Reasons for Infinix Smart 8 Pro Stuck on Startup Screen and Ways To Fix Them

There are many reasons why phones get stuck on the boot screen. It could be something as simple as physical damage or more complicated related to software problems. Having your phone stuck on the logo screen, or boot screen is annoying, and it is no surprise that people will find ways to fix this issue when encountered.

This article will share the possible reasons why your phone is stuck on the boot screen. This article will share three possible reasons for this problem and three valuable tips to help fix this issue. If all else fails, there is an application that is recommended and is sure to solve your issue in no time. Keep on reading to find out more!

It is not uncommon for phones to be stuck on the startup screen, but finding out why this happens is tricky. This section identified some of the top reasons your cellphone could have gotten stuck on the startup screen.

Physical Damage to the Phone

If you accidentally dropped your phone or knocked it on a hard surface, you could have damaged the internal hardware of your phone. This could affect your phone’s ability to reboot and result in your phone being stuck on the boot screen.

If you are 100% certain that your phone has gone through physical damage, you should seek professional help to have your phone repaired or checked. It is advised not to fix this problem yourself as your phone’s internal parts are complicated and delicate. Look for an official phone repair store and get your phone fixed for issues like your phone getting stuck on the logo.

Liquid Damage

It is not common for your phone to expose to water. Rain or water splashes are unavoidable; sometimes, your phone gets wet. Little exposure to water on the surfaces of your phone is fine. However, if you fall into a pool with your phone or drop it in a puddle of water, your phone will likely suffer from liquid damage.

Even the tiniest water droplet that seeped into your phone could damage the internal hardware of your device, often leaving you with your phone stuck on the boot screen. The first thing to do when you accidentally submerge your phone in the water is to check if the water has damaged your phone.

For iPhone users, look for the water damage indicator. If you see that it has turned from white to red, it has suffered from water damage. You have two options if your phone has suffered liquid damage. One is dismantling your phone and letting it dry for at least 48 hours. Two is bringing your phone to a repair shop to fix it.

Software Issues

Software issues are probably the most common reason your phone is stuck on the logo screen. Eight times out of ten, software issues are either caused by a failed software update, using an older version of the operating system, or having a jailbroken phone. When the software does not successfully update, the phone will have no operating system, as the old system was erased before the new software was installed.

The older operating system is also not desired as your phone typically will send periodic updates to make sure your phone is up-to-date and free from bugs. Running applications on an older operating system might lead to issues like the phone being stuck on the boot screen or the logo. Hence, updating your phone to the latest software version would be better.

Part 2. 3 Helpful Ways To Fix Phones Stuck on Boot Screen

After understanding the common problems on why your phone is stuck on the startup screen page, here are three easy solutions to try solving yourself at home.

Hard reboot your phone

To quickly fix any of your phone issues, especially when stuck on the startup screen, perform a hard reboot. The term hard reboot means turning your device off and on again. You might think this is a simple option, but this is a tried and tested method that might work on a minor glitch that results in your smartphone getting stuck on the startup screen page.

Here is an example of performing a hard reboot for an Android phone such as Infinix Smart 8 Pro. Preess and hold the Power and Volume Down buttons simultaneously for more than 7 seconds to perform the hard reboot.

Put your phone in recovery mode

If a hard reboot does not work, a natural next step is to try going into recovery mode. The recovery mode is specially designed to solve any software-related issues. It is important to note that entering recovery mode will delete all your corrupted files and replace them with a functional operating system. Hence, back up all your files to ensure you retain all your information.

Here is a step-by-step process for putting your Infinix Smart 8 Pro or Redmi smartphone in recovery mode.

Step 1: Tap and press the Power button to switch off your Infinix Smart 8 Pro/Redmi phone

Step 2:Hold the Volume Up and the Power buttons at the same time, then release the keys when the Main menu of Recovery mode appears on the screen.

Step 3: You can use the volumes buttons to navigate up and down and press the Power key to confirm the selection.

Factory Reset

If you do not want to attempt recovery mode, you can try resolving the issue of your phone being stuck on the startup screen through Factory Reset. Factory Reset, also called Hard Reset, erases all information and data on your device. As a result, it will return to the settings and recover the data it used to have when leaving the factory.

Here is an example of putting your Samsang smartphone into the Factory Reset DFU mode.

Step 1: Open the Settings application on your phone and tap General Management.

Step 2: Go to Reset > Factory data reset.

Step 3: Swipe to and tap Reset.

Note: Before carrying out a factory reset, you need to input the password of your Infinix Smart 8 Pro Account.

Bonus Tip: Best App To Solve Phone Stuck on Boot Screen

If all the solutions above do not work and you do not want to perform a factory reset on your phone, one option is to use an application called Wondershare Dr.Fone. It is one of the most effective phone recovery solutions and can help to bring your phone back to a state like it was brand new. Being stuck on the startup screen page will be a problem of the past.

The following steps will show you how to use Dr.Fone to perform system repair on your phone.

Step 1: To the Dr.Fone application using the link above and click on System Repair.

Step 2: Depending on the Infinix Smart 8 Pro device you are using, choose either Android or iPhone.

Step 3: In the next window, select the issue you are facing and click Start.

Step 4: Choose the corresponding Brand, Name, Model, Country, and Carrier from each drop-down menu and click Next.

Tip: Make sure the information you input is accurate, as it will affect the system repair if the information is inaccurate.

Step 5: Connect your device to your computer and follow the instructions on the screen to enter Download mode. Click on Next to proceed to the next step.

Step 6: Wait for the process to complete, and a new firmware will be updated on your device. Power on your phone and check if the issue still exists.

Frequently Asked Questions

The following are interesting and frequently asked questions about how to solve boot loops.

1. What is a boot loop?

A boot loop describes a process when Your Infinix Smart 8 Pro stays stuck in a circle of rebooting. When your phone is stuck on the startup screen, one of the strategies you will try is to restart your device. However, when your phone gets stuck in a boot loop, it is your device’s way of trying to turn it off and on again to fix the issue.

Since there is an issue with the booting process, it will keep running into the same error repeatedly, calling the boot loop. When trapped in a boot loop, your device will keep turning off and on. Most boot loop issues are software-related, such as a wrong system update.

2. How do you fix a boot loop?

When stuck in a boot loop, there are different troubleshooting methods for other devices. For Android phones, force your phone into its Recovery mode; from there, you can restore a previous backup. This backup could be from when the boot loop did not exist, so recovery to that backup could quickly solve the problem.

For iPhones, it is the same concept as the Android, restore your phone to the previous backup. You can use iTunes to restore a previously stored backup on your computer.

3. How to prevent a boot loop?

A boot loop typically starts when there is a change to your system before a reboot cycle. Most issues are software-related, such as having to do a system upgrade gone wrong or a problem that doesn’t mesh. One way to prevent this is to perform a software or system upgrade constantly. Make your phone juiced to prevent it from turning off mid-way when updating.

safe & secure

3,405,439 people have downloaded it

Conclusion

This article summarizes some of the possible reasons why your phone is stuck on the boot screen. It demonstrated three useful strategies to overcome your phone stuck in the boot with ease. However, if all the above methods do not work, why not try Dr.Fone-System Repair?

Dr.Fone-System Repair repairs the operating system issues and fixes the issue with your phone. Once you power on your phone again, you can rest assured that it will be like new.

Bricked Your Infinix Smart 8 Pro? Here’s A Full Solution

A bricked phone is a device that won’t turn on no matter what you do and everything you try to do to fix it doesn’t work. Most people will tell you that there is really nothing you can do to fix a bricked device. But with the right information, the right buttons to push and useful additional software you can actually try to fix a bricked device.

In this article we are going to look at how you can fix your device if you are sure it is bricked, how to rescue the data on your bricked device and even how you can avoid this situation in the future.

Part 1: Rescue the data on your Bricked Android Phone

Before we can learn how to fix a bricked device, it is important that you are able to save the data that is on the Infinix Smart 8 Pro device. Having the data saved somewhere else will be the added insurance you need in case anything goes wrong during the process. There are very few software solutions in the market to help you get back data from a bricked device. One of these and the most reliable is Wondershare Dr.Fone - Data Recovery (Android) .

Dr.Fone - Data Recovery (Android)

World’s 1st Android smartphone and tablet recovery software.

• Recover data from broken Android in different situations.
• Scan and preview files before starting the retrieval process.
• SD card recovery on any Android devices.
• Recover contacts, messages, photos, call logs, etc.
• It works great with any Android devices.
• 100% safe to use.

4,771,974 people have downloaded it

How to Use Dr.Fone - Data Recovery (Android) to Rescue Data from a Bricked Android

If your device is completely unresponsive, don’t worry Dr.Fone can help you get all the data back. Simply follow these steps to gain access to the Infinix Smart 8 Pro device and recover all your data.

Step 1: Download and install Wondershare Dr.Fone to your PC. Launch the program and then click on Data Recovery. Select the data types you would like to recover and then click on Next.

Step 2. Select the issue type for your phone. Choose from “Touch screen not responsive or cannot access the phone” or “Black/broken screen”.

Step 3: In the next step, you need to select your device model. If you don’t know the model of your device click on “How to check the Infinix Smart 8 Pro device model” to get help.

Step 4: The next screen will provide instructions on how to enter “Download mode.” Connect the Infinix Smart 8 Pro device to your PC once it is in “Download Mode”

Step 5: The program will begin an analysis of your device and then download the recovery package.

Step 6: Then Dr.Fone will display all the recoverable file types. You can click on the files to preview them. Select the ones you need and click on “Recover to Computer” to save them to your computer.

Part 2: How to Fix Your Bricked Android Phone

Android devices are usually very flexible in allowing users to flash ROM but sometimes an incorrect process can result in a bricked device. While there are few solutions to this problem, here are a few things you can do;

When the Infinix Smart 8 Pro device Boots Straight into Recovery

If the Infinix Smart 8 Pro device can boot to the recovery screen, you can find an alternative ROM to install and copy it your device. Installation can then be done in the recovery menu. If the Infinix Smart 8 Pro device is booting to recovery mode there is a chance that it can be fixed.

Step 1: Load up Clockworkmod or any other recovery tool that you have been using.

Step 2: Once you are in, navigate to the “Reboot system now.” If you are using Clockworkmod, this should be your first option. Hopefully everything will work just right if you do this, If it doesn’t you may need to download and re-flash the ROM again.

When the Infinix Smart 8 Pro device won’t stop rebooting

Here’s what to do if the Infinix Smart 8 Pro device wont stop rebooting.

Step 1: Turn off the Infinix Smart 8 Pro device and then reboot in recovery mode.

Step 2: Go to “Advanced” which will bring up a number of options to choose from.

Step 3: One of the options should be “Wipe Dalvik cache” select this option and then follow the instructions. When finished select “Go Back” to return to the main menu.

Step 4: Go to the “Wipe Cache Partition” and select it.

Step 5: Go to “Wipe data/ factory reset.”

Step 6: Finally reboot the Infinix Smart 8 Pro device by selecting “Reboot system now.” This should fix the problem. You may also want to flash the same ROM or try a new one.

If the above methods don’t work, try one of the following options.

You can return to resource where you found the flash tools and search or ask for advice

Sometimes these errors can be caused if the ROM installation was performed via SD card. In this case reformatting the SD card might help.

If all else fails, it is time to returning the Infinix Smart 8 Pro device to the vendor if your warranty is still applicable.

Part 3: Useful Tips to avoid Bricking your Android Phone

If you are planning on installing custom ROM you need to install Custom Recovery. This will enable you restore the Infinix Smart 8 Pro device to its original settings should anything go wrong and hopefully help you avoid bricking your device.

1. Ensure that you are familiar with the Fastboot or ADB commands before doing anything. You should know how to recover your device by flashing a command line and also manually transfer important files to your device.
2. Make a backup of your device. This is obvious but most people fail to adhere to it. At the very least you can get back all your files and settings to transfer to a new phone.
3. Keep a full Nandroid backup on your phone
4. Keep another backup on your PC which you can access should anything go wrong with the Custom ROM installation
5. Know how to hard reset your device. It may come in handy when your device freezes on you.
6. You should also consider enabling USB debugging. This is because many solutions for a Bricked device rely on USB debugging.
7. Ensure the Custom ROM you choose can actually be used on your device model.

While installing Custom ROM can actually be a great way to customize your device, it is also the leading reason for bricked devices. Therefore ensure that you understand what you are doing when you decide to customize your device. Learn as much as you can about the process before attempting everything.

Best Methods for Infinix Smart 8 Pro Won’t Turn On

The Infinix Smart 8 Pro 3 boasts numerous impressive features, making it a desirable phone. However, occasional malfunctions can result in the Infinix Smart 8 Pro 3 won’t turn on issue. This issue can be incredibly frustrating. Don’t panic if you encounter this issue! There exist solutions to rectify it. This comprehensive guide aims to assist you in diagnosing and resolving the problem.

It will offer both basic steps and advanced techniques. With clear instructions and insightful tips, we’ll help troubleshoot your Infinix Smart 8 Pro 3. Should you encounter this setback, follow this guide diligently to revive your Infinix Smart 8 Pro 3 and have it up and running again.

Scenario 1. Phone Not Charged

A Infinix Smart 8 Pro 4 not turning on might simply be a victim of a drained battery due to lack of charging. Several factors could lead to this, including a damaged charging cable or adapter. Moreover, issues with the power source or a malfunctioning charging port can be the issue.

Reason 1. Damaged Charging Cable or Adapter

Solution: Replace the charging cable or adapter with a known working one. Try using a different USB-C cable and adapter to ensure it’s not a faulty connection.

Reason 2. Faulty Power Source

Solution: Verify the power source by trying different outlets or USB ports. Ensure the power source is functional by testing it with another device.

Reason 3. Charging Port Issues

Solution: Check the charging port thoroughly to identify any dirt, debris, or signs of damage. Gently clean the port using compressed air or a small brush. If there’s visible damage, consider professional repair services.

Scenario 2. Check for Damages

Sometimes, a Infinix Smart 8 Pro 3 might not turn on due to physical damage incurred by the Infinix Smart 8 Pro device. Instances such as accidental drops, exposure to water or moisture, or even hardware malfunctions can be the reason. These can cause visible or invisible damage, leading to Infinix Smart 8 Pro 4 won’t turn on.

Click here

Reason 1. Physical Impact or Dropping

Solution: If the Infinix Smart 8 Pro 3 has experienced a significant impact or drop, inspect the exterior for any visible damage. A cracked screen or internal hardware issue might prevent the Infinix Smart 8 Pro device from turning on. Consider professional repair services if necessary.

Reason 2. Water or Moisture Exposure

Solution: If the Infinix Smart 8 Pro 3 has been exposed to water or moisture, immediately turn it off. Moreover, do not attempt to power it on. Place the Infinix Smart 8 Pro device in a bowl of uncooked rice or silica gel packets to help absorb moisture. Alternatively, use a vacuum or hairdryer in a cool setting to draw out moisture. It’s crucial to let the Infinix Smart 8 Pro device dry completely before attempting to power it on.

Reason 3. Hardware Malfunction

Solution: Check for any hardware malfunction symptoms such as overheating , unusual sounds, or a burnt smell. If any such signs are evident, refrain from attempting to turn on the Infinix Smart 8 Pro device. You should seek professional assistance from authorized service centers.

Scenario 3. Buggy Android Smartphone

An Android smartphone, including the Infinix Smart 8 Pro 3 XL, can encounter situations where the OS becomes extremely buggy. It leads to various issues, such as the Infinix Smart 8 Pro 3 XL won’t turn on or getting stuck in a boot loop . Software glitches, corrupted system files, or incompatible apps can contribute to such problems.

Reason 1. Device Stuck in the Boot Loop

Solution: Try initiating a force restart to help fix this issue. You can do that by pressing and holding the “Power” and “Volume Up” keys at the same time for 10 seconds.

Reason 2. Software Glitches or System Crash

Solution: If encountering issues with the Infinix Smart 8 Pro device not powering on because of software glitches or a system crash, try initiating Safe Mode by simultaneously pressing and holding the ‘Power’ button along with a Volume key. This action will cause the Power menu to be displayed. Here, tap and hold the “Power off” for a while and tap “OK” once the Safe Mode prompt appears.

Scenario 4. System Glitches? Try Wondershare Dr.Fone as a Prioritized Solution

If you have attempted the solutions mentioned above without success, it is essential to explore a more robust option. This is important if the issue seems to be a major software problem that cannot be resolved using basic troubleshooting methods. In such cases, Wondershare Dr.Fone – System Repair emerges as a viable solution. Besides, It is a perfect fit to address the “Infinix Smart 8 Pro 4 Not Turning On“ issue effectively.

Dr.Fone is designed to tackle various repairing problems that occur in Android devices. With its comprehensive setup, it can effectively address errors related to the Infinix Smart 8 Pro. These measures are aligned to meet the specific requirements of your device. This is helpful in minimizing the time needed for troubleshooting.

Key Features of Wondershare Dr.Fone

1. Fone allows you to repair the Android device with just a few clicks. By following the on-screen instructions, you can complete the whole process conveniently.
2. It fixes all Android-related problems, including the Black screen of death , the Play Store not working, and more.
3. This tool is compatible with all the mainstream Infinix Smart 8 Pro models, including the latest ones.

Steps Required To Resolve System Glitches via Wondershare Dr.Fone – System Repair

Now, we’ll provide you with a guide to resolve the Not Turning On issue of your Infinix Smart 8 Pro. Go through the steps mentioned below to use Dr.Fone for the repair process.

• Step 1: Open Dr.Fone and Access System Repair Tool

Starting with, you will have to activate Dr.Fone on your computer and head to the “Toolbar” panel on the left of the window. From there, navigate to the “System Repair” tool and continue with the “Android” device to proceed with the repair process.

safe & secure

4,082,195 people have downloaded it

• Step 2: Start Android System Repair

In the next step, choose the “Start” button that appears, by which your device will be recognized. You have to put in the “Name, Model, Country, and Carrier” details of the Infinix Smart 8 Pro device and hit the “Next” option. Then, you need to put your Infinix Smart 8 Pro on Download Mode following the on-screen instructions.

• Step 3: Utilize the Firmware

Afterward, the firmware will start to download automatically once the Infinix Smart 8 Pro device enters a Download Mode. You need to select the “Fix Now” button and continue typing in a “000000” code. Then, proceed with the “Confirm” option to install the firmware on your device.

• Step 4: End the System Repair of Android

Lastly, the repair process will get started and can be viewed in a progress bar. Once it ends, hit the “Done” button to conclude the activity, and check your device to see if it starts properly.

Scenario 5. Need for a Power Cycle

At times, an Android device, including the Infinix Smart 8 Pro 3/4, might benefit from a power cycle procedure. This process involves completely refreshing the Infinix Smart 8 Pro device’s system. It potentially my Infinix Smart 8 Pro 3 won’t turn on issues, temporary bugs, or system hang-ups. These issues prevent the Infinix Smart 8 Pro device from turning on or functioning properly.

Reason 1. System Freeze or Unresponsive Device

Solution: If the Infinix Smart 8 Pro 3/4 is unresponsive or frozen, perform a forced restart by holding down the “Power” and “Volume Up” for about 10 seconds. This action should force the Infinix Smart 8 Pro device to shut down and reboot, potentially resolving the issue.

Reason 2. Battery Optimization and Refreshment

Solution: Sometimes, a power cycle helps optimize the Infinix Smart 8 Pro device’s battery performance and refreshes the system. Allow the Infinix Smart 8 Pro 3/4 to completely power down, charge it for at least 30 minutes, then attempt to turn it on.

