How To Revive Your Bricked Tecno Camon 20 in Minutes

Tecno Camon 20 has established a notable presence within the custom development arena. This trait holds for Tecno Camon 20. Today, it’s still one of the most popular budget smartphones available. The popular smartphone offers the freedom to flash custom ROMs, attain administrative privileges, access countless customization options, and much more.

Yet, delving into these capabilities comes with its share of risks. The potential for your Tecno Camon 20 to brick is high if you don’t know what you’re doing. This page teaches you how to unbrick your Tecno Camon 20 if it happens.

Part 1. Potential Causes of a Tecno Camon 20 Becoming Bricked

The factors that lead to your Tecno Camon 20 to brick vary. The possible solutions also depend upon the underlying causes. At times, the manufacturer’s intervention remains the only viable remedy. Below are the most frequent causes of bricking.

The presence of malicious malware can harm your Tecno Camon 20. This can result in a ‘bricked’ state devoid of functionality.
Altering the bootloader, system partition, or other critical software components risks triggering a bricking event.
Bricking can also occur due to errors during the update process. Whether through automatic or manual downloads, any interruption during software updates can cause your Tecno Camon 20 to brick.
Using inappropriate methods when performing root access can also result in bricking. Performing root access is dangerous as it grants entry to the Tecno Camon 20 device’s root directory housing the operating system.

Every Android device is susceptible to experiencing a system failure that leads to a bricked state. The risk remains consistent whether your device is from Tecno Camon 20, Tecno Camon 20, Tecno Camon 20, or any other brand. That’s why it’s strongly advised against modifying their smartphones, especially when you don’t know what you’re doing.

Part 2. Techniques To Unbrick a Tecno Camon 20

When faced with a bricked Tecno Camon 20, below are various techniques to revive it. Whether through software resets or hardware interventions, these methods can help breathe life back into your device.

Discharge the Battery

A particular suggestion involves allowing the Tecno Camon 20 device’s battery to discharge fully, enabling proper functionality of the Flash Tool software. This process typically spans a few days and is recommended by some specialists.

Perform a Factory Reset

Accessing the Tecno Camon 20 device settings is impossible if your Tecno Camon 20 bricks. For this reason, it is recommended to enter Recovery Mode. Here’s how.

Step 1: Press and hold the Power button and select the Restart option. During the reboot, press the Volume Up and Power keys simultaneously.

Step 2: The main menu will show three options: Reboot, Wipe Data, and Connect with MIAssistant. Choose Reboot.

Explore Dedicated Software Tools To Fix Bricked Phones

Tecno Camon 20 offers its official software tools, such as the Tecno Camon 20Flash Tool. It’s designed for advanced users familiar with flashing firmware onto their devices. Here’s how.

Step 1: Download and install the Tecno Camon 20Flash Tool .

Step 2: Download the Stock Firmware of Tecno Camon 20 and extract it on your computer. Press and Hold the Power and Volume Down buttons for at least 5-10 seconds to enter Fastboot Mode.

Step 3: Connect your Tecno Camon 20 to the computer using a USB cable. Launch Tecno Camon 20Flash Tool and locate the Firmware you have downloaded on the computer. Click the refresh > flash to begin the flashing process.

Step 4: The SUCCESS result should appear in the Tecno Camon 20Flash Tool once the flashing process is done.

However, if the Tecno Camon 20Flash Tool did not unbrick your Tecno Camon 20, consider using Wondershare Dr.Fone - System Repair (Android). The platform allows you to unbrick your Tecno Camon 20 with a few clicks.

Part 3. Reviving Your Tecno Camon 20 Using Wondershare Dr.Fone - System Repair (Android)

Dr.Fone - System Repair (Android) equips Tecno Camon 20 users with the ability to tackle soft brick and hard brick issues. This specialized Android repair tool enables you to restore your Tecno Camon 20 through a streamlined process, requiring just a few simple clicks.

safe & secure

3,227,773 people have downloaded it

Key Features

Dr.Fone - System Repair (Android) offers several benefits to unbrick your Tecno Camon 20 easily. Below are its key features.

