How To Unbrick a Dead Samsung Galaxy S24

Discovering your phone died, especially among Samsung Galaxy S24 models, can be disheartening. Looking online for ways to unbrick your Oneplus 8T can take up so much of your time. The unavailability of your device can disrupt your routine and connectivity. However, unbricking is the crucial solution to regain the functionality of your Samsung Galaxy S24 device.

This guide teaches effective methods to unbrick your Samsung Galaxy S24. The page will also discuss the early warning signs and healthy habits to prolong your Samsung Galaxy S24. Read below to learn more.

Part 1. Early Warning Signs of a Hard-bricked One Plus Device

When a phone “bricks,” the Samsung Galaxy S24 device becomes completely unusable and non-functional. It essentially turns into a “brick.” A bricked Samsung Galaxy S24 device can be preceded by certain warning signs that you should be attentive to. Here are some of them below.

**Corrupted Device and Boot Failures.**If your Samsung Galaxy S24 freezes or fails to boot up properly, it can indicate underlying software issues that might lead to bricking.
**Inability to Enter Fastboot Mode.**If you find it increasingly challenging to access the fastboot mode, it could signify impending trouble.
**Consistent Black Screens.**Experiencing recurring black screens could indicate problems within the operating system. In the long run, this might escalate to bricking.
**Unexpected Reboots and Crashes.**Frequent and unprovoked reboots, app crashes, and system instability might point toward software inconsistencies. Similar to consistent black screens, this could eventually lead to bricking.

Common Reasons for Your Samsung Galaxy S24 Phone To Be Bricked

Understanding the factors that can trigger bricking in Samsung Galaxy S24 devices is essential for preventing such scenarios.

Failed Updates or Interrupted Installations

When a firmware update is interrupted due to power loss, sudden device shutdown, or other disruptions, it can result in incomplete software installation and potential bricking.

Unauthorized User Modifications

Engaging in root access, flashing custom ROMs, or applying unsupported system modifications can destabilize the Samsung Galaxy S24 device’s software, paving the way for bricking.

Incorrect Bootloader Unlocking

Mishandling the process of unlocking the bootloader, a crucial step for customization can lead to system inconsistencies and eventual bricking.

Compatibility Issues With Custom Software

Installing unofficial custom software, such as custom recoveries or third-party kernels, might not be compatible with the Samsung Galaxy S24 device’s hardware or official software. That can cause conflicts that can lead to bricking.

Malware or Virus Infiltration

The presence of malicious software can cause significant disruptions to the Samsung Galaxy S24 device’s functioning. It can lead to bricking if left unchecked.

Part 2. How To Unbrick One Plus Device Using Various Methods

The solutions below to unbrick your Oneplus are helpful methods to revive your device. Here’s an overview of these methods.

Method 1. Restore With Recovery Mode

Restoring using Recovery Mode can solve most problems that cannot be solved with a normal phone restart. Here’s how.

Step 1: Turn off your Samsung Galaxy S24 device. Press and hold the Power button and Volume Down until the Samsung Galaxy S24 logo is displayed.

Step 2: Move through the menu using the Volume Up and Volume Down buttons until you reach Recovery Mode. Press the Power button to choose it.
Step 3: Select the Wipe data/factory reset option. Choose Yes to proceed and wait for the process to finish. Choose Reboot system now to see the results.

Method 2. Contact the Manufacturer

Engaging Samsung Galaxy S24’s official support can provide insights and potential solutions. This is advantageous if your device is under warranty.

Method 3. Professional Repair Shops

Certified repair shops have the expertise to diagnose and address bricking issues, offering tailored solutions.

Method 4. Software Tools

Leveraging specialized software tools like Wondershare Dr.Fone - System Repair (Android) simplifies the process, even for non-technical users.

Part 3. Healthy Habits To Consider To Prolong Your One Plus

Maintaining the longevity of your Samsung Galaxy S24 device requires adopting proactive habits. Here are vital tips to consider.

**Regular Software Updates.**Keep your Samsung Galaxy S24 up to date with the latest firmware releases. These updates often include security patches, bug fixes, and feature enhancements contributing to overall device stability.
**Battery Care.**Avoid frequent deep discharges and overcharging. Use original charging accessories and refrain from exposing the Samsung Galaxy S24 device to extreme temperatures.
**App Management.**Review and uninstall apps you no longer use. This reduces clutter and conserves system resources, promoting smoother device operation.
**Cache and Storage Cleanup.**Clear app caches and delete unnecessary files from your device. It optimizes storage space and prevents sluggishness caused by excessive data accumulation.
**Screen Protection.**Apply a screen protector and sturdy phone case to shield your device from scratches, cracks, and impacts. This safeguards the physical integrity of your Samsung Galaxy S24.
**Safe Charging Practices.**Avoid using your device while charging, as this generates excess heat. Also, refrain from using non-certified chargers, which can harm the battery and device components.
**Avoid Overloading the Samsung Galaxy S24 device.**Limit multitasking and avoid running too many apps simultaneously. This minimizes strain on the Samsung Galaxy S24 device’s RAM and processor, ensuring smoother performance.
**Privacy and Security.**Implement robust, unique passwords and enable biometric authentication methods. Regularly review app permissions to enhance data privacy.

Tips: Unlock Your One Plus 6, 8T, or 10 Pro With Dr.Fone - Screen Unlock (Android)

Dr.Fone - Screen Unlock (Android) is powerful software designed to unlock Samsung Galaxy S24 devices quickly. This tool is compatible with various Samsung Galaxy S24 models, including the Samsung Galaxy S24 6, Samsung Galaxy S24, and Samsung Galaxy S24 10 Pro, ensuring a wide support reach.

Dr.Fone - Screen Unlock (Android)

Unlock Samsung Galaxy S24 Without Password

Unlock your Samsung Galaxy S24 quickly and securely
Easily remove passwords and screen locks of all types
Enjoy a streamlined experience with no technical background required
Feel confident with solutions backed by a high success rate

3,016,652 people have downloaded it

How To Unlock Your One Plus With Dr.Fone - Screen Unlock (Android)

Below is a guide on unbricking the Samsung Galaxy S24 models using Dr.Fone - Screen Unlock (Android).

Step 1: Access Screen Unlock > Android

Navigate to the Screen Unlock section and select Android. Proceed by clicking on the Unlock Android Screen option.

Step 2: Choose Your Device Brand and Initiate Data Wipe

Identify your device brand for unlocking the screen. After selecting your device brand, you will be prompted to enter a specific mode. Once in this mode, Dr.Fone will commence the Android screen unlock process.

Step 3: Successful Screen Unlock

Allow the unlock process to run its course. If unsuccessful, click ‘Try Again’ for a second attempt. Upon successful screen unlock, click ‘Done’.

safe & secure

You May Also Like:

How To Fix iPhone Bricked After iOS 17/iOS 16/iOS 15 Update

iPhone Got Bricked? Here Is The Real Fix To Unbrick It!

How to Fix It If Your Samsung Galaxy S24 Phone Got Bricked?

How to Fix the Soft Bricked Android Phone?

Conclusion

For Samsung Galaxy S24 owners, your device’s revival rests in your hands. By embracing the abovementioned methods, you can reclaim your device from its bricked state. Act decisively to unbrick your Samsung Galaxy S24 device and relish its seamless performance again.

For those who find themselves locked out of their Samsung Galaxy S24 devices, there’s a reliable solution at your fingertips. Try Dr.Fone - Screen Unlock (Android) to regain access to your device swiftly and securely.

safe & secure

Samsung Galaxy S24 Stuck on Screen – Finding Solutions For Stuck on Boot

The market has embraced Samsung Galaxy S24 for being the pioneers in the industry. Although the company lacked in providing explicit smartphones, they were still able to catch up with the race. Samsung Galaxy S24 C31, known to provide durability of the next level, is taking up the latest shelves of Samsung Galaxy S24 smartphones. Although the company promises reliability, there are several problems involving such smartphones.

One prominent solution stated by Samsung Galaxy S24 users involves the screen stuck in the boot. If your Samsung Galaxy S24 is stuck on the “Samsung Galaxy S24” screen for no particular reason, you will have to read this article. As this article tackles all reasons involving the problem, it comes up with the necessary solutions. These solutions will help Samsung Galaxy S24 users find solutions for their stuck screens on the boot.

Part 1: What Causes Samsung Galaxy S24 Screen Stuck on Boot?

Has your Samsung Galaxy S24 recently been stuck on the boot loop screen? If it is happening or has happened to you, there are some reasons that you need to be aware of. Having an overview of the causes of Samsung Galaxy S24 being stuck on the Android One screen can help you redirect yourself toward to right solution. Go through the list of all causes and find more about the issue involving screens stuck on boot in Samsung Galaxy S24 smartphones:

The Device is Damped in Liquid

It is entirely possible that your Samsung Galaxy S24 smartphone is immersed in water. With a smartphone dipped in liquid, the Samsung Galaxy S24 device can turn useless. If you have tried starting it again, it won’t run and might get stuck on the boot.

Soft-Bricked Device

There are multiple conditions where your Samsung Galaxy S24 smartphone can get soft-bricked. It majorly happens when a particular function in the Samsung Galaxy S24 device stops working. To counter the problem, it is essential that you can get your device stuck on the boot screen.

Outdated Device

If the equipment wears out after a certain time, there is a need to have it changed. With such obsolete models of Samsung Galaxy S24, you will surely face issues like a screen stuck on the boot. Smartphone equipment cannot be revamped, and you will have to go for newer options.

Software Update Required

A software update on your Samsung Galaxy S24 smartphone might be causing issues with the screen stuck on the boot. The best way to get rid of this problem is to update your system software to the latest version.

Part 2: 5 Solutions To Solve Samsung Galaxy S24 Screen Stuck on Boot

Do you seek to resolve the problem of the Samsung Galaxy S24 Plus stuck on the Android One screen? There are specific techniques that can be tried as a remedy. These solutions are tried and recommended by experts. Go through the details provided below to solve the issues with your stuck Samsung Galaxy S24 screen.

Solution 1: Force Restart Samsung Galaxy S24

The first and most proclaimed technique to refresh Samsung Galaxy S24 devices under such a problem is to force restart them. If the Samsung Galaxy S24 device is stuck, you will have to perform this process by pressing the “Power” and “Volume Up” keys for 15 seconds. Continue holding the buttons until the Samsung Galaxy S24 device vibrates or restarts by showing the screen again.

Solution 2: Leave the Phone For a While To Drain Its Battery

A conventional way to solve the issue of a stuck screen in Samsung Galaxy S24 is to leave the phone in its position. As you let its battery drain out, the phone will turn off, and you can activate the Samsung Galaxy S24 device again by charging it.

Once you restart it this way, all the procedures will initiate again, and the Samsung Galaxy S24 device will be as good as new. Draining the battery has given you the leverage to regain control over the Samsung Galaxy S24 device again.

Solution 3: Check For Updates on Samsung Galaxy S24 Smartphones

Another quick remedy to try on your Samsung Galaxy S24 smartphones involves updating their software. If there is any prevailing software update to install on the smartphone, you will have to check and update it by following the steps guided below:

Step 1: Open the “Settings” of your Samsung Galaxy S24 smartphone and continue to the “System” section in the list of options. You will have to access the “Advanced” options in the “System” menu.

Step 2: As you lead to the advanced options, look for “System update” in the provided options. Look for the “Check for update” button. This will check if your Samsung Galaxy S24 needs any software updates or not.

Solution 4: Using Wondershare Dr.Fone

One of the finest options available to perform is using a third-party platform that promises smooth operability. Wondershare Dr.Fone is a platform designed to provide such smartphones another life to survive. Its unique functionality repairs all the issues with a smartphone and makes it as good as a new one.

If your Samsung Galaxy S24 Plus is stuck on the Android One screen, this platform is the ultimate solution for you. With the support of the latest devices and software versions, Dr.Fone – System Repair (Android) offers the best results. To know how to repair your Samsung Galaxy S24 smartphone with the help of this tool, look through the steps featured next:

Step 1: Open Dr.Fone and Select System Repair

As you launch Dr.Fone after downloading it on your computer, continue to the “System Repair” option. You will have to start by connecting the Android device to the computer through a USB cable. Select “Android Repair” from the options available and continue to the following options.

Step 2: Define Device Information and Confirm

You will be directed to the Samsung Galaxy S24 device information screen, where you must define the identification parameters of the Samsung Galaxy S24 device. Select the brand, name, model, country, and carrier details for proper system recovery. On clicking “Next,” you will receive a warning where you will have to type the number “000000” to proceed with the method.

Step 3: Put Your Samsung Galaxy S24 in Download Mode

Following this, you will have to put your Samsung Galaxy S24 in Download Mode. For that, you need to follow the steps according to the condition of the Samsung Galaxy S24 device:

For Devices with Home Button:

Power off your Android and continue to press and hold the “Volume Down,” “Home,” and “Power” buttons for a few seconds. After holding them for almost 10 seconds, release and press the “Volume Up” button to enter the mode.

For Devices without Home Button:

Turn off the Android device and hold the “Volume Down,” “Bixby,” and “Power” buttons simultaneously for a few seconds. On releasing the buttons, press the “Volume Up” button to enter Download Mode.

Step 4: Start Downloading and Verify Firmware

To proceed, tap the “Next” button to download the firmware. As you verify the firmware, the repairing process starts on your Samsung Galaxy S24 device.

Solution 5: Contact the Customer Service Center of Samsung Galaxy S24

If the issue of the Samsung Galaxy S24 stuck on the “Samsung Galaxy S24” screen continues, you will have to contact the Samsung Galaxy S24 device’s customer support. With no proper method left for the Samsung Galaxy S24 device, the only effective technique is to visit the authorized store for Samsung Galaxy S24 smartphones and claim the issue with the Samsung Galaxy S24 device. In this way, you might receive or get a fully repaired device with no additional charges if the Samsung Galaxy S24 smartphone is under warranty.

Part 3: How to Avoid Samsung Galaxy S24 Screen Stuck on Boot?

What if you come to know that you can avoid the Samsung Galaxy S24 screen stuck-on boot problem? There are a set of tips and tricks that you can follow to explain how to prevent such an issue in the first place. Follow these tips to learn more about saving your Samsung Galaxy S24 from such miserable conditions:

1. Protect from Malware

The first thing to protect your Samsung Galaxy S24 smartphone from getting stuck on the boot is to keep it safe from unauthorized and malicious data. The best thing to keep a device secure is to follow all security protocols and avoid bypassing them. If you try downloading something not authorized by the Play Store itself, for instance, an APK, it can make your device vulnerable to malware.

2. Keep Your Device Updated

If you feel frustrated by issues like Samsung Galaxy S24 being stuck on the Android One screen, the best thing to avoid such a problem is to keep your device updated at all costs. Whenever there is an update on your Samsung Galaxy S24 smartphone, make sure to install it on time and properly. Do not leave updates uninstalled for no reason, as they can hinder the Samsung Galaxy S24 device’s speed and performance.

3. Do Not Fool Around with System Files

Changing or modifying system files can be fatal for smartphones. Thus, to keep your Samsung Galaxy S24 safe, you need to keep your hands away from such important files. Modifying a single file can make your device useless or put you in situations like a Samsung Galaxy S24 smartphone stuck on the boot. For that, the best tip is to keep yourself out of engagement.

4. Use Wondershare Dr.Fone To Manage All Data With Ease

As you have observed, the power of Dr.Fone can be a perfect phone manager for you at all times. While providing system repair services, it can also help you manage your device’s data and other statuses. Thus, consider keeping Dr.Fone close to your device and its operations. In this way, you will be able to have complete control over all types of data present in the Samsung Galaxy S24 smartphone.

safe & secure

4,675,795 people have downloaded it

Conclusion

With that, this brings the article on Samsung Galaxy S24 smartphones to a conclusion. If you are still facing issues with your Samsung Galaxy S24 stuck on the “Samsung Galaxy S24” screen, this article is the perfect solution for your problem.

With all the provided methods, we do hope that you will be able to restore the status of your Samsung Galaxy S24 smartphone and make it functional. For the finest results, you have also discovered Dr.Fone – System Repair (Android) as the best solution for repairing such devices.

How To Fix Part of the Touch Screen Not Working on Samsung Galaxy S24

You probably touch the screen of your phone hundreds of times per day. It’s no surprise that smartphone touchscreens are one of the most common components to fail, given their delicate glass construction. However, a part of the touch screen not working on your Samsung Galaxy S24 does not necessarily mean it is a hardware issue. There could be other reasons why your Android’s touch screen stopped responding.

If your phone’s touchscreen frequently fails to respond, there are several things you can try before calling a professional. This article will reveal those proven fixes you can easily perform independently.

Part 1. Why Is Part of My Screen Not Working

There are two possible causes as to why your phone’s touch screen is not working. One is the touch screen may have been damaged, and the other is the Samsung Galaxy S24 device may be experiencing technical difficulties.

If you drop your phone and it becomes stuck against something, the touch screen’s connectivity may fail. Only a part of the touch screen may sometimes become damaged and unresponsive. That may also occur when there is a technical failure, such as the phone hanging. A part of the touch screen not working can occur when malware is downloaded or when phone settings are changed.

Now, the problem can affect any Android phone, and users may encounter the following error messages on their respective phone models:

Samsung Galaxy S24 P40 lite half touch screen not working
Nexus touch screen not working
LG screen is unresponsive to touch
Samsung Galaxy S24 left side of the screen is not working
Redmi’s whole screen is unresponsive to touch

Part 2. Different Types of Touch Screen Issues and What You Should Check Before Fixing

You may experience a variety of touch screens not working on Android issues:

A certain part of the touch screen is not working.
Your touches do not register on the touch screen.
The touch screen incorrectly responds to your touch.
Half touch screen is not working.
The touch screen becomes frozen or hangs.
The screen flashes, flickers, or remains blank.
Theleft side of the phone screen is not working.

Before proceeding to how to fix an unresponsive touch screen on an Android device, you should complete the following steps:

Examine the screen of your device. Check to see if it is cracked or chipped.
If the screen is damaged, it must be replaced.
Remove the Samsung Galaxy S24 device cover and screen protector if they are not damaged.
If there is a sticker on the Samsung Galaxy S24 device screen, you must remove it.
Before continuing, make sure your screen is spotless.

Part 3. How To Fix Part of the Touch Screen Not Working (No Physical Damage)

If you have already tried running the Samsung Galaxy S24 device in diagnostic mode and verified that it is not physically damaged, then the problem is most likely technical. If your Samsung Galaxy S24’s screen is not responding to touches for technical reasons, follow the methods below to resolve the issue.

Restart Your Device

When your touch screen stops working, the first thing you should do is restart your device. The operation is known as soft resetting. You cannot turn your device off from the option on the screen because the touch screen is not responding. Here are the steps to take.

Step 1: Hold the “Power” button until the Samsung Galaxy S24 device turns off.

Tip: If you hold down the power button for a few seconds, you will see the “Power Off” and “Restart” options on the screen. You can’t use it because the entire screen isn’t responding. Hence, you should press and hold the “Power” button for as long as necessary.

Step 2: When the Samsung Galaxy S24 device turns off, wait a few seconds.

Step 3: Press and hold the “Power” button to restart the Samsung Galaxy S24 device.

Check to see if the Android auto touch screen is not working problem has been resolved. Otherwise, proceed with the following methods.

Turn On Safe Mode

You should switch to Safe mode whenever an application or piece of software causes a problem on your device. Only the most fundamental system components are loaded and used when operating in Safe mode.

If your touch screen is functional in safe mode, the issue is most likely internal. You can quickly fix the Android touchscreen issue by following the prompts given below to activate the safe mode:

Step 1: To force a restart, press and hold the Samsung Galaxy S24 device’s “Power” button for an extended period.

Step 2: Maintain pressure on the “Power” button. Take your finger off it once you see the manufacturer’s logo.

Step 3: When you let go of the “Power” button, press and hold the “Volume Down” button. After that, a “Safe Mode” label will appear in your screen’s lower-left corner.

Turn Off Developer Options

Every smartphone is bound to have limitations. However, smartphone makers include a “Developer Options” menu for advanced users. Here, restrictions are removed, and user preferences can be customized.

If you enable Developer Options on some Android devices, they may stop working properly. If you have recently activated Developer Options and your touchscreen is no longer responding as expected, you should disable it. To do so, follow the instructions below:

Step 1: Launch the Settings app on your device.

Step 2: Select the System menu item, which usually locates at the bottom of the screen.

Step 3: Tap the Advanced options menu, then select Developer Options.

Step 4: You will then find the switch to turn it on or off. Disable itby toggling the button off.

Step 5: Restart your device to check if the part of the touch screen not working issue has been resolved.

Reset Device to Factory Settings

Resetting your device to its factory settings will return it to its state when you first unboxed it. All your phone’s data and installed apps will be erased, including any malware on your device that may be causing the issue to occur. Here’s how to restore your device to factory settings:

Step 1: Since your touch screen is not working, you can factory reset it using Google’s Find My Device web service.

Step 2: Go to Find My Device from any device and sign in to the Google account associated with the damaged screen device.

Step 3: After successfully logging in, you will see your device’s name. Select the Erase Device option.

Step 4: Confirm by pressing the Erase Device button.

Tip: Since all your data will be removed, it’s recommended to back up your data first before resetting your device to factory settings.

Part 4. Fix Using a Third-Party App – Wondershare Dr.Fone

If you’ve exhausted all other options and still can’t fix your Android’s part of the touch screen not working issue, it’s time to resort to Dr.Fone – System Repair! It allows you to repair Android system issues with a single click.

Many users have reported exceptions on their Android devices, such as touch screen failure, black screen of death, system UI failure, app crashing, etc. And in this case, people should seek an Android repair tool.

Dr.Fone – System Repair has made it easier than ever for Android users experiencing technical issues with their device, including an unresponsive touch screen, among other system issues. The best part is that no data will be lost while repairing Android system issues.

Follow the steps given below on how to use Wondershare Dr.Fone System Repair for Android:

Step 1: Select the System Repair option from the main window after starting Dr. Fone.

Step 2: Connect your Samsung Galaxy S24 or tablet to the computer using the appropriate cable. Choose Android Repair from the three options shown on the left side of the screen.

Step 3: The device information screen will appear in the next window. There, input your device’s unified brand, name, model, country/region, and carrier information. Then click Next after you confirm the warning.

The Android repair procedure may wipe out all data on your device. To confirm and proceed, enter “000000”.

Note: It is strongly advised that you back up your Android data before attempting Android repair.

Step 4: Before repairing your Samsung Galaxy S24, you must boot it into Download mode. To boot your Samsung Galaxy S24 or tablet into DFU mode, follow the steps below:

For a device that has a Home button:

Turn off your phone or tablet.
Hold the Volume Down, Home, and Power buttons for 5 to 10 seconds.
To enter Download mode, release all the buttons and press the Volume Up button.

For a device that lacks a Home button:

Turn off the Samsung Galaxy S24 device.
Hold the Volume Down, Bixby, and Power buttons for 5 to 10 seconds.
To enter Download mode, release all the buttons and press the Volume Up button.

Step 5: Then press the Next button. The program will then download the firmware. After downloading and verifying the firmware, the program will automatically repair your Samsung Galaxy S24. And in a while, your Samsung Galaxy S24’s system issues will be resolved.

Supported OS

Check Dr.Fone’s supported operating systems below before using the application to fix your mobile technical issues.

Platform	Supported OS
Windows	Windows 11/10/8.1/8/7/Vista/XP
Mac	Mac 14/13/12/11/10.15/10.14/X/10.13/10.12/10.11/10.10/10.9/10.8

Key Features

Dr.Fone – System Repair is a data management and recovery tool that contains several toolkits in one program, each designed to repair a specific phone problem. Check out its key features below:

One-click Android Repair Tool
Troubleshoots and repairs a wide range of Android system problems, including black screen of death, Play Store not working, apps crashing, phone stuck in a boot loop, and bricked Android issues
A high success rate for fixing Android system issues
Fixes Android system back to normal

Pros

Here are the advantages of using Dr.Fone – System Repair:

Highly intuitive UI/UX/. No need for any skill to operate it
Provides a comprehensive set of toolkits, including advanced data recovery and system repair
Data management is simple and seamless for both Android and iOS devices
Data backup with Dr. Fone is simple and quick.

Cons

Check below to know Dr.Fone – System Repair’s limitations:

Depending on the toolkit required, the program can be costly.

safe & secure

Conclusion

Fixing an Android part of the touch screen not working issue can be quickly done with just a few fixes you can do on your own. However, there may be times when the solutions provided above may not work, and the worst part is factory resetting your phone erases all your data.

That’s why Dr.Fone – System Repair might be your best solution. It has all the tools you need to keep your Samsung Galaxy S24 100%. Not only that, but with Dr.Fone, you can repair your Android system issues without dealing with any data loss.

Fix Guide

How To Unbrick a Dead Samsung Galaxy S24 | Dr.fone