Reasons for Realme 12 Pro+ 5G Stuck on Startup Screen and Ways To Fix Them

There are many reasons why phones get stuck on the boot screen. It could be something as simple as physical damage or more complicated related to software problems. Having your phone stuck on the logo screen, or boot screen is annoying, and it is no surprise that people will find ways to fix this issue when encountered.

This article will share the possible reasons why your phone is stuck on the boot screen. This article will share three possible reasons for this problem and three valuable tips to help fix this issue. If all else fails, there is an application that is recommended and is sure to solve your issue in no time. Keep on reading to find out more!

It is not uncommon for phones to be stuck on the startup screen, but finding out why this happens is tricky. This section identified some of the top reasons your cellphone could have gotten stuck on the startup screen.

Physical Damage to the Phone

If you accidentally dropped your phone or knocked it on a hard surface, you could have damaged the internal hardware of your phone. This could affect your phone’s ability to reboot and result in your phone being stuck on the boot screen.

If you are 100% certain that your phone has gone through physical damage, you should seek professional help to have your phone repaired or checked. It is advised not to fix this problem yourself as your phone’s internal parts are complicated and delicate. Look for an official phone repair store and get your phone fixed for issues like your phone getting stuck on the logo.

Liquid Damage

It is not common for your phone to expose to water. Rain or water splashes are unavoidable; sometimes, your phone gets wet. Little exposure to water on the surfaces of your phone is fine. However, if you fall into a pool with your phone or drop it in a puddle of water, your phone will likely suffer from liquid damage.

Even the tiniest water droplet that seeped into your phone could damage the internal hardware of your device, often leaving you with your phone stuck on the boot screen. The first thing to do when you accidentally submerge your phone in the water is to check if the water has damaged your phone.

For iPhone users, look for the water damage indicator. If you see that it has turned from white to red, it has suffered from water damage. You have two options if your phone has suffered liquid damage. One is dismantling your phone and letting it dry for at least 48 hours. Two is bringing your phone to a repair shop to fix it.

Software Issues

Software issues are probably the most common reason your phone is stuck on the logo screen. Eight times out of ten, software issues are either caused by a failed software update, using an older version of the operating system, or having a jailbroken phone. When the software does not successfully update, the phone will have no operating system, as the old system was erased before the new software was installed.

The older operating system is also not desired as your phone typically will send periodic updates to make sure your phone is up-to-date and free from bugs. Running applications on an older operating system might lead to issues like the phone being stuck on the boot screen or the logo. Hence, updating your phone to the latest software version would be better.

Part 2. 3 Helpful Ways To Fix Phones Stuck on Boot Screen

After understanding the common problems on why your phone is stuck on the startup screen page, here are three easy solutions to try solving yourself at home.

Hard reboot your phone

To quickly fix any of your phone issues, especially when stuck on the startup screen, perform a hard reboot. The term hard reboot means turning your device off and on again. You might think this is a simple option, but this is a tried and tested method that might work on a minor glitch that results in your smartphone getting stuck on the startup screen page.

Here is an example of performing a hard reboot for an Android phone such as Realme 12 Pro+ 5G. Preess and hold the Power and Volume Down buttons simultaneously for more than 7 seconds to perform the hard reboot.

Put your phone in recovery mode

If a hard reboot does not work, a natural next step is to try going into recovery mode. The recovery mode is specially designed to solve any software-related issues. It is important to note that entering recovery mode will delete all your corrupted files and replace them with a functional operating system. Hence, back up all your files to ensure you retain all your information.

Here is a step-by-step process for putting your Realme 12 Pro+ 5G or Redmi smartphone in recovery mode.

Step 1: Tap and press the Power button to switch off your Realme 12 Pro+ 5G/Redmi phone

Step 2:Hold the Volume Up and the Power buttons at the same time, then release the keys when the Main menu of Recovery mode appears on the screen.

Step 3: You can use the volumes buttons to navigate up and down and press the Power key to confirm the selection.

