Simple Solutions to Fix Android SystemUI Has Stopped Error For Motorola Razr 40 Ultra

In this article, you will learn possible causes of Android SystemUI stopping error and 4 methods to fix this issue. Get Dr.Fone - System Repair (Android) to fix Android SystemUI stopping more easily.

Android SystemUI isn’t responding or Android, unfortunately, the process com.android.systemui has stopped is a not a rare error and is observed in all Android devices these days. The error usually pops up on your device while you are using it with a message on the screen saying Android. Unfortunately, the process com.android.systemui has stopped.

The Android SystemUI isn’t responding error message may also read as “Unfortunately, SystemUI has stopped”.

Android SystemUI error can be very confusing as it leaves affected users with only one option, i.e., “OK”, as shown in the images above. If you click on “OK” you will continue to use your device smoothly, but only until the SystemUI isn’t responding error pops-up on your main screen again. You may restart your device, but the Android SystemUI has stopped the problem continues to annoy you until you find a permanent solution for it.

If you are also among the various users who see Android, unfortunately, the process com.android.systemui has stopped error, then do not worry. SystemUI isn’t responding. Error is not a serious issue and can be tackled easily by carefully examining the reasons behind the problem.

Looking for suitable solutions to fix Android SystemUI has stopped error? Then read on to find out all about Android SystemUI isn’t responding error and the most effective ways to fix it.

Part 1: Why Android SystemUI Has stopped happens?

Android device owners would agree that OS updates are very helpful as they fix the bug problem and improve the overall working of your device. However, sometimes these updates may be infected due to which they do not download and install properly. A corrupted OS update may cause Android; unfortunately, the process com.android.systemui has stopped error. All Android updates are directly designed around the Google App, and thus, the problem will persist until the Google App is also updated. Sometimes, even the Google App update may cause such a glitch if it is not successfully downloaded and installed.

Another reason for the Android SystemUI isn’t responding error to occur, maybe because of flashing a new ROM or due to improper firmware update installation. Even when you restore the backed up data from cloud or your Google Account, such Android, unfortunately, the process com.android.systemui has stopped error may show up.

It is not possible to say for sure which one of the above-mentioned reasons is causing your device to show Android SystemUI is not responding error. But what we can do is move on to fixing the Android SystemUI by following any one of the three methods given the following segments.

Part 2: How to fix “com.android.systemui has stopped” in one click

As we’ve learned that Android system UI isn’t responding issue is primarily because of the Android OS updates not installed properly or were corrupted. Hence, there comes the need for a powerful Android system repair tool that can help you rectify such annoying errors.

To serve the purpose, we would like to introduce, Dr.Fone - System Repair (Android) . It is one of its kind of applications and is highly recommended as it has a proven success rate to resolve almost all Android system issues.

It’s now time to understand how to fix Android ‘unfortunately, the process com.android.systemui has stopped’ or in simple words, Android system UI isn’t responding.

Note: Before we proceed to Android repair, please ensure to make a backup of all your data . This is because the Android repair process may wipe out all the data on your device to fix the Android OS issues.

Phase 1: Connect and prepare your Motorola Razr 40 Ultra

Step 1 – Download the Dr.Fone toolkit over your PC. Install it and launch it over. Opt for the “System Repair” tab from the main screen and get your Motorola Razr 40 Ultra connected to the PC.

Step 2 – You need to select “Android Repair” from the left panel and then hit the ‘Start’ button.

Step 3 – Next, you need to select the correct information about your device (i.e., brand, name, model, country/region, and carrier details). Check the warning down below and hit “Next”.

Phase 2: Boot Android in ‘Download’ mode to perform the repair.

Step 1 –You’re now required to boot your Android in Download mode. Here’s what you need to do to put your Android in DFU mode.

If your Android has a Home button:

Turn off your device. Hold down “Volume Down + Home + Power” buttons altogether for about 10seconds. Let go of the buttons afterward and hit the Volume Up to boot in download mode.

In case your Android has no Home button:

Turn off your device. Hold down “Volume Down + Bixby + Power” buttons altogether for about 10seconds. Let go of the buttons afterward and hit the Volume Up to boot in download mode.

Step 2 – Once done, hit “Next” to initiate the downloading of the firmware.

Step 3 – As soon as the download completes, the Android repair will automatically be started by the program.

Step 4 – In a just a matter of a few minutes, your Android system UI isn’t responding issue will be resolved.

Part 3: Uninstall Google updates to fix Android SystemUI issue

All Android SystemUI isn’t responding errors are circled the Google App as the Android platform is heavily dependent on it. If you have recently updated your Google App and the Android, unfortunately, the process com.android.systemui has stopped error keeps popping up at regular intervals, make sure you uninstall Google App updates as soon as possible.

Follow the steps given below to fix the Android SystemUI has stopped issue by rolling back the Google App updates:

Visit “Settings” and select “Apps” or “Application Manager”.
Now swipe to view “All” Apps.
From the list of Apps, select “Google App”.
Finally, tap on “Uninstall Updates” as shown hereunder.

Note: To prevent the Android SystemUI isn’t responding error to occur in the future, do not forget to change your Google Play Store settings to “Do Not Auto-Update Apps”.

Part 4: Wipe Cache partition to fix Android SystemUI error

Android, unfortunately, the process com.android.systemui has stopped error can also be fixed by clearing your cache partitions. These partitions are nothing but storage locations for your modem, kernels, system files, drivers, and built-in Apps data.

It is advisable to clear Cache portions regularly to keep your UI clean and free of glitches.

Android SystemUI isn’t responding error can be overcome by clearing the cache in recovery mode.

Different Android devices have different ways to put it in recovery mode. Refer to your device’s manual to enter the recovery mode screen on your device and then follow the steps given below to fix Android; unfortunately, the process com.android.systemui has stopped error by clearing the cache partition:

Once you are the recovery mode screen, you will see several options as shown in the screenshot.

Use the volume down key to scroll down and select ”Wipe cache partition” as shown below.

After the process is completed, select “Reboot System” which is the first option in the recovery mode screen.

This method will help you de-clutter your device and erase all the clogged up unwanted files. You may lose App related data too, but that is a small price to pay to fix the Android SystemUI isn’t responding error.

If the Android SystemUI has stopped the problem persists, there is only one way out. Read on to find out about it.

Part 5: Fix Android SystemUI error by factory reset

Factory Resetting your device to fix Android; unfortunately, the process com.android.systemui has stopped error is a desperate measure and should be the last thing to do on your list. Take this step only when the above mentored two techniques fail to work.

Also, make sure you take a back-up of all your data and contents stored in your Motorola Razr 40 Ultra on the cloud, Google Account or an external memory device because once you perform a factory reset on your device, all media, contents, data and other files are wiped out, including your device settings.

Follow the steps given below to factory reset your device to solve the Android SystemUI isn’t responding problem:

Visit “Settings” by clicking the settings icon as shown below.

Now select “Backup and Reset”.

In this step, select “Factory data reset” and then “Reset Device”.
Finally, tap on “ERASE EVERYTHING” as shown below to Factory Reset your device.

After the factory reset process is completed, your device will automatically restart, and you will have to set it up once again.

The whole process of factory resetting your Motorola Razr 40 Ultra might sound tedious, risky, and cumbersome, but it helps to fix the Android SystemUI has stopped error 9 out of 10 times. So, think carefully before using this remedy.

Android SystemUI isn’t responding or Android, unfortunately, the process com.android.systemui has stopped error is commonly seen by users on their devices. It is not a random error and is linked to either the software, Google App, cache partition, or data stored in the Motorola Razr 40 Ultra device. It is fairly simple to deal with this issue as all you need to do is install or roll back your Android OS update, uninstall Google App updates, clear cache partition, or factory reset your device to clear all data, files, and settings stored in it. The methods listed and explained above are the best ways to fight the problem and to prevent it from troubling you in the future. These methods have been adopted by affected users all over the world who recommend them because they are safe and involve minimum risks as compared to other tools to solve the Android SystemUI has stopped error. So go ahead and try them now!

What To Do When Motorola Razr 40 Ultra Has Black Screen of Death?

Have you ever got the error of freezing the Android device home screen? Or the notification light keeps blinking without anything shown on display? Then you are facing Android black screen of death.

This scenario is common with many Android mobile users, and they always hunt for solutions to get rid of this Android black screen problem. Here are some more situations that can assure you that you are facing Android black screen of death.

The light of the phone is blinking but the Motorola Razr 40 Ultra device is not responding.
The phone is hanging and freezing very frequently.
The mobile is rebooting and crashing more often and the battery is draining a lot faster.
Phone restarts on its own.

If you face these situations, you might be facing the Android black screen of death issue. Follow this article, and we’ll discuss how to get rid of this annoying problem at ease.

Part 1: Why Android device gets black screen of death?

Similar to the “Blue Screen of Death “ (BSOD) on computers, the Android Black Screen of Death indicates a severe system crash or malfunction. When this issue occurs, the Motorola Razr 40 Ultra device’s display remains blank, and you are unable to interact with the Motorola Razr 40 Ultra device, access apps, or perform any actions. The cause of the Android black screen of death can vary, but some common factors include:

Install incompatible apps or apps with bugs and viruses.
Have bugs or errors in the Android operating system.
Keep the mobile charged for long after it’s fully charged.
Use a non-compatible charger.
Use an old battery.
Incorrectly install or incomplete system updates.
Excessive heat due to heavy usage or environmental factors.

If you face the situations mentioned above, this is clearly a case of the Android screen black. But don’t worry about that. You can follow the article below to get rid of this situation on your own.

Part 2: How to rescue data when Android gets black screen of death?

This annoying Android black screen of death is making it impossible to access your internal data. So, the possibility is that you might lose all the data. We have a solution for all of your data recovery problems from a damaged Android device.

The solution for recovery data is the Dr.Fone - Data Recovery (Android) toolkit by Wondershare. This tool is highly appreciated worldwide and very popular for its feature-rich user interface. This tool can perform a lot of functions that can successfully recover the data from a damaged device.

Use this revolutionary toolkit to get the data back from the black tablet screen of death. Connect the Motorola Razr 40 Ultra device with the PC after installing this tool and follow the on-screen instruction, and all of your data will be transferred to your PC. Unfortunately, the tool is supported on selected Motorola Razr 40 Ultra Android devices as of now.

Dr.Fone - Data Recovery (Android)

A Dedicated Tool to Retrieve Data from Broken Android Devices .

Recover data from broken devices or devices that are damaged in any other way, such as those has black screen.
Recover photos, videos, contacts, messages, call logs, and more.
Highest retrieval rate in the industry.
Compatible with most Motorola Razr 40 Ultra devices.

3981454 people have downloaded it

Part 3: 9 Solutions to fix the black screen of death of Android

3.1 One click to fix the black screen of death

Facing an Android device with a black screen of death, I believe, is one of the gloomiest moments of one’s life, especially for those who know little about the technical part of Android. But here is the truth we have to admit: most cases of the black screen of death arise due to system glitches in Android.

What to do? Shall we find someone who is tech-savvy to seek help? Come on, this is the 21st century, and there are always one-click solutions to deal with technical issues for laymen like you and me.

Dr.Fone - System Repair (Android)

Fix Black Screen of Death for Android In One Click

Fix all Android system issues like a black screen of death, OTA update failures, etc.
Update the firmware of Android devices. No technical skills are required.
Support all the new Motorola Razr 40 Ultra devices like Galaxy S22, S23, etc.
Click-through operations to bring Android out of the black screen of death.

3,364,231 people have downloaded it

Here are the easy steps to get your Motorola Razr 40 Ultra out of the black screen of death:

Download and install the Dr.Fone tool. After launching it, you can see the following screen pop up.
Select “System Repair” from the home page, and then click on the “Android “.
Click “Start” to commence the Android system repair. In the next screen, select and confirm your Android model details like name, model, country, etc. and go on.
Boot your Android into Download mode by following the on-screen demonstrations.
Then the tool will download the Android firmware and flash the new firmware to your Motorola Razr 40 Ultra.
A moment later, your Motorola Razr 40 Ultra will be repaired completely, and the black screen of death will be fixed.

Video guide: How to fix the Android black screen of death step by step

safe & secure

3.2 Force restart your Motorola Razr 40 Ultra

Because it is the quickest and most painless solution, most people do this when their Android phone screen goes black too fast. The majority of phone issues can be resolved by performing a hard reboot. Here are the necessary measures if you haven’t tried this method before.

To reboot your Motorola Razr 40 Ultra, you may need to press a specific key combination, depending on the model you have, but most Android devices can be force restarted by doing the following steps:

Step 1: Press and hold the power button for about 10-15 seconds. Keep holding it until the Motorola Razr 40 Ultra device restarts.

Step 1: For Motorola Razr 40 Ultra devices, press and hold down the Power and Volume Down buttons for about 7 seconds.

3.3 Check and clean your phone

This method might not be popular with Android users, but this can do wonders when dealing with an Android black screen of death issue. To do this, follow the steps provided below:

Step 1: Ensure your phone’s buttons and ports are not stuck before anything else.

Step 2: See if dirt prevents you from turning the Motorola Razr 40 Ultra device on. Then, quickly press and release the button a few times.

Step 3: If the phone isn’t charging normally, ensure the charging port isn’t clogged with dust and debris by checking and cleaning it. You can gently blow out any debris in the charging port or use a wooden toothpick to pry it open.

Step 4: After you’re done with the cleaning, it’s best to charge the phone for at least 10 minutes. Just give it a quick charge and then try to restart it.

3.4 Remove the battery

If your phone’s battery is removable, you can try taking it out and trying again if restarting and cleaning it doesn’t fix the problem.

Step 1: To get started, take the phone apart by starting at the back.

Step 2: After 20 to 30 seconds, take out the battery and put it back in.

Note: When replacing the battery, ensure the metal contacts correctly connect to the phone.

This easy and straightforward method should help you fix your Android screen black issue, but if it doesn’t, continue reading, as this article got more techniques you can try.

3.5 Recharge the Motorola Razr 40 Ultra device

If your Motorola Razr 40 Ultra screen suddenly goes black, let the battery die completely. Then once the battery is completely dead, you should plug it in to charge and turn it on by pressing the Power button. Try to check if you still encounter the issue after doing so.

3.6 Wipe cache partition to fix black screen of death

If your Motorola Razr 40 Ultra turns on, but the screen remains black, clearing the cache partition should solve the problem. After all, keeping caches on your phone would cause it to run more slowly and cause other problems. Therefore, the issue can be resolved by clearing the cache partition. Check the following steps on how to do this below:

Step 1: Turn off your Motorola Razr 40 Ultra.

Step 2: Boot the Motorola Razr 40 Ultra device into Recovery Mode.

Note: The steps necessary to enter recovery mode will vary depending on your specific Android phone model. To ensure you’re doing the correct steps for your device, consult the user manual or look it up online. The following instructions work for Motorola Razr 40 Ultra devices:

For older Motorola Razr 40 Ultra devices with the home button: Press and hold the Volume Up button, the Power button, and the Home buttons simultaneously.
For newer Motorola Razr 40 Ultra devices without the home button: Press and hold the Volume Up button and the Power button together.
If the Motorola Razr 40 Ultra device logo appears, release your grip, and the phone will restart.

Step 3: Find the Wipe cache partition option using the volume controls after entering Recovery Mode.

Step 4: Select Wipe cache partition by pressing the Power button.

Step 5: On the next screen, use the Volume Down button to highlight “Yes” and then press the Power button to confirm the cache wipe.

Step 6: The cache partition will be wiped, and you will see the “Cache wipe complete” message on the screen.

Step 7: Use the Volume Down button to navigate to the “Reboot system now” option and press the Power button to reboot your Motorola Razr 40 Ultra device.

After rebooting, you can see that you have successfully got rid of the annoying Android black screen of death. For most of the cases, this method solves the problem. If not, you have to move to the next method.

3.7 Uninstall incompatible apps

Android screen black can be a result of installing a bug or incompatible apps. If you have recently installed an app that crashes frequently, that may be the reason for the issue. Uninstalling the app from the Motorola Razr 40 Ultra device may solve the problem with ease. For doing this, you need to boot your device in Safe mode. Follow the below steps.

Step 1: Power down your device by pressing and holding the Power button until a menu appears.

Step 2: Navigate to Safe Mode by pressing and holding the Power Off button.

Step 3: Tap the “Safe mode” icon to enter Safe mode. You should now see Safe Mode at the Motorola Razr 40 Ultra device’s bottom.

Step 4: After selecting Settings, head to the Apps section.

Step 5: Select the app by clicking on it; the App Info window should appear. To uninstall the app, tap the Uninstall option from the menu below the screen.

Step 6: Now restart the Motorola Razr 40 Ultra device by pressing the power button and let it boot up in normal mode.

If the app is the reason for Android black screen of death, then after uninstalling, you can get rid of this issue. If not, now you have to factory reset your device to solve the problem.

3.8 Reboot to safe mode

Even after multiple attempts to launch them, certain applications act suspiciously and cause the Motorola Razr 40 Ultra device to crash. When an Android phone suddenly goes black, you can often isolate the problem to a specific app by booting into Safe mode.

Step 1: Begin by restarting your phone. To do that, press the Power button until a menu appears.

Step 2: Press the Power Off button to enter Safe mode.

Step 3: Activate Safe mode by clicking the “Safe Mode” icon.

Step 4: To return to Normal mode, turn off your device and then turn it back on.

3.9 Factory reset to fix Android black screen of death

The factory reset is the option that enables the factory state of your device by erasing all data, settings, bugs, and apps. Your device will be fresh like factory condition after this reset. Worth mentioning here, you’ll lose all the internal data and installed apps after this reset. So, to overcome the Android tablet black screen of death, you must perform this action as the last option. Follow the below steps carefully.

Step 1: Turn off the Motorola Razr 40 Ultra device. Then press the Volume Up + Power button + home button (or press Volume Up + Power buttonS) altogether and let the mobile boot into recovery mode.

Step 2: After booting up in recovery mode, you can find the “Factory data reset” option. Navigate to that option with the volume up and down arrow and select it with the power button.

Step 3: In this step, you need to confirm your action by tapping on the “Yes” option. After this, your device will start erasing. This may take a while to complete the whole process.

Now, your device will reboot automatically and you can see the Android black screen of death problem is solved.

Part 4: How to avoid Android black screen of death?

These are the general methods to overcome the situation of Android screen black. But to avoid this situation, here are a few tips to follow –

Install apps from trusted suppliers only.
Use security or antivirus software on your device.
Take a backup at regular intervals.
Always keep Android OS updated.
Don’t keep your mobile charged for a long duration after a full charge.
If your battery gets old, replace it soon.
Keep your device’s storage well-maintained. Regularly delete unnecessary data.
Close unused apps running in the background to conserve system resources.
Prevent phone overheating by avoiding excessive usage, and not exposing it to direct sunlight for extended periods.

By following these steps, you should avoid the most unpleasant situations, such as the Android screen black. We all know that “Prevention is always better than cure”.

The Bottom Line

There could be a lot of reasons why an Android black screen issue occurs, but the important thing is knowing the correct ways how to fix it. And this article has covered nine proven methods to help you fix an Android phone screen black problem.

But among the methods discussed above, Dr.Fone – System Repair just stood out as this program does not only help you with a black screen of death problem, but it covers many other Android system issues too. It’s also a highly intuitive program that requires no skills to operate.

safe & secure

[8 Quick Fixes] Unfortunately, Snapchat has Stopped on Motorola Razr 40 Ultra

Have you ever been deep in conversation with a loved one or friend, taking advantage of all the funny filters and games Snapchat has to offer when you’ve suddenly been presented with the ‘Unfortunately, Snapchat has Stopped’ error code? This is usually followed by the app crashing back to the main menu.

If so, don’t worry; you’re not alone. Snapchat crashing in this way is nothing new, but it can be incredibly annoying when it keeps happening and stops you from enjoying the conversations you care about.

Fortunately, there are plenty of solutions out there to help you out and get the app working again as it should do. Today, we’re going to explore them all to help you get back to what you were doing before and as though there was never a problem.

Part 1. Install Snapchat again from Google Play Store

One of the best ways to resolve the Snapchat crashing problem or Snap Map not working issue is to delete the app and reinstall it again. When you’re using your phone, there is data continually flowing around and data being sent here, there, and everywhere.

During these processes, bugs can occur, and if they can’t sort themselves out, the best thing to do is to reset your app and start from a fresh installation. Here’s how to do it.

Step 1: Hold down the Snapchat app from your main menu and press the ‘x’ button to uninstall the app.

Step 2: Open the Google App Store from your device and search ‘Snapchat’ in the search bar. Find the official app page and download the app onto your device.

Step 3: The app will automatically install itself once downloaded. Open the app, sign in to your account using your log-in details, and you should be able to use the app like normal.

Part 2. Check for new Snapchat Updates

Hand in hand with the problem above, sometimes a bug can restrict Snapchat from working, or perhaps your personal update settings. If you receive a Snapchat from someone with an upgraded version, this can crash your app.

Here’s how to make sure you’re running the latest version of Snapchat is Snapchat isn’t responding.

Launch the Play Store and navigate to the My Apps and Games page
Tap the Update button
The app will now automatically update to the latest version

Part 3. Wipe the cache of Snapchat

If you have a lot of data in your Snapchat cache, this can cause the app to become overloaded in which you’ll need to clear it to start again and refresh the app. This is a common problem that can cause Snapchat has stopped working error.

Here’s how to fix it.

Open the Snapchat app and tap the Profile icon on the top left-hand side of your screen
Tap the Settings gear icon on the top right
Scroll down the Settings menu and tap the Clear Cache option
Here, you can choose to Clear All, but you can select individual areas if you prefer
Tap the Confirm option to clear your cache preference completely

Part 4. Fix the system issues that caused Snapchat stopping

If you’re experiencing the Snapchat crashing on Android often, or you’re experiencing similar errors with other apps, this can be an indication that there’s something wrong with your Android operating system.

The best way to fix this is to repair your device using the software known as Dr.Fone - System Repair (Android). This is a powerful repair system that can completely recover your device from any errors, including the Snapchat keeps crashing error.

Dr.Fone - System Repair (Android)

Dedicated repair tool to fix Snapchat crashing on Android.

Recover your device from any problem, including black screen or unresponsive screen.
Supports over 1000+ unique Android devices, models, and brands.
Trusted by over 50+ million customers around the world.
Can fully repair faults with your Motorola Razr 40 Ultra’s firmware in a few simple steps.
One of the most user-friendly applications in the world.

3,889,035 people have downloaded it

To help you make the most of this Android repair software and to fix your Snapchat not responding error, here’s a step-by-step guide on how to use it.

Step 1: Download the Dr.Fone - System Repair (Android) software to your computer. Install the software to your Mac or Windows computer by following the onscreen instructions.

Once completed, open the software, so you’re on the main menu.

Step 2: From the main menu, click the System Repair option, followed by the Android option. Of course, if you have an iOS device you want to repair in the future, the option is there if you want it. Also, connect your Motorola Razr 40 Ultra to your computer using the USB cable.

Step 3: Confirm details.

On the next screen, use the drop-down menus to confirm the model, brand, operating system, and carrier of your device. Click Next to confirm the details are correct.

Step 4: You’ll now need to put your phone into Download Mode, sometimes referred to as Recovery Mode. For this, you can follow the onscreen instructions. Make sure your device stays connected to your computer throughout this process.

The method will slightly differ depending on whether your device has a home button, so make sure you follow the right instructions for your individual device.

Step 5: Once in Download Mode, the software will now download and install a fresh version of your Motorola Razr 40 Ultra’s operating system. This can take some time, so make sure your device stays connected, and your computer stays on and doesn’t shut down.

Step 6: That’s it! Once you see the screen saying your device has been repaired, you’ll be able to close the Dr.Fone - System Repair (Android) software, disconnect your phone, and can start using Snapchat as normal without the Snapchat not responding error coming up!

safe & secure

Part 5. Check for the Android update

Similar to some of the other solutions we’ve listed above, if you’re using an outdated version of the Android operating system, but the latest version of Snapchat is coded to the most recent, this can be a cause for the Snapchat crashing on Android problem to occur.

Fortunately, it’s easy to check to make sure you’re running the latest version of Android and to download and install the update if you need it. Here’s how, which will help to sort out your Snapchat keeps crashing Android problems.

Step 1: Open the Settings menu on your Motorola Razr 40 Ultra and select the About Phone option.

Step 2: Tap the ‘Check for Updates’ option. If an update is available, you’ll then have the option to Install Now or Install Overnight. If no update is available, you’ll see a notification stating your device is up to date and no action is needed.

Part 6. Connect to another Wi-Fi

In some cases, you may be trying to connect to a Wi-Fi network that’s not very stable. This may keep cutting the connection to your device, which in turn is causing Snapchat to crash on Android.

To resolve this, you can simply try connecting to another Wi-Fi network or a data plan to see whether this is the problem. If so, changing network and then using the Snapchat app should stop any error messages from occurring.

Step 1: Open the Settings menu on your Motorola Razr 40 Ultra, followed by the Wi-Fi option.

Step 2: Tap the new Wi-Fi network you’re currently connected to, and then tap the ‘Forget’ option, to stop your phone connecting to it.

Step 3: Now tap the new Wi-Fi network you want to connect to. Insert the Wi-Fi security code and connect. Now try reopening and using the Snapchat to see if you can use it.

Part 7. Stop using the custom ROM

If you’re running a custom Android ROM on your device, with some versions of the ROM and some apps, you’re going to experience errors simply because of the way the apps and the ROMs are coded and designed.

Unfortunately, there’s no easy fix to this, and if you want to continue using the app, you’ll need to reflash your Motorola Razr 40 Ultra back to its original firmware, and then wait until the ROM developers update the ROM to be compatible with social apps like Snapchat.

However, this reflashing process is simple thanks to the Dr.Fone - System Repair (Android) software that we listed above. To follow the detailed step-by-step guide, follow the steps on Part 4 of this article, or follow the quick guide instructions below.

Download and install the Dr.Fone - System Repair (Android) software to your computer
Connect your Motorola Razr 40 Ultra to your Windows computer using the USB cable
Open the software and click the Repair option.
Select the Android device repair option
Make sure your carrier and device information are correct
Put your device into Download Mode by following the onscreen instructions
Allow the software to repair your Motorola Razr 40 Ultra automatically

Part 8. Reset the factory settings of your Android

One of the last resorts you can take is factory resetting your Motorola Razr 40 Ultra back to its original settings. From the day you first started using your device, you’ve been using the system and downloading files and apps, and over time this increases the chances of creating a bug.

However, by resetting your device to factory settings, you can reset these bugs and get your apps and device working again free from the Unfortunately, Snapchat has stopped error message. Here’s how to factory reset your device.

Make sure you back up your personal files from your device first like your photos and music files because factory resetting your device will clear your device’s memory.

Step 1: Tap the Settings menu on your device and click the Backup and Reset option.

Step 2: Click the Reset Phone option. That’s it! The phone will take several minutes to complete the process, after which your phone will be reset to its original state.

Fix Guide

Simple Solutions to Fix Android SystemUI Has Stopped Error For Motorola Razr 40 Ultra | Dr.fone