How To Revive Your Bricked Realme 10T 5G in Minutes

Realme 10T 5G has established a notable presence within the custom development arena. This trait holds for Realme 10T 5G. Today, it’s still one of the most popular budget smartphones available. The popular smartphone offers the freedom to flash custom ROMs, attain administrative privileges, access countless customization options, and much more.

Yet, delving into these capabilities comes with its share of risks. The potential for your Realme 10T 5G to brick is high if you don’t know what you’re doing. This page teaches you how to unbrick your Realme 10T 5G if it happens.

Part 1. Potential Causes of a Realme 10T 5G Becoming Bricked

The factors that lead to your Realme 10T 5G to brick vary. The possible solutions also depend upon the underlying causes. At times, the manufacturer’s intervention remains the only viable remedy. Below are the most frequent causes of bricking.

• The presence of malicious malware can harm your Realme 10T 5G. This can result in a ‘bricked’ state devoid of functionality.
• Altering the bootloader, system partition, or other critical software components risks triggering a bricking event.
• Bricking can also occur due to errors during the update process. Whether through automatic or manual downloads, any interruption during software updates can cause your Realme 10T 5G to brick.
• Using inappropriate methods when performing root access can also result in bricking. Performing root access is dangerous as it grants entry to the Realme 10T 5G device’s root directory housing the operating system.

Every Android device is susceptible to experiencing a system failure that leads to a bricked state. The risk remains consistent whether your device is from Realme 10T 5G, Realme 10T 5G, Realme 10T 5G, or any other brand. That’s why it’s strongly advised against modifying their smartphones, especially when you don’t know what you’re doing.

Part 2. Techniques To Unbrick a Realme 10T 5G

When faced with a bricked Realme 10T 5G, below are various techniques to revive it. Whether through software resets or hardware interventions, these methods can help breathe life back into your device.

Discharge the Battery

A particular suggestion involves allowing the Realme 10T 5G device’s battery to discharge fully, enabling proper functionality of the Flash Tool software. This process typically spans a few days and is recommended by some specialists.

Perform a Factory Reset

Accessing the Realme 10T 5G device settings is impossible if your Realme 10T 5G bricks. For this reason, it is recommended to enter Recovery Mode. Here’s how.

• Step 1: Press and hold the Power button and select the Restart option. During the reboot, press the Volume Up and Power keys simultaneously.

• Step 2: The main menu will show three options: Reboot, Wipe Data, and Connect with MIAssistant. Choose Reboot.

Explore Dedicated Software Tools To Fix Bricked Phones

Realme 10T 5G offers its official software tools, such as the Realme 10T 5GFlash Tool. It’s designed for advanced users familiar with flashing firmware onto their devices. Here’s how.

• Step 1: Download and install the Realme 10T 5GFlash Tool .

• Step 2: Download the Stock Firmware of Realme 10T 5G and extract it on your computer. Press and Hold the Power and Volume Down buttons for at least 5-10 seconds to enter Fastboot Mode.

• Step 3: Connect your Realme 10T 5G to the computer using a USB cable. Launch Realme 10T 5GFlash Tool and locate the Firmware you have downloaded on the computer. Click the refresh > flash to begin the flashing process.

• Step 4: The SUCCESS result should appear in the Realme 10T 5GFlash Tool once the flashing process is done.

However, if the Realme 10T 5GFlash Tool did not unbrick your Realme 10T 5G, consider using Wondershare Dr.Fone - System Repair (Android). The platform allows you to unbrick your Realme 10T 5G with a few clicks.

Part 3. Reviving Your Realme 10T 5G Using Wondershare Dr.Fone - System Repair (Android)

Dr.Fone - System Repair (Android) equips Realme 10T 5G users with the ability to tackle soft brick and hard brick issues. This specialized Android repair tool enables you to restore your Realme 10T 5G through a streamlined process, requiring just a few simple clicks.

safe & secure

3,227,773 people have downloaded it

Key Features

Dr.Fone - System Repair (Android) offers several benefits to unbrick your Realme 10T 5G easily. Below are its key features.

• Fix Common Realme 10T 5G Problems in Minutes. This tool provides comprehensive solutions for common issues like black screen, Play Store not working, boot loops, or even bricked Android devices .
• Compatibility with Over 1000 Android Models. This app fixes glitches across modern Android devices. The software is compatible with an extensive range of models. Whether your Realme 10T 5G is unlocked or carrier-bound, restoration is not a problem.
• Unparalleled Software Flexibility. Dr.Fone - System Repair (Android) also boasts an added capacity to mend iOS devices. This versatile tool is your all-inclusive solution for mobile devices, ensuring convenience whether you own an iOS or Android device.

Advantage of Dr.Fone - System Repair (Android) for Unbricking Realme 10T 5G

Here are three benefits to choosing Dr.Fone - System Repair (Android) for unbricking a Realme 10T 5G. You’ll further believe Dr.Fone is a reliable assistant when reviving your bricked Realme 10T 5G.

Simplified Firmware Management

Dr.Fone eliminates the tedious search for appropriate firmware when unbricking your Realme 10T 5G. The platform automatically downloads the correct firmware for your device. The hassle of identifying and manually procuring firmware is removed, saving time and ensuring a smoother unbricking process.

User-Friendly Approach

One of Dr.Fone’s key strengths is its user-friendly design. It caters to users with varying levels of technical expertise by employing a step-by-step process. This approach guides users through the repair process with clarity. It reduces the requirement for advanced technical knowledge.

Free Version for Evaluation

Dr.Fone - System Repair (Android) offers a free version for everyone. It allows users to test its capabilities before committing to a purchase. This trial version grants users the opportunity to assess the tool’s effectiveness and suitability for unbricking their Realme 10T 5G. This instills confidence before investing in a full license.

How To Unbrick Realme 10T 5G Using Dr.Fone - System Repair (Android)

Dr. Fone’s features are perfect for unbricking Realme 10T 5G devices. Below are the procedures to restore your Realme 10T 5G from its bricked state.

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

• Fix your Android to normal, no skills required.
• Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
• The high success rate in resolving Android system issues.
• Compatible with a wide range of Android devices and OS versions
• User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

• Step 1: Download and install Dr.Fone - System Repair (Android) on your computer. After launching the application, click System Repair. Then, click Android as the Realme 10T 5G device type. Connect your Realme 10T 5G. Indicate Phone Brick as the Android issue and initiate the process by clicking Start.

• Step 2: Select the appropriate device information corresponding to your Realme 10T 5G. Choose Brand, Name, Model, Country, and Carrier. Confirm by checking the I agree button, then proceed to the next step by clicking Next.

• Step 3: Given that the Realme 10T 5G lacks a Home button, click the Phone without Home button option. Follow the prompts displayed on-screen and proceed by clicking Next to initiate the process of restoring your bricked phone.

• Step 4: As your Realme 10T 5G enters Download Mode, the firmware download will start automatically. Follow the on-screen instructions. Wait for the system to initiate the repair procedure automatically. Upon completion, a message will pop up on the main window. Click Done to exit the tool. You can click Try again to repeat the process if needed.

You May Also like:

How To Fix iPhone Bricked After iOS 17/iOS 16/iOS 15 Update
How to Fix It If Your Realme 10T 5G Phone Got Bricked?

Conclusion

Don’t let a bricked Realme 10T 5G stand in your way. Use the array of techniques from basic troubleshooting to advanced software tools to breathe life back into your device. Unbrick your Realme 10T 5G to its full functionality using the methods provided or Dr.Fone’s adept assistance.

Lastly, you can still refer to Realme 10T 5G for repairs. It remains the primary solution in numerous cases. Utilizing your warranty can alleviate the associated costs. Seeking assistance from a specialized technician is also a viable route to consider for a thorough device assessment.

How To Fix Part of the Touch Screen Not Working on Realme 10T 5G

You probably touch the screen of your phone hundreds of times per day. It’s no surprise that smartphone touchscreens are one of the most common components to fail, given their delicate glass construction. However, a part of the touch screen not working on your Realme 10T 5G does not necessarily mean it is a hardware issue. There could be other reasons why your Android’s touch screen stopped responding.

If your phone’s touchscreen frequently fails to respond, there are several things you can try before calling a professional. This article will reveal those proven fixes you can easily perform independently.

Part 1. Why Is Part of My Screen Not Working

There are two possible causes as to why your phone’s touch screen is not working. One is the touch screen may have been damaged, and the other is the Realme 10T 5G device may be experiencing technical difficulties.

If you drop your phone and it becomes stuck against something, the touch screen’s connectivity may fail. Only a part of the touch screen may sometimes become damaged and unresponsive. That may also occur when there is a technical failure, such as the phone hanging. A part of the touch screen not working can occur when malware is downloaded or when phone settings are changed.

Now, the problem can affect any Android phone, and users may encounter the following error messages on their respective phone models:

• Realme 10T 5G P40 lite half touch screen not working
• Nexus touch screen not working
• LG screen is unresponsive to touch
• Realme 10T 5G left side of the screen is not working
• Redmi’s whole screen is unresponsive to touch

Part 2. Different Types of Touch Screen Issues and What You Should Check Before Fixing

You may experience a variety of touch screens not working on Android issues:

• A certain part of the touch screen is not working.
• Your touches do not register on the touch screen.
• The touch screen incorrectly responds to your touch.
• Half touch screen is not working.
• The touch screen becomes frozen or hangs.
• The screen flashes, flickers, or remains blank.
• Theleft side of the phone screen is not working.

Before proceeding to how to fix an unresponsive touch screen on an Android device, you should complete the following steps:

• Examine the screen of your device. Check to see if it is cracked or chipped.
• If the screen is damaged, it must be replaced.
• Remove the Realme 10T 5G device cover and screen protector if they are not damaged.
• If there is a sticker on the Realme 10T 5G device screen, you must remove it.
• Before continuing, make sure your screen is spotless.

Part 3. How To Fix Part of the Touch Screen Not Working (No Physical Damage)

If you have already tried running the Realme 10T 5G device in diagnostic mode and verified that it is not physically damaged, then the problem is most likely technical. If your Realme 10T 5G’s screen is not responding to touches for technical reasons, follow the methods below to resolve the issue.

Restart Your Device

When your touch screen stops working, the first thing you should do is restart your device. The operation is known as soft resetting. You cannot turn your device off from the option on the screen because the touch screen is not responding. Here are the steps to take.

Step 1: Hold the “Power” button until the Realme 10T 5G device turns off.

Tip: If you hold down the power button for a few seconds, you will see the “Power Off” and “Restart” options on the screen. You can’t use it because the entire screen isn’t responding. Hence, you should press and hold the “Power” button for as long as necessary.

Step 2: When the Realme 10T 5G device turns off, wait a few seconds.

Step 3: Press and hold the “Power” button to restart the Realme 10T 5G device.

Check to see if the Android auto touch screen is not working problem has been resolved. Otherwise, proceed with the following methods.

Turn On Safe Mode

You should switch to Safe mode whenever an application or piece of software causes a problem on your device. Only the most fundamental system components are loaded and used when operating in Safe mode.

If your touch screen is functional in safe mode, the issue is most likely internal. You can quickly fix the Android touchscreen issue by following the prompts given below to activate the safe mode:

Step 1: To force a restart, press and hold the Realme 10T 5G device’s “Power” button for an extended period.

Step 2: Maintain pressure on the “Power” button. Take your finger off it once you see the manufacturer’s logo.

Step 3: When you let go of the “Power” button, press and hold the “Volume Down” button. After that, a “Safe Mode” label will appear in your screen’s lower-left corner.

Turn Off Developer Options

Every smartphone is bound to have limitations. However, smartphone makers include a “Developer Options” menu for advanced users. Here, restrictions are removed, and user preferences can be customized.

If you enable Developer Options on some Android devices, they may stop working properly. If you have recently activated Developer Options and your touchscreen is no longer responding as expected, you should disable it. To do so, follow the instructions below:

Step 1: Launch the Settings app on your device.

Step 2: Select the System menu item, which usually locates at the bottom of the screen.

Step 3: Tap the Advanced options menu, then select Developer Options.

Step 4: You will then find the switch to turn it on or off. Disable itby toggling the button off.

Step 5: Restart your device to check if the part of the touch screen not working issue has been resolved.

Reset Device to Factory Settings

Resetting your device to its factory settings will return it to its state when you first unboxed it. All your phone’s data and installed apps will be erased, including any malware on your device that may be causing the issue to occur. Here’s how to restore your device to factory settings:

Step 1: Since your touch screen is not working, you can factory reset it using Google’s Find My Device web service.

Step 2: Go to Find My Device from any device and sign in to the Google account associated with the damaged screen device.

Step 3: After successfully logging in, you will see your device’s name. Select the Erase Device option.

Step 4: Confirm by pressing the Erase Device button.

Tip: Since all your data will be removed, it’s recommended to back up your data first before resetting your device to factory settings.

Part 4. Fix Using a Third-Party App – Wondershare Dr.Fone

If you’ve exhausted all other options and still can’t fix your Android’s part of the touch screen not working issue, it’s time to resort to Dr.Fone – System Repair! It allows you to repair Android system issues with a single click.

Many users have reported exceptions on their Android devices, such as touch screen failure, black screen of death, system UI failure, app crashing, etc. And in this case, people should seek an Android repair tool.

Dr.Fone – System Repair has made it easier than ever for Android users experiencing technical issues with their device, including an unresponsive touch screen, among other system issues. The best part is that no data will be lost while repairing Android system issues.

Follow the steps given below on how to use Wondershare Dr.Fone System Repair for Android:

Step 1: Select the System Repair option from the main window after starting Dr. Fone.

Step 2: Connect your Realme 10T 5G or tablet to the computer using the appropriate cable. Choose Android Repair from the three options shown on the left side of the screen.

Step 3: The device information screen will appear in the next window. There, input your device’s unified brand, name, model, country/region, and carrier information. Then click Next after you confirm the warning.

The Android repair procedure may wipe out all data on your device. To confirm and proceed, enter “000000”.

Note: It is strongly advised that you back up your Android data before attempting Android repair.

Step 4: Before repairing your Realme 10T 5G, you must boot it into Download mode. To boot your Realme 10T 5G or tablet into DFU mode, follow the steps below:

For a device that has a Home button:

1. Turn off your phone or tablet.
2. Hold the Volume Down, Home, and Power buttons for 5 to 10 seconds.
3. To enter Download mode, release all the buttons and press the Volume Up button.

For a device that lacks a Home button:

1. Turn off the Realme 10T 5G device.
2. Hold the Volume Down, Bixby, and Power buttons for 5 to 10 seconds.
3. To enter Download mode, release all the buttons and press the Volume Up button.

Step 5: Then press the Next button. The program will then download the firmware. After downloading and verifying the firmware, the program will automatically repair your Realme 10T 5G. And in a while, your Realme 10T 5G’s system issues will be resolved.

Supported OS

Check Dr.Fone’s supported operating systems below before using the application to fix your mobile technical issues.

Key Features

Dr.Fone – System Repair is a data management and recovery tool that contains several toolkits in one program, each designed to repair a specific phone problem. Check out its key features below:

• One-click Android Repair Tool
• Troubleshoots and repairs a wide range of Android system problems, including black screen of death, Play Store not working, apps crashing, phone stuck in a boot loop, and bricked Android issues
• A high success rate for fixing Android system issues
• Fixes Android system back to normal

Pros

Here are the advantages of using Dr.Fone – System Repair:

• Highly intuitive UI/UX/. No need for any skill to operate it
• Provides a comprehensive set of toolkits, including advanced data recovery and system repair
• Data management is simple and seamless for both Android and iOS devices
• Data backup with Dr. Fone is simple and quick.

Cons

Check below to know Dr.Fone – System Repair’s limitations:

• Depending on the toolkit required, the program can be costly.

safe & secure

Conclusion

Fixing an Android part of the touch screen not working issue can be quickly done with just a few fixes you can do on your own. However, there may be times when the solutions provided above may not work, and the worst part is factory resetting your phone erases all your data.

That’s why Dr.Fone – System Repair might be your best solution. It has all the tools you need to keep your Realme 10T 5G 100%. Not only that, but with Dr.Fone, you can repair your Android system issues without dealing with any data loss.

Want to Uninstall Google Play Service from Realme 10T 5G? Here is How

In this article, you will learn the pros and cons of uninstalling Google Play services, as well as a free root tool to help you do this.

Acts as a one-stop destination to download various kinds of apps from the Play Store. The Play service also provides a way to manage these apps without much hassle. From uninstalling to updating an app, all of this can be done with Google Play service. Nevertheless, there are times when users wish to uninstall Google Play services. To start with, it takes a lot of storage and makes it pretty tough for users to manage their devices. To help you, we will let you know how to uninstall Google Play Store in this informative post.

Part 1: Reason you might want to get rid of Google Play Service

Before we proceed and discuss different ways on how to update Play Store after uninstalling updates, it is important to cover the basics. We have heard plenty of users who wish to uninstall Google Play services, but are not sure of the repercussions. One of the main reasons is that it consumes a lot of space on phone’s storage. Not just that, it only consumes plenty of battery as well.

If your device is giving the insufficient storage warning, then you need to start by clearing your phone’s data. It is observed that the Google Play Service accumulates most of the data in a device. This leads to users looking for different ways to how to uninstall Google Play Store.

Part 2: What will it affect to uninstall Google Play Service?

If you think that Google Play Service only provides a platform to download new apps, then you are wrong. It provides several other functions that might alter the way you use your smartphone. It is linked with other essential Google services as well, like Google Maps, Gmail, Google Music, etc. After uninstalling the Google Play Service, you might face trouble using various essential apps.

Furthermore, it might tamper with the overall functionality of your device as well. For instance, you could encounter network issues, messaging problems, app crashing, and more. Since the Play Service is closely associated with Android system, it might have a prominent effect on your phone. If you have a rooted device, then you can easily install custom ROM and resolve these issues. Though, for a non-rooted device, overcoming these problems could be a big hurdle.

Part 3: How to disable Google Play Service?

By now, you already know all the repercussions of getting rid of Google Play Services permanently. Before you learn how to update Play Store after uninstalling updates, be sure whether you wish to uninstall Google Play Services or not. You can also choose to simply disable the services as well. If you face any severe issue afterward, then you can always enable the services manually.

To disable the Google Play Services, just go to your phone’s Settings > Applications > All and open Google Play Services. You will get to know about the app’s detail and a few other options here. Just tap on the “Disable” button. It will generate another pop-up message. Confirm it by tapping on the “Ok” button. This will disable Google Play Services on your device. Later, you can follow the same drill to enable it as well.

Now when you know how to uninstall Google Play Store on your device, you can easily customize it. Get rid of any kind of problem you are facing due to lack of storage or battery issues related to Google Play services after following these instructions. Feel free to drop a comment below if you face any setback while following this tutorial.