Factory Reset

If you do not want to attempt recovery mode, you can try resolving the issue of your phone being stuck on the startup screen through Factory Reset. Factory Reset, also called Hard Reset, erases all information and data on your device. As a result, it will return to the settings and recover the data it used to have when leaving the factory.

Here is an example of putting your Samsang smartphone into the Factory Reset DFU mode.

Step 1: Open the Settings application on your phone and tap General Management.

Step 2: Go to Reset > Factory data reset.

Step 3: Swipe to and tap Reset.

Note: Before carrying out a factory reset, you need to input the password of your Realme 12 Pro+ 5G Account.

Bonus Tip: Best App To Solve Phone Stuck on Boot Screen

If all the solutions above do not work and you do not want to perform a factory reset on your phone, one option is to use an application called Wondershare Dr.Fone. It is one of the most effective phone recovery solutions and can help to bring your phone back to a state like it was brand new. Being stuck on the startup screen page will be a problem of the past.

The following steps will show you how to use Dr.Fone to perform system repair on your phone.

Step 1: To the Dr.Fone application using the link above and click on System Repair.

Step 2: Depending on the Realme 12 Pro+ 5G device you are using, choose either Android or iPhone.

Step 3: In the next window, select the issue you are facing and click Start.

Step 4: Choose the corresponding Brand, Name, Model, Country, and Carrier from each drop-down menu and click Next.

Tip: Make sure the information you input is accurate, as it will affect the system repair if the information is inaccurate.

Step 5: Connect your device to your computer and follow the instructions on the screen to enter Download mode. Click on Next to proceed to the next step.

Step 6: Wait for the process to complete, and a new firmware will be updated on your device. Power on your phone and check if the issue still exists.

Frequently Asked Questions

The following are interesting and frequently asked questions about how to solve boot loops.

1. What is a boot loop?

A boot loop describes a process when Your Realme 12 Pro+ 5G stays stuck in a circle of rebooting. When your phone is stuck on the startup screen, one of the strategies you will try is to restart your device. However, when your phone gets stuck in a boot loop, it is your device’s way of trying to turn it off and on again to fix the issue.

Since there is an issue with the booting process, it will keep running into the same error repeatedly, calling the boot loop. When trapped in a boot loop, your device will keep turning off and on. Most boot loop issues are software-related, such as a wrong system update.

2. How do you fix a boot loop?

When stuck in a boot loop, there are different troubleshooting methods for other devices. For Android phones, force your phone into its Recovery mode; from there, you can restore a previous backup. This backup could be from when the boot loop did not exist, so recovery to that backup could quickly solve the problem.

For iPhones, it is the same concept as the Android, restore your phone to the previous backup. You can use iTunes to restore a previously stored backup on your computer.

3. How to prevent a boot loop?

A boot loop typically starts when there is a change to your system before a reboot cycle. Most issues are software-related, such as having to do a system upgrade gone wrong or a problem that doesn’t mesh. One way to prevent this is to perform a software or system upgrade constantly. Make your phone juiced to prevent it from turning off mid-way when updating.

safe & secure

3,405,439 people have downloaded it

Conclusion

This article summarizes some of the possible reasons why your phone is stuck on the boot screen. It demonstrated three useful strategies to overcome your phone stuck in the boot with ease. However, if all the above methods do not work, why not try Dr.Fone-System Repair?

Dr.Fone-System Repair repairs the operating system issues and fixes the issue with your phone. Once you power on your phone again, you can rest assured that it will be like new.

Best Methods for Realme 12 Pro+ 5G Won’t Turn On

The Realme 12 Pro+ 5G 3 boasts numerous impressive features, making it a desirable phone. However, occasional malfunctions can result in the Realme 12 Pro+ 5G 3 won’t turn on issue. This issue can be incredibly frustrating. Don’t panic if you encounter this issue! There exist solutions to rectify it. This comprehensive guide aims to assist you in diagnosing and resolving the problem.

It will offer both basic steps and advanced techniques. With clear instructions and insightful tips, we’ll help troubleshoot your Realme 12 Pro+ 5G 3. Should you encounter this setback, follow this guide diligently to revive your Realme 12 Pro+ 5G 3 and have it up and running again.

Scenario 1. Phone Not Charged

A Realme 12 Pro+ 5G 4 not turning on might simply be a victim of a drained battery due to lack of charging. Several factors could lead to this, including a damaged charging cable or adapter. Moreover, issues with the power source or a malfunctioning charging port can be the issue.

Reason 1. Damaged Charging Cable or Adapter

Solution: Replace the charging cable or adapter with a known working one. Try using a different USB-C cable and adapter to ensure it’s not a faulty connection.

Reason 2. Faulty Power Source

Solution: Verify the power source by trying different outlets or USB ports. Ensure the power source is functional by testing it with another device.

Reason 3. Charging Port Issues

Solution: Check the charging port thoroughly to identify any dirt, debris, or signs of damage. Gently clean the port using compressed air or a small brush. If there’s visible damage, consider professional repair services.

Scenario 2. Check for Damages

Sometimes, a Realme 12 Pro+ 5G 3 might not turn on due to physical damage incurred by the Realme 12 Pro+ 5G device. Instances such as accidental drops, exposure to water or moisture, or even hardware malfunctions can be the reason. These can cause visible or invisible damage, leading to Realme 12 Pro+ 5G 4 won’t turn on.

Reason 1. Physical Impact or Dropping

Solution: If the Realme 12 Pro+ 5G 3 has experienced a significant impact or drop, inspect the exterior for any visible damage. A cracked screen or internal hardware issue might prevent the Realme 12 Pro+ 5G device from turning on. Consider professional repair services if necessary.

Reason 2. Water or Moisture Exposure

Solution: If the Realme 12 Pro+ 5G 3 has been exposed to water or moisture, immediately turn it off. Moreover, do not attempt to power it on. Place the Realme 12 Pro+ 5G device in a bowl of uncooked rice or silica gel packets to help absorb moisture. Alternatively, use a vacuum or hairdryer in a cool setting to draw out moisture. It’s crucial to let the Realme 12 Pro+ 5G device dry completely before attempting to power it on.

Reason 3. Hardware Malfunction

Solution: Check for any hardware malfunction symptoms such as overheating , unusual sounds, or a burnt smell. If any such signs are evident, refrain from attempting to turn on the Realme 12 Pro+ 5G device. You should seek professional assistance from authorized service centers.

Scenario 3. Buggy Android Smartphone

An Android smartphone, including the Realme 12 Pro+ 5G 3 XL, can encounter situations where the OS becomes extremely buggy. It leads to various issues, such as the Realme 12 Pro+ 5G 3 XL won’t turn on or getting stuck in a boot loop . Software glitches, corrupted system files, or incompatible apps can contribute to such problems.

Reason 1. Device Stuck in the Boot Loop

Solution: Try initiating a force restart to help fix this issue. You can do that by pressing and holding the “Power” and “Volume Up” keys at the same time for 10 seconds.

Reason 2. Software Glitches or System Crash

Solution: If encountering issues with the Realme 12 Pro+ 5G device not powering on because of software glitches or a system crash, try initiating Safe Mode by simultaneously pressing and holding the ‘Power’ button along with a Volume key. This action will cause the Power menu to be displayed. Here, tap and hold the “Power off” for a while and tap “OK” once the Safe Mode prompt appears.

Scenario 4. System Glitches? Try Wondershare Dr.Fone as a Prioritized Solution

If you have attempted the solutions mentioned above without success, it is essential to explore a more robust option. This is important if the issue seems to be a major software problem that cannot be resolved using basic troubleshooting methods. In such cases, Wondershare Dr.Fone – System Repair emerges as a viable solution. Besides, It is a perfect fit to address the “Realme 12 Pro+ 5G 4 Not Turning On“ issue effectively.