Reason 3. Software Hang-Up or Temporary Glitch

Solution. To shut down your Infinix Smart 8 Pro 3/4, press and hold the power button, then choose ‘Power Off’ from the menu that appears. After the Infinix Smart 8 Pro device powers down, wait for about 30 seconds to 1 minute to ensure it has fully shut down before moving forward. Subsequently, press and hold the power button until the Google logo displays to restart your device.

Scenario 6. Software Damaged? Restore Immediately

When an Android device experiences severe software damage, it can lead to major issues like the Infinix Smart 8 Pro 3 won’t turn on. This can hinder the functionality of the Infinix Smart 8 Pro device. It also includes the inability to turn on or persistent system malfunctions. In such cases, performing a complete phone restore becomes a necessary solution:

Reason 1. Corrupted System Files or Firmware Issues

Solution. In cases of severe software damage or corruption of system files, performing a settings reset becomes imperative. It is to restore the Infinix Smart 8 Pro device to its default settings and resolve underlying issues.

Reason 2. Factory Reset as a Solution

Performing a factory reset serves as the ultimate solution. This is true when facing critical software damage that leads to a non-responsive Infinix Smart 8 Pro 3/4. This process erases all user data, apps, settings, and files stored on the Infinix Smart 8 Pro device, reverting it to its original factory state.

Steps To Perform a Factory Reset on Infinix Smart 8 Pro 3/4

• Step 1. Access the “Settings” application on your Infinix Smart 8 Pro 3/4. Then, navigate through the menu until you locate the “System” category located further down the list. Within the “System” settings, tap the last option named “Reset Options.”

• Step 2. On the following screen, press the “Erase All Data (Factory Reset)” option. Afterward, follow the on-screen instructions to complete the process.

Scenario 7. Phone Hangs on Installed App

There are scenarios where a phone, like the Infinix Smart 8 Pro 3, hangs or gets stuck on a specific installed app. It happens during the startup process, and it can prevent the Infinix Smart 8 Pro device from turning on properly. This issue often arises due to a malfunctioning or poorly coded app. This app disrupts the Infinix Smart 8 Pro device’s startup routine, causing Infinix Smart 8 Pro 4 won’t turn on.

Reason 1. Third-Party Apps Interference

Solution: Start by booting the Infinix Smart 8 Pro 3 into Safe Mode. This mode disables third-party apps, allowing you to access the Infinix Smart 8 Pro device without interference from downloaded applications.

Click here

Reason 2. Problematic App

Solution: While in Safe Mode, observe if the Infinix Smart 8 Pro device boots up properly. If it successfully boots, it suggests that a third-party application is causing the problem. To pinpoint the problematic app, uninstall recently added apps individually and restart the Infinix Smart 8 Pro device after each removal. This process helps pinpoint the problematic app causing the hang during startup.

Reason 3. Stacked Up App Cache and Data

Solution: If the problematic app is identified, try clearing its cache and data. Go to Settings and then access “Apps.” Within “Apps,” find the Problematic App and tap “Storage & cache.” On the subsequent display, select “Clear cache “ and “Clear storage” to restore the application to its original settings. After restarting the Infinix Smart 8 Pro device, verify whether the problem persists.

Reason 4. Outdated Application

Solution: If the application is essential, ensure to seek updates within the Google Play Store. Updating the app to its latest version could potentially resolve any compatibility issues. Alternatively, if updates are not available or don’t resolve the problem, consider uninstalling and reinstalling the app.

Conclusion

In conclusion, this article has aimed to address the perplexing issue of a Infinix Smart 8 Pro 3 won’t turn on. It offered a range of solutions depending on different underlying reasons. The guide included basic methods like checking for charging issues and examining hardware damage. Moreover, it included advanced techniques like software repair tools such as Wondershare Dr.Fone.

Users are encouraged to follow the step-by-step instructions outlined here. These solutions can serve as effective remedies for resolving the problem. For more in-depth and advanced solutions, considering Dr.Fone stands as a significant option. It offers a robust system repair feature for resolving intricate software-related issues.

safe & secure

3,673,294 people have downloaded it

Also read: