How to Resolve Tecno Spark 20C Screen Not Working

Nothing is more frustrating than your phone’s touch screen becoming unresponsive. Given the importance of smartphones in daily work, a phone with a touch screen not working can badly affect your routine. It is an issue found in most smartphone brands, even among Tecno Spark 20C phones, known for their efficient performance. If your Tecno Spark 20C screen is not working, it can be an exhausting experience.

Luckily for your, multiple ways are available to resolve this issue. This article will list six fixes for resolving the Tecno Spark 20C not working issue. It will also discuss the reasons behind this issue in detail and provide a list of tips to avoid it in the future.

Part 1: What Causes Tecno Spark 20C Screen Unresponsive?

Answering what causes Tecno Spark 20C screen unresponsiveness is difficult. Many reasons, ranging from minor bugs to serious hardware issues, can cause it. To find out the exact or near exact reason, you will have to review your device’s activity before this issue occurs. You can use the following common reasons behind the Tecno Spark 20C 6T touch screen not working as the basis of your investigation:

1. Touchscreen Calibration

Excessive smartphone use can cause the touchscreen to go out of the required settings. It means until the touch screen is not recalibrated properly, the touch not working issues will continue to pop up.

2. Battery Issue

If your device’s battery is damaged or is at the end of its lifespan, it can cause the touch screen not responding issues. Moreover, the low battery and issue with the charging port can also lead to this problem.

3. Corrupted System Files

The presence of corrupted system files is also a significant cause of such issues. These corrupted files can also lead to serious performance issues on your phone.

4. Conflicting Settings

It is also possible that the conflicting settings in your device are causing this issue. These settings can range from touch sensitivity to screen refresh rate. Unless these conflicts are removed, the touchscreen performance will continue to degrade.

Part 2: The Common Solutions to Solve a Tecno Spark 20C Screen Unresponsive

Fixing the Tecno Spark 20Cscreen not working is easy as long as it is not a serious hardware issue. While there are multiple ways to solve this problem, we have chosen the 6 most common and easy solutions. Listed below are the 6 common solutions to solve a Tecno Spark 20C screen unresponsive:

Solution 1. Restart the Tecno Spark 20C Phone

As with any other issue or device, the first fix you should always try first is to restart your device. It is the best solution to fix the Tecno Spark 20C not working issue if temporary bugs and glitches are the reason behind it. When you restart your device, it flushes out all temporary bugs and glitches while resetting your device’s processes. Use this guide to restart your Tecno Spark 20C device:

Instruction: Press and hold the “Power” button for a couple of seconds until it turns off. Wait a few moments and then use the “Power” button to turn on the Tecno Spark 20C device. In some of the Tecno Spark 20C devices, you also have to use the “Volume Down” button along with the “Power” button to restart the Tecno Spark 20C device.

Solution 2. Check the Charging Port and Battery

The issues with the battery of your Tecno Spark 20C 5 can also lead to Tecno Spark 20C not working. It can be due to your device’s low or near-empty battery. While in some cases, serious issues with the battery can also be behind this problem. Similarly, the reason behind your phone’s touch not working can be charging port issues.

Thus, you should check and clean your device’s charging port and see if it resolves the problem. Moreover, turn off your device, charge it, and then restart it to check if the touch screen not working issue is gone.

Solution 3. Contact the Tecno Spark 20C Customer Support

Contacting Tecno Spark 20C customer support can also help resolve the Tecno Spark 20C screen not working problem. It is especially helpful if you are unable to find the cause and want to seek an expert opinion. The Tecno Spark 20C customer support will help you find the issue and recommend a solution.

It is an excellent option if your Tecno Spark 20C device’s touch is not working due to hardware issues. They can help guide you to a suitable service center to fix your phone and resolve this issue.

