Proven Ways to Fix There Was A Problem Parsing the Package on Tecno Pova 5

Unable to install your favorite Apps from Google Play Store because there was a problem parsing the package?

The Parse Error or there was a problem parsing the package error is very common with Android devices. Android is a versatile platform and, therefore, a very popular OS. It is an open software and allows users to download and use various types of apps from the Play store. Android is also a cheaper alternative as compared to other Operating Software.

Since many of us are well versed with most of the Android devices, parse error, or there is a problem parsing the package is an error is not something new and uncommon.

The error message usually pops up on the Tecno Pova 5 device screen when we try to download and install an App, for example, “There is a problem parsing the package Pokémon Go ”.

The error message which appears reads as follows:

“Parse error: There is a problem parsing the package”.

Android users who have experienced this would know that the parse error leaves us with only one option, i.e., “OK” as shown in the image below.

There was a problem parsing the package may occur due to several reasons, most of which are listed and explained below. Furthermore, there is a list of solutions to choose from to eliminate the “there is a problem parsing the package” error.

Read on to find out more.

Part 1: Reasons for the parsing error

Parse Error, better known as “there was a problem parsing the package” error is very common and normally surfaces when we try to download and install new Apps onto our Android devices from Google Play Store.

The reason for the error message to pop-up are many but none of them can be blamed singularly for the “there is a problem parsing the package” error. Given below is a list of the most probable reasons for Parse Error to stop an App from installing. Examine them carefully before moving on to the solutions to fix the “there was a problem parsing the package” error.

• Updating the OS may cause some disturbances in the manifest files of different Apps leading to Parse Error.

• Sometimes, the APK File, i.e., Android Application Package, gets infected due to improper or incomplete App installation causing “there is a problem parking the package” error.

• When Apps are downloaded and installed from unknown sources, due permission is needed. In the absence of such permission, the chances of the Parse Error to occur increase.

• Certain Apps are not compatible or supported by the latest and updated Android versions.

• Anti-virus and other cleaning Apps are also a major reason for the “there was a problem parsing the package” error.

The causes listed above are not App specific. The Parse Error may occur due to any one or more of these reasons, but what is more important is to try to get rid of the problem.

Let us move on to learn ways to fix the there was a problem parsing the package error.

Part 2: 8 Solutions to fix the parsing error

“There is problem parking the package” error can be dealt with easily if only we do not panic and deliberately follows the steps explained in this segment. Here are 7 of the most reliable and trustworthy methods to fix the Parse Error.

They are easy, user-friendly, and do not take much of your time. So don not waste any more of your time and try them now.

2.1 One Click to Fix ‘There is a Problem Parsing the Package

If you’re still encountering the Parsing error, there may be a problem with the Tecno Pova 5 device data on your device, which means you’ll need to repair it. Luckily, there’s a simple, one-click solution you can follow called Dr.Fone - System Repair .

Dr.Fone - System Repair (Android)

Android repair tool to fix all android system issues in one click

• Simple, clean, and user-friendly interface
• No technical knowledge required
• Easy one-click repair to fix ‘there is a problem parsing the package’ error
• Should repair most parsing problems with apps, like ‘there is a problem parsing the package Pokemon Go’ error
• Supports most Tecno Pova 5 devices and all the latest models like Galaxy S9/S8/Note 8

3981454 people have downloaded it

If this sounds like the solution you’re looking for, here’s a step by guide on how to use it yourself;

Note: Please note that this repair process can erase all data on your phone, including your personal information. This is why it’s so important to back up your Tecno Pova 5 before proceeding.

Step #1 Head over to the Dr.Fone website and download the software. Install the downloaded software and open it. From the main menu, select the System Repair option.

Input your device and firmware information to confirm you’re installing the right version of the operating system.

Step #2 Follow the onscreen instructions on how to get into Download Mode to start the Repair process.

Once complete, the firmware will start downloading.

Step #3 Once the firmware has downloaded, it will automatically install it to your device.

When this is completed, you’ll be free to disconnect your Tecno Pova 5 and use it how you please without the ‘there is a problem with the parsing package’ error.

2.2 Allow installation from unknown sources

When we install Apps from other sources and not Google Play Store, there might be a glitch in using such Apps. To overcome this problem, turn on “Allow App installation from other sources”. Follow the steps given below for better understanding:

• Visit “Settings” and select “Applications”.

• Now tick mark on the option saying allow App installation from unknown sources.

2.3 Enable USB debugging

USB debugging is not considered necessary by many users but these methods give you an edge over others while using an Android device as it lets you access things on your phone, etc which you could not earlier.

To enable USB Debugging to fix “There is a problem parsing the package” error, follow these steps:

• Visit “Settings” and select “About Device”.

• Now click on “Build Number” not once but continuously for seven times.

• Once you see a pop-up saying “You are now a developer”, go back to “Settings”.

• In this step, select “Developer Options” and turn on “USB Debugging”.

This should solve the problem. If not, move on to the other techniques.

2.4 Check APK File

An incomplete and irregular App installation may cause the .apk file to get corrupted. Make sure you download the file completely. If need be, delete the existing App or its .apk file and reinstall it from Google Play Store for it to be compatible with your device’s software and to use the App smoothly.

2.5 Check App Manifest File

Manifested App files are nothing but .apk files which are improvised by you. Such changes may cause the Parse Error to occur more frequently. Modifications in the App file can be made by changing its name, App settings, or more advanced customizations. Make sure you roll back all changes and restore the App file to its original state to prevent it from getting corrupted.

2.6 Disable Antivirus and other cleaner Apps

Antivirus software and other cleaning Apps are very helpful in blocking unwanted and harmful Apps from damaging your device. However, sometimes such Apps also prevent you from using other safe Apps.

We do not suggest that you delete the Antivirus App permanently. Temporary uninstallation will be useful here. To do so:

• Visit “Settings” and then select “Apps”.

• Select the antivirus App to click on “Uninstall” and then tap “OK”.

Now download and install the desired App again. Once this is done, do not forget to install the Antivirus App again.

2.7 Clear Cache cookies of Play Store

Clearing Play Store Cache cleans the Android Market platform by deleting all clogged up unwanted data. Follow the steps given below to delete Play Store cache:

• Tap on Google Play Store App.

• Now visit Play Store’s “Settings”.

• Select “General Settings” to “Clear local search history”.

2.8 Factory Reset Android

Factory Resetting your device to fix the Parse Error should be the last thing you try. Make sure you take a back-up of all your data on your Google Account or a Pen Drive because this technique erases all media, contents, data, and other files, including your device settings.

Follow the steps given below to factory reset your device:

• Visit “Settings”.

• Now select “Backup and Reset”.

• In this step, select “Factory data reset” and then “Reset Device” to confirm Factory Reset.

The whole process of factory resetting your Tecno Pova 5 might sound tedious, risky, and cumbersome but it helps to fix the Android SystemUI has stopped error 9 out of 10 times. So, think carefully before using this remedy.

Parse Error: There was a problem parsing the package is an error message that has troubled many Android users. The good part is that the above-stated fixes not only solve the problem but also prevent it from occurring in the future. So, keep them in mind the next time you or anyone you know faces such an issue.

6 Solutions to Fix Error 505 in Google Play Store on Tecno Pova 5

In case you are receiving the error code 505 while downloading an application from Google play store and have no clue what is it, then this is the right article for you. In this article we are covering the reasons behind the occurrence of Google play error 505. Not only that, we are also providing 6 solutions to fix the error code 505. Usually, this error is seen with Android 5.0 Lollipop version and occurs at the time when you try to install the already downloaded application making it hard to run the app.

Such an error is a kind of permission error. That is, in case you have two similar kinds of applications such as banking apps and both looking for similar kind of permission, causes conflict error named as error 505.

The occurrence chance is more in the old operating systems, 4 KitKat, Android version 4. Let us then proceed to know more about this error 505.

Part 1: Reasons for Google Play error 505

As per the report by some users, error 505 occurs in certain apps such as Weather App, SBI, ITV, Adobe Air 15, We Chat etc.

To have the right idea about the problem, we have listed all the reasons of it occurrence below:

• Google play store is not updated or refreshed (Causes the error during the downloading process)
• Due to installation of an outdated version (In case your Android version is outdated may result in error in the installation process)
• Cache memory(Is the redundant data occurs due to search history)
• Application is not compatible with the Android OS (If the app you are downloading is not the updated may cause error)
• Adobe air app
• Data crash (Many time app or Google play store crashed crashes after downloading it, reason may be some bugs, so many apps are open, less memory etc.)

Now that we know the reasons, let us also learn about the solutions that will guide you to resolve the error code 505.

Part 2: 6 Solutions to fix error code 505

Any error that occurs during downloading or installation process not only hinders with the new app but also takes a large amount of our time to solve the issue. To check that, let us go through the 6 solutions one by one.

Solution 1: One click to make error code 505 disappear

The most common cause for error code 505 pop-up is that Android system files that underpin the Google Play module are corrupted. To make error code 505 disappear in this condition, you should have your Android system repaired.

Dr.Fone - System Repair (Android)

One click to repair Android system and make error code 505 disappear

• Fix all Android system issues like error code 505, error code 495, error code 963, etc.
• One click to fix error code 505. No technical skills required.
• Supports all the new Tecno Pova 5 devices like Galaxy S8, S9, etc.
• Easy-to-understand instructions provided on each screen.

4,999,459 people have downloaded it

Now, you just need to follow these Android repair steps to fix error code 505:

Note: Android repair needs to flash the system firmware, which may erase existing Android data. To prevent data loss, back up all the important data from Android to PC .

Step1: Download the Dr.Fone - System Repair (Android) program , install and launch it. The following interface will pop up.

Step2: Select the “Android Repair” among the 3 tabs, connect your Android to PC, and click “Start”.

Step3: Choose the correct device details from each field, confirm them and continue.

Step4: Boot your Android in download mode, then start downloading the firmware of your device.

Step5: After the Tecno Pova 5 device firmware is downloaded, the tool will start repairing your Android.

Step6: When your Android is repaired, the error code 505 will disappear.

Solution 2: Check whether Download Manger is ON or not

Many times download manager is set to disable due to which you are not able to download or install the app. So, it is required to make a check whether the download manager is set on or off. So that your installation process will work properly. The process to enable the download manager is as follows.

>Go to Settings

>Select the Application Manger or App (Option depends upon the Tecno Pova 5 device)

At the top, an option will appear

>Swipe right till you locate Download manager at top of the screen of the Tecno Pova 5 device

>Then Select Enable

Enabling download manager to give permission to the Tecno Pova 5 device to start the download or installation process.

Solution 3: Updating to the latest version of OS of your Tecno Pova 5

Working with an old operating system is ok, but many times old version also creates some problem and is the main reason behind the occurrence of any bug or error. So, updating the older version act like a rescue to get rid of any such issue or bug. The Process of updation is quite simple; you just need to follow the below steps and your device is ready to get updated to the latest version. Steps are:

• >Go to Settings
• >Select about Phone
• >Click on System Update
• >Check for updates
• >Click on Update
• >Need to click on Install (if any update is available)

Solution 4: Clearing the cache memory from Google services Framework and Google play store

While browsing data online or through Google play store some cache memory get stored for the fast access to the pages. Below mentioned simple steps will help you in clearing out the cache memory from Google services framework and Google play store.

Process to clear the Cache memory for Google Services Framework

• >Go to Settings
• >Select Applications
• >Click on Manage Applications
• >Click to select ‘ALL’
• >Click on Google services framework
• >Select ‘Clear data and clear cache’

That will remove the cache memory of your Google services framework

Steps to Cache memory of Google Play Store

• >Go to Settings
• >Applications
• >Manage Applications
• >Click to select ‘ALL’
• >Select Google Play store
• >Clear data and clear cache

It will clear the cache of Google play store

Clearing the cache memory remove the extra temporary memory, thus free up space for the further installation process.

Solution 5: Reinstalling play store Updates

The reason behind the installation error code 505 might be Google play store updates.

Due to continuous updation of new apps and services Google Play store used to be flooded with so many updates or sometimes does not updated properly. That sometimes caused the problem in dealing with app installation. Resolving the issue is important to make your play store ready for future updation and installation.

• >Go to Settings
• >Visit Application Manager or Apps
• >Select Google Play Store
• >Click on Uninstalling Updates
• >A Message will appear ‘Change play store app to factory version’- Accept it
• >Now Open Google play store>It will refresh the updates within 5 to 10 minutes(So you need to keep your internet connection on while Google play store is updating its store for new updates.)

Solution 6: Third party App

In the case, error 505 occur due to the installation of two or more apps with duplicate permission of data, as many times we use to install two similar kind of app that creates the situation where both seeking out for somewhat similar permissions for the installation. The manual finding is a long and tiring process. Then you can take the assistance of ‘Lucky Patcher App’ to find out which app is creating the conflict. This app will assist you in finding out the duplicity if any and then modifying it. Through this app, once you will find out which particular app is causing the conflict, then you can delete that conflicting app from your phone so that problem of error code 505 gets sort out.

Download link: https://www.luckypatchers.com/download/

Note: If still, you are in the state of trouble to solve the issue of error code 505 then Google Play help center is here to look out all troubles related to app store and its service. You can check out the details by visiting the following link:

https://support.google.com/googleplay/?hl=en-IN#topic=3364260

Or call them at their call center number regarding the issue.

Bonus FAQ about Google Play error

Q1: What is a 505 error code?

The HyperText Transfer Protocol (HTTP) error 505: HTTP Version Not Supported response status code means that the HTTP version used in the request is not supported by the server.

Q2: What is a 506 error?

The 506 error code is a frequent error when operating the Google Play Store. You will sometimes see this error code when you are downloading an app. The app may seem to be downloading just fine when suddenly, near the end of the installation, an error occurs, and a message pops up saying, “App could not be downloaded due to an error 506.”

Q3: How to fix the 506?

Solution 1: Restart your device which can help solve most problems.

Solution 2: Remove the SD card safely.

Solution 3: Correct date and time if it is wrong.

Solution 4: Add your Google Account again.

Solution 5: Clear Google Play Store data and cache.

However, sometimes the five simple couldn’t work anymore. A system repair software can be helpful quickly. We really recommend the Dr.Fone - System Repair (Android) , only a few minutes, the error will be fixed.

Conclusion

Not being able to download or install the app is very frustrating and time-consuming also. Therefore, in this article, we went through the reasons behind the occurrence error code 505 as well as resolving the issue by following five effective methods. I hope that you would be able to sort out the error 505 by following above methods thus would be able to install the application without further delay.

8 Solutions to Solve YouTube App Crashing on Tecno Pova 5

YouTube can be considered among the apps that are widely used by users. And seeing “Unfortunately YouTube has stopped” error on the Android display screen is a thing that you can’t stand. The reasons can be multiple for why YouTube is not working or it keeps crashing. For instance, an outdated app, not updated OS, low storage, or corrupted cache. No matter what has triggered the problem on your device, we have solutions for it. Please read and follow this article to get the problem sorted.

Restart the app

The issues like YouTube keeps crashing are often get disappeared by just quitting and restarting the app. This is helpful to give a fresh start to the app and restarting will bring your device back to normal. Hence, the first resolution we would like to recommend is to restart your app. Follow the steps to do this.

• Go to “Settings” and tap “Apps & Notifications” or “Application”.
• Choose “YouTube” from the list of apps and open it.
• Tap on “Force Close” or “Force Stop”.

• You can now restart your device and then launch the app again. Check if this works or not.

Restart the Android

Similar to the app, if you restart the Tecno Pova 5 device, it will start operating properly making the YouTube app work better than before. So, as the next tip, please restart your device.

• Long press the “Power” key.
• Press “Restart” and confirm.

Use a VPN

There is a possibility that YouTube is prohibited in your region. Banning some apps is done for some safety reasons. And therefore, you need to check if this is done in your area or not. If yes, then we shouldn’t mention the reason why YouTube is not working on Android. In such a case, use a VPN to access YouTube.

Clear the Cache of YouTube

When the stored cache files start getting crash, the “Unfortunately YouTube has stopped” sort of errors are likely to appear. And therefore, if the above method didn’t work, try this one to get the problem resolved. We are going to clear the cache of YouTube to make it run smoothly.

• Go to “Settings” and tap “Apps & Notifications”/”Applications”.
• Now, choose “YouTube” from the list of apps.
• Open “Storage” and click on “Clear Cache”.

Reinstall YouTube from Play Store

If YouTube keeps crashing, make sure to uninstall and reinstall it from Play Store. Doing this will make the app gets refreshed, remove the glitches, and make it normal as a result. Here are the steps for it.

• Firstly, uninstall it by “Settings” > “Apps” > “YouTube” > “Uninstall”.
• Now, go to the “Play Store” and search “YouTube”. Tap on “Install”.

Reset Network Settings

The apps that run on the internet might start crashing due to connectivity issues. Therefore, resetting the network settings once can work as a great remedy to follow when YouTube has stopped on your Tecno Pova 5. This will remove all your network settings like Wi-Fi passwords etc.

• Tap on “Settings” followed by “Backup and reset”.
• Look for “Reset Network Settings”.

Note: In some phones, you may find the option in “System” > “Advanced” > “Reset”.

Re-flash the stock ROM of Android in one click

There are times when a corrupted system gives you such errors. And therefore, you should try re-flashing the stock ROM on your Tecno Pova 5. Before you wonder how we would like to introduce a highly recommended tool for this. It is Dr.Fone - System Repair (Android). It holds the proficiency to flash the stock ROM in just a click. So, when your YouTube is not responding due to a corrupted system, make use of this tool to get it solved. The benefits associated with this tool are as follows.

Dr.Fone - System Repair (Android)

Android repair tool to flash the stock ROM of Android

• Easy to use and quickly fixes the issues
• Has the capability to repair any Android system issue
• 1000+ Android models are supported
• Takes no special technical knowledge to use
• Higher success rate with promising results

3981454 people have downloaded it

Step 1: Launch the Tool

Start with visiting the website on your PC and downloading the Dr.Fone toolkit. Install and open the tool. Now, from the main screen, choose “System Repair”.

Step 2: Connect Device

With the help of the USB cord, connect your Tecno Pova 5 to the computer. Click on “Android Repair” now from the left panel.

Step 3: Enter Information

Now, as the next step, you need to make sure of the details of your device. Please enter the name and brand of the phone. The country, region, and career are also to be added. Hit on “Next” once done.

Step 4: Download Firmware

Now, follow the instructions given on the screen according to your device. Click on “Next” and the program will start downloading the firmware.

Step 5: Repair the Issue

Lastly, when the firmware is downloaded, the system will start getting repaired on its own. You need to wait until you are informed about the completion of the process.

Reset Factory Settings of this Device

When nothing works, the last resort you can go with is resetting the Tecno Pova 5 device to factory state. Doing this will remove any sort of conflicting bugs and other stuff. However, this will remove the data from your device. So make sure to backup everything before going with this method. The steps are:

• Open “Settings” and tap “Backup & reset”.
• Go to “Factory data reset” and tap “Reset phone”

Also read: