” afterwards
• Look for “Applications” and tap on it followed by “Application Manager”.
• When Application Manager gets opened, swipe towards right to get into the “All” screen.
• Now, choose “TouchWiz” and tap “Clear Cache”.
• Now, tap “Clear Data” followed by “OK”.
• Now restart your device.

Please note that this will delete all your Home screens post this method.

Disable Motion & gesture settings

The functions regarding Motions and Gestures can be responsible for why TouchWiz home has stopped in your device. Usually the Motorola G54 5G devices running on Android version less than Marshmallow are prone to encountering this issue. Or the Motorola G54 5G devices having modest specs often fall prey to the issue. When you disable these settings, you might get out of the problem.

Change the Animation Scale

When you use TouchWiz, it may consume higher memory usage for high amount of graphic maintenance. As a result, the “**unfortunately TouchWiz home has stopped**” error might crop up. Taking this into consideration, you should try reconfiguring the animation scale and get rid of the error. Here’s how:

Clear Cache Partition

In case the above steps didn’t figure out the problem, here is the next tip. This method can be counted as one of the most effective one. Because it is able to fix minor issues in Android devices, we recommend you for “**TouchWiz home has stopped**” issue too. Let us know how you can do it:

• Turn off your Motorola G54 5G device.
• Start pressing and holding “Volume Up” and “Power” buttons simultaneously.
• Keep doing this until you see the Android screen. This will take your device into recovery mode.
• You will observe some options on the screen. Take help of Volume buttons, scroll down to choose “Wipe Cache Partition”. Press Power button to confirm and the Motorola G54 5G device will be rebooted.

Check now if the error is eliminated. If unfortunately not, please try the following solution.

Enable the easy mode

For some users, enabling Easy Mode has been of great assistance. This feature aims to make the user experience more efficient by simply eliminating complex features. The Easy Mode removes those features that confuse the users by messing up the screen. Hence, we suggest you to switch to this mode in order to remove “**TouchWiz not working**” problem. The steps are:

• Open “Settings” and go to “Personalization”.
• Hit on “Easy Mode” now.

Hope the TouchWiz won’t keep stopping error does not pop up anymore!

Boot your phone to safe mode

Here is the next solution to be followed when TouchWiz keeps stopping. As we already said, third-party apps can cause this issue, booting your device in the Safe mode will disable those apps temporarily. Hence you need to boot your Motorola G54 5G device to Safe mode and check if the reason is any third-party app.

• Switch off your device to initiate.
• Press “Power” button and keep doing this until device’s logo appears on the screen.
• When you see logo appearing, instantly release the button and start holding “Volume Down” button.
• Keep holding until rebooting finishes.
• You will now witness “Safe mode” on the bottom screen. You can now release the button.

Reset Factory settings

If the above method went futile and you’re still at the same place, then factory reset is the next logical step to be taken. We suggest this method because it will take your device to its factory state. As a result, TouchWiz will probably get normal and work perfectly.

Along with this, we would also suggest you go take backup of your data so that you won’t lose any of the personal information from your device after performing factory reset. For your convenience, we have stated the backup steps too in the following guide. Have a look:

• Run “Settings’ in your device and go to “Backup & Reset”.
• Notice if “Back up my data” is enabled or not. If not, turn it on and create backup.
• Now, scroll for “Factory Data reset” option and confirm it by clicking “Reset Phone”.

• Wait a few minutes and your device will reboot.

Install a new launcher to replace TouchWiz

We believe that you will find the above methods helpful. However, if still in case your TouchWiz is not working, we advice you that you should install a new theme launcher in your device. It will be a wise option to ditch TouchWiz in such scenario rather than tolerating the problem. Hope this advice will help you.