How To Unbrick a Dead Vivo Y100A

Discovering your phone died, especially among Vivo Y100A models, can be disheartening. Looking online for ways to unbrick your Oneplus 8T can take up so much of your time. The unavailability of your device can disrupt your routine and connectivity. However, unbricking is the crucial solution to regain the functionality of your Vivo Y100A device.

This guide teaches effective methods to unbrick your Vivo Y100A. The page will also discuss the early warning signs and healthy habits to prolong your Vivo Y100A. Read below to learn more.

Part 1. Early Warning Signs of a Hard-bricked One Plus Device

When a phone “bricks,” the Vivo Y100A device becomes completely unusable and non-functional. It essentially turns into a “brick.” A bricked Vivo Y100A device can be preceded by certain warning signs that you should be attentive to. Here are some of them below.

**Corrupted Device and Boot Failures.**If your Vivo Y100A freezes or fails to boot up properly, it can indicate underlying software issues that might lead to bricking.
**Inability to Enter Fastboot Mode.**If you find it increasingly challenging to access the fastboot mode, it could signify impending trouble.
**Consistent Black Screens.**Experiencing recurring black screens could indicate problems within the operating system. In the long run, this might escalate to bricking.
**Unexpected Reboots and Crashes.**Frequent and unprovoked reboots, app crashes, and system instability might point toward software inconsistencies. Similar to consistent black screens, this could eventually lead to bricking.

Common Reasons for Your Vivo Y100A Phone To Be Bricked

Understanding the factors that can trigger bricking in Vivo Y100A devices is essential for preventing such scenarios.

Failed Updates or Interrupted Installations

When a firmware update is interrupted due to power loss, sudden device shutdown, or other disruptions, it can result in incomplete software installation and potential bricking.

Unauthorized User Modifications

Engaging in root access, flashing custom ROMs, or applying unsupported system modifications can destabilize the Vivo Y100A device’s software, paving the way for bricking.

Incorrect Bootloader Unlocking

Mishandling the process of unlocking the bootloader, a crucial step for customization can lead to system inconsistencies and eventual bricking.

Compatibility Issues With Custom Software

Installing unofficial custom software, such as custom recoveries or third-party kernels, might not be compatible with the Vivo Y100A device’s hardware or official software. That can cause conflicts that can lead to bricking.

Malware or Virus Infiltration

The presence of malicious software can cause significant disruptions to the Vivo Y100A device’s functioning. It can lead to bricking if left unchecked.

Part 2. How To Unbrick One Plus Device Using Various Methods

The solutions below to unbrick your Oneplus are helpful methods to revive your device. Here’s an overview of these methods.

Method 1. Restore With Recovery Mode

Restoring using Recovery Mode can solve most problems that cannot be solved with a normal phone restart. Here’s how.

Step 1: Turn off your Vivo Y100A device. Press and hold the Power button and Volume Down until the Vivo Y100A logo is displayed.

Step 2: Move through the menu using the Volume Up and Volume Down buttons until you reach Recovery Mode. Press the Power button to choose it.
Step 3: Select the Wipe data/factory reset option. Choose Yes to proceed and wait for the process to finish. Choose Reboot system now to see the results.

Method 2. Contact the Manufacturer

Engaging Vivo Y100A’s official support can provide insights and potential solutions. This is advantageous if your device is under warranty.

Method 3. Professional Repair Shops

Certified repair shops have the expertise to diagnose and address bricking issues, offering tailored solutions.

Method 4. Software Tools

Leveraging specialized software tools like Wondershare Dr.Fone - System Repair (Android) simplifies the process, even for non-technical users.

Part 3. Healthy Habits To Consider To Prolong Your One Plus

Maintaining the longevity of your Vivo Y100A device requires adopting proactive habits. Here are vital tips to consider.

