How To Unbrick a Dead Vivo Y36

Discovering your phone died, especially among Vivo Y36 models, can be disheartening. Looking online for ways to unbrick your Oneplus 8T can take up so much of your time. The unavailability of your device can disrupt your routine and connectivity. However, unbricking is the crucial solution to regain the functionality of your Vivo Y36 device.

This guide teaches effective methods to unbrick your Vivo Y36. The page will also discuss the early warning signs and healthy habits to prolong your Vivo Y36. Read below to learn more.

Part 1. Early Warning Signs of a Hard-bricked One Plus Device

When a phone “bricks,” the Vivo Y36 device becomes completely unusable and non-functional. It essentially turns into a “brick.” A bricked Vivo Y36 device can be preceded by certain warning signs that you should be attentive to. Here are some of them below.

**Corrupted Device and Boot Failures.**If your Vivo Y36 freezes or fails to boot up properly, it can indicate underlying software issues that might lead to bricking.
**Inability to Enter Fastboot Mode.**If you find it increasingly challenging to access the fastboot mode, it could signify impending trouble.
**Consistent Black Screens.**Experiencing recurring black screens could indicate problems within the operating system. In the long run, this might escalate to bricking.
**Unexpected Reboots and Crashes.**Frequent and unprovoked reboots, app crashes, and system instability might point toward software inconsistencies. Similar to consistent black screens, this could eventually lead to bricking.

Common Reasons for Your Vivo Y36 Phone To Be Bricked

Understanding the factors that can trigger bricking in Vivo Y36 devices is essential for preventing such scenarios.

Failed Updates or Interrupted Installations

When a firmware update is interrupted due to power loss, sudden device shutdown, or other disruptions, it can result in incomplete software installation and potential bricking.

Unauthorized User Modifications

Engaging in root access, flashing custom ROMs, or applying unsupported system modifications can destabilize the Vivo Y36 device’s software, paving the way for bricking.

Incorrect Bootloader Unlocking

Mishandling the process of unlocking the bootloader, a crucial step for customization can lead to system inconsistencies and eventual bricking.

Compatibility Issues With Custom Software

Installing unofficial custom software, such as custom recoveries or third-party kernels, might not be compatible with the Vivo Y36 device’s hardware or official software. That can cause conflicts that can lead to bricking.

Malware or Virus Infiltration

The presence of malicious software can cause significant disruptions to the Vivo Y36 device’s functioning. It can lead to bricking if left unchecked.

Part 2. How To Unbrick One Plus Device Using Various Methods

The solutions below to unbrick your Oneplus are helpful methods to revive your device. Here’s an overview of these methods.

Method 1. Restore With Recovery Mode

Restoring using Recovery Mode can solve most problems that cannot be solved with a normal phone restart. Here’s how.

Step 1: Turn off your Vivo Y36 device. Press and hold the Power button and Volume Down until the Vivo Y36 logo is displayed.

Step 2: Move through the menu using the Volume Up and Volume Down buttons until you reach Recovery Mode. Press the Power button to choose it.
Step 3: Select the Wipe data/factory reset option. Choose Yes to proceed and wait for the process to finish. Choose Reboot system now to see the results.

Method 2. Contact the Manufacturer

Engaging Vivo Y36’s official support can provide insights and potential solutions. This is advantageous if your device is under warranty.

Method 3. Professional Repair Shops

Certified repair shops have the expertise to diagnose and address bricking issues, offering tailored solutions.

Method 4. Software Tools

Leveraging specialized software tools like Wondershare Dr.Fone - System Repair (Android) simplifies the process, even for non-technical users.

Part 3. Healthy Habits To Consider To Prolong Your One Plus

Maintaining the longevity of your Vivo Y36 device requires adopting proactive habits. Here are vital tips to consider.

**Regular Software Updates.**Keep your Vivo Y36 up to date with the latest firmware releases. These updates often include security patches, bug fixes, and feature enhancements contributing to overall device stability.
**Battery Care.**Avoid frequent deep discharges and overcharging. Use original charging accessories and refrain from exposing the Vivo Y36 device to extreme temperatures.
**App Management.**Review and uninstall apps you no longer use. This reduces clutter and conserves system resources, promoting smoother device operation.
**Cache and Storage Cleanup.**Clear app caches and delete unnecessary files from your device. It optimizes storage space and prevents sluggishness caused by excessive data accumulation.
**Screen Protection.**Apply a screen protector and sturdy phone case to shield your device from scratches, cracks, and impacts. This safeguards the physical integrity of your Vivo Y36.
**Safe Charging Practices.**Avoid using your device while charging, as this generates excess heat. Also, refrain from using non-certified chargers, which can harm the battery and device components.
**Avoid Overloading the Vivo Y36 device.**Limit multitasking and avoid running too many apps simultaneously. This minimizes strain on the Vivo Y36 device’s RAM and processor, ensuring smoother performance.
**Privacy and Security.**Implement robust, unique passwords and enable biometric authentication methods. Regularly review app permissions to enhance data privacy.

Tips: Unlock Your One Plus 6, 8T, or 10 Pro With Dr.Fone - Screen Unlock (Android)

Dr.Fone - Screen Unlock (Android) is powerful software designed to unlock Vivo Y36 devices quickly. This tool is compatible with various Vivo Y36 models, including the Vivo Y36 6, Vivo Y36, and Vivo Y36 10 Pro, ensuring a wide support reach.

Dr.Fone - Screen Unlock (Android)

Unlock Vivo Y36 Without Password

Unlock your Vivo Y36 quickly and securely
Easily remove passwords and screen locks of all types
Enjoy a streamlined experience with no technical background required
Feel confident with solutions backed by a high success rate

3,016,652 people have downloaded it

How To Unlock Your One Plus With Dr.Fone - Screen Unlock (Android)

Below is a guide on unbricking the Vivo Y36 models using Dr.Fone - Screen Unlock (Android).

Step 1: Access Screen Unlock > Android

Navigate to the Screen Unlock section and select Android. Proceed by clicking on the Unlock Android Screen option.

Step 2: Choose Your Device Brand and Initiate Data Wipe

Identify your device brand for unlocking the screen. After selecting your device brand, you will be prompted to enter a specific mode. Once in this mode, Dr.Fone will commence the Android screen unlock process.

Step 3: Successful Screen Unlock

Allow the unlock process to run its course. If unsuccessful, click ‘Try Again’ for a second attempt. Upon successful screen unlock, click ‘Done’.

safe & secure

You May Also Like:

How To Fix iPhone Bricked After iOS 17/iOS 16/iOS 15 Update

iPhone Got Bricked? Here Is The Real Fix To Unbrick It!

How to Fix It If Your Vivo Y36 Phone Got Bricked?

How to Fix the Soft Bricked Android Phone?

Conclusion

For Vivo Y36 owners, your device’s revival rests in your hands. By embracing the abovementioned methods, you can reclaim your device from its bricked state. Act decisively to unbrick your Vivo Y36 device and relish its seamless performance again.

For those who find themselves locked out of their Vivo Y36 devices, there’s a reliable solution at your fingertips. Try Dr.Fone - Screen Unlock (Android) to regain access to your device swiftly and securely.

safe & secure

Calls on Vivo Y36 Go Straight to Voicemail? 12 Fixes

Have you ever experienced incoming calls to your phone go straight to voicemail without ringing? It can be frustrating, especially if you’re expecting an important call. It could be due to simple things like turning down the volume or forgetting to turn off the Do Not Disturb mode. In other cases, it might be because you accidentally blocked the caller’s number.

In most cases, incoming calls going to voicemail without ringing are common. However, if it’s happening frequently or for all calls, your phone may have a problem.

This article will discuss why incoming phone calls go straight to voicemail and how to fix the problem. We’ll also show you how to use Wondershare Dr.Fone, a powerful Android System Repair tool, to solve such issues. So, if you’re uncertain why that last call went straight to voicemail, keep reading, and we’ll cover everything you need to know.

