Nubia Red Magic 8S Pro Not Connecting to Wi-Fi? 12 Quick Ways to Fix

Nowadays, it’s pretty much essential to have your Nubia Red Magic 8S Pro or smartphone connected to the internet. Whether you’re watching videos, looking something up, or using any kind of app, you need the internet for these applications to function correctly.

This is why it can so annoying when it gets to a point where the internet connection isn’t working. However, the problem of a web page not loading correctly is just the tip of the iceberg.

There are plenty of problems you could experience, whether it’s the Wi-Fi network keeps disconnecting on its own without any warning, perhaps a security issue where the passcode or IP address isn’t being registered properly, or even if the connection is just being super slow, even if there’s no reason too.

Luckily, despite there being so many problems out there, there are also many solutions. Today, we’re going to share with you the complete definitive guide to help you get your Nubia Red Magic 8S Pro connected and free from problems and issues.

Part 1: Restart your Nubia Red Magic 8S Pro

Begin by powering off your Nubia Red Magic 8S Pro and unplugging your router. Wait for about a minute before plugging in the router and turning on your device. This simple reset can often restore stable connections and fix Android wifi not working.

Part 2: Turn on Airplane mode and turn off

Turn on Airplane Mode for a few seconds, then turn it off. This maneuver refreshes your device’s network connections and might rectify the Android not connecting to wifi issue.

Part 3. Check Wi-Fi Router settings

The third step you’ll want to take is making sure the internet router in your house is working properly and is actually sending internet data to your Nubia Red Magic 8S Pro. Of course, if you have other internet-enabled devices connected to the same router and they’re working fine, you know this isn’t the problem.

However, if you’ve got a problem with Wi-Fi not working on your Android and other devices in your home or office, you know you’ve got a router problem. Here’s how to solve it.

Go to your internet router and check the indicator lights
While this depends on your device, a green or blue light will mean the connection is good, whereas a red light indicates a problem
Press the Restart button on your router and wait ten minutes before reconnecting your device and connecting again
Call up your internet provider to see if there’s an internet connection issue in your area
Open your web browser and log into your router settings to ensure your Nubia Red Magic 8S Pro is connected to the Wi-Fi network and is allowed to send and receive data

Part 4. Boot your Android in safe mode

If you’re unable to connect to the internet, but other devices have no issues, you may find the issues is coming from within your Nubia Red Magic 8S Pro itself. Fortunately, there are ways you can see whether this is the problem.

The best way to do this is to boot your device in Safe Mode. The process for doing this will depend on the make and model of your Nubia Red Magic 8S Pro, but the basic process goes as follows;

Turn off your Nubia Red Magic 8S Pro by holding down the Power button and tapping Power Off. Wait a few minutes to ensure the Nubia Red Magic 8S Pro device is completely off
Press and hold the Power button to turn your phone on, but the press and hold both the volume up and volume down buttons at the same time
You will see the words ‘Safe Mode’ appear on your screen as the Nubia Red Magic 8S Pro device loads
Now you will be booted in Safe Mode. Try connecting to the internet again to see if it works

If your device connects to the internet while in Safe Mode, you’ll know you have a problem with an app or service that’s running on your device. If this is the case, you’ll need to go through your apps and delete them and then reinstall them one at a time until you find the app or service that is causing your internet problems.

Part 5. Check the Android Wi-Fi adapter

If you’re using a Wi-Fi adapter on your device to connect to the internet, you’ll need to make sure this is working. This could be an adapter on your Nubia Red Magic 8S Pro itself, especially if you’re using an older device, or if you’re using an adapter to boost the ranger of your router network.

You need to check both of these to make sure your connection is working properly.

If using an Android Wi-Fi adapter, make sure all the Nubia Red Magic 8S Pro device drivers are up to date, and if you’re using an app, make sure the app is updated, and all the settings allow an internet connection
If you’re using a router adapter, make sure it’s set up properly, and your Nubia Red Magic 8S Pro is connected to the adapter using the correct passwords. Try connecting another device to see if the internet connection is working on there
Whichever method you’re using, try disconnecting your Nubia Red Magic 8S Pro and forgetting the network, and then reconnecting and entering the right password to refresh the connection

Part 6. Check SSID and IP address on Android

To make a Wi-Fi connection work, your Nubia Red Magic 8S Pro needs to match two codes that connect and relate to your router to establish the connection and work correctly. These are known as the SSID and the IP address.

Every wireless device will have its own codes and making sure they’re matched to the network you’re connecting to is crucial to ensuring the internet is working on your Nubia Red Magic 8S Pro. Here’s how to check on your Nubia Red Magic 8S Pro to make sure everything is correct.

Tap the Settings menu option, followed by Wi-Fi on your Nubia Red Magic 8S Pro
Turn on your Wi-Fi network and connect it to your router
Find the router name (SSID) and make sure it’s exactly the same as the SSID written on your router
Once connected, tap the Wi-Fi network and you will see the IP address. Check both your phone and the router codes to make sure this number matches

When these numbers are matching, if your Android is still not connecting to wifi, you’ll know this wasn’t the problem.

Part 7. Fix Android system issues in one click

If none of the solutions above are working, this could indicate a real problem with the firmware and operating system of your Nubia Red Magic 8S Pro. Fortunately, a fast solution to get everything working again is to completely repair the software of your phone.

You can do this easily using powerful Android recovery software known as Dr.Fone - System Repair (Android) . This is the leading repair tool on the market and is designed to fix and repair any firmware and software problems you may be having.

Dr.Fone - System Repair (Android)

A one-click tool to fix Wi-Fi not working on Android

Can repair Android from any problem including the black screen of death
A trusted software application used by 50+ million people around the world
The most user-friendly mobile repair application available right now
Supports over 1,000+ Android models and devices
A world-class customer support team to help you whenever you need them

3,483,527 people have downloaded it

To help you have the best and the most accurate experience when using the Dr.Fone - System Repair (Android) application, here’s a complete step-by-step guide on how to use it.

Step One Make your way over to the Wondershare website and download the Dr.Fone - System Repair (Android) software. Install it onto your computer by following the on-screen instructions.

Once installed, connect your Nubia Red Magic 8S Pro to your computer using a USB cable, and open the software, click “System Repair”.

Step Two Click the “Android” option in the menu and then click “Start” to begin the Repair process.

Step Three On the next screen, go through the options and use the drop-down menus to make sure the information is correct for your individual device. Accept the terms and conditions of the software, and then click the “Next” button.

Step Four Confirm you want the software to carry out the repair process by typing the ‘000000’ code into the pop-up box and pressing Confirm. Make sure you read everything displayed in this box beforehand to know what’s happening.

Step Five Now put your phone into Download Mode by following the on-screen instructions, so your device is ready for the repair process. The method for getting your phone into Download Mode will vary depending on your device, so make sure you’re following the right instructions.

Step Six Once the software has detected your device in Download Mode, it will automatically begin the repair process. You need to make sure your device stays connected throughout this time, and your computer stays on.

The whole process is automatic, so you won’t need to do anything until it’s finished. Once completed, you can disconnect your phone and start connecting it to the internet as normal!

safe & secure

Part 8. Check the Wi-Fi connectivity on another phone

When experiencing problems with your Wi-Fi network, it’s worth noting the problem might not be with your phone, but rather the Wi-Fi network itself. This is why it’s important to make sure you check the connection on another device.

Of course, if you’re already using another phone on your Wi-Fi network, you know this isn’t the case. However, if you’re not sure, here’s what you need to do;

Get another Android or iOS phone or tablet
Open the Settings menu and connect to the Wi-Fi network you’re having problems with
Enter the password and connect to the network
Open a web browser on the phone and try loading a web page
If the page loads, you know the Wi-Fi network isn’t the problem
If the page doesn’t load, you know you’ve got a problem with your Wi-Fi network

Part 9. Change the password of the Wi-Fi

Each Wi-Fi network router will give the opportunity to choose and change the password you have to let devices connect to your network. It’s important you try changing this because you never know if someone else has accessed your network and could be blocking your device. Here’s how it works;

Log onto your computer and open your Wi-Fi settings
Depending on the brand and method of your individual router, navigate to the Wi-Fi password settings menu
Change the password to something complicated using all available digits and characters
Save the password and restart the router to disconnect all devices
Now connect your Nubia Red Magic 8S Pro to the router using the new password

Part 10. Reset network settings on Android

Just like the method above where you’ll be effectively resetting the network settings on your router, if this hasn’t worked, you’ll be able to reset the network settings on your Nubia Red Magic 8S Pro, hopefully removing the bugs and allowing you to connect.

Here’s how you can do this easily on your Nubia Red Magic 8S Pro;

From the home screen of your Nubia Red Magic 8S Pro, open the Settings menu
Tap the Backup & Reset option
Tap the Reset Network Settings option
Tap the Reset Network option
If you need to, enter the PIN number or passcode for the Android device, and the Nubia Red Magic 8S Pro device will confirm the reset has taken place
Reconnect your Nubia Red Magic 8S Pro to your Wi-Fi network for the changes to take effect

Part 11. Clear partition cache in recovery mode

As you continue to use your Nubia Red Magic 8S Pro, the partition cache will fill up with data your device needs and doesn’t need. However, by clearing your device’s partition cache, you can make clear up some space which should help your device have enough memory to connect to the internet.

Turn off your Nubia Red Magic 8S Pro
Turn it on by holding down the power button, volume button, and home button
When your phone vibrates, let go of the Power button, but continue to hold the volume button
When a menu is displayed, use the volume buttons to navigate the menu
Select the Android System Recovery option, followed by Wipe Cache Partition
Restart your device and connect to the internet

Part 12. Reset factory settings

If worse comes to worst, another option you have is to factory reset your Nubia Red Magic 8S Pro. As we’ve spoken about above, while using your phone from the day you started using it, your device will fill up with files and data which can become messy and causes bugs.

However, by factory resetting your device, you can start again from the factory default from which you first received it, ultimately clearing the bugs. Make sure you back up your device before proceeding because it will erase your personal files.

Open the Settings menu on your Nubia Red Magic 8S Pro
Navigate to System > Advanced > Reset Options
Tap the Reset phone option, and enter your PIN code if required
Tap Erase Everything
Wait for your phone to complete the process
Restart your device and connect to the internet

safe & secure

Fix Unfortunately Settings Has Stopped on Nubia Red Magic 8S Pro Quickly

All of you, sooner or later, must have found the “Unfortunately Settings has stopped” error on your Nubia Red Magic 8S Pro. The problem can occur if the Settings keeps stopping or crashing. Many times, you may try to open the Settings but it doesn’t even open. Or possibly, it may freeze after getting opened thereby hampering the Nubia Red Magic 8S Pro device’s performance.

Well! There can be a number of reasons why this thing happens. For instance, custom ROM installations, not enough space in the Nubia Red Magic 8S Pro device or perhaps an outdated version of Android. If you are struggling with the same issue and want to know what to do when Android Settings is not responding, this post will help you. We have explained everything in detail along with the solutions. So, scroll down and get things sorted.

Part 1: Clear the cache of Settings and Google Play Service

It is possible that the corrupted cache files are responsible for this error. Hence, as the first tip, we would like you to clear the Settings cache if that is what triggers the “Unfortunately Settings has stopped” issue. Clearing it would definitely make Settings run appropriately. And The steps to clear the cache of the Google Play Services app are similar. Here is how to clear the cache of Settings:

Open “Settings” on your Nubia Red Magic 8S Pro and choose “Apps & Notifications”/”Apps”/”Application Manager” (the option may differ on different devices).
In the list of applications, look for “Settings” and open it.
Now, select “Storage” followed by “Clear Cache”.

Note: In some phones, the “Clear Cache” option may come after tapping on “Force Stop”. Therefore, go accordingly without getting confused.

Part 2: Clear the Android phone’s RAM and retry

As the next tip, we would like to suggest you clear your device’s RAM by ceasing the running apps in the background. RAM, if at the increased level, is responsible for the Nubia Red Magic 8S Pro device’s freezing, poor performance, and most probably is the reason behind crashing Settings. Also, if the apps in the background keep running, they might conflict with the Settings and stop it to perform properly. Therefore clearing RAM is important when Android Settings is not responding. Here is how to do it.

Firstly, you need to go to the Recent apps screen. For this, long-press the Home key.
Note: Please note that different devices have different ways to go to the Recent apps screen. Do it according to the Nubia Red Magic 8S Pro device you own.
Now, swipe the apps and tap on the clear option. You will be able to notice the amount of RAM cleared

Part 3: Uninstall the Google update

Uninstalling Google Play Store updates has also responded well to many users. It has worked in the case of the “Unfortunately Settings has stopped” error. So, we would also like to suggest you use this tip if the others don’t work. Here are the steps to be followed for this.

Open “Settings” on your Android and tap on “Application manager” or “Apps” or “Application.
Now, head to all the apps and select “Google Play Store” from there.
Tap on “Uninstall Updates” and restart your device to check if the crashing Settings issue has been resolved.

Part 4: Uninstall the custom ROM or re-flash the stock ROM

Using a custom ROM on your device brings up this problem due to incompatibility or improper installation. Therefore, you should either uninstall the custom ROM or re-flash the stock ROM. in order to re-flash the stock ROM of your Nubia Red Magic 8S Pro, the best way would be Dr.Fone - System Repair (Android). It offers one-click functionality to flash stock ROM and that too with full security. Supporting all Nubia Red Magic 8S Pro devices, it ranks among its counterparts when it comes to fixing crashing Phone app issues or any other Android system issue. It is loaded with the beneficial features which are discussed below.

Dr.Fone - System Repair (Android)

Android repair tool to fix “Unfortunately, Settings Has Stopped”

You needn’t be a tech-savvy to use this
Supports a wide range of Android devices easily, 1000+ being more precise
One-click tool and supports any sort of Android system issue
Higher success rate along with millions of trusted users
Trustworthy and offers an extremely easy interface

4,635,310 people have downloaded it

How to fix crashing Settings using Dr.Fone - System Repair (Android)

Step 1: Download Tool

Visit the official website of Dr.Fone and download the toolbox from there. Go for the installation process and wait until the installation gets over. Launch it now and choose the “System Repair” tab from the main window.

Step 2: Get the Phone Connected

With the help of a USB cable, plug your Nubia Red Magic 8S Pro into the PC. Upon proper connection, hit on the “Android Repair” option from the left panel.

Step 3: Feed Correct Information

In the next window, you need to fill in some necessary information like the name and model of the mobile device. Enter details like country and career. Check once and hit on “Next”.

Step 4: Enter Download Mode

Now, you need to take your device into Download mode. For this, you need to follow the onscreen instruction according to your device. Click “Next” and you will notice the firmware downloading progress on your screen.

Step 5: Repair the Issue

Once the firmware is completely downloaded, your Nubia Red Magic 8S Pro will automatically start getting repaired. Stay there and you will receive a notification that the repair is done.

Part 5: Wipe cache partition to restore Settings

Like RAM, wiping cache is also vital so as to make the Nubia Red Magic 8S Pro device’s operation smoother. And when you are getting the “Unfortunately Settings has stopped” error, it might be due to the collected cache. To remove it, you will need to enter the recovery mode. And the steps for recovery mode range from device to device. For instance, Nubia Red Magic 8S Pro users have to press the “Home”, “Power” and “Volume Up” buttons. Similarly, HTC and LG device users are supposed to press the “Volume Down” and “Power” buttons. For Nexus, it is “Volume Up, Down” and Power key combinations. Therefore, before going further, make sure what device you own and enter the recovery mode according to it. Now, follow the detailed guide below to wipe the cache partition in order to fix crashing Settings.

Primarily, turn off the Nubia Red Magic 8S Pro device and enter the recovery mode by pressing the respective key combinations.
You will notice a Recovery screen on your device.
On showing up the recovery screen, look for the “Wipe Cache partition” option and use the “Volume Down” and “Volume Up” buttons to scroll down and up respectively.
On reaching the required option, press the “Power” button to start wiping.
Once finished, click the reboot option and the Nubia Red Magic 8S Pro device will be rebooted, fixing the issue hopefully.

Part 6: Factory reset your Android

You can also opt for Factory resetting your device to fix the issue of Settings keeps stopping. By removing everything from the Nubia Red Magic 8S Pro device, it will make your device run properly. If you have important data on your device, please make sure to create a backup before taking action if you don’t want to lose it. The steps are as follows.

In the “Settings, go to “Backup and Reset”.
Tap on “Factory data reset” followed by “Reset device”.
Wait for the completion of the process and check if Settings is stopping or not after it gets rebooted.

Click here

![Android settings not responding - factory reset android](https://images.wondershare.com/drfone/article/2019/04/factory-reset.jpg)

Part 7: Check and update Android OS

A lot of times minor issues crop up due to the operating systems that get outdated. It is because the Nubia Red Magic 8S Pro device needs to get updated from time-to-time for proper functioning otherwise it will not be able to match up with the fading technologies thereby coming up with issues like “Unfortunately Settings has stopped”. We recommend here you check for the available update and update your device. For this follow the guide below.

Go to “Settings” and tap “About Phone” on your device.
Now, hit on “System Update” and the Nubia Red Magic 8S Pro device will look for any available update.
If there is any, go along with the prompts to install it and make your phone even smarter.

Conclusion

If your Nubia Red Magic 8S Pro shows the “Unfortunately Settings has stopped” error, don’t worry. This problem can come from many things like old software or cache issues. You can try easy fixes like clearing cache or updating your system. Sometimes, removing custom ROMs might be needed.

For iOS users facing similar problems, we recommend using Dr.Fone-System Repair (iOS) . It’s known for fixing many iOS problems without losing any data. Remember, a well-working device is just a few steps away!

safe & secure

How To Fix Part of the Touch Screen Not Working on Nubia Red Magic 8S Pro

You probably touch the screen of your phone hundreds of times per day. It’s no surprise that smartphone touchscreens are one of the most common components to fail, given their delicate glass construction. However, a part of the touch screen not working on your Nubia Red Magic 8S Pro does not necessarily mean it is a hardware issue. There could be other reasons why your Android’s touch screen stopped responding.

If your phone’s touchscreen frequently fails to respond, there are several things you can try before calling a professional. This article will reveal those proven fixes you can easily perform independently.

Part 1. Why Is Part of My Screen Not Working

There are two possible causes as to why your phone’s touch screen is not working. One is the touch screen may have been damaged, and the other is the Nubia Red Magic 8S Pro device may be experiencing technical difficulties.

If you drop your phone and it becomes stuck against something, the touch screen’s connectivity may fail. Only a part of the touch screen may sometimes become damaged and unresponsive. That may also occur when there is a technical failure, such as the phone hanging. A part of the touch screen not working can occur when malware is downloaded or when phone settings are changed.

Now, the problem can affect any Android phone, and users may encounter the following error messages on their respective phone models:

Nubia Red Magic 8S Pro P40 lite half touch screen not working
Nexus touch screen not working
LG screen is unresponsive to touch
Nubia Red Magic 8S Pro left side of the screen is not working
Redmi’s whole screen is unresponsive to touch

Part 2. Different Types of Touch Screen Issues and What You Should Check Before Fixing

You may experience a variety of touch screens not working on Android issues:

A certain part of the touch screen is not working.
Your touches do not register on the touch screen.
The touch screen incorrectly responds to your touch.
Half touch screen is not working.
The touch screen becomes frozen or hangs.
The screen flashes, flickers, or remains blank.
Theleft side of the phone screen is not working.

Before proceeding to how to fix an unresponsive touch screen on an Android device, you should complete the following steps:

Examine the screen of your device. Check to see if it is cracked or chipped.
If the screen is damaged, it must be replaced.
Remove the Nubia Red Magic 8S Pro device cover and screen protector if they are not damaged.
If there is a sticker on the Nubia Red Magic 8S Pro device screen, you must remove it.
Before continuing, make sure your screen is spotless.

Part 3. How To Fix Part of the Touch Screen Not Working (No Physical Damage)

If you have already tried running the Nubia Red Magic 8S Pro device in diagnostic mode and verified that it is not physically damaged, then the problem is most likely technical. If your Nubia Red Magic 8S Pro’s screen is not responding to touches for technical reasons, follow the methods below to resolve the issue.

Restart Your Device

When your touch screen stops working, the first thing you should do is restart your device. The operation is known as soft resetting. You cannot turn your device off from the option on the screen because the touch screen is not responding. Here are the steps to take.

Step 1: Hold the “Power” button until the Nubia Red Magic 8S Pro device turns off.

Tip: If you hold down the power button for a few seconds, you will see the “Power Off” and “Restart” options on the screen. You can’t use it because the entire screen isn’t responding. Hence, you should press and hold the “Power” button for as long as necessary.

Step 2: When the Nubia Red Magic 8S Pro device turns off, wait a few seconds.

Step 3: Press and hold the “Power” button to restart the Nubia Red Magic 8S Pro device.

Check to see if the Android auto touch screen is not working problem has been resolved. Otherwise, proceed with the following methods.

Turn On Safe Mode

You should switch to Safe mode whenever an application or piece of software causes a problem on your device. Only the most fundamental system components are loaded and used when operating in Safe mode.

If your touch screen is functional in safe mode, the issue is most likely internal. You can quickly fix the Android touchscreen issue by following the prompts given below to activate the safe mode:

Step 1: To force a restart, press and hold the Nubia Red Magic 8S Pro device’s “Power” button for an extended period.

Step 2: Maintain pressure on the “Power” button. Take your finger off it once you see the manufacturer’s logo.

Step 3: When you let go of the “Power” button, press and hold the “Volume Down” button. After that, a “Safe Mode” label will appear in your screen’s lower-left corner.

Turn Off Developer Options

Every smartphone is bound to have limitations. However, smartphone makers include a “Developer Options” menu for advanced users. Here, restrictions are removed, and user preferences can be customized.

If you enable Developer Options on some Android devices, they may stop working properly. If you have recently activated Developer Options and your touchscreen is no longer responding as expected, you should disable it. To do so, follow the instructions below:

Step 1: Launch the Settings app on your device.

Step 2: Select the System menu item, which usually locates at the bottom of the screen.

Step 3: Tap the Advanced options menu, then select Developer Options.

Step 4: You will then find the switch to turn it on or off. Disable itby toggling the button off.

Step 5: Restart your device to check if the part of the touch screen not working issue has been resolved.

Reset Device to Factory Settings

Resetting your device to its factory settings will return it to its state when you first unboxed it. All your phone’s data and installed apps will be erased, including any malware on your device that may be causing the issue to occur. Here’s how to restore your device to factory settings:

Step 1: Since your touch screen is not working, you can factory reset it using Google’s Find My Device web service.

Step 2: Go to Find My Device from any device and sign in to the Google account associated with the damaged screen device.

Step 3: After successfully logging in, you will see your device’s name. Select the Erase Device option.

Step 4: Confirm by pressing the Erase Device button.

Tip: Since all your data will be removed, it’s recommended to back up your data first before resetting your device to factory settings.

Part 4. Fix Using a Third-Party App – Wondershare Dr.Fone

If you’ve exhausted all other options and still can’t fix your Android’s part of the touch screen not working issue, it’s time to resort to Dr.Fone – System Repair! It allows you to repair Android system issues with a single click.

Many users have reported exceptions on their Android devices, such as touch screen failure, black screen of death, system UI failure, app crashing, etc. And in this case, people should seek an Android repair tool.

Dr.Fone – System Repair has made it easier than ever for Android users experiencing technical issues with their device, including an unresponsive touch screen, among other system issues. The best part is that no data will be lost while repairing Android system issues.

Follow the steps given below on how to use Wondershare Dr.Fone System Repair for Android:

Step 1: Select the System Repair option from the main window after starting Dr. Fone.

Step 2: Connect your Nubia Red Magic 8S Pro or tablet to the computer using the appropriate cable. Choose Android Repair from the three options shown on the left side of the screen.

Step 3: The device information screen will appear in the next window. There, input your device’s unified brand, name, model, country/region, and carrier information. Then click Next after you confirm the warning.

The Android repair procedure may wipe out all data on your device. To confirm and proceed, enter “000000”.

Note: It is strongly advised that you back up your Android data before attempting Android repair.

Step 4: Before repairing your Nubia Red Magic 8S Pro, you must boot it into Download mode. To boot your Nubia Red Magic 8S Pro or tablet into DFU mode, follow the steps below:

For a device that has a Home button:

Turn off your phone or tablet.
Hold the Volume Down, Home, and Power buttons for 5 to 10 seconds.
To enter Download mode, release all the buttons and press the Volume Up button.

For a device that lacks a Home button:

Turn off the Nubia Red Magic 8S Pro device.
Hold the Volume Down, Bixby, and Power buttons for 5 to 10 seconds.
To enter Download mode, release all the buttons and press the Volume Up button.

Step 5: Then press the Next button. The program will then download the firmware. After downloading and verifying the firmware, the program will automatically repair your Nubia Red Magic 8S Pro. And in a while, your Nubia Red Magic 8S Pro’s system issues will be resolved.

Supported OS

Check Dr.Fone’s supported operating systems below before using the application to fix your mobile technical issues.

Platform	Supported OS
Windows	Windows 11/10/8.1/8/7/Vista/XP
Mac	Mac 14/13/12/11/10.15/10.14/X/10.13/10.12/10.11/10.10/10.9/10.8

Key Features

Dr.Fone – System Repair is a data management and recovery tool that contains several toolkits in one program, each designed to repair a specific phone problem. Check out its key features below:

One-click Android Repair Tool
Troubleshoots and repairs a wide range of Android system problems, including black screen of death, Play Store not working, apps crashing, phone stuck in a boot loop, and bricked Android issues
A high success rate for fixing Android system issues
Fixes Android system back to normal

Pros

Here are the advantages of using Dr.Fone – System Repair:

Highly intuitive UI/UX/. No need for any skill to operate it
Provides a comprehensive set of toolkits, including advanced data recovery and system repair
Data management is simple and seamless for both Android and iOS devices
Data backup with Dr. Fone is simple and quick.

Cons

Check below to know Dr.Fone – System Repair’s limitations:

Depending on the toolkit required, the program can be costly.

safe & secure

Conclusion

Fixing an Android part of the touch screen not working issue can be quickly done with just a few fixes you can do on your own. However, there may be times when the solutions provided above may not work, and the worst part is factory resetting your phone erases all your data.

That’s why Dr.Fone – System Repair might be your best solution. It has all the tools you need to keep your Nubia Red Magic 8S Pro 100%. Not only that, but with Dr.Fone, you can repair your Android system issues without dealing with any data loss.

Fix Guide

Nubia Red Magic 8S Pro Not Connecting to Wi-Fi? 12 Quick Ways to Fix | Dr.fone