Solution 4. Wipe the Cache of Your Tecno Spark 20C Device

A common reason for Tecno Spark 20C Nord being stuck on the loading screen is the filled cache partition. If you do not clean out the cache partition of your Tecno Spark 20C device, its performance will degrade. As a result, your device will experience issues like the touch screen not working or getting stuck at the loading screen. Here is how you can clear the cache of your Tecno Spark 20C device:

Step 1: Turn off your device by pressing and holding the “Power” button. Once it is turned off, press and hold the “Power” and “Volume Down” buttons until you see the Tecno Spark 20C logo.

Step 2: Now, enter your phone’s PIN or pattern and choose a language. After selecting the language, choose “Wipe data and cache.”

Step 3: Select “Wipe cache” on the next screen and confirm the action through “Yes” in the ensuing window. Once the process is complete, choose “Reboot” to restart your device.

Solution 5. Reset to Factory Settings

Sometimes, clearing the cache partition doesn’t help resolve the touchscreen issue. In that case, You have to factory reset your Tecno Spark 20C device. It is the best and last solution if other fixes haven’t worked and you can’t pinpoint the reason. Factory resetting your Tecno Spark 20C will delete all phone data. Thus, you should create a proper backup before trying this fix. Follow these steps to factory reset your Tecno Spark 20C in no time:

Step 1: Launch Settings on your Tecno Spark 20C device and tap “System” to select “Reset Options.”

Step 2: In the “Reset Options,” select “Erase all data (factory reset)” and confirm the action by again pressing “Erase All Data.” It will start the factory reset process.

Solution 6. Replace the Old Screen with A New Screen

If none of the above-mentioned fixes have worked so far, you should replace the touch screen. Replacing the touch screen is recommended in case of hardware and severe software issues. However, it can be quite an expensive fix as new touch screens aren’t cheap. The prices for new touchscreens differ depending on the model. These prices start from $20 and go up to hundreds of dollars.

Part 3: How to Avoid Tecno Spark 20C Screen being Unresponsive?

Protecting your Tecno Spark 20C device against system issues like touch not working is not difficult. While it is true that you can’t 100% avoid such problems, the risks can still be reduced to a great extent. To prevent your Tecno Spark 20C screen from being unresponsive, here are some tips you can follow:

****Regular Updates:****You should always ensure that your Tecno Spark 20C device runs on the latest software version available. It can help prevent bugs or glitches that might cause the screen to become unresponsive.
****Device Protection:****It is also essential that you use a good quality phone case and screen protector. These will protect your Tecno Spark 20C device from physical damage. Drops, bumps, or scratches can damage the screen and make it unresponsive.
****Delete Unnecessary Apps:****If you have too many apps on your Tecno Spark 20C devices, it can cause screen unresponsiveness issues. Thus, you should only install the apps you need and delete the apps that are no longer needed.
****Use Dr.Fone 13:****Having a professional tool like Fone in your arsenal helps a lot in protecting against system issues. If a system issue is able to pass through, Dr.Fone has the ability to resolve the issue in a matter of seconds. Moreover, it is a complete smartphone tool with data transfer, location changer, and system repair features.

A new version of Dr.Fone is expected to release in the latter half of this month. The new version will include many improvements, advanced features, and increased device support. Furthermore, it will also have a better and more user-friendly interface.

Conclusion

To sum up this article, it can be said that issues like Tecno Spark 20C not working are part of life. These issues can occur anytime and are hard to completely protect against. Thus, having a problem solver like Wondershare Dr.Fone is the best choice. It will not only help you safeguard against system issues but also resolve them if they occur.

How To Restore a Bricked Tecno Spark 20C Back to Operation

In moments of lag or freezing on your Android, you might brick Your Tecno Spark 20C, which can be unsettling. This is more than just the loss of a device. A bricked cell phone also involves potential data erasure. Yet, it’s crucial to understand the true implications of a bricked phone. This page tackles how to address the issue of a bricked Android phone.

This comprehensive guide aims to the reasons behind Android phones becoming bricked. By reading below, you’ll learn effective methods to unbrick a mobile phone without the risk of data loss.

Part 1. What are Brick Phones: At a Glance

The term “bricked phone“ is used when a device becomes non-functional. This is typically due to a critical software or firmware error. There are two distinct scenarios for encountering a bricked phone: a soft brick and a hard brick.

Soft Brick. A soft brick entails a phone that’s not operational due to software glitches or conflicts but is not irreparable.
Hard Brick.A hard brick signifies a more dire situation. This is where the phone becomes inoperable, resembling an actual brick in terms of functionality.

The Common Causes of a Cell Phone Bricking

Below are the common causes why a cell phone bricks.

Failed Updates

When a firmware or system update fails, it can lead to a bricked phone. Updates involve intricate changes to the phone’s software. If interrupted or incompatible, the Tecno Spark 20C device may get stuck in a state of partial functionality. This can result in a soft brick.

Failed Flashing

Flashing involves installing custom firmware or software onto a device. If the flashing process is interrupted or if the firmware used is not compatible with the Tecno Spark 20C device’s hardware, it can cause a hard brick. The device’s essential software components may become corrupted, rendering the phone unusable.

Rooting

Rooting, which grants users superuser access to their device’s OS, can lead to bricking if not done right. Rooting often involves making deep system changes, and errors can disrupt the phone’s core functionality.

Installing Bad Apps

Installing malicious, incompatible, or poorly coded apps can lead to a soft brick situation. In severe cases, they can trigger a boot loop or render the phone unresponsive.

Others

Several less common factors can also contribute to bricking. Overclocking, attempting to modify the bootloader, or tampering with system files can lead to disastrous consequences. Hardware issues, such as faulty memory or battery problems, might also manifest as bricked devices.

Part 2. Unbricking Methods and Tools

Below are solutions that you can employ to fix various brick phone scenarios.

Reverting Android Device to Factory Defaults (Soft Brick)

A universal approach to trying to recover a brick phone exists for all Android phones. This is, consider restoring your device to its factory settings. You can find instructions specific to your phone model online. Although this procedure erases all your data, it’s possible to regain the use of your brick phone.

Get in Touch With the Manufacturer (Hard Brick and Soft Brick)

Normally, smartphone warranties span from 1 to 2 years. If your phone remains unrooted and falls within that coverage period, consider reaching out to the manufacturer. This direct approach could lead to your phone being repaired or replaced with a new one at no cost to you.

Seek Professional Assistance (Hard Brick and Soft Brick)

When your phone falls outside the warranty coverage, consider seeking help from a reputable repair shop. However, be aware that any lost data cannot be attributed to their efforts. Fortunately, you can recover lost data using reliable data recovery software once your phone is operational again.

Use a Dedicated App To Fix Bricked Mobile Phones (Hard Brick and Soft Brick)

Among the array of tools designed for unbricking and recovery, one standout is Wondershare Dr.Fone - System Repair (Android). With an exceptional recovery rate, it stands out as one of the top contenders for data retrieval. Its performance is notable when applied to modern brick phones, making it a highly effective choice for these devices.

Part 3. Unbricking Mobile Phones With Dr.Fone - System Repair (Android)

Dr.Fone - System Repair (Android) empowers you to resolve a range of prevalent Android problems. This Android repair tool eliminates the need to hunt for suitable firmware to flash your phone. By utilizing Dr.Fone – System Repair (Android), you can recover data on Your Tecno Spark 20C with a few clicks.

safe & secure

4,039,461 people have downloaded it

Key Features

Below are some of the standout features of Dr.Fone - System Repair (Android)

Address Android Challenges Like a Professional

From common scenarios like black screens and boot loops to even bricked Android devices, this tool has you covered. Dr.Fone has simplified the process so that anyone can fix Android problems.

Support for Over 1000 Android Models

This software is designed to fix glitches including most modern Android devices. Whether your Tecno Spark 20C is an unlocked variant or tied to carriers, you can restore it back to normal in just a matter of minutes.

Trial Access at No Cost

Dr.Fone - System Repair (Android) offers free access for you to test the initial steps and verify device compatibility. This cost-effective feature ensures value for money every step of the way.

Main Advantages of Using Dr.Fone – System Repair (Android)

Dr. Fone – System Repair (Android) is a great solution with numerous tools to help you manage your Tecno Spark 20C in various ways. Here are some of the advantages of using the app for fixing bricked phones.

Fone – System Repair (Android) comes with a clean UI making navigation and usage easy. The user-friendly design offers a seamless experience for beginners and professionals alike.
Utilizing the app for system repair is an effortless and speedy process. It doesn’t take up much time to revive your bricked phoneso you can use it right away.
The System Repair toolkit only needs you to click on a few buttons. Combined with its clean UI and speedy process, using the app is a breeze.

Part 4. How To Revive a Bricked Phone Using Dr.Fone – System Repair (Android)

Below are the steps to recover data on a bricked mobile phone.

Step 1: Download and install Dr.Fone – System Repair (Android) on your computer. Launch the app and select System Repair. Next, choose Select Android as the Tecno Spark 20C device type. Then, connect to your Tecno Spark 20C. Choose Phone Brick as the Android problem and click Start.

Step 2: Select the correct device information. Choose the Brand, Name, Model, Country, and Carrier. Tick the box next to I agree button and click Next to proceed to the next step.

Step 3: Click on the Phone with Home button or Phone without Home button depending on your device. Follow the on-screen instructions and click Next to proceed with reviving your brick phone.

Step 4: Once the Tecno Spark 20C device enters Download Mode, the firmware will automatically start downloading. Follow the on-screen prompts and wait for the system to initiate the repair process. Once it concludes, the completion message will appear on the main window. Click Done to close the tool or click Try again to repeat the process.

safe & secure

4,311,328 people have downloaded it

Conclusion

Fixing a bricked phone may seem daunting, but solutions are within reach. This page explained the distinctions between soft and hard brick scenarios. It also identified common causes and revealed effective methods for unbricking.

Among these, Dr.Fone – System Repair (Android) emerges as a dependable ally. The tool offers a comprehensive toolkit for recovery and data rescue. The power to reclaim lost data lies in your hands. Act, follow the methods outlined, and recover your brick phone.

6 Fixes to Unfortunately WhatsApp has stopped Error Popups On Tecno Spark 20C

Ever seen a wheel going on without cog? Similarly, WhatsApp has become the cog of our lives. Be it in the professional era or personal (gossips, oomph) stuffs, it is a crucial engaging kind of application. WhatsApp is the slow poison yet a useful tool used worldwide after call logs or messages. Imagining a day without is enough to put someone off. And if one has recently faced a problem in WhatsApp crashing or not opening, then it is enough to give a heart break. It can be due to Cache memory piled up, storage running out of space, WhatsApp components getting corrupted. In such a case, resolving the problem by using an effective solution is very important! Don’t worry and wander as we will provide impeccable range of fixes to bid bye to WhatsApp stopping problem.

You should start fixing the WhatsApp crashing issue with fixing the Android firmware. This is because the Android firmware components are many times the hidden culprit behind the problem of why a particular app stops working. And to fix these components in one click, you need Dr.Fone - System Repair (Android). It is one of the safest tools around in the market and works efficiently with Android system issues. It promises to bring your device back to normal and healthy state. Here are the benefits you get with this amazing tool.

Dr.Fone - System Repair (Android)

Android repair tool to fix firmware component issues

Fixes all kinds of Android system issues with ease
Supports 1000+ Android device in a hassle-free way
Really easy to use and free from any virus infection
One needn’t to be a tech pro to use this tool
Can be downloaded for free and repairs the Tecno Spark 20C device in few easy steps

4,388,871 people have downloaded it

Step 1: Download Dr.Fone Tool

To start repairing, go to the official website of Dr.Fone - System Repair (Android) and download it. Install it and then open the tool on your PC. To proceed, look for the “System Repair” tab and click on it.

Step 2: Choose the Right Tab

As the next step, you need to take the help of USB cable and then plug your device to the computer. Once connected appropriately, make sure to click on the “Android Repair” tab from the left panel.

Step 3: Enter Details

Next will be the information screen. Simply enter the model, brand and other details. Check everything once and click on “Next”.

Step 4: Enter Download Mode

Subsequently, you need to go along with the onscreen instructions. This will boot your device in the download mode. The step is necessary to download the firmware. When you follow the steps, you need to click “Next”. The program will then start downloading the firmware.

Step 5: Repair Android

Now, you just have to sit back and relax. The program will begin to repair your device. Wait until you get the notification for completion.

Cause 2: Cache conflict

The purpose of Cache in a device is to keep the track of frequently used data and information of an application. And when there are the files or data that are corrupted in the cache, this might raise the “Unfortunately WhatsApp has stopped” error. Therefore, you need to clear the WhatsApp data if the above method went futile. Here are the steps.

Open “Settings” and go to “App Manager” or “Apps & Notifications” or “Applications”.
Now, from the list of all applications, choose “WhatsApp”.
Click on “Storage” and tap “Clear Data”.

Cause 3: WhatsApp components corruption

A lot of times, the WhatsApp crashes due to the corrupted components of WhatsApp. In such case, all you need to do is uninstall and install the WhatsApp again. This is how you do it.

Uninstall the app right away from your Homescreen or from the “Settings” > “Applications” > “All” > “WhatsApp” > “Uninstall” (for some phones).
Go to “Play Store” and search “WhatsApp” on the search bar.
Tap on it and start downloading followed by installing it.

Cause 4: Not Enough Storage on your Phone

Insufficient storage could be the other reason why for your WhatsApp has stopped. When your device starts running out of space, some apps may not be able to operate properly for their functions take up space in the Tecno Spark 20C device. And probably WhatsApp is one of them. If the space is the case with you, we suggest you the following two things to go with.

Firstly, go to Settings and check the storage. Make sure it is enough i.e. at least 100 to 200MB.
Secondly, start eliminating the apps that are no longer needed. This will indeed create more space in your device and will let your WhatsApp wok properly.

Cause 5: Gmail Account no longer valid or hacked

It is a well-known fact that Android device and Gmail account go hand in hand. To run the Tecno Spark 20C device smoothly, it is always asked to enter your Gmail address for further configurations. And when WhatsApp stops on your device, the reason might be your Gmail account. Most probably it is not valid now or maybe hacked. If this is the case, we suggest you to log out and log in with some another Gmail account.

Log out by opening “Settings” and tap on “Accounts”.
Choose your Google account and tap on “REMOVE ACCOUNT”.

Now, you can login again and check if WhatsApp works or not.

Cause 6: WhatsApp Incompatible with your Android Phone

If still nothing works and your WhatsApp keeps stopping, most likely the reason is the incompatibility of your WhatsApp with your device. In such case, the thing that comes to your rescue is mod WhatsApp version like GBWhatsApp. It is a mod app which is similar to WhatsApp but in a more modified way. With this, a user gets more functionalities and customizable settings when compared to WhatsApp.

If you’re wondering how you can find this app and install, you should keep reading.

To find GBWhatsApp:

Since you can look for this mod app on the Play Store, here are some of the other secure places from where you can download apk file for this GBWhatsApp. Note down these websites to get GBWhatsApp downloaded if WhatsApp has stopped.

Latest Mod APKs
UptoDown
Android APKs Free
Soft Alien
OpenTechInfo

To Install GBWhatsApp:

Now that you have decided where to download the apk file, these are the following steps that you should follow to install it on your phone. Please have a look:

Firstly, open “Settings” on your device and go to “Security”. Turn the “Unknown Sources” option. Doing this will let you install the apps from other locations than Play Store.

Using the browser on your phone, download the app from any of the aforementioned website.
Launch the GBWhatsApp apk and follow the onscreen instruction in order to install. You need to go in a similar way as you do in mormal WhatsApp app.

Simply proceed with entering your name, country and contact number. The app will verify your account. You are now ready to use this app.

Fix Guide

How to Resolve Tecno Spark 20C Screen Not Working | Dr.fone