Fix Common Tecno Camon 20 Problems in Minutes. This tool provides comprehensive solutions for common issues like black screen, Play Store not working, boot loops, or even bricked Android devices .
Compatibility with Over 1000 Android Models. This app fixes glitches across modern Android devices. The software is compatible with an extensive range of models. Whether your Tecno Camon 20 is unlocked or carrier-bound, restoration is not a problem.
Unparalleled Software Flexibility. Dr.Fone - System Repair (Android) also boasts an added capacity to mend iOS devices. This versatile tool is your all-inclusive solution for mobile devices, ensuring convenience whether you own an iOS or Android device.

Advantage of Dr.Fone - System Repair (Android) for Unbricking Tecno Camon 20

Here are three benefits to choosing Dr.Fone - System Repair (Android) for unbricking a Tecno Camon 20. You’ll further believe Dr.Fone is a reliable assistant when reviving your bricked Tecno Camon 20.

Simplified Firmware Management

Dr.Fone eliminates the tedious search for appropriate firmware when unbricking your Tecno Camon 20. The platform automatically downloads the correct firmware for your device. The hassle of identifying and manually procuring firmware is removed, saving time and ensuring a smoother unbricking process.

User-Friendly Approach

One of Dr.Fone’s key strengths is its user-friendly design. It caters to users with varying levels of technical expertise by employing a step-by-step process. This approach guides users through the repair process with clarity. It reduces the requirement for advanced technical knowledge.

Free Version for Evaluation

Dr.Fone - System Repair (Android) offers a free version for everyone. It allows users to test its capabilities before committing to a purchase. This trial version grants users the opportunity to assess the tool’s effectiveness and suitability for unbricking their Tecno Camon 20. This instills confidence before investing in a full license.

How To Unbrick Tecno Camon 20 Using Dr.Fone - System Repair (Android)

Dr. Fone’s features are perfect for unbricking Tecno Camon 20 devices. Below are the procedures to restore your Tecno Camon 20 from its bricked state.

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

Fix your Android to normal, no skills required.
Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
The high success rate in resolving Android system issues.
Compatible with a wide range of Android devices and OS versions
User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

Step 1: Download and install Dr.Fone - System Repair (Android) on your computer. After launching the application, click System Repair. Then, click Android as the Tecno Camon 20 device type. Connect your Tecno Camon 20. Indicate Phone Brick as the Android issue and initiate the process by clicking Start.

Step 2: Select the appropriate device information corresponding to your Tecno Camon 20. Choose Brand, Name, Model, Country, and Carrier. Confirm by checking the I agree button, then proceed to the next step by clicking Next.

Step 3: Given that the Tecno Camon 20 lacks a Home button, click the Phone without Home button option. Follow the prompts displayed on-screen and proceed by clicking Next to initiate the process of restoring your bricked phone.

Step 4: As your Tecno Camon 20 enters Download Mode, the firmware download will start automatically. Follow the on-screen instructions. Wait for the system to initiate the repair procedure automatically. Upon completion, a message will pop up on the main window. Click Done to exit the tool. You can click Try again to repeat the process if needed.

You May Also like:

How To Fix iPhone Bricked After iOS 17/iOS 16/iOS 15 Update
How to Fix It If Your Tecno Camon 20 Phone Got Bricked?

Conclusion

Don’t let a bricked Tecno Camon 20 stand in your way. Use the array of techniques from basic troubleshooting to advanced software tools to breathe life back into your device. Unbrick your Tecno Camon 20 to its full functionality using the methods provided or Dr.Fone’s adept assistance.

Lastly, you can still refer to Tecno Camon 20 for repairs. It remains the primary solution in numerous cases. Utilizing your warranty can alleviate the associated costs. Seeking assistance from a specialized technician is also a viable route to consider for a thorough device assessment.

9 Solutions to Fix Tecno Camon 20 System Crash Issue

Android crash, better known as Android system crash is not a recent issue and has troubled many users in the past as well. It means when your device crashes suddenly and refuses to turn on again or when your device freezes and becomes unresponsive. It may also happen that your Tecno Camon 20 crashes abruptly but boots up normally only to crash again after a few minutes or hours. Android Crash sounds like a very serious problem and something that could damage your device or permanently destroy the software, but Android system crash can be dealt with easily. Just in case you suffer from an Android crash and want to know how to fix the Android system crash issue, rest assured that this problem is fixable. There are various ways to tackle the situation, to be discussed further, and you may choose the one that best suits you.

In this article, we will also talk about a unique technique to retrieve the data from your device on which Android system crash issue occurs. So let’s go ahead and read on to know more to fix the Android crash error.

Part 1: How to rescue data the Android system crashes?

When you encounter an Android system crash, before looking for solutions to fix it, make sure you retrieve all your data and information stored on your device. This might sound tedious but a very important step indeed.

Dr.Fone - Data Recovery (Android) is currently one of the most popular tools to retrieve data from not only broken or damaged, locked devices, and unresponsive devices but also from devices that face an Android system crash. You may try the software for free for scanning the data to understand its work. Dr.Fone’s Data Extraction tool not only retrieves and back-up contacts and messages but also your photos, videos, audio files, WhatsApp, docs, call logs, and other file folders. It is also equipped to retrieve data from the Tecno Camon 20 device’s internal memory as well as Google drive.

Dr.Fone - Data Recovery (Android)

World’s 1st data retrieval software for broken Android devices.

Recover data from broken devices or devices that are damaged in any other way such as those stuck in a reboot loop.
Highest retrieval rate in the industry.
Recover photos, videos, contacts, messages, call logs, and more.
Compatible with Tecno Camon 20 devices.

3,623,313 people have downloaded it

You may follow the steps given below to rescue your data from crashed Android devices.

1. Download and install the software on your PC. Run the software and then select the Data Recovery feature. Using a USB, connect your Tecno Camon 20 to the PC.

2. Select “Android” > “Recover from Broken Phone” in the lower right corner.

3. Choose the “Touch screen not responsive or cannot access the phone” to continue.

4. You will now see device options before you. Select yours and move on to feed in your device name and model details.

5. Now press the volume down, power, and home button on your device together to boot the phone in Download mode.

6. As long as your phone is in Download mode, the software will start to analyze phone data.

7. Finally, the process will take a few minutes to scan and display your phone data. Select “Recover to Computer” to retrieve all data on your PC as a backup.

Using Dr.Fone Damage Extraction software is intuitive and very safe. It prevents data loss and allows you to adopt various ways to recover your device from the Android system crash issue.

safe & secure

Part 2: Why does my Android phone system keep crashing?

Encountering a persistent issue like the Android phone system constantly crashing can be highly frustrating and disruptive. This part delves into the underlying causes of this problem. By understanding these reasons, you can take informed steps to troubleshoot and rectify the issue, ensuring a smoother and more enjoyable smartphone experience.

Software Glitches and Bugs
Incompatible or Poorly Optimized Apps
Outdated Operating System
Corrupted System Files
Malware and Security Threats
Hardware Overheating
Physical or Hardware Issues

A crashing Android phone system can be attributed to a variety of factors, ranging from software glitches and compatibility issues to hardware-related problems. Keep reading to get it solved!

Part 3: Restart your Tecno Camon 20

Once you have successfully retrieved your data, consider solving the Android crash issue as soon as possible. Before you redirect to a proper solution for repairing your Tecno Camon 20 system, you can try restarting your device as a quick remedy. Restart the Android device to clear temporary system data and potentially resolve any software glitches causing the crash, which can be done as follows:

Instructions: Hold your Tecno Camon 20’s “Power” button on the side of the phone. As the following window appears on the screen, select the “Reboot” option to restart the Android device successfully.

Part 4: Shut down unnecessary running apps

Another quick solution to avoid Android devices crashing is to shut down unnecessary apps running in the Tecno Camon 20 device’s background. To cater to that, you need to try out the following steps as a remedy to shutting down unwanted applications:

Step 1: Open the “Settings” of your Tecno Camon 20 and continue to the “Battery and device care” section from the available options. Continue to the “Memory” section on the next window to lead to the applications taking up space on your Tecno Camon 20.

Step 2: As you progress further, you need to select the “Clean now” button to shut down all unnecessary background applications running on the Android.

Part 5: Uninstall incompatible Apps to fix Android crash issue

If your Android system crash takes place frequently but the Tecno Camon 20 device turns on normally after that, there is a chance that some Apps may be causing the problem. Unnecessary and large App files burden the Tecno Camon 20 device system and force it to crash every now and then. Make sure you download, install and store only those Apps which are fully compatible with your Android system. DO NOT download Apps from other unknown sources and use only Google Play store for the purpose. All other incompatible Apps must be deleted to prevent them from tweaking your software.

To uninstall unwanted and incompatible Apps, please follow the steps below.

1. Visit “Settings” and search for “Application Manager” or “Apps”.

Select the App you wish to uninstall. From the options that appear before you, click on “Uninstall” to delete the App from your device.

You may also uninstall an App directly from the Home Screen (only possible in certain devices) or from the Google Play Store.

Part 6: Check Android storage and free up space

If you are constantly facing issues of your Tecno Camon 20 crashing, there is a possibility that your device’s storage is full. The need to free up space arouses the need to know about the potential steps for checking storage and cleaning up space, which is discussed as follows:

Step 1: You need to navigate into “Settings” and look for the “Battery and device care” section. As you lead next, select the “Storage” option to check the Android storage and see how it is segregated.

Step 2: As you navigate to the next screen, you can free up space by removing the applications from your Android. For that, tap on “Apps” to open a section containing the list of applications installed on the Android.

Step 3: Go through the list of applications and select any app you want to remove. As you navigate next, select “Uninstall” to lead to removing the app from the Android device.

Part 7: Clear cache partition to fix Android crash issue

Clearing cache is a good idea because it cleans your device and reduces the burden on the Android software and gives it enough space to function normally and carry out its operations.

In case the Android system crash issue is temporary, follow the steps given below to clear your device’s cache:

1. On your Tecno Camon 20, visit “Settings” and find “Storage”

2. Now tap on “Cached Data”, and then click “OK” to clear all unwanted cache from your device as shown above.

However, if the Android crash problem is such that your phone has frozen, becomes unresponsive, and does not turn on, you must first boot into the Recovery Mode screen.

1. Press the volume down button and power button together until you see a screen with multiple options before you.

2. Once you are on the Recovery Mode screen, use the volume down key to scroll down and select ”Wipe cache partition” as shown below.

3. After the process is completed, select “Reboot System” which is the first option in the recovery mode screen.

This method will help you erase all the clogged-up and unwanted files and resolve the Android system crash issue. If clearing cache doesn’t help, try formatting your SD Card.

Part 8: Remove the SD card to fix the Android crash issue

Removing and formatting your SD Card to fix the Android System crash issue is helpful when a corrupted SD Card disturbs the Android software forcing it to shut down suddenly.

To format your SD Card, just follow the instructions below.

1. Firstly, eject it from the Tecno Camon 20 device.

2. Then using an SD Card reading tool, insert the Card in your PC. Open Computer and then right-click on the SD card to format it.

Part 9: Update to the latest software version

Updating the Android device will cast out all glitches that prevent it from operating properly. For that, let’s look into the steps explaining how to update your Android software version to the latest option:

Step 1: As you lead into the “Settings” of your Android, scroll down and look for the “Software Update” option.

Step 2: On leading to the next screen, select the “Download and Install” option to continue updating your Android to the latest version.

Part 10: Use Wondershare Dr.Fone – System Repair To Fix Android System Crash

If you are not getting any specific solution to the problem, you can try fixing the Android system crash problems using specific tools. These third-party tools can be an excellent option for resolving system errors in Android devices. Wondershare Dr.Fone – System Repair (Android) is a great tool designed to resolve all system issues in Tecno Camon 20] and other smartphones.

It features a great system providing a one-click Android repair option for fixing all kinds of problems. Along with fixing all basic and advanced Android system issues, it features support for multiple Android devices.

Key Features of Wondershare Dr.Fone – System Repair (Android)

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

Fix your Android to normal, no skills required.
Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
The high success rate in resolving Android system issues.
Compatible with a wide range of Android devices and OS versions
User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

As we redirect to resolving Android system errors using Wondershare Dr.Fone – System Repair, let’s look into some essential features that make up the entire tool:

Features support for all the latest Android devices up to Tecno Camon 20 S22.
It can help you resolve issues like Android’s black screen of death, being stuck in the boot loop, and many more.
Provides an easy interface to execute procedures, making it a simple tool with no learning curve.

Steps To Repair Android System Crash Issue Using Dr.Fone – System Repair (Android)

Let’s redirect to the steps that can be used to repair Android system crash issues using Wondershare Dr.Fone – System Repair (Android):

Step 1: Launch and Open System Repair Tool

You need to download and install the latest version of Wondershare Dr.Fone on your computer. Proceed to launch and navigate into the “Toolbox” section. Look for the “System Repair” option and initiate the process while ensuring the Android device is connected to the computer through a USB cable.

Step 2: Start Repairing the Android

After selecting the nature of the Tecno Camon 20 device you want to repair, navigate to a new window where you need to click “Start” to initiate the system repair process.

Step 3: Define the Parameters of Device

You will be redirected to a new window where you need to define and verify some parameters before repairing the Android. Select the “Brand,” provide a “Name,” select a “Model,” and provide a country where it has been bought. Define the “Carrier” and click “Next” after confirming.

Step 4: Put Android in Download Mode

Whatsoever Android you own, you need to put it in Download Mode, depending on the buttons that the Tecno Camon 20 device has. The repairing process initiates as you enter the Download Mode, and new firmware is downloaded on the platform.

Step 5: Fix the Firmware of Android

Once it downloads and is verified, click the “Fix Now” button to repair the Android successfully. You may need to provide a PIN to confirm the process. Once provided, the next screen shows the progress of the repair process. As it completes, click the “Done” button to conclude fixing the Android system crash issue.

safe & secure

Part 11: Factory reset the Tecno Camon 20 device to fix the Android crash issue

Factory Resetting is advisable only when nothing else works. Also, there are two ways of doing it depending on whether the Android crash is permanent or temporary.

Follow the steps given below to factory reset your device while it is switched on:

1. Visit “Settings”.

Now select “Backup and Reset”.

In this step, select “Factory data reset” and then “Reset Device” to confirm Factory Reset.

The process of factory resetting your Tecno Camon 20 is risky and cumbersome, as it deleted all data, but it helps to fix the Android System crash error.

You may also follow the instructions given below to Master set your device in Recovery Mode if it won’t turn on after an Android system crash has taken place:

When you are at the Recovery Mode screen, scroll down using volume down key, and from the options given, select “Factory Reset” using the power key.

Wait for your device to perform the task and then:

Reboot the phone in Recovery Mode by selecting the first option.

Bottomline, the tips given above have helped many to solve the Android system crash issue. So do not hesitate to try them, but don’t forget to extract your data with Dr.Fone’s Data Recovery tool.

safe & secure

[8 Quick Fixes] Unfortunately, Snapchat has Stopped on Tecno Camon 20

Have you ever been deep in conversation with a loved one or friend, taking advantage of all the funny filters and games Snapchat has to offer when you’ve suddenly been presented with the ‘Unfortunately, Snapchat has Stopped’ error code? This is usually followed by the app crashing back to the main menu.