Part 1: Not Ringing? Here’s Why Calls on Your Phone Go Straight to Voicemail

If an incoming call to your cell phone goes straight to voicemail without ringing, there could be a few reasons. Here’s what to look for and what you should do to fix it:

Turn Off Do Not Disturb (DND) Mode

DND mode is a feature that silences all incoming calls, notifications, and alerts. If DND mode is enabled, your cell phone goes straight to voicemail when someone calls. To turn off DND mode, swipe down from the top of the screen to open the notification settings panel, then tap the Do not disturb icon.

Here’s an alternative way:

Step 1: Open the Settings app and go to Notifications.
Step 2: Tap Do not disturb.

Step 3: Toggle Do Not Disturb offto disable the mode.

Turn Off Call Forwarding

One reason calls go straight to voicemail without ringing is if you enabled call forwarding. Call forwarding is a feature that redirects incoming calls to another number. To turn off call forwarding:

Step 1: Open the Phone Dialer app on your device, then tap the menu icon and select Settings.

Step 2: Navigate to Supplementary services > Call forwarding.

Disable Call Barring

If a phone call went straight to voicemail, another possible explanation is the call barring. It is a feature that restricts calls from being made or received on your phone. If activated, it can cause incoming calls to a phone to go straight to voicemail. To turn off call barring on Vivo Y36 devices:

Step 1: Open the Phone Dialer app, then tap the menu icon in the top right corner.
Step 2: Go to Settings > Supplementary services > Call barring, then tap OK.
Step 3: Select Voice call, then turn off your preferred outgoing and incoming calls. When prompted, enter 0000 as a password.

Update Your Phone’s Software

Sometimes, software bugs can cause problems with incoming calls, which may be why your last incoming call went straight to voicemail. If your phone runs outdated software, try updating it to the latest version.

To check for updates, open the Settings app and go to Software update or System update. For a seamless update experience, follow the step-by-step instructions on your mobile screen.

Reset Network Settings

If the incoming calls on your phone go straight to voicemail, consider resetting your phone’s network settings. Network settings control how your phone connects to the cellular network. If these settings are not set up correctly, incoming calls may not be able to reach your device.

Note: Resetting your network settings will erase any saved Wi-Fi networks and Bluetooth pairings, requiring you to re-enter them after the reset is complete.

To reset your network settings on most Android devices:

Step 1: Open the Settings app on your smartphone, then tap System or General Management.
Step 2: Go to Reset > Reset Network Settings and confirm the action.

Turn Off Bluetooth

When Bluetooth is on, it can interfere with your device’s ability to receive calls, causing them to go straight to voicemail without ringing. To turn off Bluetooth on an Android device, you can do one of the following:

Swipe down from the top of the screen to open the Quick Settingspanel, then tap the Bluetooth icon to turn it off.

Go to Settings> Connections > Bluetooth and toggle the switch off.

It should help ensure that calls come through to your phone instead of going to voicemail.

Check Airplane Mode

If turning off Bluetooth didn’t solve the issue, another possible cause could be that your phone is in Airplane Mode. Airplane Mode turns off all wireless connections on your phone, including cellular service, which can cause calls to dial straight to voicemail. There are two ways to turn off Airplane mode on Android:

Using the Settings app:

Step 1: Open the Settings app.
Step 2: Tap Network & internet.
Step 3: Toggle off Airplane mode or Flight mode.

Using the Quick Settings panel:

Step 1: Swipe down from the top of the phone screen to access the Quick Settings panel.
Step 2: Look for the Airplane mode or Flight mode icon, then tap it to turn it off.

Check Blocked Numbers

“My boyfriend’s phone goes straight to voicemail when someone is calling. Any idea why that might be?”

Do you also find yourself asking what does it mean? It could be that he has blocked that phone number. To check this:

Step 1: Open the Phone dialer app.
Step 2: Tap the menu icon in the top right corner and select Settings.
Step 3: Tap Block numbers. If you find the number in the blocked list, remove it to ensure that their calls come through to the phone.

If you still have trouble reaching your boyfriend, try calling him from a different number. If your call didn’t go through, you know that he hasn’t blocked your number and that there may be another issue with his phone.

