Reasons for Lava Blaze 2 Pro Stuck on Startup Screen and Ways To Fix Them

There are many reasons why phones get stuck on the boot screen. It could be something as simple as physical damage or more complicated related to software problems. Having your phone stuck on the logo screen, or boot screen is annoying, and it is no surprise that people will find ways to fix this issue when encountered.

This article will share the possible reasons why your phone is stuck on the boot screen. This article will share three possible reasons for this problem and three valuable tips to help fix this issue. If all else fails, there is an application that is recommended and is sure to solve your issue in no time. Keep on reading to find out more!

It is not uncommon for phones to be stuck on the startup screen, but finding out why this happens is tricky. This section identified some of the top reasons your cellphone could have gotten stuck on the startup screen.

Physical Damage to the Phone

If you accidentally dropped your phone or knocked it on a hard surface, you could have damaged the internal hardware of your phone. This could affect your phone’s ability to reboot and result in your phone being stuck on the boot screen.

If you are 100% certain that your phone has gone through physical damage, you should seek professional help to have your phone repaired or checked. It is advised not to fix this problem yourself as your phone’s internal parts are complicated and delicate. Look for an official phone repair store and get your phone fixed for issues like your phone getting stuck on the logo.

Liquid Damage

It is not common for your phone to expose to water. Rain or water splashes are unavoidable; sometimes, your phone gets wet. Little exposure to water on the surfaces of your phone is fine. However, if you fall into a pool with your phone or drop it in a puddle of water, your phone will likely suffer from liquid damage.

Even the tiniest water droplet that seeped into your phone could damage the internal hardware of your device, often leaving you with your phone stuck on the boot screen. The first thing to do when you accidentally submerge your phone in the water is to check if the water has damaged your phone.

For iPhone users, look for the water damage indicator. If you see that it has turned from white to red, it has suffered from water damage. You have two options if your phone has suffered liquid damage. One is dismantling your phone and letting it dry for at least 48 hours. Two is bringing your phone to a repair shop to fix it.

Software Issues

Software issues are probably the most common reason your phone is stuck on the logo screen. Eight times out of ten, software issues are either caused by a failed software update, using an older version of the operating system, or having a jailbroken phone. When the software does not successfully update, the phone will have no operating system, as the old system was erased before the new software was installed.

The older operating system is also not desired as your phone typically will send periodic updates to make sure your phone is up-to-date and free from bugs. Running applications on an older operating system might lead to issues like the phone being stuck on the boot screen or the logo. Hence, updating your phone to the latest software version would be better.

Part 2. 3 Helpful Ways To Fix Phones Stuck on Boot Screen

After understanding the common problems on why your phone is stuck on the startup screen page, here are three easy solutions to try solving yourself at home.

Hard reboot your phone

To quickly fix any of your phone issues, especially when stuck on the startup screen, perform a hard reboot. The term hard reboot means turning your device off and on again. You might think this is a simple option, but this is a tried and tested method that might work on a minor glitch that results in your smartphone getting stuck on the startup screen page.

Here is an example of performing a hard reboot for an Android phone such as Lava Blaze 2 Pro. Preess and hold the Power and Volume Down buttons simultaneously for more than 7 seconds to perform the hard reboot.

Put your phone in recovery mode

If a hard reboot does not work, a natural next step is to try going into recovery mode. The recovery mode is specially designed to solve any software-related issues. It is important to note that entering recovery mode will delete all your corrupted files and replace them with a functional operating system. Hence, back up all your files to ensure you retain all your information.

Here is a step-by-step process for putting your Lava Blaze 2 Pro or Redmi smartphone in recovery mode.

Step 1: Tap and press the Power button to switch off your Lava Blaze 2 Pro/Redmi phone

Step 2:Hold the Volume Up and the Power buttons at the same time, then release the keys when the Main menu of Recovery mode appears on the screen.

Step 3: You can use the volumes buttons to navigate up and down and press the Power key to confirm the selection.

Factory Reset

If you do not want to attempt recovery mode, you can try resolving the issue of your phone being stuck on the startup screen through Factory Reset. Factory Reset, also called Hard Reset, erases all information and data on your device. As a result, it will return to the settings and recover the data it used to have when leaving the factory.

Here is an example of putting your Samsang smartphone into the Factory Reset DFU mode.

Step 1: Open the Settings application on your phone and tap General Management.

Step 2: Go to Reset > Factory data reset.

Step 3: Swipe to and tap Reset.

Note: Before carrying out a factory reset, you need to input the password of your Lava Blaze 2 Pro Account.

Click here

Bonus Tip: Best App To Solve Phone Stuck on Boot Screen

If all the solutions above do not work and you do not want to perform a factory reset on your phone, one option is to use an application called Wondershare Dr.Fone. It is one of the most effective phone recovery solutions and can help to bring your phone back to a state like it was brand new. Being stuck on the startup screen page will be a problem of the past.

The following steps will show you how to use Dr.Fone to perform system repair on your phone.

Step 1: To the Dr.Fone application using the link above and click on System Repair.

Step 2: Depending on the Lava Blaze 2 Pro device you are using, choose either Android or iPhone.

Step 3: In the next window, select the issue you are facing and click Start.

Step 4: Choose the corresponding Brand, Name, Model, Country, and Carrier from each drop-down menu and click Next.

Tip: Make sure the information you input is accurate, as it will affect the system repair if the information is inaccurate.

Step 5: Connect your device to your computer and follow the instructions on the screen to enter Download mode. Click on Next to proceed to the next step.

Step 6: Wait for the process to complete, and a new firmware will be updated on your device. Power on your phone and check if the issue still exists.

Frequently Asked Questions

The following are interesting and frequently asked questions about how to solve boot loops.

What is a boot loop?

A boot loop describes a process when Your Lava Blaze 2 Pro stays stuck in a circle of rebooting. When your phone is stuck on the startup screen, one of the strategies you will try is to restart your device. However, when your phone gets stuck in a boot loop, it is your device’s way of trying to turn it off and on again to fix the issue.

Since there is an issue with the booting process, it will keep running into the same error repeatedly, calling the boot loop. When trapped in a boot loop, your device will keep turning off and on. Most boot loop issues are software-related, such as a wrong system update.

How do you fix a boot loop?

When stuck in a boot loop, there are different troubleshooting methods for other devices. For Android phones, force your phone into its Recovery mode; from there, you can restore a previous backup. This backup could be from when the boot loop did not exist, so recovery to that backup could quickly solve the problem.

For iPhones, it is the same concept as the Android, restore your phone to the previous backup. You can use iTunes to restore a previously stored backup on your computer.

How to prevent a boot loop?

A boot loop typically starts when there is a change to your system before a reboot cycle. Most issues are software-related, such as having to do a system upgrade gone wrong or a problem that doesn’t mesh. One way to prevent this is to perform a software or system upgrade constantly. Make your phone juiced to prevent it from turning off mid-way when updating.

safe & secure

3,405,439 people have downloaded it

Conclusion

This article summarizes some of the possible reasons why your phone is stuck on the boot screen. It demonstrated three useful strategies to overcome your phone stuck in the boot with ease. However, if all the above methods do not work, why not try Dr.Fone-System Repair?

Dr.Fone-System Repair repairs the operating system issues and fixes the issue with your phone. Once you power on your phone again, you can rest assured that it will be like new.

Lava Blaze 2 Pro Screen Unresponsive? Here’s How to Fix It

Lava Blaze 2 Pro phones have become increasingly popular due to their advanced features, sleek designs, and affordable prices. These phones offer many benefits, including high-quality cameras, long battery life, and fast processing speeds. However, sometimes users may encounter problems such as a Lava Blaze 2 Pro touch screen not working, which can be frustrating and difficult.