**Regular Software Updates.**Keep your Vivo Y100A up to date with the latest firmware releases. These updates often include security patches, bug fixes, and feature enhancements contributing to overall device stability.
**Battery Care.**Avoid frequent deep discharges and overcharging. Use original charging accessories and refrain from exposing the Vivo Y100A device to extreme temperatures.
**App Management.**Review and uninstall apps you no longer use. This reduces clutter and conserves system resources, promoting smoother device operation.
**Cache and Storage Cleanup.**Clear app caches and delete unnecessary files from your device. It optimizes storage space and prevents sluggishness caused by excessive data accumulation.
**Screen Protection.**Apply a screen protector and sturdy phone case to shield your device from scratches, cracks, and impacts. This safeguards the physical integrity of your Vivo Y100A.
**Safe Charging Practices.**Avoid using your device while charging, as this generates excess heat. Also, refrain from using non-certified chargers, which can harm the battery and device components.
**Avoid Overloading the Vivo Y100A device.**Limit multitasking and avoid running too many apps simultaneously. This minimizes strain on the Vivo Y100A device’s RAM and processor, ensuring smoother performance.
**Privacy and Security.**Implement robust, unique passwords and enable biometric authentication methods. Regularly review app permissions to enhance data privacy.

Tips: Unlock Your One Plus 6, 8T, or 10 Pro With Dr.Fone - Screen Unlock (Android)

Dr.Fone - Screen Unlock (Android) is powerful software designed to unlock Vivo Y100A devices quickly. This tool is compatible with various Vivo Y100A models, including the Vivo Y100A 6, Vivo Y100A, and Vivo Y100A 10 Pro, ensuring a wide support reach.

Dr.Fone - Screen Unlock (Android)

Unlock Vivo Y100A Without Password

Unlock your Vivo Y100A quickly and securely
Easily remove passwords and screen locks of all types
Enjoy a streamlined experience with no technical background required
Feel confident with solutions backed by a high success rate

3,016,652 people have downloaded it

How To Unlock Your One Plus With Dr.Fone - Screen Unlock (Android)

Below is a guide on unbricking the Vivo Y100A models using Dr.Fone - Screen Unlock (Android).

Step 1: Access Screen Unlock > Android

Navigate to the Screen Unlock section and select Android. Proceed by clicking on the Unlock Android Screen option.

Step 2: Choose Your Device Brand and Initiate Data Wipe

Identify your device brand for unlocking the screen. After selecting your device brand, you will be prompted to enter a specific mode. Once in this mode, Dr.Fone will commence the Android screen unlock process.

Step 3: Successful Screen Unlock

Allow the unlock process to run its course. If unsuccessful, click ‘Try Again’ for a second attempt. Upon successful screen unlock, click ‘Done’.

safe & secure

You May Also Like:

How To Fix iPhone Bricked After iOS 17/iOS 16/iOS 15 Update

iPhone Got Bricked? Here Is The Real Fix To Unbrick It!

How to Fix It If Your Vivo Y100A Phone Got Bricked?

How to Fix the Soft Bricked Android Phone?

Conclusion

For Vivo Y100A owners, your device’s revival rests in your hands. By embracing the abovementioned methods, you can reclaim your device from its bricked state. Act decisively to unbrick your Vivo Y100A device and relish its seamless performance again.

For those who find themselves locked out of their Vivo Y100A devices, there’s a reliable solution at your fingertips. Try Dr.Fone - Screen Unlock (Android) to regain access to your device swiftly and securely.

safe & secure

8 Solutions to Solve YouTube App Crashing on Vivo Y100A

YouTube can be considered among the apps that are widely used by users. And seeing “Unfortunately YouTube has stopped” error on the Android display screen is a thing that you can’t stand. The reasons can be multiple for why YouTube is not working or it keeps crashing. For instance, an outdated app, not updated OS, low storage, or corrupted cache. No matter what has triggered the problem on your device, we have solutions for it. Please read and follow this article to get the problem sorted.

Restart the app

The issues like YouTube keeps crashing are often get disappeared by just quitting and restarting the app. This is helpful to give a fresh start to the app and restarting will bring your device back to normal. Hence, the first resolution we would like to recommend is to restart your app. Follow the steps to do this.

Go to “Settings” and tap “Apps & Notifications” or “Application”.
Choose “YouTube” from the list of apps and open it.
Tap on “Force Close” or “Force Stop”.

You can now restart your device and then launch the app again. Check if this works or not.

Restart the Android

Similar to the app, if you restart the Vivo Y100A device, it will start operating properly making the YouTube app work better than before. So, as the next tip, please restart your device.

Long press the “Power” key.
Press “Restart” and confirm.

Use a VPN

There is a possibility that YouTube is prohibited in your region. Banning some apps is done for some safety reasons. And therefore, you need to check if this is done in your area or not. If yes, then we shouldn’t mention the reason why YouTube is not working on Android. In such a case, use a VPN to access YouTube.

Clear the Cache of YouTube

When the stored cache files start getting crash, the “Unfortunately YouTube has stopped” sort of errors are likely to appear. And therefore, if the above method didn’t work, try this one to get the problem resolved. We are going to clear the cache of YouTube to make it run smoothly.

Go to “Settings” and tap “Apps & Notifications”/”Applications”.
Now, choose “YouTube” from the list of apps.
Open “Storage” and click on “Clear Cache”.

Reinstall YouTube from Play Store

If YouTube keeps crashing, make sure to uninstall and reinstall it from Play Store. Doing this will make the app gets refreshed, remove the glitches, and make it normal as a result. Here are the steps for it.

Firstly, uninstall it by “Settings” > “Apps” > “YouTube” > “Uninstall”.
Now, go to the “Play Store” and search “YouTube”. Tap on “Install”.

Reset Network Settings

The apps that run on the internet might start crashing due to connectivity issues. Therefore, resetting the network settings once can work as a great remedy to follow when YouTube has stopped on your Vivo Y100A. This will remove all your network settings like Wi-Fi passwords etc.

Tap on “Settings” followed by “Backup and reset”.
Look for “Reset Network Settings”.

Note: In some phones, you may find the option in “System” > “Advanced” > “Reset”.

Re-flash the stock ROM of Android in one click

There are times when a corrupted system gives you such errors. And therefore, you should try re-flashing the stock ROM on your Vivo Y100A. Before you wonder how we would like to introduce a highly recommended tool for this. It is Dr.Fone - System Repair (Android). It holds the proficiency to flash the stock ROM in just a click. So, when your YouTube is not responding due to a corrupted system, make use of this tool to get it solved. The benefits associated with this tool are as follows.

Dr.Fone - System Repair (Android)

Android repair tool to flash the stock ROM of Android

Easy to use and quickly fixes the issues
Has the capability to repair any Android system issue
1000+ Android models are supported
Takes no special technical knowledge to use
Higher success rate with promising results

3981454 people have downloaded it

Step 1: Launch the Tool

Start with visiting the website on your PC and downloading the Dr.Fone toolkit. Install and open the tool. Now, from the main screen, choose “System Repair”.

Step 2: Connect Device

With the help of the USB cord, connect your Vivo Y100A to the computer. Click on “Android Repair” now from the left panel.

Step 3: Enter Information

Now, as the next step, you need to make sure of the details of your device. Please enter the name and brand of the phone. The country, region, and career are also to be added. Hit on “Next” once done.

Step 4: Download Firmware

Now, follow the instructions given on the screen according to your device. Click on “Next” and the program will start downloading the firmware.

Step 5: Repair the Issue

Lastly, when the firmware is downloaded, the system will start getting repaired on its own. You need to wait until you are informed about the completion of the process.

Reset Factory Settings of this Device

When nothing works, the last resort you can go with is resetting the Vivo Y100A device to factory state. Doing this will remove any sort of conflicting bugs and other stuff. However, this will remove the data from your device. So make sure to backup everything before going with this method. The steps are:

Open “Settings” and tap “Backup & reset”.
Go to “Factory data reset” and tap “Reset phone”

9 Solutions to Fix Process System Isn’t Responding Error on Vivo Y100A

The “Process system isn’t responding” is a common error that occurs in almost every kind of Android device. Even though most Android smartphone manufacturers have taken a huge leap in the last few years, the operating system still suffers from a few pitfalls. The process system isn’t responding Android is one of those errors that have been reported plenty of times. I definitely understand encountering the ‘Process System Isn’t Responding’ error on your Vivo Y100A can be frustrating.

However, there are several straightforward methods to resolve this issue. This article will provide a step-by-step guide on how to fix the problem and restore your device to normal functionality.

Before solving any Android system issues, try this Android backup software to take a full backup, in case any data loss happens.

Part 1: Reasons for process system isn’t responding error

There could be plenty of reasons for getting the process system is not responding in Android.

Software Glitch: Android systems may experience temporary glitches due to factors like memory management issues, conflicts between apps or services, or system updates.
Insufficient System Resources: Low system storage is another reason for getting the error. If you have too many apps on your phone, then it might take a toll on its memory and generate the “process system isn’t responding” prompt.
Third-Party Apps: Users have also complained that they receive the “Android process system is not responding” error after installing a new app. If you have installed an app from a source other than Google Play Store, then the chances are that you can get this error. Though, even after installing an app from Play Store, there is a bleak probability of facing this issue as well.
Outdated Software: Using outdated apps, particularly system apps or critical components, may lead to compatibility issues with the latest Android version.
System Updates: Most of the time, it happens whenever a device is restarted after updating its Android version. Your device could have undergone a bad update or might have had an unsupported driver. This can result in the occurrence of process system not responding issue.
Corrupt Cache Files: Corrupted cache files can lead to conflicts and result in error.
Overclocking or Modifications: Rooting or modifying the Android device, or applying overclocking settings, can lead to instability and the process system not responding error.
Hardware Issues: Rarely, hardware problems like failing components can interfere with the proper functioning of the system.

No matter what the cause is, there are plenty of ways to overcome this issue. We have listed a handful of them in this post.

Part 2: How to Fix Android Process Not Responding? 8 Fixes

When this error occurs, it can disrupt the normal operation of the Vivo Y100A device, causing apps to freeze or crash. Fortunately, there are several effective methods to address this problem.

Fix 1: Restart your device

This is one of the easiest ways to resolve the process system not responding error. If you are getting this error on your phone, then try to manually restart your device. The way to restart your phone might differ from one device to another. Mostly, it can be done by long-pressing the power button. This will provide different power options. Tap on the “Reboot” one to restart your phone.

If it won’t work, then long press the Power and Volume up buttons at the same time until the screen goes off. Afterward, use the power button again to turn it on.

Fix 2: Reset App Preferences

Sometimes the apps interfere with the Vivo Y100A device’s settings because they were given permission to access specific functions. It is recommended to allow the asked permission precisely because some suspicious apps can also steal your sensitive data. Here are the straightforward instructions you need to follow to reset the app preferences:

Proceed to the “Apps and Notifications” settings from the Settings app. Next, tap the “See All Apps” option and access the “Three Dots” menu. Here select the “Reset App Preferences” option and confirm the process from the confirmation pop-up.

Fix 3: Free Up Space to Make Sure Android Have Enough Internal Memory

In case the Android internal memory is completely filled, it will slow down the processing speed of the Vivo Y100A device. Internal memory is vital for the Vivo Y100A device to run all the background apps or the process required by the OS to run the Vivo Y100A device efficiently. You can follow these steps to free up some space on your Vivo Y100A:

Step 1: Open the Settings app on your Vivo Y100A and access the “Battery and Device Care” option by scrolling down. Next, tap on the “Three Dots” from the top right corner and choose the “Storage Booster” feature.

Step 2: Following this, you can select the data you want to remove from the internal memory. Your device will show the space it will free up for you, and you can press the “Free Up” button to free up the storage.

Fix 4: Enter Safe Mode to Uninstall Suspicious Apps

This issue can also occur if you have installed an app from the Google Play Store with a very low rating or an APK. Unlike Apple App Store, anyone can easily upload their mobile apps on Play Store, so it is important to check the app’s credibility before installing it. Following are the simplified instructions to enter the safe mode and delete all suspicious applications:

Press and hold the “Power” button of your Android and press and hold the “Power Off” option to access the “Safe Mode” feature. Afterward, confirm to enter the safe mode and remove all the suspicious apps from the Vivo Y100A device. You can do this by holding on to the app and selecting the “Uninstall” option from the pop-up options.

Fix 5: Update All Apps on your Device

Updating the apps is crucial for any Android device to work with high efficiency and performance. Apps are developed to make the users’ daily tasks easy to execute. However, there might be some negligence in the development, which can leave some bugs in the app. These bugs are fixed with time by releasing the new version of the app. To update your Android app, proceed with the following step-by-step instructions:

Step 1: Locate the Play Store from the Android home screen and access it. Then, tap the “Profile” icon from the top right corner and proceed to the “Manage apps and devices” option. Afterward, you can check how many app updates are available from the “Updates available” option. To update the apps, you will have to go inside this option.

Step 2: You can tap on the “Update All” button if you want to update all the apps one by one. Otherwise, you can press the “Update” option adjacent to each app name to update the frequently used ones.

Fix 6: Check the SD card

If you are still getting the process system isn’t responding to Android error, then chances are that there could be an issue with your SD card. Firstly, check if your SD card is working fine or not. If it is corrupted, then get another memory card for your phone. Also, it should have a prominent amount of free storage. You might be facing this issue if the SD card has limited free space.

Also, if you are storing apps on the SD card, then your phone might encounter the process isn’t responding issue whenever you run a respective app. Therefore, you should move apps from your SD card to the phone’s internal memory. To do this, go to your phone’s Settings > Application Manager and select any app. If the app is stored on the SD card, then you will get an option of “Move to devise storage”. Just tap on it and manually move every app to your device storage.

Fix 7: One click to fix the process system isn’t responding error

If all the above tricks don’t get your device out of the process system not responding state, then there may be some system issues on your Android. In this case, an Android repair can successfully fix issues like process system isn’t responding.

Note: Android repair may wipe out existing Android data. Back up your Android data before going on.

Dr.Fone - System Repair (Android)

Android repair tool to fix all Android system issues in one click

Fix all Android system issues like the black screen of death, system UI not working, etc.
One-click for Android repair. No technical skills are required.
Supports all the new Vivo Y100A devices like Galaxy S8, S9, S22, etc.
Step-by-step instructions are provided. Friendly UI.

3981454 people have downloaded it

Follow the easy steps below to fix process system isn’t responding error:

1. Download and install the Dr.Fone tool. Then select “System Repair” from the main window.

2. Connect your Vivo Y100A to the PC. After the Vivo Y100A device is detected, select the “Android” tab.

3. Select and confirm the correct device details of your Android. Then boot your Vivo Y100A in download mode and proceed.

4. Download the firmware and click “Fix Now”.

5. After a while, your Android will be repaired with the “process system isn’t responding” error fixed.

safe & secure

Fix 8: Factory reset Android

It is always considered the most used way to factory reset your phone in order to resolve the process system not responding error. Though, this should be your last resort, as it will wipe off your device’s data entirely. Even if you are performing a factory reset, make sure that you back up your data by using a reliable tool like Wondershare Dr.Fone .

Wondershare Dr.Fone

Flexibly Back up and Restore Android Data

Back up Android data to the computer with one click.
Preview and restore selectively the backup to any Android device.
Supports 8000+ Android devices.
There is no data lost during backup, export, or restoration.

3,981,454 people have downloaded it

If your phone is functioning, then you can easily factory reset it by visiting Settings > General > Backup & Restore and selecting the option of “Factory Data Reset”. Your device will display a warning regarding all the data files that would be lost or un-synced. Just tap on the “Reset” button to factory reset your device.

If your device is not functioning or locked, then you can perform the factory reset operation by putting your phone into Recovery mode. Most of the time, it can be done by pressing the Power and Volume up button simultaneously for at least 10 seconds. Though, the key combinations might change from one device to another.

After entering the Recovery mode, go to the “wipe data/factory reset” option using the Volume up and down button. Use the Power button to make a selection. If you get an additional message, then select the “yes – delete all data” option. When it is done, you can simply reboot your device.

Fix 9: Unroot the Vivo Y100A device

It has been further discovered that the process system isn’t responding error is more common in rooted devices. Therefore, if you also have a rooted Android device, then you can choose to unroot it in order to fix this issue. There are different ways to unroot an Android device. One of the easiest ways to do it is by using the SuperSU app.

You can always download either SuperSU or SuperSU Pro app from its website here . Simply install it on our device and launch it whenever you wish to unroot it. Visit its “Settings” tab and select the option of “Full unroot”.

This will generate a warning message regarding all the repercussions of the unrooting process. Just tap on “Continue” to initiate the process.

If you are using an older version of Android, then you might get another pop-up to restore boot images. Simply make the desired selection and start the process. After a while, your device would be restarted the usual way, and it would be unrooted. Most probably, this will resolve the process system isn’t responding error as well.

Now that you know different ways to fix the process system not responding error, you can easily overcome this issue and make the most out of your device. Simply start with the easy fixes, and if they don’t work, then take extreme measures like unrooting your device or restoring it to factory setting. Also, make sure to back up your data before taking any extreme measures.

Fix Guide

How To Unbrick a Dead Vivo Y100A | Dr.fone