[Solved] Warning: Camera Failed on Honor X50i

In this article, you will learn why camera fails on Honor X50i devices, how to make camera work again, as well as a system repair tool to fix this issue in few clicks.

Honor X50i devices are one of the best Android devices available in the market and their users are always satisfied with their features. However, it is a recent observation that many Honor X50i users complain about Honor X50i camera failed error while using the camera App on the Honor X50i device. It is a strange error and pops up suddenly with only one option to tap on, i.e., “OK”

The error message reads as follows: “Warning: Camera Failed”.

Once you click on “OK” the app shuts down abruptly and your Honor X50i camera is failed. We understand this is not a very pleasing situation, thus, here are ways to tackle the camera failed Honor X50i issue. Let us now move ahead and find out why exactly you experience Warning: Camera Failed error and how to fix it.

Part 1: Why Honor X50i phone has Warning: Camera Failed error?

We are all aware that no device runs smoothly, without any glitches. We also know that there is a cause behind every problem. Listed below are a few reasons behind camera failed error, especially on Honor X50i devices:

1. If you have recently updated your OS version, there are chances that certain bugs are preventing the camera App from functioning normally. Also, if the update is interrupted and not downloaded completely, certain apps may suffer.
2. There are chances of your internal storage being cluttered with unwanted Apps and files leaving no space for the camera App to save its data and work smoothly.
3. If you haven’t cleared camera Cache and Data, the chances of the App to get clogged up increase tremendously which disrupt its working.
4. Warning: Camera Failed error can also be a direct outcome of a change in the system settings or the Honor X50i device’s internal settings.
5. Finally, if you tamper a lot with the camera settings and do not update the App whenever it is available, Honor X50i Camera App will not be efficient.

There might be much more reasons for the camera failed error, but these are the most obvious ones. Now let us now move on to troubleshooting the problem.

Part 2: How to fix Honor X50i Camera Failed in One Click?

If you are experiencing some kind of issues in your Honor X50is such as Honor X50i camera failed, the Honor X50i device stopped working, black screen, play store not working, etc. There is a special software is designed for such kind of issues in Android devices, i.e. dr. fone. The tool enables the users to fix various kinds of issues in the Honor X50i devices and perform a complete system repair so the Honor X50i device starts working normally.

Dr.Fone - System Repair (Android)

One-click solution to fix camera failed on Honor X50i devices

• The tool has a one-click operation which makes it super easy to use.
• You don’t need any technical skills expertise to operate the software.
• The software supports all the Honor X50i devices including the latest and older ones.
• The software can fix the “warning camera failed”, the app is crashing, failed update, etc.

4,616,396 people have downloaded it

Note: You have to remember that the system repair may erase all the Honor X50i device data. So, create a backup of your Honor X50i data first and then try fixing the Honor X50i phone.

Follow the steps given below and fix the camera failed error:

Step 1. Download the software on your computer and launch it. Connect your device and select the System Repair option from the main interface. In the next screen, select Android Repair module.

Step 2. You will have to provide the Honor X50i device details accurately to ensure that the software provides a precise firmware package to be downloaded. Enter brand, name, model, country, and carrier of your device and agree to the terms and condition.

Step 3. Now put your device in the download mode. The software will provide you with a guide to put the phone in download mode to begin the downloading process.

Step 4. As soon as the firmware is downloaded, the software will automatically initiate the repair process. You will be able to see the ongoing repair.

When the software is done repairing the system, you will be notified. Thus, the Camera failed Honor X50i error in your phone will be fixed.

Part 3: How to fix Camera Failed error by clearing camera data?

Has anyone ever informed you that it is absolutely necessary to keep clearing camera data every once in a while? Yes, since it deletes all unnecessary data stored in respect of the App and no, it does not mean that all your photos and videos will get deleted. Just follow the steps given below to clear camera data:

1. First, visit “Settings’” on your Honor X50i device and select “Apps” or Application Manager”.

2. Now a list of all Apps will appear before you. Keep scrolling down until your find “Camera”.

Tap on “Camera” to open the “Camera Info” screen and once you are there, hit “Clear Data” option as shown below.

That’s all, now return to the Home Screen and access the camera again. Hopefully, it will work now.

Part 4: How to fix Camera Failed error by removing third-party Apps?

Another tip to fix Honor X50i camera failed error is by deleting a few unwanted third-party Apps (recently installed) to free some space in the Honor X50i device’s internal storage. It is essential to create and keep storage space for the camera App to function smoothly and allow it to store its data as well. Also, if this issue only happens recently, it might be some newly installed Apps causing some glitches with the camera.

Simply, follow the instructions given below to remove Apps from Honor X50i Devices:

1. Click on the “Settings” icon on the Home Screen and from the options before you, select “Apps”/ “Application Manager”.

2. You will see that a list of downloaded and built-in Apps will open up before you as follows.

3. Now, once you select the App you want to uninstall, the App Info screen will appear. Tap on “Uninstall” option and then tap on “Uninstall” again on the pop-up message.

The App will be removed immediately and its icon will disappear from the Home Screen and you will notice an increase in the storage capacity of your device.

Part 5: How to fix Camera Failed error by wiping Cache Partition?

This method might seem tedious and time-consuming and you may also lose your data and essential settings. However, wiping the Cache Partition only cleans your device system internally and gets rid off any unwanted and trouble making elements causing Warning: Camera Failed error. Follow the step-by-step guide given below to clean Cache Partition smoothly:

1. Firstly, switch off the Honor X50i device by pressing the power button and tapping on “Power Off” as shown in the screenshot below. Then wait for the lit screen to turn off completely before proceeding further.

2. Now, press and hold the power on/off, home and volume up button simultaneously. Your device will now vibrate. This a signal to let go of the power button (only).

3. Once the Recovery Screen appears, leave all buttons and use the volume down key till you reach “Wipe Cache Partition”.

4. Now, to select the option to use the power on/off button and wait for the process to get over. Once this done, tap on “Reboot system now” and see that your device restarts normally.

You may try to use the camera app once the process completes.

Part 6: How to fix Camera Failed error by Reset Settings?

Resetting the camera settings solves the problem 9 out of 10 times and thus is worth a try.

1. To reset, first, launch the Camera App by tapping on its icon.

2. Then go to Camera “Settings” by tapping on the circular gear like icon.

3. Now look for “Reset Settings” options and click on it.

Once done, go back to the Home Screen and start the camera App again to use it.

Part 7: How to fix Camera Failed error by Factory Reset?

Lastly, if the above-mentioned techniques do not help you in fixing the camera failed error, you can consider performing a Factory Reset. Note: This method will delete all your saved data so it is advised to backup before you start the process.

Here are the steps to factory reset your device to fix “Warning: Camera Failed” Error:

1. Start by visiting “Settings” on your Honor X50i device on which the camera has failed.

2. Now from the list of options before you, select “Backup and reset” and move ahead.

3. Now you must first select “Factory data reset” and then tap on “Reset Device” as shown in the screenshot below.

4. Finally, you have to click on “Erase Everything” and wait for the Honor X50i device to reboot itself.

Note: You will have to set up your Honor X50i device from scratch once it is reset, however, that is a small price to pay to fix your Camera App.

Warning: Camera Failed error is not a rare phenomenon and many users experience it on daily basis. So, there is no need to panic, All you need to do is carefully follow the instructions given above and repair your Camera App yourself. You do not need to seek any technical assistance for the same as the camera failed issue is not difficult to deal with. So go ahead and try these tricks to enjoy using the Camera App on your Honor X50i devices.

Reasons for Honor X50i Stuck on Boot Screen and Ways To Fix Them

One of the main reasons why people own a phone is for convenience. It will be ironic if that device, supposed to grant convenience, provides problems instead. Some people face this when their Android phone is stuck on the logo page and unable to do anything. As expected, this is common in Android phones and is why people are unhappy with Android phones.

This article will share the possible reasons why your Android phone is stuck on the boot screen. This article will share three possible reasons for this problem and five valuable tips to help fix this issue. If all else fails, we have an application to share and recommend that is guaranteed to solve your problem in no time. Keep on reading to find out more!

Part 1. Why Is Your Honor X50i Stuck on the Boot Screen?

There are countless reasons why a problem happens, just like why your Android phone is stuck on the logo page. This section sieved out the top 3 reasons why your Android boot screen happens and some tips to overcome it.

1. Changes to the Software

Android is a flexible operating system. It allows users to customize it in any way they desire, which is Android’s beauty. The customizable nature of the operating system allows users to unlock, root, flash, and tinker. However, this flexibility in customization might be a double edge sword. Accidental tampering with the Android system might result in software problems, such as being stuck on the Android boot screen.

Fortunately, this is not a complicated fix. Android accepts different fixes and allows the system to return to how it once was. Even with software issues, the system does not get completely inoperable. The best way to fix changes to the software is to start from the beginning of the process. This might offer the best chance for you to restore your phone to normal.

Although it is fun to customize and change the software, following trusted sources ensures you do not damage your phone. Having an Android phone stuck on the logo page is one of the many examples of the problems that might happen if changes to the software go out of hand.

2. Android Software Updates

Updates are a common cause of Android phones stuck on the logo. It happened when the update did not complete as it should have been. Several reasons for incomplete updates, such as poor internet connection, the connection between computer and phone being lost, a power cut, the phone freezing, and the list go on. When an update is uncompleted, issues such as being stuck at the Android boot screen and many others might occur.

Before an update starts, your mobile device will notify you of the duration of the update. As a tip, set aside an additional 10-15 minutes on top of the update duration to ensure your update is completed successfully. It will be ideal for activating the software update only when there is sufficient power in your phone or keep it charging during the update.

When an update is disrupted or stopped before it completes, the existing Android version will become corrupted while the new software to be updated is incomplete. This means that your Honor X50i has no system to run on. Always complete your software updates, and you will not have the problem of your Android phone getting stuck on the logo.

3. Malfunctioning Applications

If you noticed that your Android phone is stuck on the logo page only after installing certain apps, there is a high chance that the app is not compatible with the existing apps in your phone or with the Android version. When an app conflicts with the Android system or other apps, this will run into problems with your phone.

This problem typically happens when an app is downloaded from a third-party source, not the official Google Play Store. This app from a third-party source might be malicious or contain a virus. This can cause problems such as being stuck at the Android boot screen.

To overcome this, locate the app that has been giving you issues and remove the app from your phone. Restart your device, and you should be able to have your Honor X50i functioning properly.

Part 2. 5 Helpful Ways To Fix Android Phones Stuck on Boot Screen

After understanding the common problems on why your Android phone is stuck on the logo page, here are five easy solutions you can try solving at home.

1. Force Reboot

When encountering problems with your Honor X50i, such as being stuck at the Android boot screen, you should first try a forced reboot. This simple yet effective solution could be what you need to solve all your Android problems. It is essential to leave your device turned off for at least a minute or two before turning it back on.

2. Pull Out Battery

Another way to restart your Honor X50i when it is frozen is to try taking the battery out. Android devices are designed with a removable battery, and sometimes you can resolve the issue easily by removing the battery and replacing it after a couple of seconds. Then, turn on your device again and test to see if your Android phone is stuck on the logo page.

If it works, then the problem is solved. However, some Android devices come with a built-in battery. For these kinds of devices, a stimulated battery pull should be attempted. A simulated battery pull is a set of instructions telling your Honor X50i to switch off and on again. If your device does not offer the simulated battery pull option, omit this troubleshooting option.

3. Charge Your Device

If your Android phone is stuck on the logo page and not getting past it, no matter how many times you have tried, it may be due to a low battery! As simple as it sounds, plug your device into a power outlet and try restarting your phone. You might be surprised that this simple fix is all it takes to solve your Android problem.

4. Wipe Cache Data

Cache refers to a software or hardware component of an Android device that stores your program and data for reference. This data might result from the daily usage of your device or duplicate data from a different source on the Honor X50i device. Similar to a computer, if the cache occupies too much space on your device, it might cause your Honor X50i to become slower and eventually get stuck at the Android boot screen.

Wiping out the cache data from your Honor X50i could free up more space, allow your device to function faster, and avoid problems such as being stuck at the Android boot screen. Do not worry; wiping the cache data is entirely safe and will not lead to any loss of important data or programs on your phone.

5. Factory Reset

If all the methods above fail, performing a factory rest might be your last option. However, it is important to note that performing a factory reset will erase everything on your phone, including apps, contacts, photos, etc. As a tip, back up all your data from your device before performing a factory reset. That way, you can still retrieve all your precious information after the reset.

Follow the steps below to perform a factory rest on your Honor X50i:

Step 1: Turn off your phone and press the Power button and Volume Down button at the same time

Step 2: Use the Volume button to scroll the options and highlight Wipe data/factory reset. Press the Power button to begin the factory reset.

Part 3. Bonus Tip: Best App To Solve Android Phone Stuck On Boot Screen

If all the solutions above do not work and you do not want to perform a factory reset on your phone, one option is to use an app called Dr.Fone. It is one of the most effective phone recovery solutions and can help to bring your Honor X50i back to a state like it was brand new. Being stuck on the Android boot screen will be a problem of the past.

Refer to the tutorial below to solve your Android phone is stuck on the logo page issue.

Step 1: Download and install Dr.Fone – System Repair (Android) on your computer. Open the application and connect your Honor X50i to the computer.

Step 2: Select the issue you face on the next page. If you use a Honor X50i phone, select Stuck at Honor X50i Logo. Alternatively, you can click on Black Screen or Stuck in Boot Loop.

Step 3: Input the Brand, Name, Model, Country, and Carrier of your phone and click on Next.

Step 4: Follow the instructions provided on the page and wait for the system repair to finish. After which, click on Done to complete the process.

safe & secure

Conclusion

This article summarizes some possible reasons your Android phone is stuck on the logo page. Five useful strategies were shared to easily overcome your Honor X50i being stuck in the boot. However, if all the above methods do not work, we recommend trying the Dr.Fone-System Repair.

Dr.Fone-System Repair repairs the operating system issues and fixes the problem with your Honor X50i. Once you power on your Honor X50i again, you can rest assured that it will be like new.

7 Solutions to Fix Chrome Crashes or Won’t Open on Honor X50i

Google Chrome is one of the most popular web browsers in the world. It is fast, secure, and easy to use. However, like any other app, it is not free from errors. Many users have reported that Chrome crashes or won’t open on their Honor X50i. If you are also facing this issue, then you have come to the right place. In this article, we will discuss the reasons behind this problem and provide you with 7 solutions to fix Chrome crashes or won’t open on Honor X50i.

Being one of the widely used browsers, Chrome is always our rescue whenever vital information is our need. Imagine, you launched Chrome for some urgent work and all of a sudden, got “Unfortunately Chrome has stopped” error. You re-opened it thinking about proper functioning of it now but to no avail. Does this situation sound familiar? Are you in a same problem as well? Fret not! We will discuss in this article why your Chrome is crashing on Android and the potential solutions to do away with the problem. Please read the article attentively and know what helps you best.

Part 1: Too many tabs opened

One of the main reasons why Chrome keeps crashing could be the multiple opened tabs. If you keep open the tabs, it may slow down the performance of Chrome and the app will use RAM. As a result, it will obviously get stopped midway. Therefore, we suggest you to close the tabs which are opened. And once you do that, exit the app and then launch it again.

Part 2: Too much memory used

When Chrome or any other app keeps running on the background, issues like “Unfortunately Chrome has stopped” are likely to occur. Moreover, the opened apps will eat the memory of your device. Hence, as the next solution, it is suggested that the Chrome should be closed by force quitting and then you need to try to launch it again to work. See if it works or still Chrome is not responding.

1. Simply tap on the Home button twice to get on the recent apps screen. Please note that the button may vary to reach the screen. Please check once and move accordingly.

2. Now simply swipe the app up/left/right (according to the Honor X50i device).

3. The app will be force quit now. You can then start it again to check if thing get back to normal.

Part 3: Chrome cache overflowing

While using any app for long, the temporary files for those gets collected in the form of cache. And when cache is not getting cleared, one may face the freezing, crashing or sluggish apps. And this could also be the cause why your Chrome keeps stopping. Hence, the following steps will show you how to clear cache and make Chrome work as before.

1. Open “Settings” and go to “Apps & Notifications”.

2. Look for “Chrome” and tap on it.

3. Go to “Storage” and click on “Clear Cache”.

Part 4: Exclude the issue of website itself

Most probably Chrome is not able to support the website you are trying to access. We doubt if the particular website you are making use of is the culprit and making Chrome keeps stopping. In such case, we would like to recommend you to make use of another browser and try to access the website from there. See if this works or not. If now, please follow the next solution.

Part 5: Android firmware corruption

Another reason why your Chrome has stopped could be the corrupted software. You can’t expect anything normal when your firmware corruption occurs and so in the case of Chrome. If this is the case, the re-flashing the stock ROM is the most recommended solution. And the best that can help you in this is none other than Dr.Fone - System Repair (Android) . Within one click, it vows to help users in flashing the ROM without any complications. Read the advantages offered by this tool.

Dr.Fone - System Repair (Android)

Android repair tool to fix crashing Chrome

• It works like a pro no matter what problem your device is stuck with.
• More than 1000 types of Android devices are compatible with this tool.
• Easy to use and holds higher success rate.
• No need for any special technical knowledge to use this
• Offers an incredible interface from which anyone can work with.

3,605,074 people have downloaded it

How to Use Dr.Fone - System Repair (Android) when Chrome is crashing on Android

Step 1: Install the Tool to Begin

Start downloading it from there. Install it once downloading is completed and open the tool. The main screen will show you some tabs. You need to hit on “System Repair” among those.

Step 2: Get Android Device Connected

Now, you need to connect your Honor X50i with the computer using USB cord. When the Honor X50i device is connected successfully, click on the “Android Repair” option from the left panel.

Step 3: Enter Details

On the following screen, you need to select the right phone brand, name model and enter career details. Check once to confirm and hit on “Next”.

Step 4: Download Firmware

Now, follow the steps displaying on the screen to enter the DFU mode. When you do this, click on “Next” and the program will download the firmware.

Step 5: Repair the Issue

Once the firmware is downloaded, you will notice that the repairing process will start by the program. Wait until it gets finished and try to start Chrome again and you’ll surely get rid of the problem.

Click here

Part 6: File Downloading issue from Chrome

While you were trying to download from internet, the file didn’t download properly or it might get stuck and eventually crashing Chrome occurs. In such instances, many times, uninstalling and installing helps. Therefore, follow the steps below to uninstall and install Chrome and fix Chrome keeps stopping

• Go to “Settings” and tap on “Apps”.
• Select “Chrome” and tap on “Uninstall Updates”.

• Now, you need to re-install it from Play Store. From the “My Apps” section, tap on Chrome and update it.

Part 7: Clashes between Chrome and system

Of still you are receiving “Unfortunately Chrome has stopped” pop-up, it might be because of the incompatibility between the Chrome and system. Maybe your device is not updated and therefore is at odds with the Chrome app. So, the last tip that we would like give you is to update your Honor X50i. Following are the steps for it. Follow them and stop the Chrome crashing on Android issue.

• Go to “Settings” and tap on “System”/”About Phone”/”About Device”.
• Now, choose “Software Update”/”System Update” and your device will detect if there is any update present on your device. Proceed accordingly.

Also read: