Samsung Galaxy S24+ Bootloop Problem, How to Fix it Without Data Loss

Have you, like many other users, faced the bootloop Android problem and wondered what exactly is Android boot loop. Well, Android boot loop is nothing but an error that makes your phone switch on itself every time you manually turn it off. To be precise, when your Samsung Galaxy S24+ does not remain switched off or powered off and starts to boot up automatically after a few seconds, it might be stuck in the boot loop Android.

An Android boot loop is a very common problem and is one of the first symptoms of a soft-bricked device. Also, when your device is experiencing Android boot loop issue, it does not start normally to reach the Home or Locked Screen and remains frozen at the Samsung Galaxy S24+ device’s logo, Recovery Mode or a lit-up screen. Many people fear losing their data and other files due to this error and thus, it is a very confusing situation to be in.

We understand the inconvenience caused, therefore, here are ways to tell you how to fix the bootloop problem in Android devices without losing any important data.

However, before moving on, let us learn a little about the causes for the Android boot loop error.

Part 1: What might cause the bootloop issue on Android?

Android boot loop error might seem weird and unexplainable but it occurs because of some specific reasons.

Firstly, please understand that it is a misnomer that boot loop error occurs only in a rooted device. Boot loop Android error can also occur in a stock device with the original software, ROM, and firmware.

In a rooted device, changes made, such as flashing a new ROM or customized firmware which are not compatible with the Samsung Galaxy S24+ device’s hardware or existing software, can be blamed for the boot loop problem.

Moving on, when your device’s software is unable to communicate with the system files during the start-up process, Android boot loop problem may arise. Such a glitch is caused if you have recently updated the Android version.

Also, corrupt App update files may also cause the bootloop Android issue. Apps and programs downloaded from unknown sources bring in a particular type of virus that prevents you from using your device smoothly.

All-in-all, Android boot loop error is a direct outcome of when you try to tamper with your device’s internal settings.

Hence, if you are looking for ways to guide you about how to fix boot loop issue, you will have to revamp the Samsung Galaxy S24+ device internally by either resetting it or adopting a recovery method.

Read on to know more about how to fix the bootloop error without any data loss when your device suffers from the bootloop Android problem.

Part 2: One click to Fix Android Bootloop without factory reset

If you are trying to figure out how to fix boot loop, the first option you have is the one-click fix to Android Bootloop which involves using the Dr.Fone - System Repair software.

This is designed to repair any data corruption on your device and restores your firmware to its usual working condition.

Dr.Fone - System Repair (Android)

One click to fix boot loop of Android

• #1 Android repair solution from your PC, can fix a wide range of Android system issues, such as boot loop, black screen, etc.
• The software requires no technical expertise, and anybody can use it
• A one-click solution when learning how to fix Android boot loop
• Not require root Android phones.
• Works with most Samsung Galaxy S24+ devices, including the latest Samsung Galaxy S24+ phones like S22
• Simple and easy-to-use user interface

4,689,059 people have downloaded it

To help you get started, here’s a step-by-step guide on how to use Dr.Fone - System Repair.

Note: This method can erase data on your device, including your personal files, so make sure you’ve backed up your device before proceeding.

Step #1 Download the Dr.Fone - System Repair software from the website and install it onto your computer.

Open the software and select the System Repair option from the main menu to fix the Android bootloop error.

Step #2 Connect your Samsung Galaxy S24+ to your computer using the official cable and select the “Android” option from the three menu items. Click “Start” to confirm.

You’ll then need to input the Samsung Galaxy S24+ device information, such as your carrier info, device name, model, and country/region in order to ensure you’re downloading and repairing the correct firmware to your phone.

Step #3 Now you’ll need to put your phone into Download Mode to remove the Android bootloop.

For this, you can simply follow the onscreen instructions for both phones with and without home buttons.

Click “Next”, and the software will begin downloading the firmware repair files.

Step #4 Now you can sit back and watch the magic happen!

Make sure your computer stays connected to the internet, and your device stays connected to your computer throughout the entire process. Once the firmware has been downloaded, it will be automatically installed onto your mobile device, removing the boot loop Android error.

You’ll be notified when the process is done and when you can remove your device and start using free from the boot loop Android error!

safe & secure

Part 3: Soft reset to fix Android bootloop issue

When your device is stuck in Android boot loop, it does not necessarily mean that it is bricked. Boot loop might be occurring due to a simpler problem which can be fixed by turning off your device. This sounds like a home remedy for a serious problem but it works and resolves the problem most of the time.

Follow the steps given below to soft reset your device:

Turn the Samsung Galaxy S24+ device off and take out its battery.

If you cannot take the battery out, let the phone be off for about 3 to 5 minutes, and then turn it back on.

Simply performing a soft reset on your device can help you if you are looking for solutions for how to fix the bootloop issue. This a very useful method as it does not result in any kind of loss in data and protects all your media files, documents, settings, etc.

In case the Samsung Galaxy S24+ device does not turn on normally and is still stuck in the bootloop Android problem, be prepared to use the troubleshooting techniques given and explained below.

Part 4: Boot into Safe Mode to fix Android boot loop

Booting your Samsung Galaxy S24+ into Safe Mode is a useful troubleshooting step to fix boot loop issues caused by third-party apps. When in Safe Mode, the Samsung Galaxy S24+ device will start up with only essential system apps, and any downloaded apps that might be causing conflicts won’t run. Here’s how you can boot your Samsung Galaxy S24+ into Safe Mode to address the boot loop problem:

Step 1: Power Off Your Device

Hold down the power button until it turns off completely.

Step 2: Access Safe Mode

To enter Safe Mode, follow these steps based on your device model:

• For most Android devices: Press and hold the power button to turn on your device. As soon as the manufacturer’s logo appears, press and hold the Volume Down button until the Samsung Galaxy S24+ device finishes booting. You should see “Safe Mode” displayed in the bottom left or right corner of the screen.
• Some devices might require slightly different key combinations. Refer to your device’s user manual or perform an online search for the specific method to enter Safe Mode for your model.

Step 3: Observe the Samsung Galaxy S24+ device

Once your device has booted into Safe Mode, use it for a while to see if the boot loop issue persists. If the boot loop doesn’t occur in Safe Mode, it indicates that the problem is likely caused by a third-party app.

Step 4: Identify and Uninstall Problematic Apps

Now that you’re in Safe Mode, it’s time to identify the troublesome app. Start by uninstalling recently installed apps one by one until the boot loop problem is resolved. After each uninstallation, restart your device normally to check if the boot loop still occurs. Continue this process until you find the problematic app.

Step 5: Restart Normally

Once you’ve identified and uninstalled the problematic app, restart your device normally to exit Safe Mode. Your Android device should now start up without getting stuck in a boot loop.

By following these steps and using Safe Mode to isolate problematic apps, you can effectively troubleshoot and resolve boot loop issues on your Samsung Galaxy S24+.

Part 4: Factory reset to fix Android bootloop issue

Factory reset, also known as Hard Reset, is a one-stop solution for all your software resulting in issues. Android boot loop being such problem, can be easily overcome by performing a factory reset.

Please note that all your device’s data and settings will be deleted by adopting this method. However, if you have a Google account signed in on your Samsung Galaxy S24+, you will be able to retrieve most of your data once the Samsung Galaxy S24+ device turns on.

To factory reset your Android boot loop device, you must first boot into the Recovery Mode screen.

To do this:

Press the volume down button and power button together until you see a screen with multiple options before you.

When you are at the Recovery Mode screen, scroll down using the volume down key, and from the options given, select “Factory Reset” using the power key.

Wait for your device to perform the task and then:

Reboot the phone in Recovery Mode by selecting the first option.

This solution is known to fix the boot loop error 9 out of 10 times, but if you still can’t start your Samsung Galaxy S24+ normally, consider using a CWM Recovery to resolve the Android boot loop issue.

Part 5: Use CWM Recovery to fix bootloop on rooted Android

CWM stands for ClockworkMod and it is a very popular custom recovery system. To use this system to solve the boot loop Android error, your Samsung Galaxy S24+ must be rooted with CWM Recovery System which basically means CWM must be downloaded and installed on your device.

Furthermore, to use CWM Recovery to fix boot loop on rooted Android devices, follow the steps given below:

Press the home, power, and volume up buttons to launch the CWM Recovery screen.

Note: you might have to use a different combination of keys to enter into Recovery Mode, depending on your device’s model.

Scroll down using” the volume key to select “Advanced”.

Now select “Wipe” and choose to wipe “Dalvik Cache”.

In this step, select “Mounts and Storage” to click on “Wipe” or “Cache”.

Once this is done, make sure to reboot your Samsung Galaxy S24+.

This process with successfully fix the Android boot loop error and not cause any loss of data stored on your device stuck in boot loop.

So the bottom line is that boot loop Android issue may seem like an irreparable error but it can be resolved by carefully following the techniques explained above. These methods not only tell you how to fix the bootloop problem but also prevent it from occurring in the future.

An Android boot loop is a common phenomenon with all Android devices because we tend to tamper with our device’s internal settings. Once the ROM, firmware, kernel, etc are damaged or rendered incompatible with the Samsung Galaxy S24+ device’s software, you cannot expect it to function smoothly, hence, the boot loop error occurs. Since you are not the only one suffering from the Android boot loop problem, be rest assured that the ways, given above, to combat it are recommended by users facing similar troubles. So, don’t hesitate and go ahead to try them on.

safe & secure

Samsung Galaxy S24+ Stuck on Screen – Finding Solutions For Stuck on Boot

The market has embraced Samsung Galaxy S24+ for being the pioneers in the industry. Although the company lacked in providing explicit smartphones, they were still able to catch up with the race. Samsung Galaxy S24+ C31, known to provide durability of the next level, is taking up the latest shelves of Samsung Galaxy S24+ smartphones. Although the company promises reliability, there are several problems involving such smartphones.

One prominent solution stated by Samsung Galaxy S24+ users involves the screen stuck in the boot. If your Samsung Galaxy S24+ is stuck on the “Samsung Galaxy S24+” screen for no particular reason, you will have to read this article. As this article tackles all reasons involving the problem, it comes up with the necessary solutions. These solutions will help Samsung Galaxy S24+ users find solutions for their stuck screens on the boot.

Part 1: What Causes Samsung Galaxy S24+ Screen Stuck on Boot?

Has your Samsung Galaxy S24+ recently been stuck on the boot loop screen? If it is happening or has happened to you, there are some reasons that you need to be aware of. Having an overview of the causes of Samsung Galaxy S24+ being stuck on the Android One screen can help you redirect yourself toward to right solution. Go through the list of all causes and find more about the issue involving screens stuck on boot in Samsung Galaxy S24+ smartphones:

• The Device is Damped in Liquid

It is entirely possible that your Samsung Galaxy S24+ smartphone is immersed in water. With a smartphone dipped in liquid, the Samsung Galaxy S24+ device can turn useless. If you have tried starting it again, it won’t run and might get stuck on the boot.

• Soft-Bricked Device

There are multiple conditions where your Samsung Galaxy S24+ smartphone can get soft-bricked. It majorly happens when a particular function in the Samsung Galaxy S24+ device stops working. To counter the problem, it is essential that you can get your device stuck on the boot screen.

• Outdated Device

If the equipment wears out after a certain time, there is a need to have it changed. With such obsolete models of Samsung Galaxy S24+, you will surely face issues like a screen stuck on the boot. Smartphone equipment cannot be revamped, and you will have to go for newer options.

• Software Update Required

A software update on your Samsung Galaxy S24+ smartphone might be causing issues with the screen stuck on the boot. The best way to get rid of this problem is to update your system software to the latest version.

Part 2: 5 Solutions To Solve Samsung Galaxy S24+ Screen Stuck on Boot

Do you seek to resolve the problem of the Samsung Galaxy S24+ Plus stuck on the Android One screen? There are specific techniques that can be tried as a remedy. These solutions are tried and recommended by experts. Go through the details provided below to solve the issues with your stuck Samsung Galaxy S24+ screen.

Solution 1: Force Restart Samsung Galaxy S24+

The first and most proclaimed technique to refresh Samsung Galaxy S24+ devices under such a problem is to force restart them. If the Samsung Galaxy S24+ device is stuck, you will have to perform this process by pressing the “Power” and “Volume Up” keys for 15 seconds. Continue holding the buttons until the Samsung Galaxy S24+ device vibrates or restarts by showing the screen again.

Solution 2: Leave the Phone For a While To Drain Its Battery

A conventional way to solve the issue of a stuck screen in Samsung Galaxy S24+ is to leave the phone in its position. As you let its battery drain out, the phone will turn off, and you can activate the Samsung Galaxy S24+ device again by charging it.

Once you restart it this way, all the procedures will initiate again, and the Samsung Galaxy S24+ device will be as good as new. Draining the battery has given you the leverage to regain control over the Samsung Galaxy S24+ device again.

Solution 3: Check For Updates on Samsung Galaxy S24+ Smartphones

Another quick remedy to try on your Samsung Galaxy S24+ smartphones involves updating their software. If there is any prevailing software update to install on the smartphone, you will have to check and update it by following the steps guided below:

Step 1: Open the “Settings” of your Samsung Galaxy S24+ smartphone and continue to the “System” section in the list of options. You will have to access the “Advanced” options in the “System” menu.

Step 2: As you lead to the advanced options, look for “System update” in the provided options. Look for the “Check for update” button. This will check if your Samsung Galaxy S24+ needs any software updates or not.

Solution 4: Using Wondershare Dr.Fone

One of the finest options available to perform is using a third-party platform that promises smooth operability. Wondershare Dr.Fone is a platform designed to provide such smartphones another life to survive. Its unique functionality repairs all the issues with a smartphone and makes it as good as a new one.

If your Samsung Galaxy S24+ Plus is stuck on the Android One screen, this platform is the ultimate solution for you. With the support of the latest devices and software versions, Dr.Fone – System Repair (Android) offers the best results. To know how to repair your Samsung Galaxy S24+ smartphone with the help of this tool, look through the steps featured next:

Step 1: Open Dr.Fone and Select System Repair

As you launch Dr.Fone after downloading it on your computer, continue to the “System Repair” option. You will have to start by connecting the Android device to the computer through a USB cable. Select “Android Repair” from the options available and continue to the following options.

Step 2: Define Device Information and Confirm

You will be directed to the Samsung Galaxy S24+ device information screen, where you must define the identification parameters of the Samsung Galaxy S24+ device. Select the brand, name, model, country, and carrier details for proper system recovery. On clicking “Next,” you will receive a warning where you will have to type the number “000000” to proceed with the method.

Step 3: Put Your Samsung Galaxy S24+ in Download Mode

Following this, you will have to put your Samsung Galaxy S24+ in Download Mode. For that, you need to follow the steps according to the condition of the Samsung Galaxy S24+ device:

• For Devices with Home Button:

Power off your Android and continue to press and hold the “Volume Down,” “Home,” and “Power” buttons for a few seconds. After holding them for almost 10 seconds, release and press the “Volume Up” button to enter the mode.

• For Devices without Home Button:

Turn off the Android device and hold the “Volume Down,” “Bixby,” and “Power” buttons simultaneously for a few seconds. On releasing the buttons, press the “Volume Up” button to enter Download Mode.

Click here

Step 4: Start Downloading and Verify Firmware

To proceed, tap the “Next” button to download the firmware. As you verify the firmware, the repairing process starts on your Samsung Galaxy S24+ device.

Solution 5: Contact the Customer Service Center of Samsung Galaxy S24+

If the issue of the Samsung Galaxy S24+ stuck on the “Samsung Galaxy S24+” screen continues, you will have to contact the Samsung Galaxy S24+ device’s customer support. With no proper method left for the Samsung Galaxy S24+ device, the only effective technique is to visit the authorized store for Samsung Galaxy S24+ smartphones and claim the issue with the Samsung Galaxy S24+ device. In this way, you might receive or get a fully repaired device with no additional charges if the Samsung Galaxy S24+ smartphone is under warranty.

Part 3: How to Avoid Samsung Galaxy S24+ Screen Stuck on Boot?

What if you come to know that you can avoid the Samsung Galaxy S24+ screen stuck-on boot problem? There are a set of tips and tricks that you can follow to explain how to prevent such an issue in the first place. Follow these tips to learn more about saving your Samsung Galaxy S24+ from such miserable conditions:

1. Protect from Malware

The first thing to protect your Samsung Galaxy S24+ smartphone from getting stuck on the boot is to keep it safe from unauthorized and malicious data. The best thing to keep a device secure is to follow all security protocols and avoid bypassing them. If you try downloading something not authorized by the Play Store itself, for instance, an APK, it can make your device vulnerable to malware.

2. Keep Your Device Updated

If you feel frustrated by issues like Samsung Galaxy S24+ being stuck on the Android One screen, the best thing to avoid such a problem is to keep your device updated at all costs. Whenever there is an update on your Samsung Galaxy S24+ smartphone, make sure to install it on time and properly. Do not leave updates uninstalled for no reason, as they can hinder the Samsung Galaxy S24+ device’s speed and performance.

3. Do Not Fool Around with System Files

Changing or modifying system files can be fatal for smartphones. Thus, to keep your Samsung Galaxy S24+ safe, you need to keep your hands away from such important files. Modifying a single file can make your device useless or put you in situations like a Samsung Galaxy S24+ smartphone stuck on the boot. For that, the best tip is to keep yourself out of engagement.

4. Use Wondershare Dr.Fone To Manage All Data With Ease

As you have observed, the power of Dr.Fone can be a perfect phone manager for you at all times. While providing system repair services, it can also help you manage your device’s data and other statuses. Thus, consider keeping Dr.Fone close to your device and its operations. In this way, you will be able to have complete control over all types of data present in the Samsung Galaxy S24+ smartphone.

safe & secure

4,675,795 people have downloaded it

Conclusion

With that, this brings the article on Samsung Galaxy S24+ smartphones to a conclusion. If you are still facing issues with your Samsung Galaxy S24+ stuck on the “Samsung Galaxy S24+” screen, this article is the perfect solution for your problem.

With all the provided methods, we do hope that you will be able to restore the status of your Samsung Galaxy S24+ smartphone and make it functional. For the finest results, you have also discovered Dr.Fone – System Repair (Android) as the best solution for repairing such devices.

Reliable User Guide to Fix Samsung Galaxy S24+ Running Slow and Freezing

Android smartphones have opened a lot of doors for their users. They continue to evolve year after year with the hope of giving the world a wonderful digital experience. So far, we can all agree that they’re going the extra mile and doing a really great job. Android phones today are all packed with supreme capabilities that are beneficial to everyone.

However, Android phones are still not close to perfect. They also act up sometimes and cause a stir. Some users have observed that the Android phone is running slow and freezing over time. There can be many potential reasons why Android phone runs slow suddenly. But it doesn’t mean it cannot be restored at all to its original state and function.

In this article, we will review the details of this Android phone issue. We’ll provide solutions you can try if you ever get caught in the same problem. Continue reading to learn more.

Understanding the Specs That Make Android Phones Run Fast

The issue of Android phone running slow and freezing is not limited to old devices only. The same problem has also been observed in newly purchased units. The roots of this unfortunate occurrence vary from one user to another. It depends on different elements, from external factors like users’ handling of the Samsung Galaxy S24+ device to internal factors such as its capabilities. To understand it more, below are some Android phone specifications related to the Samsung Galaxy S24+ device’s overall performance and speed.

The CPU Core Count

Unlike before, Android phones today are equipped with several cores. Each of them has the ability to execute a process alone. Therefore, the Samsung Galaxy S24+ device can handle two or more tasks at once without compromising the quality of its performance. If your Samsung Galaxy S24+ contains more CPU core, its performance surely be more powerful and speedy.

The CPU Clock Speed

Simply put, clock speed is basically the speed at which the CPU cores can carry out a cycle in a second. A faster clock speed definitely translates into the Samsung Galaxy S24+ device’s higher performance. For instance, an octa-core Android phone with a one GHz per second clock speed is a decent device. But it’s less powerful than a device with the same number of cores but runs at two GHz per second.

Random Access Memory

In a simple language, Random Access Memory (RAM) temporarily stores the data from apps that are currently running. Smartphones can be more flexible with multi-tasking if their RAM has enough space. So if you’re among these users who perform multiple tasks simultaneously, you better choose a device with more RAM.

Internal Storage

The mobile applications installed on your smartphones are directly related to internal storage. The apps save their data every time, so they behave strangely when the Samsung Galaxy S24+ device runs out of storage. If you’re using heavy mobile applications, it’s best to opt for smartphones with huge internal storage.

Reasons Why My Samsung Galaxy S24+ is Running Slow

It’s not really hard to tell why your Samsung Galaxy S24+ is slow because it’s apparently a common issue among users. But don’t worry. Most of the time, the problem is not a major concern. Here are some scenarios that may slow down your Samsung Galaxy S24+s.

Overloading Background Processes

It’s great to have an Android phone that can flawlessly multi-task. However, not all units can handle that well. As mentioned earlier, it depends on the CPU core count and the core’s clock speed. If your Samsung Galaxy S24+ is running slow and freezing, many processes may be happening at the same time. Your device’s cores and clock speed are potentially incapable of executing such demands.

Your Phone is Running Out of Storage

Mobile apps need to save data on your phone. They perform the tasks based on the data stored on the Samsung Galaxy S24+ device. So if your Samsung Galaxy S24+ is slow, it’s possible that your device is already running out of storage. Each app has its own storage requirement. If your phone goes below that, the app will surely crash and not work.

Animation Speed is Way Too Slow

You can modify the Samsung Galaxy S24+ device’s animation type and speed on your Samsung Galaxy S24+ via the developer’s option. However, altering its default settings can sometimes make the Android phone run slow. If the speed is set slower, more delays are added to the animation. Hence, it takes a while for Your Samsung Galaxy S24+ to launch an app or complete a certain process.

You’re Using an Outdated Android Version

If your Samsung Galaxy S24+ is running slow and freezing, the Samsung Galaxy S24+ device’s software is probably outdated. The mobile apps installed on your device are lagging or crashing because they’re no longer compatible with the OS. It happens most of the time. Hence, always watch out for OS updates.

Your Phone is Experiencing Some System Issues

Operating systems and device software serve as the main component of all smartphones. Sometimes, it runs into inevitable problems caused by computer bugs and other glitches. When it happens, the Samsung Galaxy S24+ device’s overall performance is affected. So that can be the reason why sometimes your Samsung Galaxy S24+ is running slow and freezing.

Your Internet Connection is Unstable

Of course, a slow internet connection can make the Android phone runs slow too. Most apps today rely heavily on the internet to execute some tasks like communicating and streaming. So don’t panic when your Samsung Galaxy S24+ is running slow and freezing. It’s possible that your internet connection is messing up with you.

What to Do When My Samsung Galaxy S24+ Lags?

It’s not as bad as the black screen of death when the Android phone runs slow. However, it can still cause some delays and inconvenience for users. So it’s really important to take action when you notice some anomalies with its speed and performance. Below are some remedies that can help you get rid of this issue.

Solution 1: Reboot Your Phone

Sometimes, minor bugs can give your device a hard time. It can be the reason why your Samsung Galaxy S24+ is running slow and freezing. If that’s the case, rebooting your phone might help a lot. Here’s how to do it.

• Step 1: For seven seconds or more, hold the Power and the Volume Down button together.

• Step 2: Several options will manifest on the screen. From there, click Restart. Wait until your device completely shuts off and restarts again.

Solution 2: Uninstall the Unused Apps to Free Up Some Storage

If your Samsung Galaxy S24+ is running slow and freezing, it’s likely because you’re running out of internal storage. You may uninstall the apps you rarely use to free up some space. Here’s how to do it.

• Step 1: On your home screen, find the app you wish to uninstall. Hold its icon until an option list appears.
• Step 2: Click Uninstall.

• Step 3: Click Ok if it asks you to confirm the action.

Wait until the app icon disappears from the home screen.

Solution 3: Set the Animation Speed a Little Faster

Altering the animation speed is not that dangerous. However, it can sometimes interfere with the Samsung Galaxy S24+ device’s smoothness if set too slow. If your Samsung Galaxy S24+ is running slow and freezing after modifying this setting, try to re-adjust it a little faster. Here’s how to do it.

Initiate the following steps first to enable the developers option on your device. Skip this if you have already activated the developers option:

• Step 1: Go to Settings.
• Step 2: Find the About Phone option. Click on it.

• Step 3: Find the Build Number. And then click on it seven times.
• Step 4: Enter your lock screen passcode if necessary.

Follow these steps to adjust the animation speed:

• Step 1: Tap Settings from your home screen.
• Step 2: From the given options, find and click Systems.
• Step 3: Click Developers options.
• Step 4: Under the Drawing section, you’ll find the following animation scale settings: Window Animation Scale, Transition Animation Scale, and Animator Duration Scale. Adjust the speed of these three options to 0.5x.

Solution 4: Update Your Phone to the Latest Android Version

It’s always recommended to update your phone to the latest Android version. Aside from repairs to some system errors, it also keeps your phone compatible with mobile apps. An outdated operating system can be the reason why your Samsung Galaxy S24+ runs slow, and the apps are freezing. Don’t worry. It’s very easy to perform. Here’s how to do it.

• Step 1: First, ensure your internet connection is strong and stable to avoid unwanted interruptions.
• Step 2: Go to Settings.
• Step 3: Click About Phone.
• Step 4: Click Check Now for Update. If there’s new software available, it will automatically appear on the screen.
• Step 5: Click Install Now. Depending on your device, it will restart itself after the installation process.

Solution 5: Reset Your Samsung Galaxy S24+ to Factory Settings

One way to restore the original performance of your Samsung Galaxy S24+ is to revert it back to factory settings. It deletes all the phone’s data and adjusts the settings to default. Most of the time, this procedure works magic. It fixes numerous issues, including the Android phone that’s slow and constantly freezing. But ensure your phone has already been backed up before commencing this step. You may use Wondershare Dr.Fone to help you back up and secure your files.

Here’s how to back up your Samsung Galaxy S24+ using Wondershare Dr.Fone:

• Step 1: Download Wondershare Dr.Fone from its official website. And then install it on your desktop.
• Step 2: Launch the application on your computer.
• Step 3: After it fully loads, connect your Samsung Galaxy S24+ to your computer.
• Step 4: From the main dashboard, find and click Phone Backup. Ensure your device is in USB Debugging mode.

Step 5: Check the files or data you wish to back up. Right after, click Backup.

Here’s how to reset your Samsung Galaxy S24+ to factory settings:

• Step 1: Go to Settings.
• Step 2: Click System.
• Step 3: Click Reset Options.
• Step 4: Click Erase All Data (Factory Reset).
• Step 5: Your Android phone will inform you about the data that will be deleted from this procedure. From there, click Reset Phone.
• Step 6: Your Android device will ask you to confirm the procedure. From there, click Erase Everything.

Solution 6: Fix the System Issue Using Wondershare Dr.Fone

The device’s operating system may sometimes run into unexpected problems. That can make your Samsung Galaxy S24+ performs slow. System issue is not a terrifying scenario at all. Thanks to Wondershare Dr.Fone, which provides instant repair to this kind of mobile problem. Here’s how to use it in easy steps.

• Step 1: Launch the Wondershare Dr.Fone application on your desktop. And then connect your Samsung Galaxy S24+ to your computer.
• Step 2: Click System Repair from the main dashboard or Toolbox section.

• Step 3: Click Android.

• Step 4: Wondershare Dr.Fone will give you a list of the Android problems that this procedure will fix. From there, click Start.

• Step 5: Wondershare Dr.Fone will ask you to confirm your device details. Review the listed details for Brand, Name, Model, Country, and Carrier. Amend them if necessary. Tick the checkbox beside the Note if you agree to the terms. Lastly, click Next to proceed.

• Step 6: At this point, you need to put your device into Download Mode. Power off your device. And then hold these three buttons altogether: Volume Down, Home (or Bixby if you’re using a newer model), and Power buttons. Finally, press the Volume Up button.

• Step 7: Wondershare Dr.Fone will automatically download the firmware that matches your device’s specifications. Wait until the process has been completed.

• Step 8: Thereafter, the details about the newly downloaded firmware package will be displayed on the screen. From there, click Fix Now.

• Step 9:  Before initiating the installation process, Wondershare Dr.Fone will ask you to review and confirm the firmware details. It will also let you know that this procedure will erase the phone’s data. If you agree to the terms, enter 000000 into the input box and click Confirm.

• Step 10: Wait while Wondershare Dr.Fone installs the new firmware to your device.

• Step 11: A notification will immediately appear after installing the new firmware. Click Done if your phone starts normally. Otherwise, click Try Again to repeat the process.

safe & secure

3,660,347 people have downloaded it

Conclusion

Android phone is capable of performing lots of stuff. It can assist you in both your personal and professional tasks. But if it’s sluggish and doesn’t execute optimally, the good things it promises all go down the drain. So if you notice that your Samsung Galaxy S24+ is running slow and freezing, act fast to resolve the issue. Wondershare Dr.Fone can be of great help in this kind of situation. It’s an all-in-one mobile solution that can assist you with system repair, phone backup, data recovery, and a lot more.

Also read: