How To Revive Your Bricked OnePlus Ace 2 in Minutes

OnePlus Ace 2 has established a notable presence within the custom development arena. This trait holds for OnePlus Ace 2. Today, it’s still one of the most popular budget smartphones available. The popular smartphone offers the freedom to flash custom ROMs, attain administrative privileges, access countless customization options, and much more.

Yet, delving into these capabilities comes with its share of risks. The potential for your OnePlus Ace 2 to brick is high if you don’t know what you’re doing. This page teaches you how to unbrick your OnePlus Ace 2 if it happens.

Part 1. Potential Causes of a OnePlus Ace 2 Becoming Bricked

The factors that lead to your OnePlus Ace 2 to brick vary. The possible solutions also depend upon the underlying causes. At times, the manufacturer’s intervention remains the only viable remedy. Below are the most frequent causes of bricking.

• The presence of malicious malware can harm your OnePlus Ace 2. This can result in a ‘bricked’ state devoid of functionality.
• Altering the bootloader, system partition, or other critical software components risks triggering a bricking event.
• Bricking can also occur due to errors during the update process. Whether through automatic or manual downloads, any interruption during software updates can cause your OnePlus Ace 2 to brick.
• Using inappropriate methods when performing root access can also result in bricking. Performing root access is dangerous as it grants entry to the OnePlus Ace 2 device’s root directory housing the operating system.

Every Android device is susceptible to experiencing a system failure that leads to a bricked state. The risk remains consistent whether your device is from OnePlus Ace 2, OnePlus Ace 2, OnePlus Ace 2, or any other brand. That’s why it’s strongly advised against modifying their smartphones, especially when you don’t know what you’re doing.

Part 2. Techniques To Unbrick a OnePlus Ace 2

When faced with a bricked OnePlus Ace 2, below are various techniques to revive it. Whether through software resets or hardware interventions, these methods can help breathe life back into your device.

Discharge the Battery

A particular suggestion involves allowing the OnePlus Ace 2 device’s battery to discharge fully, enabling proper functionality of the Flash Tool software. This process typically spans a few days and is recommended by some specialists.

Perform a Factory Reset

Accessing the OnePlus Ace 2 device settings is impossible if your OnePlus Ace 2 bricks. For this reason, it is recommended to enter Recovery Mode. Here’s how.

• Step 1: Press and hold the Power button and select the Restart option. During the reboot, press the Volume Up and Power keys simultaneously.

• Step 2: The main menu will show three options: Reboot, Wipe Data, and Connect with MIAssistant. Choose Reboot.

Explore Dedicated Software Tools To Fix Bricked Phones

OnePlus Ace 2 offers its official software tools, such as the OnePlus Ace 2Flash Tool. It’s designed for advanced users familiar with flashing firmware onto their devices. Here’s how.

• Step 1: Download and install the OnePlus Ace 2Flash Tool .

• Step 2: Download the Stock Firmware of OnePlus Ace 2 and extract it on your computer. Press and Hold the Power and Volume Down buttons for at least 5-10 seconds to enter Fastboot Mode.

• Step 3: Connect your OnePlus Ace 2 to the computer using a USB cable. Launch OnePlus Ace 2Flash Tool and locate the Firmware you have downloaded on the computer. Click the refresh > flash to begin the flashing process.

• Step 4: The SUCCESS result should appear in the OnePlus Ace 2Flash Tool once the flashing process is done.

However, if the OnePlus Ace 2Flash Tool did not unbrick your OnePlus Ace 2, consider using Wondershare Dr.Fone - System Repair (Android). The platform allows you to unbrick your OnePlus Ace 2 with a few clicks.

Part 3. Reviving Your OnePlus Ace 2 Using Wondershare Dr.Fone - System Repair (Android)

Dr.Fone - System Repair (Android) equips OnePlus Ace 2 users with the ability to tackle soft brick and hard brick issues. This specialized Android repair tool enables you to restore your OnePlus Ace 2 through a streamlined process, requiring just a few simple clicks.

safe & secure

3,227,773 people have downloaded it

Key Features

Dr.Fone - System Repair (Android) offers several benefits to unbrick your OnePlus Ace 2 easily. Below are its key features.

• Fix Common OnePlus Ace 2 Problems in Minutes. This tool provides comprehensive solutions for common issues like black screen, Play Store not working, boot loops, or even bricked Android devices .
• Compatibility with Over 1000 Android Models. This app fixes glitches across modern Android devices. The software is compatible with an extensive range of models. Whether your OnePlus Ace 2 is unlocked or carrier-bound, restoration is not a problem.
• Unparalleled Software Flexibility. Dr.Fone - System Repair (Android) also boasts an added capacity to mend iOS devices. This versatile tool is your all-inclusive solution for mobile devices, ensuring convenience whether you own an iOS or Android device.

Advantage of Dr.Fone - System Repair (Android) for Unbricking OnePlus Ace 2

Here are three benefits to choosing Dr.Fone - System Repair (Android) for unbricking a OnePlus Ace 2. You’ll further believe Dr.Fone is a reliable assistant when reviving your bricked OnePlus Ace 2.

Simplified Firmware Management

Dr.Fone eliminates the tedious search for appropriate firmware when unbricking your OnePlus Ace 2. The platform automatically downloads the correct firmware for your device. The hassle of identifying and manually procuring firmware is removed, saving time and ensuring a smoother unbricking process.

User-Friendly Approach

One of Dr.Fone’s key strengths is its user-friendly design. It caters to users with varying levels of technical expertise by employing a step-by-step process. This approach guides users through the repair process with clarity. It reduces the requirement for advanced technical knowledge.

Free Version for Evaluation

Dr.Fone - System Repair (Android) offers a free version for everyone. It allows users to test its capabilities before committing to a purchase. This trial version grants users the opportunity to assess the tool’s effectiveness and suitability for unbricking their OnePlus Ace 2. This instills confidence before investing in a full license.

How To Unbrick OnePlus Ace 2 Using Dr.Fone - System Repair (Android)

Dr. Fone’s features are perfect for unbricking OnePlus Ace 2 devices. Below are the procedures to restore your OnePlus Ace 2 from its bricked state.

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

• Fix your Android to normal, no skills required.
• Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
• The high success rate in resolving Android system issues.
• Compatible with a wide range of Android devices and OS versions
• User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

• Step 1: Download and install Dr.Fone - System Repair (Android) on your computer. After launching the application, click System Repair. Then, click Android as the OnePlus Ace 2 device type. Connect your OnePlus Ace 2. Indicate Phone Brick as the Android issue and initiate the process by clicking Start.

• Step 2: Select the appropriate device information corresponding to your OnePlus Ace 2. Choose Brand, Name, Model, Country, and Carrier. Confirm by checking the I agree button, then proceed to the next step by clicking Next.

• Step 3: Given that the OnePlus Ace 2 lacks a Home button, click the Phone without Home button option. Follow the prompts displayed on-screen and proceed by clicking Next to initiate the process of restoring your bricked phone.

• Step 4: As your OnePlus Ace 2 enters Download Mode, the firmware download will start automatically. Follow the on-screen instructions. Wait for the system to initiate the repair procedure automatically. Upon completion, a message will pop up on the main window. Click Done to exit the tool. You can click Try again to repeat the process if needed.

You May Also like:

How To Fix iPhone Bricked After iOS 17/iOS 16/iOS 15 Update
How to Fix It If Your OnePlus Ace 2 Phone Got Bricked?

Conclusion

Don’t let a bricked OnePlus Ace 2 stand in your way. Use the array of techniques from basic troubleshooting to advanced software tools to breathe life back into your device. Unbrick your OnePlus Ace 2 to its full functionality using the methods provided or Dr.Fone’s adept assistance.

Lastly, you can still refer to OnePlus Ace 2 for repairs. It remains the primary solution in numerous cases. Utilizing your warranty can alleviate the associated costs. Seeking assistance from a specialized technician is also a viable route to consider for a thorough device assessment.

OnePlus Ace 2 Stuck on Screen – Finding Solutions For Stuck on Boot

The market has embraced OnePlus Ace 2 for being the pioneers in the industry. Although the company lacked in providing explicit smartphones, they were still able to catch up with the race. OnePlus Ace 2 C31, known to provide durability of the next level, is taking up the latest shelves of OnePlus Ace 2 smartphones. Although the company promises reliability, there are several problems involving such smartphones.

One prominent solution stated by OnePlus Ace 2 users involves the screen stuck in the boot. If your OnePlus Ace 2 is stuck on the “OnePlus Ace 2” screen for no particular reason, you will have to read this article. As this article tackles all reasons involving the problem, it comes up with the necessary solutions. These solutions will help OnePlus Ace 2 users find solutions for their stuck screens on the boot.

Part 1: What Causes OnePlus Ace 2 Screen Stuck on Boot?

Has your OnePlus Ace 2 recently been stuck on the boot loop screen? If it is happening or has happened to you, there are some reasons that you need to be aware of. Having an overview of the causes of OnePlus Ace 2 being stuck on the Android One screen can help you redirect yourself toward to right solution. Go through the list of all causes and find more about the issue involving screens stuck on boot in OnePlus Ace 2 smartphones:

• The Device is Damped in Liquid

It is entirely possible that your OnePlus Ace 2 smartphone is immersed in water. With a smartphone dipped in liquid, the OnePlus Ace 2 device can turn useless. If you have tried starting it again, it won’t run and might get stuck on the boot.

• Soft-Bricked Device

There are multiple conditions where your OnePlus Ace 2 smartphone can get soft-bricked. It majorly happens when a particular function in the OnePlus Ace 2 device stops working. To counter the problem, it is essential that you can get your device stuck on the boot screen.

• Outdated Device

If the equipment wears out after a certain time, there is a need to have it changed. With such obsolete models of OnePlus Ace 2, you will surely face issues like a screen stuck on the boot. Smartphone equipment cannot be revamped, and you will have to go for newer options.

• Software Update Required

A software update on your OnePlus Ace 2 smartphone might be causing issues with the screen stuck on the boot. The best way to get rid of this problem is to update your system software to the latest version.

Part 2: 5 Solutions To Solve OnePlus Ace 2 Screen Stuck on Boot

Do you seek to resolve the problem of the OnePlus Ace 2 Plus stuck on the Android One screen? There are specific techniques that can be tried as a remedy. These solutions are tried and recommended by experts. Go through the details provided below to solve the issues with your stuck OnePlus Ace 2 screen.

Solution 1: Force Restart OnePlus Ace 2

The first and most proclaimed technique to refresh OnePlus Ace 2 devices under such a problem is to force restart them. If the OnePlus Ace 2 device is stuck, you will have to perform this process by pressing the “Power” and “Volume Up” keys for 15 seconds. Continue holding the buttons until the OnePlus Ace 2 device vibrates or restarts by showing the screen again.

Solution 2: Leave the Phone For a While To Drain Its Battery

A conventional way to solve the issue of a stuck screen in OnePlus Ace 2 is to leave the phone in its position. As you let its battery drain out, the phone will turn off, and you can activate the OnePlus Ace 2 device again by charging it.

Once you restart it this way, all the procedures will initiate again, and the OnePlus Ace 2 device will be as good as new. Draining the battery has given you the leverage to regain control over the OnePlus Ace 2 device again.

Solution 3: Check For Updates on OnePlus Ace 2 Smartphones

Another quick remedy to try on your OnePlus Ace 2 smartphones involves updating their software. If there is any prevailing software update to install on the smartphone, you will have to check and update it by following the steps guided below:

Step 1: Open the “Settings” of your OnePlus Ace 2 smartphone and continue to the “System” section in the list of options. You will have to access the “Advanced” options in the “System” menu.

Step 2: As you lead to the advanced options, look for “System update” in the provided options. Look for the “Check for update” button. This will check if your OnePlus Ace 2 needs any software updates or not.

Solution 4: Using Wondershare Dr.Fone

One of the finest options available to perform is using a third-party platform that promises smooth operability. Wondershare Dr.Fone is a platform designed to provide such smartphones another life to survive. Its unique functionality repairs all the issues with a smartphone and makes it as good as a new one.

If your OnePlus Ace 2 Plus is stuck on the Android One screen, this platform is the ultimate solution for you. With the support of the latest devices and software versions, Dr.Fone – System Repair (Android) offers the best results. To know how to repair your OnePlus Ace 2 smartphone with the help of this tool, look through the steps featured next:

Step 1: Open Dr.Fone and Select System Repair

As you launch Dr.Fone after downloading it on your computer, continue to the “System Repair” option. You will have to start by connecting the Android device to the computer through a USB cable. Select “Android Repair” from the options available and continue to the following options.

Step 2: Define Device Information and Confirm

You will be directed to the OnePlus Ace 2 device information screen, where you must define the identification parameters of the OnePlus Ace 2 device. Select the brand, name, model, country, and carrier details for proper system recovery. On clicking “Next,” you will receive a warning where you will have to type the number “000000” to proceed with the method.

Step 3: Put Your OnePlus Ace 2 in Download Mode

Following this, you will have to put your OnePlus Ace 2 in Download Mode. For that, you need to follow the steps according to the condition of the OnePlus Ace 2 device:

• For Devices with Home Button:

Power off your Android and continue to press and hold the “Volume Down,” “Home,” and “Power” buttons for a few seconds. After holding them for almost 10 seconds, release and press the “Volume Up” button to enter the mode.

• For Devices without Home Button:

Turn off the Android device and hold the “Volume Down,” “Bixby,” and “Power” buttons simultaneously for a few seconds. On releasing the buttons, press the “Volume Up” button to enter Download Mode.

Step 4: Start Downloading and Verify Firmware

To proceed, tap the “Next” button to download the firmware. As you verify the firmware, the repairing process starts on your OnePlus Ace 2 device.

Solution 5: Contact the Customer Service Center of OnePlus Ace 2

If the issue of the OnePlus Ace 2 stuck on the “OnePlus Ace 2” screen continues, you will have to contact the OnePlus Ace 2 device’s customer support. With no proper method left for the OnePlus Ace 2 device, the only effective technique is to visit the authorized store for OnePlus Ace 2 smartphones and claim the issue with the OnePlus Ace 2 device. In this way, you might receive or get a fully repaired device with no additional charges if the OnePlus Ace 2 smartphone is under warranty.

Part 3: How to Avoid OnePlus Ace 2 Screen Stuck on Boot?

What if you come to know that you can avoid the OnePlus Ace 2 screen stuck-on boot problem? There are a set of tips and tricks that you can follow to explain how to prevent such an issue in the first place. Follow these tips to learn more about saving your OnePlus Ace 2 from such miserable conditions:

1. Protect from Malware

The first thing to protect your OnePlus Ace 2 smartphone from getting stuck on the boot is to keep it safe from unauthorized and malicious data. The best thing to keep a device secure is to follow all security protocols and avoid bypassing them. If you try downloading something not authorized by the Play Store itself, for instance, an APK, it can make your device vulnerable to malware.

2. Keep Your Device Updated

If you feel frustrated by issues like OnePlus Ace 2 being stuck on the Android One screen, the best thing to avoid such a problem is to keep your device updated at all costs. Whenever there is an update on your OnePlus Ace 2 smartphone, make sure to install it on time and properly. Do not leave updates uninstalled for no reason, as they can hinder the OnePlus Ace 2 device’s speed and performance.

3. Do Not Fool Around with System Files

Changing or modifying system files can be fatal for smartphones. Thus, to keep your OnePlus Ace 2 safe, you need to keep your hands away from such important files. Modifying a single file can make your device useless or put you in situations like a OnePlus Ace 2 smartphone stuck on the boot. For that, the best tip is to keep yourself out of engagement.

4. Use Wondershare Dr.Fone To Manage All Data With Ease

As you have observed, the power of Dr.Fone can be a perfect phone manager for you at all times. While providing system repair services, it can also help you manage your device’s data and other statuses. Thus, consider keeping Dr.Fone close to your device and its operations. In this way, you will be able to have complete control over all types of data present in the OnePlus Ace 2 smartphone.

safe & secure

4,675,795 people have downloaded it

Conclusion

With that, this brings the article on OnePlus Ace 2 smartphones to a conclusion. If you are still facing issues with your OnePlus Ace 2 stuck on the “OnePlus Ace 2” screen, this article is the perfect solution for your problem.

With all the provided methods, we do hope that you will be able to restore the status of your OnePlus Ace 2 smartphone and make it functional. For the finest results, you have also discovered Dr.Fone – System Repair (Android) as the best solution for repairing such devices.

Reasons for OnePlus Ace 2 Stuck on Boot Screen and Ways To Fix Them

One of the main reasons why people own a phone is for convenience. It will be ironic if that device, supposed to grant convenience, provides problems instead. Some people face this when their Android phone is stuck on the logo page and unable to do anything. As expected, this is common in Android phones and is why people are unhappy with Android phones.

This article will share the possible reasons why your Android phone is stuck on the boot screen. This article will share three possible reasons for this problem and five valuable tips to help fix this issue. If all else fails, we have an application to share and recommend that is guaranteed to solve your problem in no time. Keep on reading to find out more!

Part 1. Why Is Your OnePlus Ace 2 Stuck on the Boot Screen?

There are countless reasons why a problem happens, just like why your Android phone is stuck on the logo page. This section sieved out the top 3 reasons why your Android boot screen happens and some tips to overcome it.

1. Changes to the Software

Android is a flexible operating system. It allows users to customize it in any way they desire, which is Android’s beauty. The customizable nature of the operating system allows users to unlock, root, flash, and tinker. However, this flexibility in customization might be a double edge sword. Accidental tampering with the Android system might result in software problems, such as being stuck on the Android boot screen.

Fortunately, this is not a complicated fix. Android accepts different fixes and allows the system to return to how it once was. Even with software issues, the system does not get completely inoperable. The best way to fix changes to the software is to start from the beginning of the process. This might offer the best chance for you to restore your phone to normal.

Although it is fun to customize and change the software, following trusted sources ensures you do not damage your phone. Having an Android phone stuck on the logo page is one of the many examples of the problems that might happen if changes to the software go out of hand.

2. Android Software Updates

Updates are a common cause of Android phones stuck on the logo. It happened when the update did not complete as it should have been. Several reasons for incomplete updates, such as poor internet connection, the connection between computer and phone being lost, a power cut, the phone freezing, and the list go on. When an update is uncompleted, issues such as being stuck at the Android boot screen and many others might occur.

Before an update starts, your mobile device will notify you of the duration of the update. As a tip, set aside an additional 10-15 minutes on top of the update duration to ensure your update is completed successfully. It will be ideal for activating the software update only when there is sufficient power in your phone or keep it charging during the update.

When an update is disrupted or stopped before it completes, the existing Android version will become corrupted while the new software to be updated is incomplete. This means that your OnePlus Ace 2 has no system to run on. Always complete your software updates, and you will not have the problem of your Android phone getting stuck on the logo.

3. Malfunctioning Applications

If you noticed that your Android phone is stuck on the logo page only after installing certain apps, there is a high chance that the app is not compatible with the existing apps in your phone or with the Android version. When an app conflicts with the Android system or other apps, this will run into problems with your phone.

This problem typically happens when an app is downloaded from a third-party source, not the official Google Play Store. This app from a third-party source might be malicious or contain a virus. This can cause problems such as being stuck at the Android boot screen.

To overcome this, locate the app that has been giving you issues and remove the app from your phone. Restart your device, and you should be able to have your OnePlus Ace 2 functioning properly.

Part 2. 5 Helpful Ways To Fix Android Phones Stuck on Boot Screen

After understanding the common problems on why your Android phone is stuck on the logo page, here are five easy solutions you can try solving at home.

1. Force Reboot

When encountering problems with your OnePlus Ace 2, such as being stuck at the Android boot screen, you should first try a forced reboot. This simple yet effective solution could be what you need to solve all your Android problems. It is essential to leave your device turned off for at least a minute or two before turning it back on.

2. Pull Out Battery

Another way to restart your OnePlus Ace 2 when it is frozen is to try taking the battery out. Android devices are designed with a removable battery, and sometimes you can resolve the issue easily by removing the battery and replacing it after a couple of seconds. Then, turn on your device again and test to see if your Android phone is stuck on the logo page.

If it works, then the problem is solved. However, some Android devices come with a built-in battery. For these kinds of devices, a stimulated battery pull should be attempted. A simulated battery pull is a set of instructions telling your OnePlus Ace 2 to switch off and on again. If your device does not offer the simulated battery pull option, omit this troubleshooting option.

3. Charge Your Device

If your Android phone is stuck on the logo page and not getting past it, no matter how many times you have tried, it may be due to a low battery! As simple as it sounds, plug your device into a power outlet and try restarting your phone. You might be surprised that this simple fix is all it takes to solve your Android problem.

4. Wipe Cache Data

Cache refers to a software or hardware component of an Android device that stores your program and data for reference. This data might result from the daily usage of your device or duplicate data from a different source on the OnePlus Ace 2 device. Similar to a computer, if the cache occupies too much space on your device, it might cause your OnePlus Ace 2 to become slower and eventually get stuck at the Android boot screen.

Wiping out the cache data from your OnePlus Ace 2 could free up more space, allow your device to function faster, and avoid problems such as being stuck at the Android boot screen. Do not worry; wiping the cache data is entirely safe and will not lead to any loss of important data or programs on your phone.

5. Factory Reset

If all the methods above fail, performing a factory rest might be your last option. However, it is important to note that performing a factory reset will erase everything on your phone, including apps, contacts, photos, etc. As a tip, back up all your data from your device before performing a factory reset. That way, you can still retrieve all your precious information after the reset.

Follow the steps below to perform a factory rest on your OnePlus Ace 2:

Step 1: Turn off your phone and press the Power button and Volume Down button at the same time

Step 2: Use the Volume button to scroll the options and highlight Wipe data/factory reset. Press the Power button to begin the factory reset.

Part 3. Bonus Tip: Best App To Solve Android Phone Stuck On Boot Screen

If all the solutions above do not work and you do not want to perform a factory reset on your phone, one option is to use an app called Dr.Fone. It is one of the most effective phone recovery solutions and can help to bring your OnePlus Ace 2 back to a state like it was brand new. Being stuck on the Android boot screen will be a problem of the past.

Refer to the tutorial below to solve your Android phone is stuck on the logo page issue.

Step 1: Download and install Dr.Fone – System Repair (Android) on your computer. Open the application and connect your OnePlus Ace 2 to the computer.

Step 2: Select the issue you face on the next page. If you use a OnePlus Ace 2 phone, select Stuck at OnePlus Ace 2 Logo. Alternatively, you can click on Black Screen or Stuck in Boot Loop.

Step 3: Input the Brand, Name, Model, Country, and Carrier of your phone and click on Next.

Step 4: Follow the instructions provided on the page and wait for the system repair to finish. After which, click on Done to complete the process.

safe & secure

Conclusion

This article summarizes some possible reasons your Android phone is stuck on the logo page. Five useful strategies were shared to easily overcome your OnePlus Ace 2 being stuck in the boot. However, if all the above methods do not work, we recommend trying the Dr.Fone-System Repair.

Dr.Fone-System Repair repairs the operating system issues and fixes the problem with your OnePlus Ace 2. Once you power on your OnePlus Ace 2 again, you can rest assured that it will be like new.