Turn Off Google One VPN

If you’re using Google One VPN, try turning it off to see if that fixes the problem. Some users have reported that Google One VPN can cause incoming calls to a phone to go straight to voicemail. To turn off Google One VPN:

Step 1: Open the Google One app on your Vivo Y36.
Step 2: At the bottom, go to the Benefits tab, then tap View Details below the Online protection with a VPN section.

Step 3: Toggle off Enable VPN.

Contact Your Carrier

If your phone calls go straight to voicemail after trying all the above, contact your carrier for help. They may be able to troubleshoot the problem or determine if there is a service outage in your area.

And if your carrier confirms that there is no service outage or billing-related block, the problem may be with your phone itself. You may need to try resetting your phone to factory settings or taking it to a repair shop.

The Caller Used Ringless Voicemail

Ringless voicemail is a service that allows businesses to bypass your phone’s ringtone and send you pre-recorded messages directly to voicemail. Ringless voicemail is often used for marketing purposes. If you think you’re receiving ringless voicemail calls, you can contact the company calling you and ask them to remove you from their list.

Part 2: Not Clear About the Root Cause? Troubleshoot Directly by Wondershare Dr.Fone

If you’re unsure what’s causing your calls to go straight to voicemail, you can try using the Dr.Fone System Repair tool. This software can scan and repair your phone for any underlying problems, which may fix the issue and get your calls ringing again.

Dr.Fone supports over 1000 Android models, including unlocked Vivo Y36 models and models from carriers like AT&T and Vodafone. It has an intuitive interface and is easy to use, even for beginners. Learn below the steps on how to use Dr.Fone System Repair to fix incoming calls that dial straight to voicemail:

Step 1: Download Dr.Fone on your computer, then launch it once installed.

safe & secure

4,118,635 people have downloaded it

Step 2: Connect your smartphone to your desktop or computer using a USB cable. Next, from the Toolbox homepage, select System Repair.

Step 3: Select Android as the Vivo Y36 device type.

Step 4: Click Start to begin repairing your smartphone.

Step 5: Select the Vivo Y36 device details on the Name, Model, Country, and Carrier drop-down lists. Next, select the agreement checkbox, then click Next to proceed.

Step 6: Follow the in-app instructions to enter Download mode on your Vivo Y36, then click Next.

Step 7: Wait while the app downloads the firmware; once done, click Fix Now.

Step 8: Enter the code in the input box to verify the Vivo Y36 device information in the dialogue box, then click Confirm.

Step 9: The app will start repairing the system issue on your Vivo Y36. Once completed, your app should restart, then click Done to close the app.

You May Also Like:

Top 5 Best Android System Repair Apps

How to Fix It: Android Stuck on Boot Screen?

How to Flash Dead Android Phone Safely

Conclusion

When your phone calls go straight to voicemail without ringing, it can be a frustrating and disruptive experience. Not only do you miss important calls from work, friends, or family, but it also leaves you feeling disconnected and out of the loop. As a temporary measure to avoid missing important calls, check your voicemail regularly.

For a prompt solution, consider using Dr.Fone if incoming calls on your phone go straight to voicemail. It is a powerful mobile solution that can also address other system problems, including stuck boot loops, app crashes, black screens, and bricked devices. If you consistently experience this issue, it’s advisable to reach out to a professional for assistance.

safe & secure

4,215,287 people have downloaded it

8 Solutions to Solve YouTube App Crashing on Vivo Y36

YouTube can be considered among the apps that are widely used by users. And seeing “Unfortunately YouTube has stopped” error on the Android display screen is a thing that you can’t stand. The reasons can be multiple for why YouTube is not working or it keeps crashing. For instance, an outdated app, not updated OS, low storage, or corrupted cache. No matter what has triggered the problem on your device, we have solutions for it. Please read and follow this article to get the problem sorted.

Restart the app

The issues like YouTube keeps crashing are often get disappeared by just quitting and restarting the app. This is helpful to give a fresh start to the app and restarting will bring your device back to normal. Hence, the first resolution we would like to recommend is to restart your app. Follow the steps to do this.

Go to “Settings” and tap “Apps & Notifications” or “Application”.
Choose “YouTube” from the list of apps and open it.
Tap on “Force Close” or “Force Stop”.

You can now restart your device and then launch the app again. Check if this works or not.

Restart the Android

Similar to the app, if you restart the Vivo Y36 device, it will start operating properly making the YouTube app work better than before. So, as the next tip, please restart your device.

Long press the “Power” key.
Press “Restart” and confirm.

Use a VPN

There is a possibility that YouTube is prohibited in your region. Banning some apps is done for some safety reasons. And therefore, you need to check if this is done in your area or not. If yes, then we shouldn’t mention the reason why YouTube is not working on Android. In such a case, use a VPN to access YouTube.

Clear the Cache of YouTube

When the stored cache files start getting crash, the “Unfortunately YouTube has stopped” sort of errors are likely to appear. And therefore, if the above method didn’t work, try this one to get the problem resolved. We are going to clear the cache of YouTube to make it run smoothly.

Go to “Settings” and tap “Apps & Notifications”/”Applications”.
Now, choose “YouTube” from the list of apps.
Open “Storage” and click on “Clear Cache”.

Reinstall YouTube from Play Store

If YouTube keeps crashing, make sure to uninstall and reinstall it from Play Store. Doing this will make the app gets refreshed, remove the glitches, and make it normal as a result. Here are the steps for it.

Firstly, uninstall it by “Settings” > “Apps” > “YouTube” > “Uninstall”.
Now, go to the “Play Store” and search “YouTube”. Tap on “Install”.

Reset Network Settings

The apps that run on the internet might start crashing due to connectivity issues. Therefore, resetting the network settings once can work as a great remedy to follow when YouTube has stopped on your Vivo Y36. This will remove all your network settings like Wi-Fi passwords etc.

Tap on “Settings” followed by “Backup and reset”.
Look for “Reset Network Settings”.

Note: In some phones, you may find the option in “System” > “Advanced” > “Reset”.

Re-flash the stock ROM of Android in one click

There are times when a corrupted system gives you such errors. And therefore, you should try re-flashing the stock ROM on your Vivo Y36. Before you wonder how we would like to introduce a highly recommended tool for this. It is Dr.Fone - System Repair (Android). It holds the proficiency to flash the stock ROM in just a click. So, when your YouTube is not responding due to a corrupted system, make use of this tool to get it solved. The benefits associated with this tool are as follows.

Dr.Fone - System Repair (Android)

Android repair tool to flash the stock ROM of Android

Easy to use and quickly fixes the issues
Has the capability to repair any Android system issue
1000+ Android models are supported
Takes no special technical knowledge to use
Higher success rate with promising results

3981454 people have downloaded it

Step 1: Launch the Tool

Start with visiting the website on your PC and downloading the Dr.Fone toolkit. Install and open the tool. Now, from the main screen, choose “System Repair”.

Step 2: Connect Device

With the help of the USB cord, connect your Vivo Y36 to the computer. Click on “Android Repair” now from the left panel.

Step 3: Enter Information

Now, as the next step, you need to make sure of the details of your device. Please enter the name and brand of the phone. The country, region, and career are also to be added. Hit on “Next” once done.

Step 4: Download Firmware

Now, follow the instructions given on the screen according to your device. Click on “Next” and the program will start downloading the firmware.

Step 5: Repair the Issue

Lastly, when the firmware is downloaded, the system will start getting repaired on its own. You need to wait until you are informed about the completion of the process.

Reset Factory Settings of this Device

When nothing works, the last resort you can go with is resetting the Vivo Y36 device to factory state. Doing this will remove any sort of conflicting bugs and other stuff. However, this will remove the data from your device. So make sure to backup everything before going with this method. The steps are:

Open “Settings” and tap “Backup & reset”.
Go to “Factory data reset” and tap “Reset phone”

Fix Guide

How To Unbrick a Dead Vivo Y36 | Dr.fone