How To Unbrick a Dead Samsung Galaxy XCover 6 Pro Tactical Edition | Dr.fone

How To Unbrick a Dead Samsung Galaxy XCover 6 Pro Tactical Edition | Dr.fone

Abel Lv11

How To Unbrick a Dead Samsung Galaxy XCover 6 Pro Tactical Edition

Discovering your phone died, especially among Samsung Galaxy XCover 6 Pro Tactical Edition models, can be disheartening. Looking online for ways to unbrick your Oneplus 8T can take up so much of your time. The unavailability of your device can disrupt your routine and connectivity. However, unbricking is the crucial solution to regain the functionality of your Samsung Galaxy XCover 6 Pro Tactical Edition device.

This guide teaches effective methods to unbrick your Samsung Galaxy XCover 6 Pro Tactical Edition. The page will also discuss the early warning signs and healthy habits to prolong your Samsung Galaxy XCover 6 Pro Tactical Edition. Read below to learn more.

Part 1. Early Warning Signs of a Hard-bricked One Plus Device

When a phone “bricks,” the Samsung Galaxy XCover 6 Pro Tactical Edition device becomes completely unusable and non-functional. It essentially turns into a “brick.” A bricked Samsung Galaxy XCover 6 Pro Tactical Edition device can be preceded by certain warning signs that you should be attentive to. Here are some of them below.

  • **Corrupted Device and Boot Failures.**If your Samsung Galaxy XCover 6 Pro Tactical Edition freezes or fails to boot up properly, it can indicate underlying software issues that might lead to bricking.
  • **Inability to Enter Fastboot Mode.**If you find it increasingly challenging to access the fastboot mode, it could signify impending trouble.
  • **Consistent Black Screens.**Experiencing recurring black screens could indicate problems within the operating system. In the long run, this might escalate to bricking.
  • **Unexpected Reboots and Crashes.**Frequent and unprovoked reboots, app crashes, and system instability might point toward software inconsistencies. Similar to consistent black screens, this could eventually lead to bricking.

Common Reasons for Your Samsung Galaxy XCover 6 Pro Tactical Edition Phone To Be Bricked

Understanding the factors that can trigger bricking in Samsung Galaxy XCover 6 Pro Tactical Edition devices is essential for preventing such scenarios.

Failed Updates or Interrupted Installations

When a firmware update is interrupted due to power loss, sudden device shutdown, or other disruptions, it can result in incomplete software installation and potential bricking.

Unauthorized User Modifications

Engaging in root access, flashing custom ROMs, or applying unsupported system modifications can destabilize the Samsung Galaxy XCover 6 Pro Tactical Edition device’s software, paving the way for bricking.

Incorrect Bootloader Unlocking

Mishandling the process of unlocking the bootloader, a crucial step for customization can lead to system inconsistencies and eventual bricking.

Compatibility Issues With Custom Software

Installing unofficial custom software, such as custom recoveries or third-party kernels, might not be compatible with the Samsung Galaxy XCover 6 Pro Tactical Edition device’s hardware or official software. That can cause conflicts that can lead to bricking.

Malware or Virus Infiltration

The presence of malicious software can cause significant disruptions to the Samsung Galaxy XCover 6 Pro Tactical Edition device’s functioning. It can lead to bricking if left unchecked.

oneplus 8t out the box

Part 2. How To Unbrick One Plus Device Using Various Methods

The solutions below to unbrick your Oneplus are helpful methods to revive your device. Here’s an overview of these methods.

Method 1. Restore With Recovery Mode

Restoring using Recovery Mode can solve most problems that cannot be solved with a normal phone restart. Here’s how.

  • Step 1: Turn off your Samsung Galaxy XCover 6 Pro Tactical Edition device. Press and hold the Power button and Volume Down until the Samsung Galaxy XCover 6 Pro Tactical Edition logo is displayed.

oneplus recovery mode access

  • Step 2: Move through the menu using the Volume Up and Volume Down buttons until you reach Recovery Mode. Press the Power button to choose it.
  • Step 3: Select the Wipe data/factory reset option. Choose Yes to proceed and wait for the process to finish. Choose Reboot system now to see the results.

wipe date on oneplus

Method 2. Contact the Manufacturer

Engaging Samsung Galaxy XCover 6 Pro Tactical Edition’s official support can provide insights and potential solutions. This is advantageous if your device is under warranty.

Method 3. Professional Repair Shops

Certified repair shops have the expertise to diagnose and address bricking issues, offering tailored solutions.

Method 4. Software Tools

Leveraging specialized software tools like Wondershare Dr.Fone - System Repair (Android) simplifies the process, even for non-technical users.

Part 3. Healthy Habits To Consider To Prolong Your One Plus

Maintaining the longevity of your Samsung Galaxy XCover 6 Pro Tactical Edition device requires adopting proactive habits. Here are vital tips to consider.

  • **Regular Software Updates.**Keep your Samsung Galaxy XCover 6 Pro Tactical Edition up to date with the latest firmware releases. These updates often include security patches, bug fixes, and feature enhancements contributing to overall device stability.
  • **Battery Care.**Avoid frequent deep discharges and overcharging. Use original charging accessories and refrain from exposing the Samsung Galaxy XCover 6 Pro Tactical Edition device to extreme temperatures.
  • **App Management.**Review and uninstall apps you no longer use. This reduces clutter and conserves system resources, promoting smoother device operation.
  • **Cache and Storage Cleanup.**Clear app caches and delete unnecessary files from your device. It optimizes storage space and prevents sluggishness caused by excessive data accumulation.
  • **Screen Protection.**Apply a screen protector and sturdy phone case to shield your device from scratches, cracks, and impacts. This safeguards the physical integrity of your Samsung Galaxy XCover 6 Pro Tactical Edition.
  • **Safe Charging Practices.**Avoid using your device while charging, as this generates excess heat. Also, refrain from using non-certified chargers, which can harm the battery and device components.
  • **Avoid Overloading the Samsung Galaxy XCover 6 Pro Tactical Edition device.**Limit multitasking and avoid running too many apps simultaneously. This minimizes strain on the Samsung Galaxy XCover 6 Pro Tactical Edition device’s RAM and processor, ensuring smoother performance.
  • **Privacy and Security.**Implement robust, unique passwords and enable biometric authentication methods. Regularly review app permissions to enhance data privacy.

taking care of your oneplus

Tips: Unlock Your One Plus 6, 8T, or 10 Pro With Dr.Fone - Screen Unlock (Android)

Dr.Fone - Screen Unlock (Android) is powerful software designed to unlock Samsung Galaxy XCover 6 Pro Tactical Edition devices quickly. This tool is compatible with various Samsung Galaxy XCover 6 Pro Tactical Edition models, including the Samsung Galaxy XCover 6 Pro Tactical Edition 6, Samsung Galaxy XCover 6 Pro Tactical Edition, and Samsung Galaxy XCover 6 Pro Tactical Edition 10 Pro, ensuring a wide support reach.

arrow

Dr.Fone - Screen Unlock (Android)

Unlock Samsung Galaxy XCover 6 Pro Tactical Edition Without Password

  • Unlock your Samsung Galaxy XCover 6 Pro Tactical Edition quickly and securely
  • Easily remove passwords and screen locks of all types
  • Enjoy a streamlined experience with no technical background required
  • Feel confident with solutions backed by a high success rate

3,016,652 people have downloaded it

How To Unlock Your One Plus With Dr.Fone - Screen Unlock (Android)

Below is a guide on unbricking the Samsung Galaxy XCover 6 Pro Tactical Edition models using Dr.Fone - Screen Unlock (Android).

Step 1: Access Screen Unlock > Android

Navigate to the Screen Unlock section and select Android. Proceed by clicking on the Unlock Android Screen option.

access remove screen lock function

Step 2: Choose Your Device Brand and Initiate Data Wipe

Identify your device brand for unlocking the screen. After selecting your device brand, you will be prompted to enter a specific mode. Once in this mode, Dr.Fone will commence the Android screen unlock process.

select brand in use

Step 3: Successful Screen Unlock

Allow the unlock process to run its course. If unsuccessful, click ‘Try Again’ for a second attempt. Upon successful screen unlock, click ‘Done’.

android screen unlocked

Safe download safe & secure

You May Also Like:

How To Fix iPhone Bricked After iOS 17/iOS 16/iOS 15 Update

iPhone Got Bricked? Here Is The Real Fix To Unbrick It!

How to Fix It If Your Samsung Galaxy XCover 6 Pro Tactical Edition Phone Got Bricked?

How to Fix the Soft Bricked Android Phone?

Conclusion

For Samsung Galaxy XCover 6 Pro Tactical Edition owners, your device’s revival rests in your hands. By embracing the abovementioned methods, you can reclaim your device from its bricked state. Act decisively to unbrick your Samsung Galaxy XCover 6 Pro Tactical Edition device and relish its seamless performance again.

For those who find themselves locked out of their Samsung Galaxy XCover 6 Pro Tactical Edition devices, there’s a reliable solution at your fingertips. Try Dr.Fone - Screen Unlock (Android) to regain access to your device swiftly and securely.

Safe download safe & secure

Calls on Samsung Galaxy XCover 6 Pro Tactical Edition Go Straight to Voicemail? 12 Fixes

Have you ever experienced incoming calls to your phone go straight to voicemail without ringing? It can be frustrating, especially if you’re expecting an important call. It could be due to simple things like turning down the volume or forgetting to turn off the Do Not Disturb mode. In other cases, it might be because you accidentally blocked the caller’s number.

In most cases, incoming calls going to voicemail without ringing are common. However, if it’s happening frequently or for all calls, your phone may have a problem.

This article will discuss why incoming phone calls go straight to voicemail and how to fix the problem. We’ll also show you how to use Wondershare Dr.Fone, a powerful Android System Repair tool, to solve such issues. So, if you’re uncertain why that last call went straight to voicemail, keep reading, and we’ll cover everything you need to know.

phone voicemail notification representation

Part 1: Not Ringing? Here’s Why Calls on Your Phone Go Straight to Voicemail

If an incoming call to your cell phone goes straight to voicemail without ringing, there could be a few reasons. Here’s what to look for and what you should do to fix it:

  1. Turn Off Do Not Disturb (DND) Mode

DND mode is a feature that silences all incoming calls, notifications, and alerts. If DND mode is enabled, your cell phone goes straight to voicemail when someone calls. To turn off DND mode, swipe down from the top of the screen to open the notification settings panel, then tap the Do not disturb icon.

do not disturb mode not enabled

Here’s an alternative way:

  • Step 1: Open the Settings app and go to Notifications.
  • Step 2: Tap Do not disturb.

notifications settings interface

  • Step 3: Toggle Do Not Disturb offto disable the mode.
  1. Turn Off Call Forwarding

One reason calls go straight to voicemail without ringing is if you enabled call forwarding. Call forwarding is a feature that redirects incoming calls to another number. To turn off call forwarding:

  • Step 1: Open the Phone Dialer app on your device, then tap the menu icon and select Settings.

phone dial app settings

  • Step 2: Navigate to Supplementary services > Call forwarding.

call settings supplementary services

  1. Disable Call Barring

If a phone call went straight to voicemail, another possible explanation is the call barring. It is a feature that restricts calls from being made or received on your phone. If activated, it can cause incoming calls to a phone to go straight to voicemail. To turn off call barring on Samsung Galaxy XCover 6 Pro Tactical Edition devices:

  • Step 1: Open the Phone Dialer app, then tap the menu icon in the top right corner.
  • Step 2: Go to Settings > Supplementary services > Call barring, then tap OK.
  • Step 3: Select Voice call, then turn off your preferred outgoing and incoming calls. When prompted, enter 0000 as a password.

call barring settings interface

  1. Update Your Phone’s Software

Sometimes, software bugs can cause problems with incoming calls, which may be why your last incoming call went straight to voicemail. If your phone runs outdated software, try updating it to the latest version.

To check for updates, open the Settings app and go to Software update or System update. For a seamless update experience, follow the step-by-step instructions on your mobile screen.

software update settings

  1. Reset Network Settings

If the incoming calls on your phone go straight to voicemail, consider resetting your phone’s network settings. Network settings control how your phone connects to the cellular network. If these settings are not set up correctly, incoming calls may not be able to reach your device.

Note: Resetting your network settings will erase any saved Wi-Fi networks and Bluetooth pairings, requiring you to re-enter them after the reset is complete.

To reset your network settings on most Android devices:

  • Step 1: Open the Settings app on your smartphone, then tap System or General Management.
  • Step 2: Go to Reset > Reset Network Settings and confirm the action.

phone reset network settings

  1. Turn Off Bluetooth

When Bluetooth is on, it can interfere with your device’s ability to receive calls, causing them to go straight to voicemail without ringing. To turn off Bluetooth on an Android device, you can do one of the following:

  • Swipe down from the top of the screen to open the Quick Settingspanel, then tap the Bluetooth icon to turn it off.

bluetooth not enabled

  • Go to Settings> Connections > Bluetooth and toggle the switch off.

turn off bluetooth on settings app

It should help ensure that calls come through to your phone instead of going to voicemail.

  1. Check Airplane Mode

If turning off Bluetooth didn’t solve the issue, another possible cause could be that your phone is in Airplane Mode. Airplane Mode turns off all wireless connections on your phone, including cellular service, which can cause calls to dial straight to voicemail. There are two ways to turn off Airplane mode on Android:

Using the Settings app:

  • Step 1: Open the Settings app.
  • Step 2: Tap Network & internet.
  • Step 3: Toggle off Airplane mode or Flight mode.

Using the Quick Settings panel:

  • Step 1: Swipe down from the top of the phone screen to access the Quick Settings panel.
  • Step 2: Look for the Airplane mode or Flight mode icon, then tap it to turn it off.

airplane mode on

  1. Check Blocked Numbers

“My boyfriend’s phone goes straight to voicemail when someone is calling. Any idea why that might be?”

Do you also find yourself asking what does it mean? It could be that he has blocked that phone number. To check this:

  • Step 1: Open the Phone dialer app.
  • Step 2: Tap the menu icon in the top right corner and select Settings.
  • Step 3: Tap Block numbers. If you find the number in the blocked list, remove it to ensure that their calls come through to the phone.

block numbers on the phone

If you still have trouble reaching your boyfriend, try calling him from a different number. If your call didn’t go through, you know that he hasn’t blocked your number and that there may be another issue with his phone.

  1. Turn Off Google One VPN

If you’re using Google One VPN, try turning it off to see if that fixes the problem. Some users have reported that Google One VPN can cause incoming calls to a phone to go straight to voicemail. To turn off Google One VPN:

  • Step 1: Open the Google One app on your Samsung Galaxy XCover 6 Pro Tactical Edition.
  • Step 2: At the bottom, go to the Benefits tab, then tap View Details below the Online protection with a VPN section.

google one app interface

  • Step 3: Toggle off Enable VPN.

turn off google one vpn

  1. Contact Your Carrier

If your phone calls go straight to voicemail after trying all the above, contact your carrier for help. They may be able to troubleshoot the problem or determine if there is a service outage in your area.

And if your carrier confirms that there is no service outage or billing-related block, the problem may be with your phone itself. You may need to try resetting your phone to factory settings or taking it to a repair shop.

  1. The Caller Used Ringless Voicemail

Ringless voicemail is a service that allows businesses to bypass your phone’s ringtone and send you pre-recorded messages directly to voicemail. Ringless voicemail is often used for marketing purposes. If you think you’re receiving ringless voicemail calls, you can contact the company calling you and ask them to remove you from their list.

Part 2: Not Clear About the Root Cause? Troubleshoot Directly by Wondershare Dr.Fone

If you’re unsure what’s causing your calls to go straight to voicemail, you can try using the Dr.Fone System Repair tool. This software can scan and repair your phone for any underlying problems, which may fix the issue and get your calls ringing again.

Dr.Fone supports over 1000 Android models, including unlocked Samsung Galaxy XCover 6 Pro Tactical Edition models and models from carriers like AT&T and Vodafone. It has an intuitive interface and is easy to use, even for beginners. Learn below the steps on how to use Dr.Fone System Repair to fix incoming calls that dial straight to voicemail:

  • Step 1: Download Dr.Fone on your computer, then launch it once installed.

safe Download safe & secure

4,118,635 people have downloaded it

  • Step 2: Connect your smartphone to your desktop or computer using a USB cable. Next, from the Toolbox homepage, select System Repair.

dr.fone system repair toolbox

  • Step 3: Select Android as the Samsung Galaxy XCover 6 Pro Tactical Edition device type.

select device type on dr.fone

  • Step 4: Click Start to begin repairing your smartphone.

dr.fone start system repair

  • Step 5: Select the Samsung Galaxy XCover 6 Pro Tactical Edition device details on the Name, Model, Country, and Carrier drop-down lists. Next, select the agreement checkbox, then click Next to proceed.

choose device information to repair

  • Step 6: Follow the in-app instructions to enter Download mode on your Samsung Galaxy XCover 6 Pro Tactical Edition, then click Next.

android devices to enter download mode

  • Step 7: Wait while the app downloads the firmware; once done, click Fix Now.

firmware downloaded ready to use

  • Step 8: Enter the code in the input box to verify the Samsung Galaxy XCover 6 Pro Tactical Edition device information in the dialogue box, then click Confirm.

confirm device information

  • Step 9: The app will start repairing the system issue on your Samsung Galaxy XCover 6 Pro Tactical Edition. Once completed, your app should restart, then click Done to close the app.

repaired android device system issue

You May Also Like:

Top 5 Best Android System Repair Apps

How to Fix It: Android Stuck on Boot Screen?

How to Flash Dead Android Phone Safely

Conclusion

When your phone calls go straight to voicemail without ringing, it can be a frustrating and disruptive experience. Not only do you miss important calls from work, friends, or family, but it also leaves you feeling disconnected and out of the loop. As a temporary measure to avoid missing important calls, check your voicemail regularly.

For a prompt solution, consider using Dr.Fone if incoming calls on your phone go straight to voicemail. It is a powerful mobile solution that can also address other system problems, including stuck boot loops, app crashes, black screens, and bricked devices. If you consistently experience this issue, it’s advisable to reach out to a professional for assistance.

safe Download safe & secure

4,215,287 people have downloaded it

Home Button Not Working on Samsung Galaxy XCover 6 Pro Tactical Edition? Here Are Real Fixes

There is no doubt that it is quite frustrating when your device buttons, such as home and back don’t work properly. The reasons can be software as well as hardware issues. If you are wondering whether there is any solution to fix this problem, then you’ve come to the right place. Firstly, yes some methods can probably help you to come out of this issue. Here, in this guide, we have covered various solutions you can try to resolve the “home button not working Android” problem no matter whether it is due to software or hardware reason.

Part 1: 4 Common Measures to Fix Home Button Not Working Android

Here, we are going to mention four common methods that you can try to resolve the home button problem on your Samsung Galaxy XCover 6 Pro Tactical Edition with ease.

1.1 One click to fix Android Home Button Not Working

[Try It Free](https://download.wondershare.com/drfone_repair_full3371.exe)

When it comes to the home button not working Samsung Galaxy XCover 6 Pro Tactical Edition problem, the most common reason is the unknown system issues. In such a scenario, the best solution is using Dr.Fone - System Repair (Android) software to repair your Android system to normal in one click. This tool is powerful enough to resolve various Android issues within a few minutes.

Dr.Fone - System Repair (Android)

Android repair tool to fix home button not working on Android

  • The tool can help you to fix the Android operating system in a wide range of scenarios.
  • It is compatible with all Samsung Galaxy XCover 6 Pro Tactical Edition devices.
  • There is no need for technical skills to use the software.
  • The software comes with a high success rate for fixing the Android system.
  • It provides easy steps to resolve Android issues.

3981454 people have downloaded it

To learn how to fix home button not working problem, download and install the Dr.Fone - System Repair (Android) software on your computer, follow the below step-by-step guide:

Step 1: To begin with the process, launch the software on your computer and select the “System Repair” option from the software main window.

fix home button not working android

Step 2: Thereafter, connect your Samsung Galaxy XCover 6 Pro Tactical Edition to the computer using a USB cable and select the “Android Repair” tab from the left menu.

home button not working android - connect device

Step 3: Next, you will navigate to a device information page where you have to provide your device information.

home button not working android  - check device info

Step 4: After that, the software will download the appropriate firmware to repair your Android system.

home button not working android - download firmware

Step 5: After downloading the firmware, the software will start the repair process. Wait for a few seconds, the problem should get fixed and your phone will get back to its normal state.

home button not working android - start android repair

1.2 Force Restart your Android

Whenever you encounter with Android virtual soft keys, not working problem, the first thing you should try is to force restart your phone . If the problem is due to a software issue, then it can be probably fixed by simply force restarting your Android.

Here are simple steps on how to force restart on Android:

Step 1: To begin with, press and hold the power button and either volume up or down button at the same time until your device screen goes off.

Step 2: Next, press the power button for a few moments to force restart your device.

home button not working android - force restart

1.3 Restore Factory Settings

If force restarting won’t help you to fix the problem you are facing, it’s time to reset your Samsung Galaxy XCover 6 Pro Tactical Edition to factory settings. The factory reset on an Android device will erase all of your phone settings, third-party apps, user data, and other app data to restore your device to its original manufacturer condition or settings. It means that this can bring back your device to its normal state.

To learn how to restore factory settings, follow the below steps:

Step 1: Go to your ‘Settings” and then, go to “System”>” Advanced”>” Reset options”.

Step 2: Next, tap on “Erase all data”>” Reset phone” to factory reset on your phone. Here, you may need to enter the password or pin or pattern.

Once you are done with the above steps, restart your phone and restore your data and this might be fixed the problem for you. If not, then try the next solution.

home button not working android - factory reset

1.4 Update Android Firmware

It might be the case that your Android firmware is not updated and that’s why you are experiencing the home button not working Android problem. Sometimes, not updating your Android firmware can cause various issues and problems while using your device. So, you should update it, and here are steps on how to do it:

Step 1: Open the Settings and then, go to “About device”. Next, click “System updates”.

Step 2: After that, click “Check for updates” and if updates are available, then download and install it to update your Android version.

home button not working android - update android

Part 2: What if the Home Button fails due to hardware reasons?

When your Android home and back button not working because of hardware reasons, you can’t get the problem resolved by simply rebooting your device. In such cases, you have to use alternative apps to replace the home button.

2.1 Simple Control app

The Simple Control app is the first and foremost solution to fix the Android home button not working issue. With the help of this app, you can fix many soft keys of your device. It is specially designed for Android users facing trouble using home, volume, back, and camera buttons. Plus, the app utilizes Accessibility service, but it doesn’t get access to your sensitive and personal information.

simple control app

Pros:

  • It can easily replace broken and failed buttons.
  • The app is quite easy to use.

Cons:

  • It is not as much efficient as other similar apps available out there.

URL: https://play.google.com/store/apps/details?id=ace.jun.simplecontrol&hl=en_US

2.2 Button Savior app

Button Savior app is one of the ultimate apps that can help you to fix the Android home button not working problem with ease. For this app, root and no root versions are available on the Google Play store. To fix the Home button not working issue, no root version is the right one. But, if you want to fix the Back button or other buttons, then you need to go for the root version.

button savior

Pros:

  • It comes with a root as well as no root version.
  • The app is powerful enough to fix a wide range of buttons.
  • It shows information regarding the date and time and battery.

Cons:

  • The root version of the app can cause data loss.

URL: https://play.google.com/store/apps/details?id=com.smart.swkey" target="_blank” rel=”nofollow

2.3 Navigation Bar (Back, Home, Recent Button) app

Navigation Bar app is another great solution to fix the home button not responding problem. It can replace broken and failed button for users who are facing difficulty using navigation bar panel or buttons not working properly. The app offers numerous features, and it is easy to use.

vavigation bar

Pros:

  • It offers many colors to make an incredible navigation bar.
  • The app provides 15 themes for customization.
  • It comes with the ability to change the size of the navigation bar.

Cons:

  • Sometimes, the navigation bar stopped working.
  • It comes with ads.

URL: https://play.google.com/store/apps/details?id=nu.nav.bar

2.4 Home Button app

Home button app is another remarkable solution to replace broken and failed home buttons for users having trouble while using buttons. With this app, it is quite easy to press or even long press on the home button as assistive touch.

home button app

Pros:

  • You can change the button of color using the app.
  • With the help of it, you can set a vibrate setting on touch.
  • It provides support for many press actions, such as home, back, power menu, etc.

Cons:

  • It doesn’t come with a lot of features, unlike other apps.
  • Sometimes, it shuts down automatically.

URL: https://play.google.com/store/apps/details?id=nu.home.button

2.5 Multi-action Home Button app

Is your Android physical home button is broken or dead? If yes, then the Multi-action Home Button app can help you to fix it with ease. With the help of it, you can create a button in centre-bottom of your device screen, and you can also add numerous actions to that button.

home button not working android - Multi-action Home Button app

Pros:

  • It provides various actions with the button.
  • It is very simple and easy to use.

Cons:

  • The app’s very useful feature comes with its pro version.

URL: https://play.google.com/store/apps/details?id=com.home.button.bottom

Conclusion

Hopefully, the methods covered in this post helps you to fix Android home and back button not working problem for you. If it is a system issue, then the best thing you can do is to take advantage of Dr.Fone - System Repair (Android) software. It can surely help you to fix your Android system to normal within a few minutes.


Also read:

  • Title: How To Unbrick a Dead Samsung Galaxy XCover 6 Pro Tactical Edition | Dr.fone
  • Author: Abel
  • Created at : 2024-12-12 16:29:35
  • Updated at : 2024-12-16 16:06:26
  • Link: https://fix-guide.techidaily.com/how-to-unbrick-a-dead-samsung-galaxy-xcover-6-pro-tactical-edition-drfone-by-drfone-fix-android-problems-fix-android-problems/
  • License: This work is licensed under CC BY-NC-SA 4.0.
On this page
How To Unbrick a Dead Samsung Galaxy XCover 6 Pro Tactical Edition | Dr.fone