Dr.Fone is designed to tackle various repairing problems that occur in Android devices. With its comprehensive setup, it can effectively address errors related to the Realme 12 Pro+ 5G. These measures are aligned to meet the specific requirements of your device. This is helpful in minimizing the time needed for troubleshooting.

Key Features of Wondershare Dr.Fone

1. Fone allows you to repair the Android device with just a few clicks. By following the on-screen instructions, you can complete the whole process conveniently.
2. It fixes all Android-related problems, including the Black screen of death , the Play Store not working, and more.
3. This tool is compatible with all the mainstream Realme 12 Pro+ 5G models, including the latest ones.

Steps Required To Resolve System Glitches via Wondershare Dr.Fone – System Repair

Now, we’ll provide you with a guide to resolve the Not Turning On issue of your Realme 12 Pro+ 5G. Go through the steps mentioned below to use Dr.Fone for the repair process.

• Step 1: Open Dr.Fone and Access System Repair Tool

Starting with, you will have to activate Dr.Fone on your computer and head to the “Toolbar” panel on the left of the window. From there, navigate to the “System Repair” tool and continue with the “Android” device to proceed with the repair process.

safe & secure

4,082,195 people have downloaded it

• Step 2: Start Android System Repair

In the next step, choose the “Start” button that appears, by which your device will be recognized. You have to put in the “Name, Model, Country, and Carrier” details of the Realme 12 Pro+ 5G device and hit the “Next” option. Then, you need to put your Realme 12 Pro+ 5G on Download Mode following the on-screen instructions.

• Step 3: Utilize the Firmware

Afterward, the firmware will start to download automatically once the Realme 12 Pro+ 5G device enters a Download Mode. You need to select the “Fix Now” button and continue typing in a “000000” code. Then, proceed with the “Confirm” option to install the firmware on your device.

• Step 4: End the System Repair of Android

Lastly, the repair process will get started and can be viewed in a progress bar. Once it ends, hit the “Done” button to conclude the activity, and check your device to see if it starts properly.

Scenario 5. Need for a Power Cycle

At times, an Android device, including the Realme 12 Pro+ 5G 3/4, might benefit from a power cycle procedure. This process involves completely refreshing the Realme 12 Pro+ 5G device’s system. It potentially my Realme 12 Pro+ 5G 3 won’t turn on issues, temporary bugs, or system hang-ups. These issues prevent the Realme 12 Pro+ 5G device from turning on or functioning properly.

Reason 1. System Freeze or Unresponsive Device

Solution: If the Realme 12 Pro+ 5G 3/4 is unresponsive or frozen, perform a forced restart by holding down the “Power” and “Volume Up” for about 10 seconds. This action should force the Realme 12 Pro+ 5G device to shut down and reboot, potentially resolving the issue.

Reason 2. Battery Optimization and Refreshment

Solution: Sometimes, a power cycle helps optimize the Realme 12 Pro+ 5G device’s battery performance and refreshes the system. Allow the Realme 12 Pro+ 5G 3/4 to completely power down, charge it for at least 30 minutes, then attempt to turn it on.

Reason 3. Software Hang-Up or Temporary Glitch

Solution. To shut down your Realme 12 Pro+ 5G 3/4, press and hold the power button, then choose ‘Power Off’ from the menu that appears. After the Realme 12 Pro+ 5G device powers down, wait for about 30 seconds to 1 minute to ensure it has fully shut down before moving forward. Subsequently, press and hold the power button until the Google logo displays to restart your device.

Scenario 6. Software Damaged? Restore Immediately

When an Android device experiences severe software damage, it can lead to major issues like the Realme 12 Pro+ 5G 3 won’t turn on. This can hinder the functionality of the Realme 12 Pro+ 5G device. It also includes the inability to turn on or persistent system malfunctions. In such cases, performing a complete phone restore becomes a necessary solution:

Reason 1. Corrupted System Files or Firmware Issues

Solution. In cases of severe software damage or corruption of system files, performing a settings reset becomes imperative. It is to restore the Realme 12 Pro+ 5G device to its default settings and resolve underlying issues.

Reason 2. Factory Reset as a Solution

Performing a factory reset serves as the ultimate solution. This is true when facing critical software damage that leads to a non-responsive Realme 12 Pro+ 5G 3/4. This process erases all user data, apps, settings, and files stored on the Realme 12 Pro+ 5G device, reverting it to its original factory state.

Steps To Perform a Factory Reset on Realme 12 Pro+ 5G 3/4

• Step 1. Access the “Settings” application on your Realme 12 Pro+ 5G 3/4. Then, navigate through the menu until you locate the “System” category located further down the list. Within the “System” settings, tap the last option named “Reset Options.”

• Step 2. On the following screen, press the “Erase All Data (Factory Reset)” option. Afterward, follow the on-screen instructions to complete the process.

Scenario 7. Phone Hangs on Installed App

There are scenarios where a phone, like the Realme 12 Pro+ 5G 3, hangs or gets stuck on a specific installed app. It happens during the startup process, and it can prevent the Realme 12 Pro+ 5G device from turning on properly. This issue often arises due to a malfunctioning or poorly coded app. This app disrupts the Realme 12 Pro+ 5G device’s startup routine, causing Realme 12 Pro+ 5G 4 won’t turn on.

Reason 1. Third-Party Apps Interference

Solution: Start by booting the Realme 12 Pro+ 5G 3 into Safe Mode. This mode disables third-party apps, allowing you to access the Realme 12 Pro+ 5G device without interference from downloaded applications.

Reason 2. Problematic App

Solution: While in Safe Mode, observe if the Realme 12 Pro+ 5G device boots up properly. If it successfully boots, it suggests that a third-party application is causing the problem. To pinpoint the problematic app, uninstall recently added apps individually and restart the Realme 12 Pro+ 5G device after each removal. This process helps pinpoint the problematic app causing the hang during startup.

Reason 3. Stacked Up App Cache and Data

Solution: If the problematic app is identified, try clearing its cache and data. Go to Settings and then access “Apps.” Within “Apps,” find the Problematic App and tap “Storage & cache.” On the subsequent display, select “Clear cache “ and “Clear storage” to restore the application to its original settings. After restarting the Realme 12 Pro+ 5G device, verify whether the problem persists.

Reason 4. Outdated Application

Solution: If the application is essential, ensure to seek updates within the Google Play Store. Updating the app to its latest version could potentially resolve any compatibility issues. Alternatively, if updates are not available or don’t resolve the problem, consider uninstalling and reinstalling the app.

Conclusion

In conclusion, this article has aimed to address the perplexing issue of a Realme 12 Pro+ 5G 3 won’t turn on. It offered a range of solutions depending on different underlying reasons. The guide included basic methods like checking for charging issues and examining hardware damage. Moreover, it included advanced techniques like software repair tools such as Wondershare Dr.Fone.

Users are encouraged to follow the step-by-step instructions outlined here. These solutions can serve as effective remedies for resolving the problem. For more in-depth and advanced solutions, considering Dr.Fone stands as a significant option. It offers a robust system repair feature for resolving intricate software-related issues.

safe & secure

3,673,294 people have downloaded it

Fix Realme 12 Pro+ 5G Android System Webview Crash 2024 Issue

In recent months, the term “Android WebView crash 2023“ has become a common search term among Android users seeking solutions to these app crashes . The issue has been particularly prevalent on Realme 12 Pro+ 5G devices, but it has also affected users of other Android models.

Android WebView for Android apps allows you to see and interact with web pages without leaving your app. But lately, it’s been causing more headaches than it’s worth.

So, what’s going on with Realme 12 Pro+ 5G Android System WebView, and what can you do to fix its issues? Let’s take a look. This article will shed light on Realme 12 Pro+ 5G Android System WebView crashing apps, helping you understand what triggers them, how to identify them, and what you can do to prevent them from happening again.

Part 1: What Should We Know About Realme 12 Pro+ 5G Android System WebView Crashes?

This year, the term “Android WebView crash 2023“ has become a familiar and dreaded phrase. This issue has plagued Android users, causing app crashes, freezing , and frustration. But what exactly is Android WebView, and what triggers these apps to crash?

Android WebView is an integral component of Android apps, acting as the invisible engine that renders web content within these apps. It allows users to seamlessly browse websites, watch videos, and interact with web pages without switching to a separate browser. However, when WebView crashes, it disrupts this integrated experience, causing apps to malfunction.

Several signs can indicate an impending or ongoing Android WebView crash. These include:

• App Freezing

One of the earliest signs of an Realme 12 Pro+ 5G Android System WebView crash is the app freezing. The app may become unresponsive, refusing to respond to your taps or gestures.

• Unexpected App Closures

Another common sign is unexpected app closing. The app may shut down without warning, abruptly ending your activity. Realme 12 Pro+ 5G Android System WebView crashing apps can be disruptive if you are in the middle of a conversation, shopping online, or filling out an important form.

• Error Messages

Error messages can also provide valuable clues about the impending crash. These messages may appear as pop-ups or be displayed within the app itself.

• Slow Loading Times

Slow loading times can also be a sign of an impending crash. If webpages within the app take unusually long to load or images and other content appear pixelated or distorted, it could be a sign that Realme 12 Pro+ 5G Android System WebView is struggling to handle the workload.

But why does WebView crash Android smartphones? The answer involves several factors:

• Updates and Compatibility Issues

Updates are often intended to improve software stability and compatibility, but in some cases, they can introduce new bugs or compatibility issues that lead to crashes. It is particularly evident when app developers and WebView developers release updates that don’t fully align, causing conflicts.

• Insufficient Memory

Realme 12 Pro+ 5G Android System WebView requires a certain amount of memory to operate properly. If your device is running low on memory, it can cause Realme 12 Pro+ 5G Android System WebView to crash. It is more likely to happen on older devices with less RAM.

• Outdated Realme 12 Pro+ 5G Android System WebView

The WebView app is responsible for rendering web content within Android apps. Using an outdated version of WebView can introduce known bugs and security vulnerabilities that can cause crashes.

• Conflicts With Other Apps

WebView might crash if it conflicts with other resources or processes running on the Realme 12 Pro+ 5G device. It can happen if the Realme 12 Pro+ 5G device runs low on memory or other resource-intensive apps compete for system resources.

In the next section, you’ll explore potential solutions to keep your apps running smoothly.

Part 2: Android WebView Crashes? Here Are Quick and Proven Solutions

Now you’ve identified the signs and causes of Realme 12 Pro+ 5G Android System WebView crashing apps on your phone. While these issues can be frustrating, there are several quick and proven solutions to fix them.

Uninstall WebView Updates

If you’re experiencing apps crashing after a recent update, consider uninstalling those updates. This action can potentially revert to a more stable version of Realme 12 Pro+ 5G Android System WebView.

To do this on your Realme 12 Pro+ 5G, navigate to Settings > Apps, then select Realme 12 Pro+ 5G Android System WebView. Tap the menu icon in the top right corner and tap Uninstall updates.

Update Android WebView

Regularly updating Realme 12 Pro+ 5G Android System WebView to the latest version is crucial for maintaining compatibility and addressing known bugs. Google releases updates to address these concerns, ensuring optimal performance and stability.

Check for available updates on Realme 12 Pro+ 5G devices by navigating to Settings > Apps. Then, select Realme 12 Pro+ 5G Android System WebView and tap App details in-store. If an update is available, tap Update to install it and restart your phone.

Update Google Chrome

Android WebView is closely tied to Google Chrome, and issues with Chrome can sometimes affect WebView functionality. As such, updating Chrome to the latest version can help address Android System and WebView forcibly closing your phone’s apps.

Open the Google Play Store and search for Google Chrome. If an update is available, tap Update to install it, then restart your device.

Clearing Cache and Data for Android WebView

Clearing the cache frees up phone storage and helps the app run more efficiently. To clear Realme 12 Pro+ 5G Android System WebView’s cache and data, go to Settings > Apps and select Realme 12 Pro+ 5G Android System WebView. Tap on Storage and tap Clear cache on the lower right corner of your screen.

Restart Device

A simple restart can often resolve temporary glitches or conflicts that might be causing Android WebView crashes. The specific steps to restart your phone will vary depending on your device type.

Check Internet Connection

A stable internet connection is essential for Realme 12 Pro+ 5G Android System WebView to render web content properly. If the internet connection is unstable or down, it can lead to crashes. Ensure you have a stable internet connection before using WebView-based apps.

Update Device Software

OS updates may introduce changes to the Realme 12 Pro+ 5G Android System WebView that make it more compatible with newer web standards and technologies. It can enhance the performance and stability of apps that rely on WebView for web content.

Check for available software updates by going to Settings > Software Update. If an update is required, tap on Download and install.

While problems like when the Android System WebView crashes Android phones are common, they don’t have to be a persistent problem for Realme 12 Pro+ 5G users. It’s also equally important to have effective solutions when app crashes occur. This is where Wondershare Dr.Fone steps in as a reliable and comprehensive solution for restoring app stability and overall phone performance.

Part 3: Restoring Apps and Phone Stability: A Step-by-Step Guide

Dr. Fone’s System Repair tool can help you resolve common Android scenarios, including Google Play Store malfunctions and persistent app crashes.

How To Use Dr.Fone for Realme 12 Pro+ 5G Android System WebView Crashing Apps?

Before attempting any repairs, it is crucial to back up your Realme 12 Pro+ 5G to prevent data loss. Once you have a secure backup, follow these steps to fix WebView app crashes and restore your Realme 12 Pro+ 5G to its optimal performance.

• Step 1: Download the Dr.Fone toolkit. Next, install the software on your desktop and launch it.

safe & secure

3,090,920 people have downloaded it

• Step 2: Connect your Realme 12 Pro+ 5G to your computer using a USB cable. Dr.Fone will automatically detect and establish a connection.
• Step 3: Select the System Repair function from the Toolbox homepage and choose Android to confirm your device type.

• Step 4: Click Start to begin the process of fixing Realme 12 Pro+ 5G Android System WebView crashes. Next, choose your device details and follow the in-app instructions to put your device in Download mode.

• Step 5: Dr.Fone will analyze your device’s system and download the firmware to solve the root cause of the issue.

• Step 6: Confirm your device information in the dialogue box. Dr.Fone will proceed to repair the detected WebView-related problems.

• Step 7: Once the repair is complete, your device will restart, and Realme 12 Pro+ 5G Android System WebView crashing apps should no longer occur.

More Articles About Android System:

5 Ways to Do With & Access Android Phone with Broken Screen

Google Play Services Won’t Update? 12 Fixes are Here!

Easy Ways to Bypass Google Account Verification (FRP) On Android Phones

Conclusion

The “Android WebView crash 2023“ issue was widespread for many Android users. The common issues encountered were app crashes, slow loading times, and error messages. Fortunately, these problems are manageable with the right approach.

By understanding the signs and causes of Realme 12 Pro+ 5G Android System WebView crashes, you can take proactive measures to prevent them. Quick fixes such as clearing cache and data or updates can often resolve the issue promptly.

For more comprehensive troubleshooting, Dr. Fone’s mobile solution offers a reliable and user-friendly approach. Its advanced capabilities effectively tackle app crashing issues, providing you peace of mind that your phone is functioning optimally.

safe & secure

4,684,259 people have downloaded it