How To Revive Your Bricked Samsung Galaxy S23+ in Minutes

Samsung Galaxy S23+ has established a notable presence within the custom development arena. This trait holds for Samsung Galaxy S23+. Today, it’s still one of the most popular budget smartphones available. The popular smartphone offers the freedom to flash custom ROMs, attain administrative privileges, access countless customization options, and much more.

Yet, delving into these capabilities comes with its share of risks. The potential for your Samsung Galaxy S23+ to brick is high if you don’t know what you’re doing. This page teaches you how to unbrick your Samsung Galaxy S23+ if it happens.

Part 1. Potential Causes of a Samsung Galaxy S23+ Becoming Bricked

The factors that lead to your Samsung Galaxy S23+ to brick vary. The possible solutions also depend upon the underlying causes. At times, the manufacturer’s intervention remains the only viable remedy. Below are the most frequent causes of bricking.

• The presence of malicious malware can harm your Samsung Galaxy S23+. This can result in a ‘bricked’ state devoid of functionality.
• Altering the bootloader, system partition, or other critical software components risks triggering a bricking event.
• Bricking can also occur due to errors during the update process. Whether through automatic or manual downloads, any interruption during software updates can cause your Samsung Galaxy S23+ to brick.
• Using inappropriate methods when performing root access can also result in bricking. Performing root access is dangerous as it grants entry to the Samsung Galaxy S23+ device’s root directory housing the operating system.

Every Android device is susceptible to experiencing a system failure that leads to a bricked state. The risk remains consistent whether your device is from Samsung Galaxy S23+, Samsung Galaxy S23+, Samsung Galaxy S23+, or any other brand. That’s why it’s strongly advised against modifying their smartphones, especially when you don’t know what you’re doing.

Part 2. Techniques To Unbrick a Samsung Galaxy S23+

When faced with a bricked Samsung Galaxy S23+, below are various techniques to revive it. Whether through software resets or hardware interventions, these methods can help breathe life back into your device.

Discharge the Battery

A particular suggestion involves allowing the Samsung Galaxy S23+ device’s battery to discharge fully, enabling proper functionality of the Flash Tool software. This process typically spans a few days and is recommended by some specialists.

Perform a Factory Reset

Accessing the Samsung Galaxy S23+ device settings is impossible if your Samsung Galaxy S23+ bricks. For this reason, it is recommended to enter Recovery Mode. Here’s how.

• Step 1: Press and hold the Power button and select the Restart option. During the reboot, press the Volume Up and Power keys simultaneously.

• Step 2: The main menu will show three options: Reboot, Wipe Data, and Connect with MIAssistant. Choose Reboot.

Explore Dedicated Software Tools To Fix Bricked Phones

Samsung Galaxy S23+ offers its official software tools, such as the Samsung Galaxy S23+Flash Tool. It’s designed for advanced users familiar with flashing firmware onto their devices. Here’s how.

• Step 1: Download and install the Samsung Galaxy S23+Flash Tool .

• Step 2: Download the Stock Firmware of Samsung Galaxy S23+ and extract it on your computer. Press and Hold the Power and Volume Down buttons for at least 5-10 seconds to enter Fastboot Mode.

• Step 3: Connect your Samsung Galaxy S23+ to the computer using a USB cable. Launch Samsung Galaxy S23+Flash Tool and locate the Firmware you have downloaded on the computer. Click the refresh > flash to begin the flashing process.

• Step 4: The SUCCESS result should appear in the Samsung Galaxy S23+Flash Tool once the flashing process is done.

However, if the Samsung Galaxy S23+Flash Tool did not unbrick your Samsung Galaxy S23+, consider using Wondershare Dr.Fone - System Repair (Android). The platform allows you to unbrick your Samsung Galaxy S23+ with a few clicks.

Part 3. Reviving Your Samsung Galaxy S23+ Using Wondershare Dr.Fone - System Repair (Android)

Dr.Fone - System Repair (Android) equips Samsung Galaxy S23+ users with the ability to tackle soft brick and hard brick issues. This specialized Android repair tool enables you to restore your Samsung Galaxy S23+ through a streamlined process, requiring just a few simple clicks.

safe & secure

3,227,773 people have downloaded it

Key Features

Dr.Fone - System Repair (Android) offers several benefits to unbrick your Samsung Galaxy S23+ easily. Below are its key features.

• Fix Common Samsung Galaxy S23+ Problems in Minutes. This tool provides comprehensive solutions for common issues like black screen, Play Store not working, boot loops, or even bricked Android devices .
• Compatibility with Over 1000 Android Models. This app fixes glitches across modern Android devices. The software is compatible with an extensive range of models. Whether your Samsung Galaxy S23+ is unlocked or carrier-bound, restoration is not a problem.
• Unparalleled Software Flexibility. Dr.Fone - System Repair (Android) also boasts an added capacity to mend iOS devices. This versatile tool is your all-inclusive solution for mobile devices, ensuring convenience whether you own an iOS or Android device.

Advantage of Dr.Fone - System Repair (Android) for Unbricking Samsung Galaxy S23+

Here are three benefits to choosing Dr.Fone - System Repair (Android) for unbricking a Samsung Galaxy S23+. You’ll further believe Dr.Fone is a reliable assistant when reviving your bricked Samsung Galaxy S23+.

Simplified Firmware Management

Dr.Fone eliminates the tedious search for appropriate firmware when unbricking your Samsung Galaxy S23+. The platform automatically downloads the correct firmware for your device. The hassle of identifying and manually procuring firmware is removed, saving time and ensuring a smoother unbricking process.

User-Friendly Approach

One of Dr.Fone’s key strengths is its user-friendly design. It caters to users with varying levels of technical expertise by employing a step-by-step process. This approach guides users through the repair process with clarity. It reduces the requirement for advanced technical knowledge.

Free Version for Evaluation

Dr.Fone - System Repair (Android) offers a free version for everyone. It allows users to test its capabilities before committing to a purchase. This trial version grants users the opportunity to assess the tool’s effectiveness and suitability for unbricking their Samsung Galaxy S23+. This instills confidence before investing in a full license.

How To Unbrick Samsung Galaxy S23+ Using Dr.Fone - System Repair (Android)

Dr. Fone’s features are perfect for unbricking Samsung Galaxy S23+ devices. Below are the procedures to restore your Samsung Galaxy S23+ from its bricked state.

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

• Fix your Android to normal, no skills required.
• Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
• The high success rate in resolving Android system issues.
• Compatible with a wide range of Android devices and OS versions
• User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

• Step 1: Download and install Dr.Fone - System Repair (Android) on your computer. After launching the application, click System Repair. Then, click Android as the Samsung Galaxy S23+ device type. Connect your Samsung Galaxy S23+. Indicate Phone Brick as the Android issue and initiate the process by clicking Start.

• Step 2: Select the appropriate device information corresponding to your Samsung Galaxy S23+. Choose Brand, Name, Model, Country, and Carrier. Confirm by checking the I agree button, then proceed to the next step by clicking Next.

• Step 3: Given that the Samsung Galaxy S23+ lacks a Home button, click the Phone without Home button option. Follow the prompts displayed on-screen and proceed by clicking Next to initiate the process of restoring your bricked phone.

• Step 4: As your Samsung Galaxy S23+ enters Download Mode, the firmware download will start automatically. Follow the on-screen instructions. Wait for the system to initiate the repair procedure automatically. Upon completion, a message will pop up on the main window. Click Done to exit the tool. You can click Try again to repeat the process if needed.

You May Also like:

How To Fix iPhone Bricked After iOS 17/iOS 16/iOS 15 Update
How to Fix It If Your Samsung Galaxy S23+ Phone Got Bricked?

Conclusion

Don’t let a bricked Samsung Galaxy S23+ stand in your way. Use the array of techniques from basic troubleshooting to advanced software tools to breathe life back into your device. Unbrick your Samsung Galaxy S23+ to its full functionality using the methods provided or Dr.Fone’s adept assistance.

Lastly, you can still refer to Samsung Galaxy S23+ for repairs. It remains the primary solution in numerous cases. Utilizing your warranty can alleviate the associated costs. Seeking assistance from a specialized technician is also a viable route to consider for a thorough device assessment.

How to Resolve Samsung Galaxy S23+ Screen Not Working

Nothing is more frustrating than your phone’s touch screen becoming unresponsive. Given the importance of smartphones in daily work, a phone with a touch screen not working can badly affect your routine. It is an issue found in most smartphone brands, even among Samsung Galaxy S23+ phones, known for their efficient performance. If your Samsung Galaxy S23+ screen is not working, it can be an exhausting experience.

Luckily for your, multiple ways are available to resolve this issue. This article will list six fixes for resolving the Samsung Galaxy S23+ not working issue. It will also discuss the reasons behind this issue in detail and provide a list of tips to avoid it in the future.

Part 1: What Causes Samsung Galaxy S23+ Screen Unresponsive?

Answering what causes Samsung Galaxy S23+ screen unresponsiveness is difficult. Many reasons, ranging from minor bugs to serious hardware issues, can cause it. To find out the exact or near exact reason, you will have to review your device’s activity before this issue occurs. You can use the following common reasons behind the Samsung Galaxy S23+ 6T touch screen not working as the basis of your investigation:

1. Touchscreen Calibration

Excessive smartphone use can cause the touchscreen to go out of the required settings. It means until the touch screen is not recalibrated properly, the touch not working issues will continue to pop up.

2. Battery Issue

If your device’s battery is damaged or is at the end of its lifespan, it can cause the touch screen not responding issues. Moreover, the low battery and issue with the charging port can also lead to this problem.

3. Corrupted System Files

The presence of corrupted system files is also a significant cause of such issues. These corrupted files can also lead to serious performance issues on your phone.

4. Conflicting Settings

It is also possible that the conflicting settings in your device are causing this issue. These settings can range from touch sensitivity to screen refresh rate. Unless these conflicts are removed, the touchscreen performance will continue to degrade.

Part 2: The Common Solutions to Solve a Samsung Galaxy S23+ Screen Unresponsive

Fixing the Samsung Galaxy S23+screen not working is easy as long as it is not a serious hardware issue. While there are multiple ways to solve this problem, we have chosen the 6 most common and easy solutions. Listed below are the 6 common solutions to solve a Samsung Galaxy S23+ screen unresponsive:

Solution 1. Restart the Samsung Galaxy S23+ Phone

As with any other issue or device, the first fix you should always try first is to restart your device. It is the best solution to fix the Samsung Galaxy S23+ not working issue if temporary bugs and glitches are the reason behind it. When you restart your device, it flushes out all temporary bugs and glitches while resetting your device’s processes. Use this guide to restart your Samsung Galaxy S23+ device:

Instruction: Press and hold the “Power” button for a couple of seconds until it turns off. Wait a few moments and then use the “Power” button to turn on the Samsung Galaxy S23+ device. In some of the Samsung Galaxy S23+ devices, you also have to use the “Volume Down” button along with the “Power” button to restart the Samsung Galaxy S23+ device.

Solution 2. Check the Charging Port and Battery

The issues with the battery of your Samsung Galaxy S23+ 5 can also lead to Samsung Galaxy S23+ not working. It can be due to your device’s low or near-empty battery. While in some cases, serious issues with the battery can also be behind this problem. Similarly, the reason behind your phone’s touch not working can be charging port issues.

Thus, you should check and clean your device’s charging port and see if it resolves the problem. Moreover, turn off your device, charge it, and then restart it to check if the touch screen not working issue is gone.

Solution 3. Contact the Samsung Galaxy S23+ Customer Support

Contacting Samsung Galaxy S23+ customer support can also help resolve the Samsung Galaxy S23+ screen not working problem. It is especially helpful if you are unable to find the cause and want to seek an expert opinion. The Samsung Galaxy S23+ customer support will help you find the issue and recommend a solution.

It is an excellent option if your Samsung Galaxy S23+ device’s touch is not working due to hardware issues. They can help guide you to a suitable service center to fix your phone and resolve this issue.

Solution 4. Wipe the Cache of Your Samsung Galaxy S23+ Device

A common reason for Samsung Galaxy S23+ Nord being stuck on the loading screen is the filled cache partition. If you do not clean out the cache partition of your Samsung Galaxy S23+ device, its performance will degrade. As a result, your device will experience issues like the touch screen not working or getting stuck at the loading screen. Here is how you can clear the cache of your Samsung Galaxy S23+ device:

Step 1: Turn off your device by pressing and holding the “Power” button. Once it is turned off, press and hold the “Power” and “Volume Down” buttons until you see the Samsung Galaxy S23+ logo.

Step 2: Now, enter your phone’s PIN or pattern and choose a language. After selecting the language, choose “Wipe data and cache.”

Step 3: Select “Wipe cache” on the next screen and confirm the action through “Yes” in the ensuing window. Once the process is complete, choose “Reboot” to restart your device.

Solution 5. Reset to Factory Settings

Sometimes, clearing the cache partition doesn’t help resolve the touchscreen issue. In that case, You have to factory reset your Samsung Galaxy S23+ device. It is the best and last solution if other fixes haven’t worked and you can’t pinpoint the reason. Factory resetting your Samsung Galaxy S23+ will delete all phone data. Thus, you should create a proper backup before trying this fix. Follow these steps to factory reset your Samsung Galaxy S23+ in no time:

Step 1: Launch Settings on your Samsung Galaxy S23+ device and tap “System” to select “Reset Options.”

Step 2: In the “Reset Options,” select “Erase all data (factory reset)” and confirm the action by again pressing “Erase All Data.” It will start the factory reset process.

Solution 6. Replace the Old Screen with A New Screen

If none of the above-mentioned fixes have worked so far, you should replace the touch screen. Replacing the touch screen is recommended in case of hardware and severe software issues. However, it can be quite an expensive fix as new touch screens aren’t cheap. The prices for new touchscreens differ depending on the model. These prices start from $20 and go up to hundreds of dollars.

Part 3: How to Avoid Samsung Galaxy S23+ Screen being Unresponsive?

Protecting your Samsung Galaxy S23+ device against system issues like touch not working is not difficult. While it is true that you can’t 100% avoid such problems, the risks can still be reduced to a great extent. To prevent your Samsung Galaxy S23+ screen from being unresponsive, here are some tips you can follow:

• ****Regular Updates:****You should always ensure that your Samsung Galaxy S23+ device runs on the latest software version available. It can help prevent bugs or glitches that might cause the screen to become unresponsive.
• ****Device Protection:****It is also essential that you use a good quality phone case and screen protector. These will protect your Samsung Galaxy S23+ device from physical damage. Drops, bumps, or scratches can damage the screen and make it unresponsive.
• ****Delete Unnecessary Apps:****If you have too many apps on your Samsung Galaxy S23+ devices, it can cause screen unresponsiveness issues. Thus, you should only install the apps you need and delete the apps that are no longer needed.
• ****Use Dr.Fone 13:****Having a professional tool like Fone in your arsenal helps a lot in protecting against system issues. If a system issue is able to pass through, Dr.Fone has the ability to resolve the issue in a matter of seconds. Moreover, it is a complete smartphone tool with data transfer, location changer, and system repair features.

A new version of Dr.Fone is expected to release in the latter half of this month. The new version will include many improvements, advanced features, and increased device support. Furthermore, it will also have a better and more user-friendly interface.

Conclusion

To sum up this article, it can be said that issues like Samsung Galaxy S23+ not working are part of life. These issues can occur anytime and are hard to completely protect against. Thus, having a problem solver like Wondershare Dr.Fone is the best choice. It will not only help you safeguard against system issues but also resolve them if they occur.

How to Flash Dead Samsung Galaxy S23+ Safely

• Fix malfunctioning Android to normal in one click.
• Highest success rate to fix all Android issues.
• Step-by-step guidance through the fixing process.
• No skills required to operate this program.

A phone is considered to be dead when it becomes completely unresponsive and refuses to switch on. Similarly, an Android phone is said to be dead when it does not boot up. You may try to switch it on several times by pressing the power button but in vain. You will see no sign of the phone’s logo or anything like a welcome screen. The Android phone’s screen remains black and does not illuminate when you try to turn it on. Interestingly, even when you charge this dead device, it does not show that it is getting charged.

Many people regard this as a battery issue, and many think of it as a temporary software crash. Some users also seem to believe that this is because of a virus attack. However, if you are looking for ways that tell how to fix a dead Android phone, you must understand that a dead phone or device can be cured by flashing custom firmware safely. If you are keen to know how to flash a dead Android phone or how to flash dead Android phones using PC, here are ways to help you.

Given below are eight techniques to flash your Samsung Galaxy S23+ safely, depending upon which phone you are using. It may seem time-consuming and tedious, but we can assure you that it works. So, move ahead and read on to learn about flashing new firmware, your Samsung Galaxy S23+, MTK Android, and Samsung Galaxy S23+ safely.

safe & secure

Part 1: Can a Dead Phone Be Flashed?

Flashing a dead Android phone might be skeptical for many users who have been in such a situation. Although it is possible to flash a dead Android phone, it is essential to be aware of the reasons that lead you into such a situation. Before a remedy, diagnosing the problem is a necessity for retaining the Samsung Galaxy S23+ device.

From battery issues to physical damage to the Samsung Galaxy S23+ device, there can be many reasons your Samsung Galaxy S23+ died. The reasons for a dead Android phone are not restricted to these points. There can be software-related issues or firmware issues that might cause such havoc on your Android.

Part 2: How to flash Samsung Galaxy S23+ in one click

While you are worried about how to flash Samsung Galaxy S23+ instantly with a single click, Dr.Fone - System Repair (Android) swiftly makes its way with a galore of options for you. This amazing tool from Wondershare can fix a plethora of Android system issues such as crashing of apps, black screen of death, failed system update, etc. Moreover, it can also get your device out of boot loop, unresponsive bricked Android mobiles as well as stuck at the Samsung Galaxy S23+ logo.

Dr.Fone - System Repair (Android)

One-click solution to flash Samsung Galaxy S23+

• The high success rate in fixing Samsung Galaxy S23+ Android devices.
• All the latest Samsung Galaxy S23+ devices are supported by this software.
• One-click operation of this tool helps you how to flash Samsung Galaxy S23+ easily.
• Being very intuitive, it doesn’t need you to be tech-savvy to use this software.
• It is one of its kind and the first one-click Android repair software on the market.

3981454 people have downloaded it

Step-by-step Tutorial

We are going to explain how to flash a dead Android phone using a PC using Dr.Fone - System Repair (Android)

Note: Before you understand how to flash Dead Android phone, take a backup of your data and then proceed to avoid any data loss.

Phase 1: Prepare your Samsung Galaxy S23+

Step 1: Once you have downloaded and installed Dr.Fone, launch it. From the main menu, tap on ‘System Repair’ and get your Samsung Galaxy S23+ connected to it.

Step 2: Click ‘Android Repair’ from the available options, and then press the ‘Start’ button to fix the Dead Android phone by flashing it.

Step 3: On the Samsung Galaxy S23+ device information screen, pick the appropriate device brand, name, model, and other details followed by tapping the ‘Next’ button.

Phase 2: Put the Android device in Download mode to start repair.

Step 1: It is essential to boot your Samsung Galaxy S23+ in Download mode before repairing.

• If the Samsung Galaxy S23+ device has a ‘Home’ button: Turn it off and then hold down the ‘Volume Down’, ‘Home’, and ‘Power’ buttons altogether for 5-10 seconds. Un-hold all of them and hit the ‘Volume Up’ button for entering ‘Download’ mode.

• In the absence of a ‘Home’ button: Switch off the Android device and hold the ‘Volume Down’, ‘Bixby’, and ‘Power’ buttons for 5 to 10 seconds, then release them. Hit the ‘Volume Up’ button for entering the ‘Download’ mode.

Step 2: Press the ‘Next’ button for initiating firmware download.

Step 3: Once the firmware gets downloaded and verified Dr.Fone - System Repair (Android) starts to flash your Dead Android phone. All the Android system issues will be fixed soon after.

safe & secure

Part 3: How to flash Samsung Galaxy S23+ dead phone with Odin?

In this segment, we will learn how to fix the dead Android phone, i.e., Samsung Galaxy S23+ phones using Odin software. Odin is software used internally by Samsung Galaxy S23+ to generally unblock devices and perform a more utility-based job, namely, flashing new firmware in place of the old one. There are different variants available, so choose the one which is supported by your Galaxy phone. Here is a step-by-step explanation of how to flash dead Android phone (Samsung Galaxy S23+) using Odin software.

Step 1: Install the driver software on the computer. You can find the best driver software for your device and PC on the official Samsung Galaxy S23+ website. You may also download Samsung Galaxy S23+ Kies on your PC. Once you have downloaded and installed the driver software, restart the PC.

Step 2: Now download suitable firmware for your device in the form of a zip folder that you can open and store on your desktop.

Make sure the file is .bin, .tar, or .tar.md5 only as these are the only file types recognized by Odin.

Step 3: In this step, download the latest version of Odin on your PC and move it to the desktop, and then right-click on the downloaded Odin file to select “Run as Administrator”.

Step 4: Now, boot your dead device to Download Mode by pressing the power, volume down, and home button together. When the phone vibrates, release the power button only.

Step 5: Gently press the volume up button, and you will see the Download Mode Screen.

Step 6: Now, you may use a USB to connect your Samsung Galaxy S23+ to the PC. Odin will recognize your device, and in the Odin window, you will see a message saying “Added”.

Step 7: In this step, find the tar.md5 file you downloaded by clicking on “PDA” or “AP” on the Odin window and then click “Start”.

Finally, once the flashing process is complete, your Samsung Galaxy S23+ phone will reboot and start normally, and you may see a “Pass” or “Reset” message on the Odin window on the PC.

Part 4: How to flash MTK Android dead phone with SP Flash tool?

SP Flash tool, also known as SmartPhone Flash tool is a popular freeware tool used to flash custom ROM or firmware in MTK Android phones. It is a very successful tool and is extremely easy to use.

Let us look at the steps given below to learn how to flash dead Android phones using PC with the help of the SP Flash tool.

Step 1: To start with, download and install the MTK driver on your PC and then download the ROM/firmware you wish to use for flashing purposes.

Step 2: Once done, you should download the SP Flash tool and extract it on your PC and move on to launch the Flash_tool.exe file to open the SP Flash tool window.

Step 3: Now, on the SP Flash tool window, click on “Download” and select “Scatter-loading”.

Step 4: The last step would be to locate the file downloaded by you and click “Open” and then finally, select “Download” on the SP Flash tool window.

After completing the above steps, connect your dead device to the PC with a USB cable and wait for it to get recognized. The flashing process will take a few minutes to finish and then you will see a green circle indicating “OK Download”.

That’s it! Now simply disconnect your phone and wait for it to reboot.

Part 5: How to flash Samsung Galaxy S23+ dead phone with the Phoenix tool?

Phoenix tool, better known as PhoenixSuit, is a tool similar to the SP False tool and Odin. It works very well with Samsung Galaxy S23+ and is the best answer to “How to fix dead Android phone?”, “How to flash dead Android phone using PC?”, etc.

Let’s look at the steps of flashing the Samsung Galaxy S23+ dead phone with the Phoenix tool.

First, download and install the Samsung Galaxy S23+ PC Suite driver on your PC. Then you will need to download the PhoenixSuit tool and then launch it.

Now, on the toolbar, click “Tools” and select “Data Package Download” from the drop-down list.

Click here


Then move to download the firmware for your dead Samsung Galaxy S23+ and save it in a new Folder. Once done, go back to the Phoenix tool window and click on “File” and select “Open Product”.

Simply, feed in the details and then click “OK”.

After this, click on “Flashing” and select “Firmware update” and then browse to select the appropriate product code and then click “OK” again.

Then move on to select “Dead Phone USB Flashing” from the Firmware Update Box.

Lastly, just click on “Refurbish” and connect your phone to the PC using a USB cable.

That was it, the flashing process may take up to a few minutes after which your dead Samsung Galaxy S23+ will restart automatically.

Part 6: How to flash a dead phone that won’t turn on via factory reset?

Using tools for flashing Android devices can be a solution; however, it is heavily restricted to the Samsung Galaxy S23+ device models. For a generalized solution, there can be other options that you can go with. Factory resetting an Android device by putting it in Recovery Mode is one way. To know how to flash a dead Android phone using factory reset, go through the steps featured below:

Step 1: To initiate the process, you will have to put your Samsung Galaxy S23+ in Recovery Mode. Generally, Android phones are put in Recovery Mode by holding the “Power” and “Volume Up” keys for a few seconds after turning them off. The key combinations can vary according to your Samsung Galaxy S23+.

Step 2: As the Android boot menu opens on your screen, use the “Volume Down” and “Volume Up” keys to scroll up and down the menu. On accessing the “Wipe Data/Factory Reset” option, use the “Power” key to select the particular option.

Step 3: Continue to select the “Yes” option for confirming the factory reset of the Android device. The phone will automatically reboot after successfully factory resetting.

Part 7: How to flash a dead Android phone by checking screen faulty

The screen of your Samsung Galaxy S23+ may be faulty, due to which it is not launching. While seeking the right way of how to fix a dead Android phone, you can force restart your phone using the Volume buttons according to your device model.

If the Android vibrates on restarting and the screen does not lighten up, the problem can be directed to a hardware fault. The screen is broken and needs physical assistance to resolve the issue.

Part 8: How to fix a dead Android phone by changing the battery

Another solution that can help you fix the dead Android phone is changing its battery. The battery of an Android device can last up to 3 years. When its capacity drops to a bare minimum, it is best to change the battery of your Android. Upon trying to restart your Samsung Galaxy S23+, if it does not, you might need to replace your battery. All Android phone batteries are removable, which should be regulated with proper supervision.

Part 9: How to repair dead Android phone by contacting official support

If you are unable to discover any proper solution for how to flash dead Android phones, you might have to consult the respective customer support of the Android phone manufacturers. Consult customer support to discover why the phone is dead and how it can be flashed. The respective personnel will assist you in resolving the issue, which might require monetary input from your side.

Conclusion

A dead Android phone might be the cause of worry, but the techniques given above to flash your dead Android device safely are very helpful. These methods have been tried and tested by users all over the world and thus, we recommend them to you. If your phone is dead or has become unresponsive, do not panic. Depending on your phone’s brand, here are ways to guide you on how to fix the dead Android phone and how to flash dead Android phone using PC.

It has been observed that Wondershare Dr.Fone – System Repair (Android) assists in the best way. Resolve all your concerns involving your dead Android phone and flash it to make it operable again.

Carefully follow the instructions given, and you will be able to reboot your dead Android phone successfully.