This article aims to provide solutions for Lava Blaze 2 Pro phone users experiencing screen unresponsiveness. We will explore various reasons this issue may occur and discuss step-by-step instructions for fixing the problem. So, if your Lava Blaze 2 Pro touchscreen is not working, don’t worry – we’ve got you covered!

What Causes A Lava Blaze 2 Pro Screen Unresponsive?

There are several reasons why a Lava Blaze 2 Pro phone’s screen may become unresponsive. Some common causes include software issues, hardware problems, or issues with the touchscreen itself. It’s essential to identify the root cause of the problem to fix it properly.

Below are some possible causes of Lava Blaze 2 Pro screen unresponsiveness, along with explanations of each.

Soft-bricked software: Soft-bricking refers to the state where the phone is stuck in an infinite boot loop or unable to boot. It can occur due to corrupt system files, outdated firmware, or unsuccessful updates. For example, some Lava Blaze 2 Pro Y2 and 5A users have reported their screens getting stuck on the boot logo after a software update, rendering the Lava Blaze 2 Pro device unusable.
Equipment is worn out: Hardware problems can also cause Lava Blaze 2 Pro screens to become unresponsive. It can be due to worn-out equipment, such as a damaged LCD screen, malfunctioning touch sensor, or loose ribbon cables. These issues can also occur in any Lava Blaze 2 Pro model, including the Y2 and 5A.
**Touchscreen problems:**Sometimes, the touchscreen itself can become unresponsive for various reasons. For instance, Lava Blaze 2 Pro Y2 and 5A users may face this issue if they have accidentally dropped their phone, exposed it to water, or used an incompatible screen protector. It can result in a damaged or malfunctioning touchscreen, making it difficult or impossible to operate the phone.

The Common Solutions To Solve A Lava Blaze 2 Pro Screen Unresponsive

In the previous section, we identified the possible causes of Lava Blaze 2 Pro screen unresponsiveness, including soft-bricked software, hardware problems, and touchscreen issues. While the underlying reasons for screen unresponsiveness can be varied and complex, some common solutions can help resolve the issue. Here are three of the most common solutions to address tablet screen unresponsiveness, no matter the Lava Blaze 2 Pro model.

1. Restart The Device

Restarting the phone is typically the initial solution that comes to mind when we encounter the Lava Blaze 2 Pro black screen problem. It’s a simple and widely used method to address the issue, as the black screen problem could be caused by a software glitch, which can often be resolved by freeing up the phone’s memory.

It is the most commonly used method to fix Lava Blaze 2 Pro’s touch screen and power button issues, such as unresponsiveness. By restarting the Lava Blaze 2 Pro device, background processes are disabled, and memory is freed up, allowing programs to run smoothly and potentially resolve the problem. To restart a Lava Blaze 2 Pro device, press the Power and Volume Up buttons simultaneously, and release the Power button once the Lava Blaze 2 Prologo appears.

2. Leave The Phone And Let The Battery Drain Completely

Sometimes, the tablet screen may become unresponsive due to a software issue preventing the Lava Blaze 2 Pro device from functioning correctly. Leaving the Lava Blaze 2 Pro device unused and draining the battery helps resolve these issues. After fully discharging the battery, the Lava Blaze 2 Pro device can be recharged and turned back on, potentially resolving the issue.

3. Contact Custom Service

If restarting the Lava Blaze 2 Pro device or allowing the battery to drain doesn’t resolve the issue, seeking professional assistance is recommended. The manufacturer may provide additional troubleshooting steps or recommend sending the Lava Blaze 2 Pro device in for repair or replacement. It’s important to check the warranty before contacting customer service, which may affect repair or replacement options.

In addition to the common solutions we discussed earlier, some model-specific solutions can help resolve the screen unresponsiveness issue on Lava Blaze 2 Pro Y2 and Lava Blaze 2 Pro 5A.

4. Optimize Device Performance

One solution is to optimize the Lava Blaze 2 Pro device performance by clearing the cache, removing unwanted apps, and disabling unnecessary features. This method can help free up memory and resolve the issue.

You can clear your cached data using the default settings.

Select Settings> Storage > Cached Data.
To clear the cache, select Clear Cache.

5. Back Up And Factory Reset

Another solution is to back up the Lava Blaze 2 Pro device and perform a factory reset, which can help reset the Lava Blaze 2 Pro device to its original state and remove any software glitches that may be causing the screen unresponsiveness. The factory settings on your phone will restore any data saved by third-party applications and some of the phone’s settings when it was first built. Note that this method erases all data from the Lava Blaze 2 Pro device, so it should only be considered a last resort.

In the following steps, we will show you how to format the Lava Blaze 2 Pro Redmi 5A to erase all your data and restore it to its factory state.

Open the Settings.
Navigate to the Additional settings section of the Lava Blaze 2 Pro Redmi 5A settings.
Please scroll down the screen until you reach the Backup & reset option, then click to access it.
ClickErase all data (factory reset) to restore the network settings and applications, or completely reset the Lava Blaze 2 Pro Redmi 5A.
Select All files on the phoneto make a complete format of the Lava Blaze 2 Pro Redmi 5A.

6. Using Dr. Fone Repair

If none of the above solutions worked, you can try using Dr. Fone Repair. This software is designed to fix various software issues on Android phones, including Lava Blaze 2 Pro devices. It can fix issues such as screen stuck on boot, black screen, and other software-related problems. Dr. Fone Repair is easy to use and can protect your data and files on your phone.

Here’s how to fix repair screen unresponsiveness or any software-related issues on Lava Blaze 2 Pro Y2 and Lava Blaze 2 Pro 5A using Dr. Fone Repair:

Begin by installing and opening Dr.Foneon your PC.
Once opened, select the ‘System Repair’ option and connect your Android smartphone to your PC via USB cable.
On the next screen, choose “Android****Repair“ from the list of available options.
Click on the “Start“ button to initiate the repair process.
You will then be prompted to enter the required device information such as the Lava Blaze 2 Pro device name, model number, and firmware version.
Once you have entered the necessary information, click on the ‘Next’ button to proceed.
Follow the on-screen instructions carefully to repair your Lava Blaze 2 Pro.

How To Avoid A Lava Blaze 2 Pro Screen Unresponsive?

To avoid facing a Lava Blaze 2 Pro screen unresponsive issue, users can take several preventative measures. One important step is to update the Lava Blaze 2 Pro phone regularly to ensure the software is up to date and all bugs and glitches are fixed. Users can also use tools like Dr. Fone to regularly manage and repair data, including clearing cache and removing unwanted apps. It is also important to use quality charging cables and avoid exposing the Lava Blaze 2 Pro device to extreme temperatures or humidity, which can damage the internal components and potentially cause screen unresponsiveness. Finally, users can avoid dropping or mishandling the Lava Blaze 2 Pro device, leading to physical damage and causing the screen to become unresponsive. Users can help prevent screen unresponsiveness by taking these steps and ensuring their Lava Blaze 2 Pro device runs smoothly and reliably.

safe & secure

Conclusion

Encountering a Lava Blaze 2 Pro screen unresponsive issue can be a common problem for some Lava Blaze 2 Pro phone users. However, with the solutions we have provided in this article, you can effectively solve the problem and get your phone back up and running in no time. It’s important to remember to regularly back up your data and take preventative measures, such as avoiding harmful malware and keeping your phone updated, to avoid experiencing this issue in the future.

By using reliable software, like Dr.Fone Repair, you can ensure that your Lava Blaze 2 Pro phone is well-maintained and operating smoothly. With these solutions and tips, you can enjoy the benefits of your Lava Blaze 2 Pro phone without any interruptions.