If so, don’t worry; you’re not alone. Snapchat crashing in this way is nothing new, but it can be incredibly annoying when it keeps happening and stops you from enjoying the conversations you care about.

Fortunately, there are plenty of solutions out there to help you out and get the app working again as it should do. Today, we’re going to explore them all to help you get back to what you were doing before and as though there was never a problem.

Part 1. Install Snapchat again from Google Play Store

One of the best ways to resolve the Snapchat crashing problem or Snap Map not working issue is to delete the app and reinstall it again. When you’re using your phone, there is data continually flowing around and data being sent here, there, and everywhere.

During these processes, bugs can occur, and if they can’t sort themselves out, the best thing to do is to reset your app and start from a fresh installation. Here’s how to do it.

Step 1: Hold down the Snapchat app from your main menu and press the ‘x’ button to uninstall the app.

Step 2: Open the Google App Store from your device and search ‘Snapchat’ in the search bar. Find the official app page and download the app onto your device.

Step 3: The app will automatically install itself once downloaded. Open the app, sign in to your account using your log-in details, and you should be able to use the app like normal.

Part 2. Check for new Snapchat Updates

Hand in hand with the problem above, sometimes a bug can restrict Snapchat from working, or perhaps your personal update settings. If you receive a Snapchat from someone with an upgraded version, this can crash your app.

Here’s how to make sure you’re running the latest version of Snapchat is Snapchat isn’t responding.

Launch the Play Store and navigate to the My Apps and Games page
Tap the Update button
The app will now automatically update to the latest version

Part 3. Wipe the cache of Snapchat

If you have a lot of data in your Snapchat cache, this can cause the app to become overloaded in which you’ll need to clear it to start again and refresh the app. This is a common problem that can cause Snapchat has stopped working error.

Here’s how to fix it.

Open the Snapchat app and tap the Profile icon on the top left-hand side of your screen
Tap the Settings gear icon on the top right
Scroll down the Settings menu and tap the Clear Cache option
Here, you can choose to Clear All, but you can select individual areas if you prefer
Tap the Confirm option to clear your cache preference completely

Part 4. Fix the system issues that caused Snapchat stopping

If you’re experiencing the Snapchat crashing on Android often, or you’re experiencing similar errors with other apps, this can be an indication that there’s something wrong with your Android operating system.

The best way to fix this is to repair your device using the software known as Dr.Fone - System Repair (Android). This is a powerful repair system that can completely recover your device from any errors, including the Snapchat keeps crashing error.

Dr.Fone - System Repair (Android)

Dedicated repair tool to fix Snapchat crashing on Android.

Recover your device from any problem, including black screen or unresponsive screen.
Supports over 1000+ unique Android devices, models, and brands.
Trusted by over 50+ million customers around the world.
Can fully repair faults with your Tecno Camon 20’s firmware in a few simple steps.
One of the most user-friendly applications in the world.

3,889,035 people have downloaded it

To help you make the most of this Android repair software and to fix your Snapchat not responding error, here’s a step-by-step guide on how to use it.

Step 1: Download the Dr.Fone - System Repair (Android) software to your computer. Install the software to your Mac or Windows computer by following the onscreen instructions.

Once completed, open the software, so you’re on the main menu.

Step 2: From the main menu, click the System Repair option, followed by the Android option. Of course, if you have an iOS device you want to repair in the future, the option is there if you want it. Also, connect your Tecno Camon 20 to your computer using the USB cable.

Step 3: Confirm details.

On the next screen, use the drop-down menus to confirm the model, brand, operating system, and carrier of your device. Click Next to confirm the details are correct.

Step 4: You’ll now need to put your phone into Download Mode, sometimes referred to as Recovery Mode. For this, you can follow the onscreen instructions. Make sure your device stays connected to your computer throughout this process.

