How To Revive Your Bricked Meizu 21 in Minutes

Meizu 21 has established a notable presence within the custom development arena. This trait holds for Meizu 21. Today, it’s still one of the most popular budget smartphones available. The popular smartphone offers the freedom to flash custom ROMs, attain administrative privileges, access countless customization options, and much more.

Yet, delving into these capabilities comes with its share of risks. The potential for your Meizu 21 to brick is high if you don’t know what you’re doing. This page teaches you how to unbrick your Meizu 21 if it happens.

Part 1. Potential Causes of a Meizu 21 Becoming Bricked

The factors that lead to your Meizu 21 to brick vary. The possible solutions also depend upon the underlying causes. At times, the manufacturer’s intervention remains the only viable remedy. Below are the most frequent causes of bricking.

The presence of malicious malware can harm your Meizu 21. This can result in a ‘bricked’ state devoid of functionality.
Altering the bootloader, system partition, or other critical software components risks triggering a bricking event.
Bricking can also occur due to errors during the update process. Whether through automatic or manual downloads, any interruption during software updates can cause your Meizu 21 to brick.
Using inappropriate methods when performing root access can also result in bricking. Performing root access is dangerous as it grants entry to the Meizu 21 device’s root directory housing the operating system.

Every Android device is susceptible to experiencing a system failure that leads to a bricked state. The risk remains consistent whether your device is from Meizu 21, Meizu 21, Meizu 21, or any other brand. That’s why it’s strongly advised against modifying their smartphones, especially when you don’t know what you’re doing.

Part 2. Techniques To Unbrick a Meizu 21

When faced with a bricked Meizu 21, below are various techniques to revive it. Whether through software resets or hardware interventions, these methods can help breathe life back into your device.

Discharge the Battery

A particular suggestion involves allowing the Meizu 21 device’s battery to discharge fully, enabling proper functionality of the Flash Tool software. This process typically spans a few days and is recommended by some specialists.

Perform a Factory Reset

Accessing the Meizu 21 device settings is impossible if your Meizu 21 bricks. For this reason, it is recommended to enter Recovery Mode. Here’s how.

Step 1: Press and hold the Power button and select the Restart option. During the reboot, press the Volume Up and Power keys simultaneously.

Step 2: The main menu will show three options: Reboot, Wipe Data, and Connect with MIAssistant. Choose Reboot.

Explore Dedicated Software Tools To Fix Bricked Phones

Meizu 21 offers its official software tools, such as the Meizu 21Flash Tool. It’s designed for advanced users familiar with flashing firmware onto their devices. Here’s how.

Step 1: Download and install the Meizu 21Flash Tool .

Step 2: Download the Stock Firmware of Meizu 21 and extract it on your computer. Press and Hold the Power and Volume Down buttons for at least 5-10 seconds to enter Fastboot Mode.

Step 3: Connect your Meizu 21 to the computer using a USB cable. Launch Meizu 21Flash Tool and locate the Firmware you have downloaded on the computer. Click the refresh > flash to begin the flashing process.

Step 4: The SUCCESS result should appear in the Meizu 21Flash Tool once the flashing process is done.

However, if the Meizu 21Flash Tool did not unbrick your Meizu 21, consider using Wondershare Dr.Fone - System Repair (Android). The platform allows you to unbrick your Meizu 21 with a few clicks.

Part 3. Reviving Your Meizu 21 Using Wondershare Dr.Fone - System Repair (Android)

Dr.Fone - System Repair (Android) equips Meizu 21 users with the ability to tackle soft brick and hard brick issues. This specialized Android repair tool enables you to restore your Meizu 21 through a streamlined process, requiring just a few simple clicks.

safe & secure

3,227,773 people have downloaded it

Key Features

Dr.Fone - System Repair (Android) offers several benefits to unbrick your Meizu 21 easily. Below are its key features.

Fix Common Meizu 21 Problems in Minutes. This tool provides comprehensive solutions for common issues like black screen, Play Store not working, boot loops, or even bricked Android devices .
Compatibility with Over 1000 Android Models. This app fixes glitches across modern Android devices. The software is compatible with an extensive range of models. Whether your Meizu 21 is unlocked or carrier-bound, restoration is not a problem.
Unparalleled Software Flexibility. Dr.Fone - System Repair (Android) also boasts an added capacity to mend iOS devices. This versatile tool is your all-inclusive solution for mobile devices, ensuring convenience whether you own an iOS or Android device.

Advantage of Dr.Fone - System Repair (Android) for Unbricking Meizu 21

Here are three benefits to choosing Dr.Fone - System Repair (Android) for unbricking a Meizu 21. You’ll further believe Dr.Fone is a reliable assistant when reviving your bricked Meizu 21.

Simplified Firmware Management

Dr.Fone eliminates the tedious search for appropriate firmware when unbricking your Meizu 21. The platform automatically downloads the correct firmware for your device. The hassle of identifying and manually procuring firmware is removed, saving time and ensuring a smoother unbricking process.

User-Friendly Approach

One of Dr.Fone’s key strengths is its user-friendly design. It caters to users with varying levels of technical expertise by employing a step-by-step process. This approach guides users through the repair process with clarity. It reduces the requirement for advanced technical knowledge.

Free Version for Evaluation

Dr.Fone - System Repair (Android) offers a free version for everyone. It allows users to test its capabilities before committing to a purchase. This trial version grants users the opportunity to assess the tool’s effectiveness and suitability for unbricking their Meizu 21. This instills confidence before investing in a full license.

How To Unbrick Meizu 21 Using Dr.Fone - System Repair (Android)

Dr. Fone’s features are perfect for unbricking Meizu 21 devices. Below are the procedures to restore your Meizu 21 from its bricked state.

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

Fix your Android to normal, no skills required.
Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
The high success rate in resolving Android system issues.
Compatible with a wide range of Android devices and OS versions
User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

Step 1: Download and install Dr.Fone - System Repair (Android) on your computer. After launching the application, click System Repair. Then, click Android as the Meizu 21 device type. Connect your Meizu 21. Indicate Phone Brick as the Android issue and initiate the process by clicking Start.

Step 2: Select the appropriate device information corresponding to your Meizu 21. Choose Brand, Name, Model, Country, and Carrier. Confirm by checking the I agree button, then proceed to the next step by clicking Next.

Step 3: Given that the Meizu 21 lacks a Home button, click the Phone without Home button option. Follow the prompts displayed on-screen and proceed by clicking Next to initiate the process of restoring your bricked phone.

Step 4: As your Meizu 21 enters Download Mode, the firmware download will start automatically. Follow the on-screen instructions. Wait for the system to initiate the repair procedure automatically. Upon completion, a message will pop up on the main window. Click Done to exit the tool. You can click Try again to repeat the process if needed.

You May Also like:

How To Fix iPhone Bricked After iOS 17/iOS 16/iOS 15 Update
How to Fix It If Your Meizu 21 Phone Got Bricked?

Conclusion

Don’t let a bricked Meizu 21 stand in your way. Use the array of techniques from basic troubleshooting to advanced software tools to breathe life back into your device. Unbrick your Meizu 21 to its full functionality using the methods provided or Dr.Fone’s adept assistance.

Lastly, you can still refer to Meizu 21 for repairs. It remains the primary solution in numerous cases. Utilizing your warranty can alleviate the associated costs. Seeking assistance from a specialized technician is also a viable route to consider for a thorough device assessment.

7 Solutions to Fix Chrome Crashes or Won’t Open on Meizu 21

Google Chrome is one of the most popular web browsers in the world. It is fast, secure, and easy to use. However, like any other app, it is not free from errors. Many users have reported that Chrome crashes or won’t open on their Meizu 21. If you are also facing this issue, then you have come to the right place. In this article, we will discuss the reasons behind this problem and provide you with 7 solutions to fix Chrome crashes or won’t open on Meizu 21.

Being one of the widely used browsers, Chrome is always our rescue whenever vital information is our need. Imagine, you launched Chrome for some urgent work and all of a sudden, got “Unfortunately Chrome has stopped” error. You re-opened it thinking about proper functioning of it now but to no avail. Does this situation sound familiar? Are you in a same problem as well? Fret not! We will discuss in this article why your Chrome is crashing on Android and the potential solutions to do away with the problem. Please read the article attentively and know what helps you best.

Part 1: Too many tabs opened

One of the main reasons why Chrome keeps crashing could be the multiple opened tabs. If you keep open the tabs, it may slow down the performance of Chrome and the app will use RAM. As a result, it will obviously get stopped midway. Therefore, we suggest you to close the tabs which are opened. And once you do that, exit the app and then launch it again.

Part 2: Too much memory used

When Chrome or any other app keeps running on the background, issues like “Unfortunately Chrome has stopped” are likely to occur. Moreover, the opened apps will eat the memory of your device. Hence, as the next solution, it is suggested that the Chrome should be closed by force quitting and then you need to try to launch it again to work. See if it works or still Chrome is not responding.

1. Simply tap on the Home button twice to get on the recent apps screen. Please note that the button may vary to reach the screen. Please check once and move accordingly.

2. Now simply swipe the app up/left/right (according to the Meizu 21 device).

3. The app will be force quit now. You can then start it again to check if thing get back to normal.

Part 3: Chrome cache overflowing

While using any app for long, the temporary files for those gets collected in the form of cache. And when cache is not getting cleared, one may face the freezing, crashing or sluggish apps. And this could also be the cause why your Chrome keeps stopping. Hence, the following steps will show you how to clear cache and make Chrome work as before.

1. Open “Settings” and go to “Apps & Notifications”.

2. Look for “Chrome” and tap on it.

3. Go to “Storage” and click on “Clear Cache”.

Part 4: Exclude the issue of website itself

Most probably Chrome is not able to support the website you are trying to access. We doubt if the particular website you are making use of is the culprit and making Chrome keeps stopping. In such case, we would like to recommend you to make use of another browser and try to access the website from there. See if this works or not. If now, please follow the next solution.

Part 5: Android firmware corruption

Another reason why your Chrome has stopped could be the corrupted software. You can’t expect anything normal when your firmware corruption occurs and so in the case of Chrome. If this is the case, the re-flashing the stock ROM is the most recommended solution. And the best that can help you in this is none other than Dr.Fone - System Repair (Android) . Within one click, it vows to help users in flashing the ROM without any complications. Read the advantages offered by this tool.

Dr.Fone - System Repair (Android)

Android repair tool to fix crashing Chrome

It works like a pro no matter what problem your device is stuck with.
More than 1000 types of Android devices are compatible with this tool.
Easy to use and holds higher success rate.
No need for any special technical knowledge to use this
Offers an incredible interface from which anyone can work with.

3,605,074 people have downloaded it

How to Use Dr.Fone - System Repair (Android) when Chrome is crashing on Android

Step 1: Install the Tool to Begin

Start downloading it from there. Install it once downloading is completed and open the tool. The main screen will show you some tabs. You need to hit on “System Repair” among those.

Step 2: Get Android Device Connected

Now, you need to connect your Meizu 21 with the computer using USB cord. When the Meizu 21 device is connected successfully, click on the “Android Repair” option from the left panel.

Step 3: Enter Details

On the following screen, you need to select the right phone brand, name model and enter career details. Check once to confirm and hit on “Next”.

Step 4: Download Firmware

Now, follow the steps displaying on the screen to enter the DFU mode. When you do this, click on “Next” and the program will download the firmware.

Step 5: Repair the Issue

Once the firmware is downloaded, you will notice that the repairing process will start by the program. Wait until it gets finished and try to start Chrome again and you’ll surely get rid of the problem.

Part 6: File Downloading issue from Chrome

While you were trying to download from internet, the file didn’t download properly or it might get stuck and eventually crashing Chrome occurs. In such instances, many times, uninstalling and installing helps. Therefore, follow the steps below to uninstall and install Chrome and fix Chrome keeps stopping

Go to “Settings” and tap on “Apps”.
Select “Chrome” and tap on “Uninstall Updates”.

Now, you need to re-install it from Play Store. From the “My Apps” section, tap on Chrome and update it.

Part 7: Clashes between Chrome and system

Of still you are receiving “Unfortunately Chrome has stopped” pop-up, it might be because of the incompatibility between the Chrome and system. Maybe your device is not updated and therefore is at odds with the Chrome app. So, the last tip that we would like give you is to update your Meizu 21. Following are the steps for it. Follow them and stop the Chrome crashing on Android issue.

Go to “Settings” and tap on “System”/”About Phone”/”About Device”.
Now, choose “Software Update”/”System Update” and your device will detect if there is any update present on your device. Proceed accordingly.

How to Fix It: Meizu 21 Won’t Turn On

Did your Meizu 21 decide to go on vacation and refuses to turn on? If your Meizu 21 won’t turn on for no apparent reason, finding why it failed to power on and the solution for it is not a fun process.

Here, we hope we are able to give you a checklist of reasons behind this issue and the possible steps you can take to rectify it.

Part 1: Common Reasons That Your Meizu 21 Won’t Turn On

If you cannot find any reason why your Meizu 21 will not switch on, here are some possible reasons:

Your Android phone is simply frozen in power-off or sleep mode. In which case, it fails to switch itself on or wake itself up when you initiate it.
Your phone’s battery may be out of charge.
The operating system or installed software is corrupted. The tell-tale sign if this is that if you manage to switch on your Meizu 21, it freezes or crash soon after.
Your device is clogged up with dust and lint causing the hardware to not work properly.
Your power button is broken , which caused it to not be able to trigger the necessary action needed to power up the Android phone. Check to also see if your connectors have no carbon build-up which will cause your phone to not be charged properly.

Part 2: Rescue Data on Android Phone That Will Not Turn On

If you need some help rescuing data from an Android phone that will not turn on, the Dr.Fone - Data Recovery (Android) will be your best friend in your data recovery attempt. With the help of this data recovery solution, you will be able to intuitively recover lost, deleted or corrupted data on any Android devices. Its flexibility and efficiency in rescuing data make it one of the best software out there.

Note: For now, the tool can rescue data from broken Android only if your phone is earlier than Android 8.0, or rooted.

Dr.Fone - Data Recovery (Android)

World’s 1st data retrieval software for broken Android devices.

It can also be used to recover data from broken devices or devices that are damaged in any other way such as those stuck in a reboot loop.
Highest retrieval rate in the industry.
Recover photos, videos, contacts, messages, call logs, and more.
Compatible with Meizu 21 devices.

3981454 people have downloaded it

If your Meizu 21 won’t turn on, here is how you can use the software to recover data:

Step 1: Launch Wondershare Dr.Fone

On your desktop computer or laptop, open Wondershare Dr.Fone. Click on Data Recovery on the left column. Connect your Meizu 21 to the computer using a USB cable.

Step 2: Decide which file types to recover

On the next window, you will need to check the boxes corresponding to the type of files you can recover from a list. You can get back Contacts, Messages, Call History, WhatsApp messages & attachments, Photos, Audio and more.

Step 3: Select the problem with your phone

Opt for “Touch screen not responsive or cannot access the phone” or “Black/broken screen”. Click Next to continue.

Look up for your device – pick the Meizu 21 device Name and Device Model. Advance by clicking on the Next button.

Step 4: Go into your Meizu 21’s Download Mode.

The data recovery tool will guide you on how you can go into your Meizu 21’s Download Mode. You should be getting a step-by-step guide on your computer.

Step 5: Scan the Android Phone.

Using the provided USB cable, attach your Meizu 21 to your computer – the data recovery tool should be able to discover your device automatically and scan it for recoverable data.

Step 6: Review and Retrieve the Data from Broken Android Phone.

Wait for the program to finish scanning the phone – once completed, you will be able to get a list of recoverable files. You can have a preview of the file by highlighting them. Tick the box next to the file name and click on Recover to start retrieving the files and save them in the destination of your choosing.

Part 3: Android Phone Won’t Turn On: One Click Fix

After repeated attempts, when your Android mobile/tablet stops buzzing, what options do you have to revive it?

Well, we would recommend picking Dr.Fone - System Repair (Android) to fix an Android phone will not switch problem. This one-click Android system repair tool resolves every Android system issue without any fuss including Android Phone won’t turn on issue.

Dr.Fone - System Repair (Android)

The real fix to issues like “Android phone will not switch on”

This tool is aptly effective for all the latest Meizu 21 devices.
With a high success rate for fixing Android devices, Dr.Fone - System Repair (Android) ranks at the top.
This is a single click application to fix all Android system issues effortlessly.
It is the first tool to repair all Android system issues in the industry.
It is intuitive and requires no tech expertise to work with.

3981454 people have downloaded it

Prior to fixing the Android phone will not switch and getting things back in action. You need to make sure that you have backed up the Android device . It is recommended that rescuing data from an Android phone by backing up is better than recovering it post the process.

Phase 1: Get the Meizu 21 device ready and connect it

Step 1: Run Dr.Fone on your computer once the installation is complete and tap the ‘Repair’ option form the interface. Now, connect your Android mobile with the computer.

Step 2: You will find a range of options, tap on the ‘Android Repair’ one. Hit the ‘Start’ button so that you can proceed to fix Android Phone won’t turn on hassle.

Step 3: Now, over the Meizu 21 device information window, ensure to feed your exact device details. Press the ‘Next’ button then on.

Phase 2: Enter ‘Download’ mode for fixing your Meizu 21

Step 1: You need to put your Meizu 21 in Download mode for resolving the Android phone will not switch on.

For the Meizu 21 device having ‘Home’ button, you got to switch it off and press ‘Volume Down’, ‘Home’, and ‘Power’ keys for 5-10 seconds at once. Let them go and click on the ‘Volume Up’ button to put your phone in ‘Download’ mode.

For ‘Home’ button-less device, turn the phone/tablet down first. For 5 – 10 seconds, hold down the ‘Volume Down’, ‘Bixby’, and ‘Power’ buttons. Tap on the ‘Volume Up’ button to get into the ‘Download’ mode, after releasing the 3 buttons.

Step 2: Hitting the ‘Next’ key will allow you to download firmware and proceed with the next step.

Step 3: Dr.Fone - System Repair (Android) would verify your firmware download and then take a while to rectify and resolve Android Phone won’t turn on issue.

Part 4: Android Phone Won’t Turn On: Common Fix

To try fixing an Android Phone that won’t turn on, follow these steps:

For any Android devices, remove the battery (considering the battery of your Meizu 21 can be removed) and leave it out for at least 30 minutes. Put back the battery in and try to turn it on.
Press and hold down the Power and Volume Down buttons at the same time for 15-30 minutes to reboot the Meizu 21 device.
Should the first two steps do not work, charge your Meizu 21 to get it out of the start-up loop. You can also opt to use a different battery, just in case your current battery is the source of the problem.
If there are any connected hardware e.g. SD card, remove them from the Meizu 21 device.
Start your Meizu 21 in Safe Mode by pressing and holding down the Menu or Volume Down button on your device.
Should the first five steps do not work for you, perform a hard reset. Do take note that each device will have a different way to do so and that data that is stored locally on the phone will be deleted.
Send your Meizu 21 to the repair shop should none of these steps work.

Part 5: Useful Tips to Protect Your Meizu 21

There are several reasons as to why your Meizu 21 won’t turn on. The problem could be a hardware or software issue which could be prevented. Here are some useful tips to protect your Meizu 21.

I. Hardware

Remember that the components that make your Meizu 21 is sensitive. To protect these components from being damaged, use a good guard casing.
Take apart your Meizu 21 and clean it routinely to avoid dust and lint from clogging the phone and overheating it.

II. Software

It is recommended to download apps from Google Play Store. This way, you can be sure that your app comes from a trusted source.
Read the app’s permission to see which part of the operating system and your personal information that you are giving access to.
Install reliable anti-virus and anti-malware software to safeguard your Meizu 21 from malicious attacks.
Make sure you update your operating system, software and apps to make sure you have the latest version – the developer may have fixed the bugs that have caused problems on Android phones.

It is important to note that your phone contains some important data. Therefore, when your Meizu 21 won’t turn on do not just give up - there are plenty of tools at your disposal to recover back your files and phone.

Fix Guide

How To Revive Your Bricked Meizu 21 in Minutes | Dr.fone