How To Unbrick a Dead Nubia Red Magic 9 Pro

Discovering your phone died, especially among Nubia Red Magic 9 Pro models, can be disheartening. Looking online for ways to unbrick your Oneplus 8T can take up so much of your time. The unavailability of your device can disrupt your routine and connectivity. However, unbricking is the crucial solution to regain the functionality of your Nubia Red Magic 9 Pro device.

This guide teaches effective methods to unbrick your Nubia Red Magic 9 Pro. The page will also discuss the early warning signs and healthy habits to prolong your Nubia Red Magic 9 Pro. Read below to learn more.

Part 1. Early Warning Signs of a Hard-bricked One Plus Device

When a phone “bricks,” the Nubia Red Magic 9 Pro device becomes completely unusable and non-functional. It essentially turns into a “brick.” A bricked Nubia Red Magic 9 Pro device can be preceded by certain warning signs that you should be attentive to. Here are some of them below.

• **Corrupted Device and Boot Failures.**If your Nubia Red Magic 9 Pro freezes or fails to boot up properly, it can indicate underlying software issues that might lead to bricking.
• **Inability to Enter Fastboot Mode.**If you find it increasingly challenging to access the fastboot mode, it could signify impending trouble.
• **Consistent Black Screens.**Experiencing recurring black screens could indicate problems within the operating system. In the long run, this might escalate to bricking.
• **Unexpected Reboots and Crashes.**Frequent and unprovoked reboots, app crashes, and system instability might point toward software inconsistencies. Similar to consistent black screens, this could eventually lead to bricking.

Common Reasons for Your Nubia Red Magic 9 Pro Phone To Be Bricked

Understanding the factors that can trigger bricking in Nubia Red Magic 9 Pro devices is essential for preventing such scenarios.

Failed Updates or Interrupted Installations

When a firmware update is interrupted due to power loss, sudden device shutdown, or other disruptions, it can result in incomplete software installation and potential bricking.

Unauthorized User Modifications

Engaging in root access, flashing custom ROMs, or applying unsupported system modifications can destabilize the Nubia Red Magic 9 Pro device’s software, paving the way for bricking.

Incorrect Bootloader Unlocking

Mishandling the process of unlocking the bootloader, a crucial step for customization can lead to system inconsistencies and eventual bricking.

Compatibility Issues With Custom Software

Installing unofficial custom software, such as custom recoveries or third-party kernels, might not be compatible with the Nubia Red Magic 9 Pro device’s hardware or official software. That can cause conflicts that can lead to bricking.

Malware or Virus Infiltration

The presence of malicious software can cause significant disruptions to the Nubia Red Magic 9 Pro device’s functioning. It can lead to bricking if left unchecked.

Part 2. How To Unbrick One Plus Device Using Various Methods

The solutions below to unbrick your Oneplus are helpful methods to revive your device. Here’s an overview of these methods.

Method 1. Restore With Recovery Mode

Restoring using Recovery Mode can solve most problems that cannot be solved with a normal phone restart. Here’s how.

• Step 1: Turn off your Nubia Red Magic 9 Pro device. Press and hold the Power button and Volume Down until the Nubia Red Magic 9 Pro logo is displayed.

• Step 2: Move through the menu using the Volume Up and Volume Down buttons until you reach Recovery Mode. Press the Power button to choose it.
• Step 3: Select the Wipe data/factory reset option. Choose Yes to proceed and wait for the process to finish. Choose Reboot system now to see the results.

Method 2. Contact the Manufacturer

Engaging Nubia Red Magic 9 Pro’s official support can provide insights and potential solutions. This is advantageous if your device is under warranty.

Method 3. Professional Repair Shops

Certified repair shops have the expertise to diagnose and address bricking issues, offering tailored solutions.

Method 4. Software Tools

Leveraging specialized software tools like Wondershare Dr.Fone - System Repair (Android) simplifies the process, even for non-technical users.

Part 3. Healthy Habits To Consider To Prolong Your One Plus

Maintaining the longevity of your Nubia Red Magic 9 Pro device requires adopting proactive habits. Here are vital tips to consider.

• **Regular Software Updates.**Keep your Nubia Red Magic 9 Pro up to date with the latest firmware releases. These updates often include security patches, bug fixes, and feature enhancements contributing to overall device stability.
• **Battery Care.**Avoid frequent deep discharges and overcharging. Use original charging accessories and refrain from exposing the Nubia Red Magic 9 Pro device to extreme temperatures.
• **App Management.**Review and uninstall apps you no longer use. This reduces clutter and conserves system resources, promoting smoother device operation.
• **Cache and Storage Cleanup.**Clear app caches and delete unnecessary files from your device. It optimizes storage space and prevents sluggishness caused by excessive data accumulation.
• **Screen Protection.**Apply a screen protector and sturdy phone case to shield your device from scratches, cracks, and impacts. This safeguards the physical integrity of your Nubia Red Magic 9 Pro.
• **Safe Charging Practices.**Avoid using your device while charging, as this generates excess heat. Also, refrain from using non-certified chargers, which can harm the battery and device components.
• **Avoid Overloading the Nubia Red Magic 9 Pro device.**Limit multitasking and avoid running too many apps simultaneously. This minimizes strain on the Nubia Red Magic 9 Pro device’s RAM and processor, ensuring smoother performance.
• **Privacy and Security.**Implement robust, unique passwords and enable biometric authentication methods. Regularly review app permissions to enhance data privacy.

Tips: Unlock Your One Plus 6, 8T, or 10 Pro With Dr.Fone - Screen Unlock (Android)

Dr.Fone - Screen Unlock (Android) is powerful software designed to unlock Nubia Red Magic 9 Pro devices quickly. This tool is compatible with various Nubia Red Magic 9 Pro models, including the Nubia Red Magic 9 Pro 6, Nubia Red Magic 9 Pro, and Nubia Red Magic 9 Pro 10 Pro, ensuring a wide support reach.

Dr.Fone - Screen Unlock (Android)

Unlock Nubia Red Magic 9 Pro Without Password

• Unlock your Nubia Red Magic 9 Pro quickly and securely
• Easily remove passwords and screen locks of all types
• Enjoy a streamlined experience with no technical background required
• Feel confident with solutions backed by a high success rate

3,016,652 people have downloaded it

How To Unlock Your One Plus With Dr.Fone - Screen Unlock (Android)

Below is a guide on unbricking the Nubia Red Magic 9 Pro models using Dr.Fone - Screen Unlock (Android).

Step 1: Access Screen Unlock > Android

Navigate to the Screen Unlock section and select Android. Proceed by clicking on the Unlock Android Screen option.

Step 2: Choose Your Device Brand and Initiate Data Wipe

Identify your device brand for unlocking the screen. After selecting your device brand, you will be prompted to enter a specific mode. Once in this mode, Dr.Fone will commence the Android screen unlock process.

Step 3: Successful Screen Unlock

Allow the unlock process to run its course. If unsuccessful, click ‘Try Again’ for a second attempt. Upon successful screen unlock, click ‘Done’.

safe & secure

You May Also Like:

How To Fix iPhone Bricked After iOS 17/iOS 16/iOS 15 Update

iPhone Got Bricked? Here Is The Real Fix To Unbrick It!

How to Fix It If Your Nubia Red Magic 9 Pro Phone Got Bricked?

How to Fix the Soft Bricked Android Phone?

Conclusion

For Nubia Red Magic 9 Pro owners, your device’s revival rests in your hands. By embracing the abovementioned methods, you can reclaim your device from its bricked state. Act decisively to unbrick your Nubia Red Magic 9 Pro device and relish its seamless performance again.

For those who find themselves locked out of their Nubia Red Magic 9 Pro devices, there’s a reliable solution at your fingertips. Try Dr.Fone - Screen Unlock (Android) to regain access to your device swiftly and securely.

safe & secure

6 Solutions to Fix Error 505 in Google Play Store on Nubia Red Magic 9 Pro

In case you are receiving the error code 505 while downloading an application from Google play store and have no clue what is it, then this is the right article for you. In this article we are covering the reasons behind the occurrence of Google play error 505. Not only that, we are also providing 6 solutions to fix the error code 505. Usually, this error is seen with Android 5.0 Lollipop version and occurs at the time when you try to install the already downloaded application making it hard to run the app.

Such an error is a kind of permission error. That is, in case you have two similar kinds of applications such as banking apps and both looking for similar kind of permission, causes conflict error named as error 505.

The occurrence chance is more in the old operating systems, 4 KitKat, Android version 4. Let us then proceed to know more about this error 505.

Part 1: Reasons for Google Play error 505

As per the report by some users, error 505 occurs in certain apps such as Weather App, SBI, ITV, Adobe Air 15, We Chat etc.

To have the right idea about the problem, we have listed all the reasons of it occurrence below:

• Google play store is not updated or refreshed (Causes the error during the downloading process)
• Due to installation of an outdated version (In case your Android version is outdated may result in error in the installation process)
• Cache memory(Is the redundant data occurs due to search history)
• Application is not compatible with the Android OS (If the app you are downloading is not the updated may cause error)
• Adobe air app
• Data crash (Many time app or Google play store crashed crashes after downloading it, reason may be some bugs, so many apps are open, less memory etc.)

Now that we know the reasons, let us also learn about the solutions that will guide you to resolve the error code 505.

Part 2: 6 Solutions to fix error code 505

Any error that occurs during downloading or installation process not only hinders with the new app but also takes a large amount of our time to solve the issue. To check that, let us go through the 6 solutions one by one.

Solution 1: One click to make error code 505 disappear

The most common cause for error code 505 pop-up is that Android system files that underpin the Google Play module are corrupted. To make error code 505 disappear in this condition, you should have your Android system repaired.

Dr.Fone - System Repair (Android)

One click to repair Android system and make error code 505 disappear

• Fix all Android system issues like error code 505, error code 495, error code 963, etc.
• One click to fix error code 505. No technical skills required.
• Supports all the new Nubia Red Magic 9 Pro devices like Galaxy S8, S9, etc.
• Easy-to-understand instructions provided on each screen.

4,999,459 people have downloaded it

Now, you just need to follow these Android repair steps to fix error code 505:

Note: Android repair needs to flash the system firmware, which may erase existing Android data. To prevent data loss, back up all the important data from Android to PC .

Step1: Download the Dr.Fone - System Repair (Android) program , install and launch it. The following interface will pop up.

Step2: Select the “Android Repair” among the 3 tabs, connect your Android to PC, and click “Start”.

Step3: Choose the correct device details from each field, confirm them and continue.

Step4: Boot your Android in download mode, then start downloading the firmware of your device.

Step5: After the Nubia Red Magic 9 Pro device firmware is downloaded, the tool will start repairing your Android.

Step6: When your Android is repaired, the error code 505 will disappear.

Solution 2: Check whether Download Manger is ON or not

Many times download manager is set to disable due to which you are not able to download or install the app. So, it is required to make a check whether the download manager is set on or off. So that your installation process will work properly. The process to enable the download manager is as follows.

>Go to Settings

>Select the Application Manger or App (Option depends upon the Nubia Red Magic 9 Pro device)

At the top, an option will appear

>Swipe right till you locate Download manager at top of the screen of the Nubia Red Magic 9 Pro device

>Then Select Enable

Enabling download manager to give permission to the Nubia Red Magic 9 Pro device to start the download or installation process.

Solution 3: Updating to the latest version of OS of your Nubia Red Magic 9 Pro

Working with an old operating system is ok, but many times old version also creates some problem and is the main reason behind the occurrence of any bug or error. So, updating the older version act like a rescue to get rid of any such issue or bug. The Process of updation is quite simple; you just need to follow the below steps and your device is ready to get updated to the latest version. Steps are:

• >Go to Settings
• >Select about Phone
• >Click on System Update
• >Check for updates
• >Click on Update
• >Need to click on Install (if any update is available)

Solution 4: Clearing the cache memory from Google services Framework and Google play store

While browsing data online or through Google play store some cache memory get stored for the fast access to the pages. Below mentioned simple steps will help you in clearing out the cache memory from Google services framework and Google play store.

Process to clear the Cache memory for Google Services Framework

• >Go to Settings
• >Select Applications
• >Click on Manage Applications
• >Click to select ‘ALL’
• >Click on Google services framework
• >Select ‘Clear data and clear cache’

That will remove the cache memory of your Google services framework

Steps to Cache memory of Google Play Store

• >Go to Settings
• >Applications
• >Manage Applications
• >Click to select ‘ALL’
• >Select Google Play store
• >Clear data and clear cache

It will clear the cache of Google play store

Clearing the cache memory remove the extra temporary memory, thus free up space for the further installation process.

Solution 5: Reinstalling play store Updates

The reason behind the installation error code 505 might be Google play store updates.

Due to continuous updation of new apps and services Google Play store used to be flooded with so many updates or sometimes does not updated properly. That sometimes caused the problem in dealing with app installation. Resolving the issue is important to make your play store ready for future updation and installation.

• >Go to Settings
• >Visit Application Manager or Apps
• >Select Google Play Store
• >Click on Uninstalling Updates
• >A Message will appear ‘Change play store app to factory version’- Accept it
• >Now Open Google play store>It will refresh the updates within 5 to 10 minutes(So you need to keep your internet connection on while Google play store is updating its store for new updates.)

Solution 6: Third party App

In the case, error 505 occur due to the installation of two or more apps with duplicate permission of data, as many times we use to install two similar kind of app that creates the situation where both seeking out for somewhat similar permissions for the installation. The manual finding is a long and tiring process. Then you can take the assistance of ‘Lucky Patcher App’ to find out which app is creating the conflict. This app will assist you in finding out the duplicity if any and then modifying it. Through this app, once you will find out which particular app is causing the conflict, then you can delete that conflicting app from your phone so that problem of error code 505 gets sort out.

Download link: https://www.luckypatchers.com/download/

Note: If still, you are in the state of trouble to solve the issue of error code 505 then Google Play help center is here to look out all troubles related to app store and its service. You can check out the details by visiting the following link:

https://support.google.com/googleplay/?hl=en-IN#topic=3364260

Or call them at their call center number regarding the issue.

Bonus FAQ about Google Play error

Q1: What is a 505 error code?

The HyperText Transfer Protocol (HTTP) error 505: HTTP Version Not Supported response status code means that the HTTP version used in the request is not supported by the server.

Q2: What is a 506 error?

The 506 error code is a frequent error when operating the Google Play Store. You will sometimes see this error code when you are downloading an app. The app may seem to be downloading just fine when suddenly, near the end of the installation, an error occurs, and a message pops up saying, “App could not be downloaded due to an error 506.”

Q3: How to fix the 506?

Solution 1: Restart your device which can help solve most problems.

Solution 2: Remove the SD card safely.

Solution 3: Correct date and time if it is wrong.

Solution 4: Add your Google Account again.

Solution 5: Clear Google Play Store data and cache.

However, sometimes the five simple couldn’t work anymore. A system repair software can be helpful quickly. We really recommend the Dr.Fone - System Repair (Android) , only a few minutes, the error will be fixed.

Conclusion

Not being able to download or install the app is very frustrating and time-consuming also. Therefore, in this article, we went through the reasons behind the occurrence error code 505 as well as resolving the issue by following five effective methods. I hope that you would be able to sort out the error 505 by following above methods thus would be able to install the application without further delay.

How To Fix Unresponsive Phone Touchscreen Of Nubia Red Magic 9 Pro

Smartphones nowadays contribute to our daily workflow, whether you’re a student or a professional. They get more sophisticated and add new features every year, making them more attractive with each new release. However, users sometimes deal with their screen touch not working on Android, raising various concerns.

If you are facing a similar issue, this page has all the solutions to teach you what to do if your phone screen is not working. By exploring the different methods below, you will be able to know how to fix a frozen phone touch screen as an Android user. Read on for more information.

Part 1: Top Causes of an Unresponsive Touchscreen

Android has been the best-selling OS since 2011, with over three billion active users. With the release of Android 13, complaints over touch issues on certain Android phones have popped up over the internet. Meanwhile, software updates over the years can sometimes make their phones stuck on the loading screen, causing worry among Android users.

Here are some of the top causes why your phone screen stopped working, mainly for Android.

• Physical Damage

If your Android phone is not responding to touch, it can be due to a cracked LCD causing temperature variants or magnetic fields to malfunction on your Nubia Red Magic 9 Pro.

For iOS users, your iPhone will temporarily stop working if it detects extreme temperatures such as a too-hot or too-cold reading. You should turn off your iPhone and let it cool down or warm to a normal temperature.

• Faulty Applications

Certain apps can sometimes make your phone experience touch issues. Your Android screen may work everywhere except a particular app. In this case, the fault is likely on the app, not your smartphone. It’s recommended to download the latest apps with frequent software updates to prevent malicious apps from corrupting or crashing your phone.

• iOS/Android Software Issues

Your phone screen not responding can also be due to software glitches that your smartphone picks up during regular use. Your iOS/Android device will sometimes freeze or hang if you run too many intensive apps simultaneously. The situation can lead to touch issues when using the phone.

• Dirty Screen or Bad Peripherals

It may not respond properly when an Android device is dirty due to water, sweat, or body oils. It will not be able to take inputs, causing your phone to not respond to touch. A poor screen protector and a tightly pressed phone case will also negatively impact your smartphone.

Part 2: What To Do When Your Smartphone Is Not Responding to Touch

Here is a list of things you should do how to fix a frozen phone touch screen, whether you’re using an iPhone or an Android smartphone.

1. Clean Your Smartphone

Your screen touch not working can sometimes get fixed by simply cleaning the screen on your smartphone. Use a soft dry cloth, gently clean your iPhone or Android device, and ensure water, oils, dirt, or other debris are no longer on your display. If you recently dropped your device in water, turn it off and leave it untouched for the next few hours.

2. Remove Extra Peripherals

Unplug any external device connected to your iPhone’s Lightning port or USB-C if your phone screen stops working. For Android users, meanwhile, disconnect any accessories like chargers or wireless headphones. After that, try using the touchscreen. If it works, the outcome proves that the fault appeared due to the external device.

3. Force Restart Your Device

If your phone screen is still unresponsive,maybe it is overloaded. You should force restart your Nubia Red Magic 9 Pro. It doesn’t delete any data. Here’s how.

Example 1: For Nubia Red Magic 9 Pro Smart Phones

Here’s how to force restart your smartphone to fix your phone screen that’s not responding.

• Press and hold the Powerand Volume Down buttons simultaneously for more than 7 seconds to force a reboot.

E****xample 2: For Nubia Red Magic 9 Pro Redmi

If your Nubia Red Magic 9 Pro Redmi phone is stuck on loading screen or “thinking” for a long time without responding, reboot it in just two steps.

Step 1: Press and hold the power button on the right side of the screen, then a screen showing several options appears.

Step 2: Choose Restart, then Accept if a confirmation message spears. Then wait a few seconds or minutes when your device is performing the reboot.

4. Update Your Software

Your smartphone may behave erratically due to software bugs. While these are out of your control, you can quickly fix your phone not responding to touch by simply updating your OS to the latest version. Here’s how.

• For iOS users, go to your iPhone Settings> General > Software Update > Download and Install.
• For Android owners, go to Settings > Software Update. Tap the Check for software updatesto see if a new update is available.

5. Perform a Factory Reset

If nothing helps, your remaining option is to try completing a Factory Reset. Doing this will erase all your data, but this is arguably the quickest way to restore your screen-frozen phone to its factory default settings. Factory Reset is available on Android devices with almost similar steps. Here’s how.

For Android, Nubia Red Magic 9 Pro Series

Step 1: Search and tap the Settings option, and open General management.

S****tep 2: Swipe the options, find and tap Reset >  Factory data reset, and check the information below. Then swipe and press the Reset button.

Note:

You might be asked to enter the pin of the security lock on the phone if you’ve set one.

S****tep 3: You may need to enter your Nubia Red Magic 9 Pro account password if you have bounded an account to your phone after taping Delete all. Then your Nubia Red Magic 9 Pro phone will reset. You’ll see its initial setup screen when it turns back on.

Part 3: How to Fix Unresponsive Touchscreen With an Alternative

The methods outlined above usually solve issues on your smartphone not responding to touch. If all else fails, Wondershare Dr.Fone for iOS and Android can fix various smartphone issues within less than 10 minutes. The program enables you to fix common scenarios such as black screen, boot loop, bricked iOS or Android, and much more without any required skills.

Key Features

The key features of Wondershare Dr.Fone for iOS and Android are listed below.

• Fix all iOS and Android Problems in Minutes

Wondershare Dr.Fone for Android and iOS allows you to fix your smartphone within less than 10 minutes. For iPhone owners, common issues such as a black screen, white screen of death, iPhone frozen, stuck on a restart loop, or recovery mode can easily be repaired with Dr.Fone. For Android users, meanwhile, problems, including unresponsive screen, black screen of death, boot loop, and more, are done within minutes.

• Supports up to 1000+ Android Models and iOS 16

The program supports all iOS versions, including the latest iOS 16 and iOS 16 beta. Compared to the iTunes store or other methods, the app can quickly fix any iPhone issues without data loss. For Android users, meanwhile, Dr.Fone supports up to 1000+ Android smartphones making it highly versatile even if you’re using an older Android device or the latest models.

Tech Specs

Here are the minimum system requirements of Wondershare Dr.Fone (iOS) for your computer.

Computer OS	iOS
Windows: 7, 8, 8.1, 10, 11	Support all iOS versions, including the latest iOS 16 & iOS 16 beta
macOS: 12, 11, 10.15, 10.14, 10.13, 10.12, 10.11, 10.10, 10.9, or 10.8

Meanwhile, here are the tech specs for Wondershare Dr.Fone (Android)’s minimum system requirements.

Computer OS	Android
Windows 7, 8, 8.1, 10, 11	Android 2.1 and up

Pros and Cons

Here are the pros and cons of using Wondershare Dr.Fone (Android)

Pros

• Fone – System Repair’s UI for iOS and Android is clutter free and beginner-friendly. You can start repairing your phone right away after installation.
• Repairing your iOS or Android smartphone within less than 10 minutes saves you precious time.

Cons

• The iOS and Android versions of Wondershare Dr.Fone are sold separately. You’ll have to get each version of the program if you own a smartphone for both iOS and Android.

Pricing

The iOS and Android versions of Wondershare Dr.Fone has different price plans. See them below.

Wondershare Dr.Fone (iOS) offers a quarterly, 1-year, and perpetual license, depending on your budget. Here’s the pricing below.

• Quarterly License (1-5 Mobile Devices) - $6.65/Month – With Auto Renew
• 1 Quarter License (1-5 Mobile Devices) - $7.32/Month – No Auto Renew
• 1-Year License (1-5 Mobile Devices) - $4.99/Month – No Auto Renew
• Perpetual License (1-5 Mobile Devices) - $79.95

Wondershare Dr.Fone (Android) price plans are available for a 1-Year or Perpetual License, depending on your budget.

• 1-Year License (1-5 Mobile Devices) - $39.95
• Perpetual License (1-5 Mobile Devices) - $49.95
• 1-Year Business License (Unlimited Devices) - $399.00

How To Fix Unresponsive Touchscreen With Wondershare Dr.Fone

In this step-by-step guide below, you can fix your unresponsive phone screen using Wondershare Dr.Fone on iOS and Android.

Step 1: Download and install Wondershare Dr.Fone for iOS or Android on your computer. Launch the app afterward and connect your smartphone.

Step 2A (For iOS): Choose the correct model of your iPhone to download the appropriate firmware package.

Step 2B (For Android): Choose the correct Brand, Name, Model, Country, as well as Carrier, then click Next.

Step 3: Follow the on-screen instructions provided on the main program window and wait for the repair process to complete.

Part 4: People Also Ask

Some common questions you should know when taking care of an unresponsive phone touchscreen are listed below.

1. Why Did My iPhone Screen Go Black After Not Responding to Touch?

Your iPhone screen with a touch issue will sometimes go black after not responding to touch due to several issues. It could be hardware, software, issues with a particular app, software crash, or you have a low battery. If it’s a drained battery, you’re in luck; all you have to do is charge it. Otherwise, you’ll have to perform a force restart on your iPhone to try to reboot it.

2. How Do I Keep My Android From Crashing?

Keeping your apps updated should help you solve app crashing issues that can impact your Android OS. These apps build up large caches throughout your normal usage. Clearing cached data from time to time can drastically improve your smartphone’s performance and prevent touch issues. To remove your app cache, go to Settings > Storage and tap Cached Data.

3. Can I Use Dr.Fone for Free?

Wondershare Dr.Fone for iOS and Android is free to download and install. You can also test the first few steps and see if the program supports your device. However, when you click the Fix Now button to start the repair process, you will be required to enter a valid license to activate the program.

safe & secure

Conclusion

Knowing the common causes of an unresponsive phone touchscreen is the first step to preventing it from happening to your smartphone. While there are ways to fix it when it does happen, prevention is better than cure, as most experts say. However, if the methods outlined above don’t work, your best bet is to use a dedicated program such as Wondershare Dr.Fone for Android and iOS.

Wondershare Dr.Fone works on almost all modern smartphones today and can fix a stop-working phone screen within less than 10 minutes. It’s beginner-friendly and doesn’t require advanced technical know-how to use right away.