The method will slightly differ depending on whether your device has a home button, so make sure you follow the right instructions for your individual device.

Step 5: Once in Download Mode, the software will now download and install a fresh version of your Tecno Camon 20’s operating system. This can take some time, so make sure your device stays connected, and your computer stays on and doesn’t shut down.

Step 6: That’s it! Once you see the screen saying your device has been repaired, you’ll be able to close the Dr.Fone - System Repair (Android) software, disconnect your phone, and can start using Snapchat as normal without the Snapchat not responding error coming up!

safe & secure

Part 5. Check for the Android update

Similar to some of the other solutions we’ve listed above, if you’re using an outdated version of the Android operating system, but the latest version of Snapchat is coded to the most recent, this can be a cause for the Snapchat crashing on Android problem to occur.

Fortunately, it’s easy to check to make sure you’re running the latest version of Android and to download and install the update if you need it. Here’s how, which will help to sort out your Snapchat keeps crashing Android problems.

Step 1: Open the Settings menu on your Tecno Camon 20 and select the About Phone option.

Step 2: Tap the ‘Check for Updates’ option. If an update is available, you’ll then have the option to Install Now or Install Overnight. If no update is available, you’ll see a notification stating your device is up to date and no action is needed.

Part 6. Connect to another Wi-Fi

In some cases, you may be trying to connect to a Wi-Fi network that’s not very stable. This may keep cutting the connection to your device, which in turn is causing Snapchat to crash on Android.

To resolve this, you can simply try connecting to another Wi-Fi network or a data plan to see whether this is the problem. If so, changing network and then using the Snapchat app should stop any error messages from occurring.

Step 1: Open the Settings menu on your Tecno Camon 20, followed by the Wi-Fi option.

Step 2: Tap the new Wi-Fi network you’re currently connected to, and then tap the ‘Forget’ option, to stop your phone connecting to it.

Step 3: Now tap the new Wi-Fi network you want to connect to. Insert the Wi-Fi security code and connect. Now try reopening and using the Snapchat to see if you can use it.

Part 7. Stop using the custom ROM

If you’re running a custom Android ROM on your device, with some versions of the ROM and some apps, you’re going to experience errors simply because of the way the apps and the ROMs are coded and designed.

Unfortunately, there’s no easy fix to this, and if you want to continue using the app, you’ll need to reflash your Tecno Camon 20 back to its original firmware, and then wait until the ROM developers update the ROM to be compatible with social apps like Snapchat.

However, this reflashing process is simple thanks to the Dr.Fone - System Repair (Android) software that we listed above. To follow the detailed step-by-step guide, follow the steps on Part 4 of this article, or follow the quick guide instructions below.

Download and install the Dr.Fone - System Repair (Android) software to your computer
Connect your Tecno Camon 20 to your Windows computer using the USB cable
Open the software and click the Repair option.
Select the Android device repair option
Make sure your carrier and device information are correct
Put your device into Download Mode by following the onscreen instructions
Allow the software to repair your Tecno Camon 20 automatically

Part 8. Reset the factory settings of your Android

One of the last resorts you can take is factory resetting your Tecno Camon 20 back to its original settings. From the day you first started using your device, you’ve been using the system and downloading files and apps, and over time this increases the chances of creating a bug.

However, by resetting your device to factory settings, you can reset these bugs and get your apps and device working again free from the Unfortunately, Snapchat has stopped error message. Here’s how to factory reset your device.

Make sure you back up your personal files from your device first like your photos and music files because factory resetting your device will clear your device’s memory.

Step 1: Tap the Settings menu on your device and click the Backup and Reset option.

Step 2: Click the Reset Phone option. That’s it! The phone will take several minutes to complete the process, after which your phone will be reset to its original state.

Fix Guide

How To Revive Your Bricked Tecno Camon 20 in Minutes | Dr.fone