How To Revive Your Bricked Lava Blaze 2 Pro in Minutes

Lava Blaze 2 Pro has established a notable presence within the custom development arena. This trait holds for Lava Blaze 2 Pro. Today, it’s still one of the most popular budget smartphones available. The popular smartphone offers the freedom to flash custom ROMs, attain administrative privileges, access countless customization options, and much more.

Yet, delving into these capabilities comes with its share of risks. The potential for your Lava Blaze 2 Pro to brick is high if you don’t know what you’re doing. This page teaches you how to unbrick your Lava Blaze 2 Pro if it happens.

Part 1. Potential Causes of a Lava Blaze 2 Pro Becoming Bricked

The factors that lead to your Lava Blaze 2 Pro to brick vary. The possible solutions also depend upon the underlying causes. At times, the manufacturer’s intervention remains the only viable remedy. Below are the most frequent causes of bricking.

The presence of malicious malware can harm your Lava Blaze 2 Pro. This can result in a ‘bricked’ state devoid of functionality.
Altering the bootloader, system partition, or other critical software components risks triggering a bricking event.
Bricking can also occur due to errors during the update process. Whether through automatic or manual downloads, any interruption during software updates can cause your Lava Blaze 2 Pro to brick.
Using inappropriate methods when performing root access can also result in bricking. Performing root access is dangerous as it grants entry to the Lava Blaze 2 Pro device’s root directory housing the operating system.

Every Android device is susceptible to experiencing a system failure that leads to a bricked state. The risk remains consistent whether your device is from Lava Blaze 2 Pro, Lava Blaze 2 Pro, Lava Blaze 2 Pro, or any other brand. That’s why it’s strongly advised against modifying their smartphones, especially when you don’t know what you’re doing.

Part 2. Techniques To Unbrick a Lava Blaze 2 Pro

When faced with a bricked Lava Blaze 2 Pro, below are various techniques to revive it. Whether through software resets or hardware interventions, these methods can help breathe life back into your device.

Discharge the Battery

A particular suggestion involves allowing the Lava Blaze 2 Pro device’s battery to discharge fully, enabling proper functionality of the Flash Tool software. This process typically spans a few days and is recommended by some specialists.

Perform a Factory Reset

Accessing the Lava Blaze 2 Pro device settings is impossible if your Lava Blaze 2 Pro bricks. For this reason, it is recommended to enter Recovery Mode. Here’s how.

Step 1: Press and hold the Power button and select the Restart option. During the reboot, press the Volume Up and Power keys simultaneously.

Step 2: The main menu will show three options: Reboot, Wipe Data, and Connect with MIAssistant. Choose Reboot.

Explore Dedicated Software Tools To Fix Bricked Phones

Lava Blaze 2 Pro offers its official software tools, such as the Lava Blaze 2 ProFlash Tool. It’s designed for advanced users familiar with flashing firmware onto their devices. Here’s how.

Step 1: Download and install the Lava Blaze 2 ProFlash Tool .

Step 2: Download the Stock Firmware of Lava Blaze 2 Pro and extract it on your computer. Press and Hold the Power and Volume Down buttons for at least 5-10 seconds to enter Fastboot Mode.

Step 3: Connect your Lava Blaze 2 Pro to the computer using a USB cable. Launch Lava Blaze 2 ProFlash Tool and locate the Firmware you have downloaded on the computer. Click the refresh > flash to begin the flashing process.

Step 4: The SUCCESS result should appear in the Lava Blaze 2 ProFlash Tool once the flashing process is done.

However, if the Lava Blaze 2 ProFlash Tool did not unbrick your Lava Blaze 2 Pro, consider using Wondershare Dr.Fone - System Repair (Android). The platform allows you to unbrick your Lava Blaze 2 Pro with a few clicks.

Part 3. Reviving Your Lava Blaze 2 Pro Using Wondershare Dr.Fone - System Repair (Android)

Dr.Fone - System Repair (Android) equips Lava Blaze 2 Pro users with the ability to tackle soft brick and hard brick issues. This specialized Android repair tool enables you to restore your Lava Blaze 2 Pro through a streamlined process, requiring just a few simple clicks.

safe & secure

3,227,773 people have downloaded it

Key Features

Dr.Fone - System Repair (Android) offers several benefits to unbrick your Lava Blaze 2 Pro easily. Below are its key features.

Fix Common Lava Blaze 2 Pro Problems in Minutes. This tool provides comprehensive solutions for common issues like black screen, Play Store not working, boot loops, or even bricked Android devices .
Compatibility with Over 1000 Android Models. This app fixes glitches across modern Android devices. The software is compatible with an extensive range of models. Whether your Lava Blaze 2 Pro is unlocked or carrier-bound, restoration is not a problem.
Unparalleled Software Flexibility. Dr.Fone - System Repair (Android) also boasts an added capacity to mend iOS devices. This versatile tool is your all-inclusive solution for mobile devices, ensuring convenience whether you own an iOS or Android device.

Advantage of Dr.Fone - System Repair (Android) for Unbricking Lava Blaze 2 Pro

Here are three benefits to choosing Dr.Fone - System Repair (Android) for unbricking a Lava Blaze 2 Pro. You’ll further believe Dr.Fone is a reliable assistant when reviving your bricked Lava Blaze 2 Pro.

Simplified Firmware Management

Dr.Fone eliminates the tedious search for appropriate firmware when unbricking your Lava Blaze 2 Pro. The platform automatically downloads the correct firmware for your device. The hassle of identifying and manually procuring firmware is removed, saving time and ensuring a smoother unbricking process.

User-Friendly Approach

One of Dr.Fone’s key strengths is its user-friendly design. It caters to users with varying levels of technical expertise by employing a step-by-step process. This approach guides users through the repair process with clarity. It reduces the requirement for advanced technical knowledge.

Free Version for Evaluation

Dr.Fone - System Repair (Android) offers a free version for everyone. It allows users to test its capabilities before committing to a purchase. This trial version grants users the opportunity to assess the tool’s effectiveness and suitability for unbricking their Lava Blaze 2 Pro. This instills confidence before investing in a full license.

How To Unbrick Lava Blaze 2 Pro Using Dr.Fone - System Repair (Android)

Dr. Fone’s features are perfect for unbricking Lava Blaze 2 Pro devices. Below are the procedures to restore your Lava Blaze 2 Pro from its bricked state.

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

Fix your Android to normal, no skills required.
Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
The high success rate in resolving Android system issues.
Compatible with a wide range of Android devices and OS versions
User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

Step 1: Download and install Dr.Fone - System Repair (Android) on your computer. After launching the application, click System Repair. Then, click Android as the Lava Blaze 2 Pro device type. Connect your Lava Blaze 2 Pro. Indicate Phone Brick as the Android issue and initiate the process by clicking Start.

Step 2: Select the appropriate device information corresponding to your Lava Blaze 2 Pro. Choose Brand, Name, Model, Country, and Carrier. Confirm by checking the I agree button, then proceed to the next step by clicking Next.

Step 3: Given that the Lava Blaze 2 Pro lacks a Home button, click the Phone without Home button option. Follow the prompts displayed on-screen and proceed by clicking Next to initiate the process of restoring your bricked phone.

Step 4: As your Lava Blaze 2 Pro enters Download Mode, the firmware download will start automatically. Follow the on-screen instructions. Wait for the system to initiate the repair procedure automatically. Upon completion, a message will pop up on the main window. Click Done to exit the tool. You can click Try again to repeat the process if needed.

You May Also like:

How To Fix iPhone Bricked After iOS 17/iOS 16/iOS 15 Update
How to Fix It If Your Lava Blaze 2 Pro Phone Got Bricked?

Conclusion

Don’t let a bricked Lava Blaze 2 Pro stand in your way. Use the array of techniques from basic troubleshooting to advanced software tools to breathe life back into your device. Unbrick your Lava Blaze 2 Pro to its full functionality using the methods provided or Dr.Fone’s adept assistance.

Lastly, you can still refer to Lava Blaze 2 Pro for repairs. It remains the primary solution in numerous cases. Utilizing your warranty can alleviate the associated costs. Seeking assistance from a specialized technician is also a viable route to consider for a thorough device assessment.

6 Fixes to Unfortunately WhatsApp has stopped Error Popups On Lava Blaze 2 Pro

Ever seen a wheel going on without cog? Similarly, WhatsApp has become the cog of our lives. Be it in the professional era or personal (gossips, oomph) stuffs, it is a crucial engaging kind of application. WhatsApp is the slow poison yet a useful tool used worldwide after call logs or messages. Imagining a day without is enough to put someone off. And if one has recently faced a problem in WhatsApp crashing or not opening, then it is enough to give a heart break. It can be due to Cache memory piled up, storage running out of space, WhatsApp components getting corrupted. In such a case, resolving the problem by using an effective solution is very important! Don’t worry and wander as we will provide impeccable range of fixes to bid bye to WhatsApp stopping problem.

You should start fixing the WhatsApp crashing issue with fixing the Android firmware. This is because the Android firmware components are many times the hidden culprit behind the problem of why a particular app stops working. And to fix these components in one click, you need Dr.Fone - System Repair (Android). It is one of the safest tools around in the market and works efficiently with Android system issues. It promises to bring your device back to normal and healthy state. Here are the benefits you get with this amazing tool.

Dr.Fone - System Repair (Android)

Android repair tool to fix firmware component issues

Fixes all kinds of Android system issues with ease
Supports 1000+ Android device in a hassle-free way
Really easy to use and free from any virus infection
One needn’t to be a tech pro to use this tool
Can be downloaded for free and repairs the Lava Blaze 2 Pro device in few easy steps

4,388,871 people have downloaded it

Step 1: Download Dr.Fone Tool

To start repairing, go to the official website of Dr.Fone - System Repair (Android) and download it. Install it and then open the tool on your PC. To proceed, look for the “System Repair” tab and click on it.

Step 2: Choose the Right Tab

As the next step, you need to take the help of USB cable and then plug your device to the computer. Once connected appropriately, make sure to click on the “Android Repair” tab from the left panel.

Step 3: Enter Details

Next will be the information screen. Simply enter the model, brand and other details. Check everything once and click on “Next”.

Step 4: Enter Download Mode

Subsequently, you need to go along with the onscreen instructions. This will boot your device in the download mode. The step is necessary to download the firmware. When you follow the steps, you need to click “Next”. The program will then start downloading the firmware.

Step 5: Repair Android

Now, you just have to sit back and relax. The program will begin to repair your device. Wait until you get the notification for completion.

Cause 2: Cache conflict

The purpose of Cache in a device is to keep the track of frequently used data and information of an application. And when there are the files or data that are corrupted in the cache, this might raise the “Unfortunately WhatsApp has stopped” error. Therefore, you need to clear the WhatsApp data if the above method went futile. Here are the steps.

Open “Settings” and go to “App Manager” or “Apps & Notifications” or “Applications”.
Now, from the list of all applications, choose “WhatsApp”.
Click on “Storage” and tap “Clear Data”.

Cause 3: WhatsApp components corruption

A lot of times, the WhatsApp crashes due to the corrupted components of WhatsApp. In such case, all you need to do is uninstall and install the WhatsApp again. This is how you do it.

Uninstall the app right away from your Homescreen or from the “Settings” > “Applications” > “All” > “WhatsApp” > “Uninstall” (for some phones).
Go to “Play Store” and search “WhatsApp” on the search bar.
Tap on it and start downloading followed by installing it.

Cause 4: Not Enough Storage on your Phone

Insufficient storage could be the other reason why for your WhatsApp has stopped. When your device starts running out of space, some apps may not be able to operate properly for their functions take up space in the Lava Blaze 2 Pro device. And probably WhatsApp is one of them. If the space is the case with you, we suggest you the following two things to go with.

Firstly, go to Settings and check the storage. Make sure it is enough i.e. at least 100 to 200MB.
Secondly, start eliminating the apps that are no longer needed. This will indeed create more space in your device and will let your WhatsApp wok properly.

Cause 5: Gmail Account no longer valid or hacked

It is a well-known fact that Android device and Gmail account go hand in hand. To run the Lava Blaze 2 Pro device smoothly, it is always asked to enter your Gmail address for further configurations. And when WhatsApp stops on your device, the reason might be your Gmail account. Most probably it is not valid now or maybe hacked. If this is the case, we suggest you to log out and log in with some another Gmail account.

Log out by opening “Settings” and tap on “Accounts”.
Choose your Google account and tap on “REMOVE ACCOUNT”.

Now, you can login again and check if WhatsApp works or not.

Cause 6: WhatsApp Incompatible with your Android Phone

If still nothing works and your WhatsApp keeps stopping, most likely the reason is the incompatibility of your WhatsApp with your device. In such case, the thing that comes to your rescue is mod WhatsApp version like GBWhatsApp. It is a mod app which is similar to WhatsApp but in a more modified way. With this, a user gets more functionalities and customizable settings when compared to WhatsApp.

If you’re wondering how you can find this app and install, you should keep reading.

To find GBWhatsApp:

Since you can look for this mod app on the Play Store, here are some of the other secure places from where you can download apk file for this GBWhatsApp. Note down these websites to get GBWhatsApp downloaded if WhatsApp has stopped.

Latest Mod APKs
UptoDown
Android APKs Free
Soft Alien
OpenTechInfo

To Install GBWhatsApp:

Now that you have decided where to download the apk file, these are the following steps that you should follow to install it on your phone. Please have a look:

Firstly, open “Settings” on your device and go to “Security”. Turn the “Unknown Sources” option. Doing this will let you install the apps from other locations than Play Store.

Using the browser on your phone, download the app from any of the aforementioned website.
Launch the GBWhatsApp apk and follow the onscreen instruction in order to install. You need to go in a similar way as you do in mormal WhatsApp app.

Simply proceed with entering your name, country and contact number. The app will verify your account. You are now ready to use this app.

Spotify Keeps Crashing: A Complete List of Fixes You Can Use on Lava Blaze 2 Pro

Does your Spotify keep crashing? You’re not alone. This problem is widespread and can happen to anyone. Fortunately, there are ways to rectify it quickly and easily. We’ve prepared a guide to fixing your Spotify crashing problem.

In our guide, you’ll find out why your Spotify keeps crashing. Moreover, you’ll get a list of fixes for your Spotify closing problem and detailed instructions. Once you’ve read our guide, you’ll successfully solve the problem of Spotify crashing on Android.

Part 1. Why Spotify Keeps Crashing

Some people have encountered a problem with their Spotify accounts. Spotify can sometimes keep crashing and closing due to several reasons. For example, it can happen due to your phone not being compatible with the app. This can happen if your operating system isn’t updated to the newest version.

Another reason the Spotify app keeps crashing could be an antivirus or a VPN blocking Spotify from working. Moreover, your device might be out of storage space, causing your phone to slow down and crash apps.

Several other reasons for this problem include network issues, a weak Wi-Fi signal, or the battery saving mode. Furthermore, your apps and files might be corrupted, or an app on your phone might block Spotify from working correctly.

Part 2. Spotify Keeps Crashing: Best Fixes

As you can see, there are numerous reasons for your Spotify crashing. Fortunately, all of them are easy fixes, and there’s no need to worry. We’ve prepared a list of 11 ways to fix your Spotify. With these fixes and detailed instructions, you’ll be able to eliminate your Spotify problem with ease.

1. Fix the Spotify Closing Issue by Repairing Your System

The reason for your Spotify crashing may be more significant than just a bug. Your device system might be behind it. If that’s the case, you might need to repair your system before trying to fix Spotify.

If you want to repair your mobile device’s system quickly and efficiently, try Wondershare Dr.Fone.

Wondershare Dr.Fone is an app that gives you complete control over your phone. You can manage it, back it up, recover files, and repair your system. The system repair option will fix your Android in just a few clicks and allow you to use Spotify freely. The steps go as follows:

Step 1: Install and open Wondershare Dr.Fone on your computer and connect your Android.
Step 2: Go to the Toolbox section and select System Repair.

Step 3: Choose the Android

Step 4: See which Android errors Wondershare Dr.Fone can fix and click Start.

Step 5: Select the **Brand,**Name, Model, Country, and Carrier In the Carrier section, choose OPEN if your device is unlocked.

Step 6: Tick the “I agree with the warning, and I am ready to proceed”checkbox and click Next.
Step 7: Put your Android in Download Mode. You can find the steps below these instructions.
Step 8: The program will automatically download once you put the phone in Download Mode.

Step 9: Once the firmware downloads, click Fix Nowto install it on your Android.

Step 10: Type “000000” in the dialog box and click Confirm.

Step 11: That will start the system reparation, which you can follow on the screen.

Step 12: Once it finishes, click Doneto complete the system repair.

There are two ways to enter Download Mode: one for Android devices with the Home button and another for those without it.

The steps for entering Download Mode on an Android phone with the Home button are as follows:

Step 1: Turn off your phone.
Step 2: Press and hold the Volume Down,Home, and Power buttons simultaneously.
Step 3: Press the Volume Upbutton to enter Download Mode.

The steps for entering Download Mode on Android devices without the Home button are as follows:

Step 1: Turn off your phone.
Step 2: Press and hold the Volume Down, Bixby, andPower buttons simultaneously.
Step 3: Press the Volume Upbutton to enter Download Mode.

2. Force-Close the App

You can force-close Spotify and open it again to make it work properly. That is an easy fix if your Spotify has developed a bug. If that is the case, follow the next steps:

Step 1: Try opening Spotify.
Step 2: If it’s not working, open App Switcher or Recent Apps. Different Android devices open it differently. Thus, you can swipe up from your Home screen, or if you have three buttons at the bottom, press Recent Apps.

Step 3: Find Spotify in Recent Appsand click X or swipe up over it to force-close it.
Step 4: Try opening Spotify again.

The Spotify app may be working fine. Maybe you’re having problems with your Spotify account. If so, you can try logging out and logging in again to see if that works. That isn’t a big problem; sometimes Spotify accounts start bugging. You can re-login to your Spotify account by following these steps:

Step 1: Open Spotify.
Step 2: Tap Settingsin the upper right corner.

Step 3: Scroll to the bottom of the settings and tap Log Out.

Step 4: Tap Log In.

Step 5: Enter your login credentials.
Step 6: Tap Loginagain, and you’re in.

4. Restart Your Device

Another way to stop Spotify from crashing can be restarting your Android. The steps may vary slightly depending on the Lava Blaze 2 Pro device, but they’re mostly the same. Follow these steps to restart your device:

Step 1: Press and hold the Power button(you must press and hold both the Power and Volume Up buttons on a newer Android device).
Step 2: Tap Restart. That will restart your Android, and you can try opening Spotify again.

5. Set Up Your Time and Date

Another possible reason for your Spotify closing problem could be the incorrect time and date on your Android. That is also an easy fix; you must set it correctly and try opening the app again. Set up your time and date with these steps:

Step 1: Open Settingson your Android.
Step 2: Go to Systemor General Management (depending on your Android model).
Step 3: Go to Date and Time.
Step 4: Tap Set Dateand set the correct date.

Step 5: Go to Set Timeand set the right time.

6. Update Your System Software

Your Spotify app might keep crashing because your system is outdated. Try updating it to the latest version to try and fix the crashing problem. The steps for the Android system update are as follows:

Step 1: Open Settings.

Step 2: Go to System or About Phone.

Step 3: Select System Update.
Step 4: If there’s an available update, tap

7. Update Your App

If your system is updated, then Spotify might need an update. The app might malfunction if you’re using an older version. Thus, updating the app might solve the Spotify crashing problem. You can update Spotify by following these steps:

Step 1: Go to the Play Store.

Step 2: Search and open Spotify in the Play Store.
Step 3: Tap Update

8. Free up Storage

Spotify can start crashing if your Android’s storage space is at capacity. That can also cause other apps to crash, not only Spotify. Therefore, check the storage space and free up as much as possible. Follow these steps:

Step 1: Open
Step 2: Go to Device Maintenance > Storageor go directly to Storage.

Step 3: Here, you can see how much of your storage space is available and what’s taking up the most space.

Step 4: Then, you can go ahead and clear as much space as you can.

9. Reinstall Spotify

There’s another solution if the Spotify app keeps crashing. You can try uninstalling and reinstalling it again on your Android. That will reset the app and might solve your problem. Follow the next steps to reinstall Spotify:

Step 1: Find the Spotify app on your Android.
Step 2: Hold the app icon.
Step 3: Then, press Uninstall.

Step 4: Press OK.
Step 5: Then, open the PlayStore and find Spotify.
Step 6: Tap Installto reinstall the app again.

Step 7: Once it installs, log in to test if it’s working.

10. Check if Spotify Is Down

If your Spotify keeps crashing and closing, it might not be your device’s problem. Sometimes, Spotify’s server can be down, and many people face the same issue. If that’s the case, you can check with your friends if their Spotify is working or check online if Spotify is down. To do that, follow these steps:

Step 1: Open your web browser.
Step 2: Type “Is Spotify down” in the search bar.

Step 3: You’ll see several websites that check real-time app servers and if they’re down.

Step 4: Go to one or two and see what they say. If Spotify is down, you’ll need to wait for them to fix the problem.

11. Clear the Cache

When using different apps and websites, your device caches data from those sources. Since there’s no need to pile up your Spotify cache, you can clear it. Follow these steps:

Step 1: Open Settings.

Step 2: Go to Apps.
Step 3: Find Spotify and tap it.

Step 4: Tap Storageor Storage usage.

Step 5: Tap Clear Cache.

safe & secure

Conclusion

If your Spotify app keeps crashing, several reasons might be behind it. For instance, your storage space might be at capacity, your system might need an update, your phone might have a software bug, or the Spotify server might be down.

We’ve given you 11 solutions to fix the Spotify crashing problem. However, if your system needs repairing, you can try Wondershare Dr.Fone for quick and easy repair. This solution and all others will surely help you fix the crashing problem.

Fix Guide

How To Revive Your Bricked Lava Blaze 2 Pro in Minutes | Dr.fone