Reasons for Xiaomi Redmi Note 12 Pro 5G Stuck on Startup Screen and Ways To Fix Them

There are many reasons why phones get stuck on the boot screen. It could be something as simple as physical damage or more complicated related to software problems. Having your phone stuck on the logo screen, or boot screen is annoying, and it is no surprise that people will find ways to fix this issue when encountered.

This article will share the possible reasons why your phone is stuck on the boot screen. This article will share three possible reasons for this problem and three valuable tips to help fix this issue. If all else fails, there is an application that is recommended and is sure to solve your issue in no time. Keep on reading to find out more!

It is not uncommon for phones to be stuck on the startup screen, but finding out why this happens is tricky. This section identified some of the top reasons your cellphone could have gotten stuck on the startup screen.

Physical Damage to the Phone

If you accidentally dropped your phone or knocked it on a hard surface, you could have damaged the internal hardware of your phone. This could affect your phone’s ability to reboot and result in your phone being stuck on the boot screen.

If you are 100% certain that your phone has gone through physical damage, you should seek professional help to have your phone repaired or checked. It is advised not to fix this problem yourself as your phone’s internal parts are complicated and delicate. Look for an official phone repair store and get your phone fixed for issues like your phone getting stuck on the logo.

Liquid Damage

It is not common for your phone to expose to water. Rain or water splashes are unavoidable; sometimes, your phone gets wet. Little exposure to water on the surfaces of your phone is fine. However, if you fall into a pool with your phone or drop it in a puddle of water, your phone will likely suffer from liquid damage.

Even the tiniest water droplet that seeped into your phone could damage the internal hardware of your device, often leaving you with your phone stuck on the boot screen. The first thing to do when you accidentally submerge your phone in the water is to check if the water has damaged your phone.

For iPhone users, look for the water damage indicator. If you see that it has turned from white to red, it has suffered from water damage. You have two options if your phone has suffered liquid damage. One is dismantling your phone and letting it dry for at least 48 hours. Two is bringing your phone to a repair shop to fix it.

Software Issues

Software issues are probably the most common reason your phone is stuck on the logo screen. Eight times out of ten, software issues are either caused by a failed software update, using an older version of the operating system, or having a jailbroken phone. When the software does not successfully update, the phone will have no operating system, as the old system was erased before the new software was installed.

The older operating system is also not desired as your phone typically will send periodic updates to make sure your phone is up-to-date and free from bugs. Running applications on an older operating system might lead to issues like the phone being stuck on the boot screen or the logo. Hence, updating your phone to the latest software version would be better.

Part 2. 3 Helpful Ways To Fix Phones Stuck on Boot Screen

After understanding the common problems on why your phone is stuck on the startup screen page, here are three easy solutions to try solving yourself at home.

Hard reboot your phone

To quickly fix any of your phone issues, especially when stuck on the startup screen, perform a hard reboot. The term hard reboot means turning your device off and on again. You might think this is a simple option, but this is a tried and tested method that might work on a minor glitch that results in your smartphone getting stuck on the startup screen page.

Here is an example of performing a hard reboot for an Android phone such as Xiaomi Redmi Note 12 Pro 5G. Preess and hold the Power and Volume Down buttons simultaneously for more than 7 seconds to perform the hard reboot.

Put your phone in recovery mode

If a hard reboot does not work, a natural next step is to try going into recovery mode. The recovery mode is specially designed to solve any software-related issues. It is important to note that entering recovery mode will delete all your corrupted files and replace them with a functional operating system. Hence, back up all your files to ensure you retain all your information.

Here is a step-by-step process for putting your Xiaomi Redmi Note 12 Pro 5G or Redmi smartphone in recovery mode.

Step 1: Tap and press the Power button to switch off your Xiaomi Redmi Note 12 Pro 5G/Redmi phone

Step 2:Hold the Volume Up and the Power buttons at the same time, then release the keys when the Main menu of Recovery mode appears on the screen.

Step 3: You can use the volumes buttons to navigate up and down and press the Power key to confirm the selection.

Factory Reset

If you do not want to attempt recovery mode, you can try resolving the issue of your phone being stuck on the startup screen through Factory Reset. Factory Reset, also called Hard Reset, erases all information and data on your device. As a result, it will return to the settings and recover the data it used to have when leaving the factory.

Here is an example of putting your Samsang smartphone into the Factory Reset DFU mode.

Step 1: Open the Settings application on your phone and tap General Management.

Step 2: Go to Reset > Factory data reset.

Step 3: Swipe to and tap Reset.

Note: Before carrying out a factory reset, you need to input the password of your Xiaomi Redmi Note 12 Pro 5G Account.

Bonus Tip: Best App To Solve Phone Stuck on Boot Screen

If all the solutions above do not work and you do not want to perform a factory reset on your phone, one option is to use an application called Wondershare Dr.Fone. It is one of the most effective phone recovery solutions and can help to bring your phone back to a state like it was brand new. Being stuck on the startup screen page will be a problem of the past.

The following steps will show you how to use Dr.Fone to perform system repair on your phone.

Step 1: To the Dr.Fone application using the link above and click on System Repair.

Step 2: Depending on the Xiaomi Redmi Note 12 Pro 5G device you are using, choose either Android or iPhone.

Step 3: In the next window, select the issue you are facing and click Start.

Step 4: Choose the corresponding Brand, Name, Model, Country, and Carrier from each drop-down menu and click Next.

Tip: Make sure the information you input is accurate, as it will affect the system repair if the information is inaccurate.

Step 5: Connect your device to your computer and follow the instructions on the screen to enter Download mode. Click on Next to proceed to the next step.

Step 6: Wait for the process to complete, and a new firmware will be updated on your device. Power on your phone and check if the issue still exists.

Frequently Asked Questions

The following are interesting and frequently asked questions about how to solve boot loops.

1. What is a boot loop?

A boot loop describes a process when Your Xiaomi Redmi Note 12 Pro 5G stays stuck in a circle of rebooting. When your phone is stuck on the startup screen, one of the strategies you will try is to restart your device. However, when your phone gets stuck in a boot loop, it is your device’s way of trying to turn it off and on again to fix the issue.

Since there is an issue with the booting process, it will keep running into the same error repeatedly, calling the boot loop. When trapped in a boot loop, your device will keep turning off and on. Most boot loop issues are software-related, such as a wrong system update.

2. How do you fix a boot loop?

When stuck in a boot loop, there are different troubleshooting methods for other devices. For Android phones, force your phone into its Recovery mode; from there, you can restore a previous backup. This backup could be from when the boot loop did not exist, so recovery to that backup could quickly solve the problem.

For iPhones, it is the same concept as the Android, restore your phone to the previous backup. You can use iTunes to restore a previously stored backup on your computer.

3. How to prevent a boot loop?

A boot loop typically starts when there is a change to your system before a reboot cycle. Most issues are software-related, such as having to do a system upgrade gone wrong or a problem that doesn’t mesh. One way to prevent this is to perform a software or system upgrade constantly. Make your phone juiced to prevent it from turning off mid-way when updating.

safe & secure

3,405,439 people have downloaded it

Conclusion

This article summarizes some of the possible reasons why your phone is stuck on the boot screen. It demonstrated three useful strategies to overcome your phone stuck in the boot with ease. However, if all the above methods do not work, why not try Dr.Fone-System Repair?

Dr.Fone-System Repair repairs the operating system issues and fixes the issue with your phone. Once you power on your phone again, you can rest assured that it will be like new.

Xiaomi Redmi Note 12 Pro 5G Not Connecting to Wi-Fi? 12 Quick Ways to Fix

Nowadays, it’s pretty much essential to have your Xiaomi Redmi Note 12 Pro 5G or smartphone connected to the internet. Whether you’re watching videos, looking something up, or using any kind of app, you need the internet for these applications to function correctly.

This is why it can so annoying when it gets to a point where the internet connection isn’t working. However, the problem of a web page not loading correctly is just the tip of the iceberg.

There are plenty of problems you could experience, whether it’s the Wi-Fi network keeps disconnecting on its own without any warning, perhaps a security issue where the passcode or IP address isn’t being registered properly, or even if the connection is just being super slow, even if there’s no reason too.

Luckily, despite there being so many problems out there, there are also many solutions. Today, we’re going to share with you the complete definitive guide to help you get your Xiaomi Redmi Note 12 Pro 5G connected and free from problems and issues.

Part 1: Restart your Xiaomi Redmi Note 12 Pro 5G

Begin by powering off your Xiaomi Redmi Note 12 Pro 5G and unplugging your router. Wait for about a minute before plugging in the router and turning on your device. This simple reset can often restore stable connections and fix Android wifi not working.

Part 2: Turn on Airplane mode and turn off

Turn on Airplane Mode for a few seconds, then turn it off. This maneuver refreshes your device’s network connections and might rectify the Android not connecting to wifi issue.

Part 3. Check Wi-Fi Router settings

The third step you’ll want to take is making sure the internet router in your house is working properly and is actually sending internet data to your Xiaomi Redmi Note 12 Pro 5G. Of course, if you have other internet-enabled devices connected to the same router and they’re working fine, you know this isn’t the problem.

However, if you’ve got a problem with Wi-Fi not working on your Android and other devices in your home or office, you know you’ve got a router problem. Here’s how to solve it.

1. Go to your internet router and check the indicator lights
2. While this depends on your device, a green or blue light will mean the connection is good, whereas a red light indicates a problem
3. Press the Restart button on your router and wait ten minutes before reconnecting your device and connecting again
4. Call up your internet provider to see if there’s an internet connection issue in your area
5. Open your web browser and log into your router settings to ensure your Xiaomi Redmi Note 12 Pro 5G is connected to the Wi-Fi network and is allowed to send and receive data

Part 4. Boot your Android in safe mode

If you’re unable to connect to the internet, but other devices have no issues, you may find the issues is coming from within your Xiaomi Redmi Note 12 Pro 5G itself. Fortunately, there are ways you can see whether this is the problem.

The best way to do this is to boot your device in Safe Mode. The process for doing this will depend on the make and model of your Xiaomi Redmi Note 12 Pro 5G, but the basic process goes as follows;

1. Turn off your Xiaomi Redmi Note 12 Pro 5G by holding down the Power button and tapping Power Off. Wait a few minutes to ensure the Xiaomi Redmi Note 12 Pro 5G device is completely off
2. Press and hold the Power button to turn your phone on, but the press and hold both the volume up and volume down buttons at the same time
3. You will see the words ‘Safe Mode’ appear on your screen as the Xiaomi Redmi Note 12 Pro 5G device loads
4. Now you will be booted in Safe Mode. Try connecting to the internet again to see if it works

If your device connects to the internet while in Safe Mode, you’ll know you have a problem with an app or service that’s running on your device. If this is the case, you’ll need to go through your apps and delete them and then reinstall them one at a time until you find the app or service that is causing your internet problems.

Part 5. Check the Android Wi-Fi adapter

If you’re using a Wi-Fi adapter on your device to connect to the internet, you’ll need to make sure this is working. This could be an adapter on your Xiaomi Redmi Note 12 Pro 5G itself, especially if you’re using an older device, or if you’re using an adapter to boost the ranger of your router network.

You need to check both of these to make sure your connection is working properly.

1. If using an Android Wi-Fi adapter, make sure all the Xiaomi Redmi Note 12 Pro 5G device drivers are up to date, and if you’re using an app, make sure the app is updated, and all the settings allow an internet connection
2. If you’re using a router adapter, make sure it’s set up properly, and your Xiaomi Redmi Note 12 Pro 5G is connected to the adapter using the correct passwords. Try connecting another device to see if the internet connection is working on there
3. Whichever method you’re using, try disconnecting your Xiaomi Redmi Note 12 Pro 5G and forgetting the network, and then reconnecting and entering the right password to refresh the connection

Part 6. Check SSID and IP address on Android

To make a Wi-Fi connection work, your Xiaomi Redmi Note 12 Pro 5G needs to match two codes that connect and relate to your router to establish the connection and work correctly. These are known as the SSID and the IP address.

Every wireless device will have its own codes and making sure they’re matched to the network you’re connecting to is crucial to ensuring the internet is working on your Xiaomi Redmi Note 12 Pro 5G. Here’s how to check on your Xiaomi Redmi Note 12 Pro 5G to make sure everything is correct.

1. Tap the Settings menu option, followed by Wi-Fi on your Xiaomi Redmi Note 12 Pro 5G
2. Turn on your Wi-Fi network and connect it to your router
3. Find the router name (SSID) and make sure it’s exactly the same as the SSID written on your router
4. Once connected, tap the Wi-Fi network and you will see the IP address. Check both your phone and the router codes to make sure this number matches

When these numbers are matching, if your Android is still not connecting to wifi, you’ll know this wasn’t the problem.

Part 7. Fix Android system issues in one click

If none of the solutions above are working, this could indicate a real problem with the firmware and operating system of your Xiaomi Redmi Note 12 Pro 5G. Fortunately, a fast solution to get everything working again is to completely repair the software of your phone.

You can do this easily using powerful Android recovery software known as Dr.Fone - System Repair (Android) . This is the leading repair tool on the market and is designed to fix and repair any firmware and software problems you may be having.

Dr.Fone - System Repair (Android)

A one-click tool to fix Wi-Fi not working on Android

• Can repair Android from any problem including the black screen of death
• A trusted software application used by 50+ million people around the world
• The most user-friendly mobile repair application available right now
• Supports over 1,000+ Android models and devices
• A world-class customer support team to help you whenever you need them

3,483,527 people have downloaded it

To help you have the best and the most accurate experience when using the Dr.Fone - System Repair (Android) application, here’s a complete step-by-step guide on how to use it.

Step One Make your way over to the Wondershare website and download the Dr.Fone - System Repair (Android) software. Install it onto your computer by following the on-screen instructions.

Once installed, connect your Xiaomi Redmi Note 12 Pro 5G to your computer using a USB cable, and open the software, click “System Repair”.

Step Two Click the “Android” option in the menu and then click “Start” to begin the Repair process.

Step Three On the next screen, go through the options and use the drop-down menus to make sure the information is correct for your individual device. Accept the terms and conditions of the software, and then click the “Next” button.

Step Four Confirm you want the software to carry out the repair process by typing the ‘000000’ code into the pop-up box and pressing Confirm. Make sure you read everything displayed in this box beforehand to know what’s happening.

Step Five Now put your phone into Download Mode by following the on-screen instructions, so your device is ready for the repair process. The method for getting your phone into Download Mode will vary depending on your device, so make sure you’re following the right instructions.

Step Six Once the software has detected your device in Download Mode, it will automatically begin the repair process. You need to make sure your device stays connected throughout this time, and your computer stays on.

The whole process is automatic, so you won’t need to do anything until it’s finished. Once completed, you can disconnect your phone and start connecting it to the internet as normal!

safe & secure

Click here

Part 8. Check the Wi-Fi connectivity on another phone

When experiencing problems with your Wi-Fi network, it’s worth noting the problem might not be with your phone, but rather the Wi-Fi network itself. This is why it’s important to make sure you check the connection on another device.

Of course, if you’re already using another phone on your Wi-Fi network, you know this isn’t the case. However, if you’re not sure, here’s what you need to do;

1. Get another Android or iOS phone or tablet
2. Open the Settings menu and connect to the Wi-Fi network you’re having problems with
3. Enter the password and connect to the network
4. Open a web browser on the phone and try loading a web page
5. If the page loads, you know the Wi-Fi network isn’t the problem
6. If the page doesn’t load, you know you’ve got a problem with your Wi-Fi network

Part 9. Change the password of the Wi-Fi

Each Wi-Fi network router will give the opportunity to choose and change the password you have to let devices connect to your network. It’s important you try changing this because you never know if someone else has accessed your network and could be blocking your device. Here’s how it works;

1. Log onto your computer and open your Wi-Fi settings
2. Depending on the brand and method of your individual router, navigate to the Wi-Fi password settings menu
3. Change the password to something complicated using all available digits and characters
4. Save the password and restart the router to disconnect all devices
5. Now connect your Xiaomi Redmi Note 12 Pro 5G to the router using the new password

Part 10. Reset network settings on Android

Just like the method above where you’ll be effectively resetting the network settings on your router, if this hasn’t worked, you’ll be able to reset the network settings on your Xiaomi Redmi Note 12 Pro 5G, hopefully removing the bugs and allowing you to connect.

Here’s how you can do this easily on your Xiaomi Redmi Note 12 Pro 5G;

1. From the home screen of your Xiaomi Redmi Note 12 Pro 5G, open the Settings menu
2. Tap the Backup & Reset option
3. Tap the Reset Network Settings option
4. Tap the Reset Network option
5. If you need to, enter the PIN number or passcode for the Android device, and the Xiaomi Redmi Note 12 Pro 5G device will confirm the reset has taken place
6. Reconnect your Xiaomi Redmi Note 12 Pro 5G to your Wi-Fi network for the changes to take effect

Part 11. Clear partition cache in recovery mode

As you continue to use your Xiaomi Redmi Note 12 Pro 5G, the partition cache will fill up with data your device needs and doesn’t need. However, by clearing your device’s partition cache, you can make clear up some space which should help your device have enough memory to connect to the internet.

1. Turn off your Xiaomi Redmi Note 12 Pro 5G
2. Turn it on by holding down the power button, volume button, and home button
3. When your phone vibrates, let go of the Power button, but continue to hold the volume button
4. When a menu is displayed, use the volume buttons to navigate the menu
5. Select the Android System Recovery option, followed by Wipe Cache Partition
6. Restart your device and connect to the internet

Part 12. Reset factory settings

If worse comes to worst, another option you have is to factory reset your Xiaomi Redmi Note 12 Pro 5G. As we’ve spoken about above, while using your phone from the day you started using it, your device will fill up with files and data which can become messy and causes bugs.

However, by factory resetting your device, you can start again from the factory default from which you first received it, ultimately clearing the bugs. Make sure you back up your device before proceeding because it will erase your personal files.

1. Open the Settings menu on your Xiaomi Redmi Note 12 Pro 5G
2. Navigate to System > Advanced > Reset Options
3. Tap the Reset phone option, and enter your PIN code if required
4. Tap Erase Everything
5. Wait for your phone to complete the process
6. Restart your device and connect to the internet

safe & secure

Click here

How to Exit Android Factory Mode On Xiaomi Redmi Note 12 Pro 5G?

You’ve often heard that recovery mode will solve just about any problem your Xiaomi Redmi Note 12 Pro 5G is experiencing. This is mostly true and one of the components of Android’s recovery mode, factory mode or factory reset is one of the most efficient ways to solve various problems on your device. While factory mode is often a good thing, there are times when your device can enter factory mode on its own. Other times, you can safely enter factory mode but not know how to get out.

Fortunately for you, this article will explain all aspects of factory mode and especially how to safely exit factory mode.

Part 1. What is Android Factory Mode?

Factory mode or what is commonly known as factory reset is one of the options available for you when your Xiaomi Redmi Note 12 Pro 5G is in recovery mode. Several options are available for you once you enter Recovery mode on your device but few are as effective as the wipe data/ factory reset option. This option is useful in solving a whole host of problems that your device could be experiencing.

If you have been using your Xiaomi Redmi Note 12 Pro 5G for a while now and its performance to be less than ideal, a factory reset might be a good solution. That is however not the only problem a factory reset or factory mode can solve. It will also work for a number or Android errors that you may experience, problems caused by faulty firmware updates and also tweaks made on your device that may not have worked as expected.

It is however important to note that a factory reset or factory mode does often result in the loss of all your data. Therefore a backup is necessary to protect against this data loss risk.

Part 2. Backup your Android Device First

Before we can see how to safely enter and exit factory mode, it is important to have a full backup of your device. We mentioned that a factory mode will likely erase all the data on your device. A backup will ensure that you can get your phone back to its original state before the factory mode.

In order to do a full and complete backup of your device you need to have a tool that will not only ensure that you backup everything on your device but one that makes it easy for you to accomplish this. One of the best tools in the market is Dr.Fone - Backup & Resotre (Android) . This software is designed to enable you to create a full backup of your device.

Dr.Fone - Backup & Restore (Android)

Flexibly Backup and Restore Android Data

• Selectively backup Android data to computer with one click.
• Preview and restore backup to any Android devices.
• Supports 8000+ Android devices.
• There is no data lost during backup, export or restore.

3,428,803 people have downloaded it

Follow these very simple steps to use this MobileTrans Phone Transfer software to create a full backup of your device.

Step 1. Launch Dr.Fone on your computer and choose “Backup & Restore”

Run the software on your computer and you can see all features displayed in the primary window. Choose this one: Backup & Restore. It allows you to get your device backed up entirely with one click.

Step 2. Plug in with your device

Then plug in with your device to the computer. When your devic is detected, click on Backup.

Step 3. Select the file types to backup

The program will display all the file types it can support to backup. Just select the ones you would like to backup and hit Backup.

Step 4. Start backing up your device to the computer

After choosing the file’s type for backup, click “Backup” to begin backing up your device to your computer. It will take you a few minutes, depending on the storage of the data.

Note: You can use the feature of “Restore From Backup” to restore the backup file to your device, when you have the need later.

Part 3: One Click Solution to fix Android stuck in factory mode

From the above parts, you are well aware about what is factory mode. As we discussed, this mode fixes most troubles with Android devices.

But for situations when your Xiaomi Redmi Note 12 Pro 5G gets stuck in this very same factory mode, the most feasible solution for you is Dr.Fone - System Repair (Android) . This tool fixes all Android system issues including unresponsive or bricked device, stuck on Xiaomi Redmi Note 12 Pro 5G logo or factory mode or blue screen of death with a single click.

Dr.Fone - System Repair (Android)

One click fix to Android stuck in factory mode

• You can easily fix your Android stuck in factory mode with this tool.
• The one-click solution’s ease of operation is appreciable.
• It has carved a niche being the first Android repair tool in the market.
• You don’t need to be a pro in technology to use this program.
• It is compatible with all latest Xiaomi Redmi Note 12 Pro 5G devices like Galaxy S9.

3,645,867 people have downloaded it

In this part we will explain how to exit Android recovery mode using Dr.Fone - System Repair (Android) . Prior to proceeding, you got to remember that device backup is paramount to keep your data safe. This process might erase your Xiaomi Redmi Note 12 Pro 5G data.

Phase 1: Ready your device and connect it

Step 1: Installation completion needs to be followed by running Dr.Fone on your system. Over the program window, tap ‘Repair’ afterwards and get the Android device connected.

Step 2: Select the ‘Android Repair’ option from the list to fix Android stuck in factory modeissue. Hit the ‘Start’ button soon after.

Step 3: Select Android device details on the Xiaomi Redmi Note 12 Pro 5G device information window, followed by tapping the ‘Next’ button.

Step 4: Enter ‘000000’ for confirmation then proceed.

Phase 2: Get in ‘Download’ mode for repairing the Android device

Step 1: It’s important to put the Android device in ‘Download’ mode, here are the steps to do so –

• On a ‘Home’ button-less device – turn off the Xiaomi Redmi Note 12 Pro 5G device and push down the ‘Volume Down’, ‘Power’ and ‘Bixby’ buttons for about 10 seconds and un-hold. Now, hit the ‘Volume Up’ button to get into ‘Download’ mode.

• For a device with ‘Home’ button – switch it off and hold down the ‘Power’, ‘Volume Down’ and ‘Home’ buttons together for 10 seconds and release. Click the ‘Volume Up’ button for entering ‘Download’ mode.

Step 2: Press ‘Next’ for initiating firmware downloading.

Step 3: Dr.Fone –Repair (Android) starts Android repair as soon as download and verification of firmware is done. All Android issues along with Android stuck in factory mode will be fixed now.

Part 4. Common Solutions to Exit Factory Mode on Android

Having a backup of all your data will eliminate the risk of losing any of your data. You can now safely exit factory mode using one of the 2 methods below. These two methods will work on a rooted device.

Method 1: Using “ES File Explorer”

To use this method, you will need to have installed file explorer on your device.

Step 1: Open “ES File Explorer” and then press the icon on the top left corner

Step 2: Next, go to “Tools” and then turn on “Root Explorer”

Step 3: Go to Local> Device> efs> Factory App and then open factorymode as text in the “ES Note Editor” Turn it ON

Step 4: Open keystr as text in the “ES Note Editor” and change it to ON. Save it.

Step 5: Reboot the Xiaomi Redmi Note 12 Pro 5G device

Method 2: Using Terminal Emulator

Step 1: Install Terminal emulator

Step 2: Type “su”

Step 3: Then Type the following;

rm /efs/FactoryApp/keystr

rm /efs / FactoryApp/ Factorymode

Echo –n ON >> / efs/ FactoryApp/ keystr

Echo –n ON >> / efs/ FactoryApp/ factorymode

chown 1000.1000/ efs/FactoryApp/keystr

chown 1000.1000/ efs/FactoryApp/ factorymode

chmod 0744 / efs/FactoryApp/keystr

chmod 0744 / efs/ FactoryApp/ factorymode

reboot

You can also exit factory mode on unrooted device by going to Settings> Application manager> All and the search for Factory Test and “Clear Data”, “Clear Cache”

As much as factory mode can be a useful solution to a number of problems, it can be quite annoying when it pops up unexpectedly. Now you are equipped with 2 effective solutions to help you safely exit factory mode if ever you find yourself in this situation.

Also read: