Solved Warning Camera Failed on Motorola Edge+ (2023) | Dr.fone
[Solved] Warning: Camera Failed on Motorola Edge+ (2023)
In this article, you will learn why camera fails on Motorola Edge+ (2023) devices, how to make camera work again, as well as a system repair tool to fix this issue in few clicks.
Motorola Edge+ (2023) devices are one of the best Android devices available in the market and their users are always satisfied with their features. However, it is a recent observation that many Motorola Edge+ (2023) users complain about Motorola Edge+ (2023) camera failed error while using the camera App on the Motorola Edge+ (2023) device. It is a strange error and pops up suddenly with only one option to tap on, i.e., “OK”
The error message reads as follows: “Warning: Camera Failed”.
Once you click on “OK” the app shuts down abruptly and your Motorola Edge+ (2023) camera is failed. We understand this is not a very pleasing situation, thus, here are ways to tackle the camera failed Motorola Edge+ (2023) issue. Let us now move ahead and find out why exactly you experience Warning: Camera Failed error and how to fix it.
Part 1: Why Motorola Edge+ (2023) phone has Warning: Camera Failed error?
We are all aware that no device runs smoothly, without any glitches. We also know that there is a cause behind every problem. Listed below are a few reasons behind camera failed error, especially on Motorola Edge+ (2023) devices:
- If you have recently updated your OS version, there are chances that certain bugs are preventing the camera App from functioning normally. Also, if the update is interrupted and not downloaded completely, certain apps may suffer.
- There are chances of your internal storage being cluttered with unwanted Apps and files leaving no space for the camera App to save its data and work smoothly.
- If you haven’t cleared camera Cache and Data, the chances of the App to get clogged up increase tremendously which disrupt its working.
- Warning: Camera Failed error can also be a direct outcome of a change in the system settings or the Motorola Edge+ (2023) device’s internal settings.
- Finally, if you tamper a lot with the camera settings and do not update the App whenever it is available, Motorola Edge+ (2023) Camera App will not be efficient.
There might be much more reasons for the camera failed error, but these are the most obvious ones. Now let us now move on to troubleshooting the problem.
Part 2: How to fix Motorola Edge+ (2023) Camera Failed in One Click?
If you are experiencing some kind of issues in your Motorola Edge+ (2023)s such as Motorola Edge+ (2023) camera failed, the Motorola Edge+ (2023) device stopped working, black screen, play store not working, etc. There is a special software is designed for such kind of issues in Android devices, i.e. dr. fone. The tool enables the users to fix various kinds of issues in the Motorola Edge+ (2023) devices and perform a complete system repair so the Motorola Edge+ (2023) device starts working normally.
Dr.Fone - System Repair (Android)
One-click solution to fix camera failed on Motorola Edge+ (2023) devices
- The tool has a one-click operation which makes it super easy to use.
- You don’t need any technical skills expertise to operate the software.
- The software supports all the Motorola Edge+ (2023) devices including the latest and older ones.
- The software can fix the “warning camera failed”, the app is crashing, failed update, etc.
4,616,396 people have downloaded it
Note: You have to remember that the system repair may erase all the Motorola Edge+ (2023) device data. So, create a backup of your Motorola Edge+ (2023) data first and then try fixing the Motorola Edge+ (2023) phone.
Follow the steps given below and fix the camera failed error:
Step 1. Download the software on your computer and launch it. Connect your device and select the System Repair option from the main interface. In the next screen, select Android Repair module.
Step 2. You will have to provide the Motorola Edge+ (2023) device details accurately to ensure that the software provides a precise firmware package to be downloaded. Enter brand, name, model, country, and carrier of your device and agree to the terms and condition.
Step 3. Now put your device in the download mode. The software will provide you with a guide to put the phone in download mode to begin the downloading process.
Step 4. As soon as the firmware is downloaded, the software will automatically initiate the repair process. You will be able to see the ongoing repair.
When the software is done repairing the system, you will be notified. Thus, the Camera failed Motorola Edge+ (2023) error in your phone will be fixed.
Part 3: How to fix Camera Failed error by clearing camera data?
Has anyone ever informed you that it is absolutely necessary to keep clearing camera data every once in a while? Yes, since it deletes all unnecessary data stored in respect of the App and no, it does not mean that all your photos and videos will get deleted. Just follow the steps given below to clear camera data:
1. First, visit “Settings’” on your Motorola Edge+ (2023) device and select “Apps” or Application Manager”.
2. Now a list of all Apps will appear before you. Keep scrolling down until your find “Camera”.
Tap on “Camera” to open the “Camera Info” screen and once you are there, hit “Clear Data” option as shown below.
That’s all, now return to the Home Screen and access the camera again. Hopefully, it will work now.
Part 4: How to fix Camera Failed error by removing third-party Apps?
Another tip to fix Motorola Edge+ (2023) camera failed error is by deleting a few unwanted third-party Apps (recently installed) to free some space in the Motorola Edge+ (2023) device’s internal storage. It is essential to create and keep storage space for the camera App to function smoothly and allow it to store its data as well. Also, if this issue only happens recently, it might be some newly installed Apps causing some glitches with the camera.
Simply, follow the instructions given below to remove Apps from Motorola Edge+ (2023) Devices:
1. Click on the “Settings” icon on the Home Screen and from the options before you, select “Apps”/ “Application Manager”.
2. You will see that a list of downloaded and built-in Apps will open up before you as follows.
3. Now, once you select the App you want to uninstall, the App Info screen will appear. Tap on “Uninstall” option and then tap on “Uninstall” again on the pop-up message.
The App will be removed immediately and its icon will disappear from the Home Screen and you will notice an increase in the storage capacity of your device.
Part 5: How to fix Camera Failed error by wiping Cache Partition?
This method might seem tedious and time-consuming and you may also lose your data and essential settings. However, wiping the Cache Partition only cleans your device system internally and gets rid off any unwanted and trouble making elements causing Warning: Camera Failed error. Follow the step-by-step guide given below to clean Cache Partition smoothly:
1. Firstly, switch off the Motorola Edge+ (2023) device by pressing the power button and tapping on “Power Off” as shown in the screenshot below. Then wait for the lit screen to turn off completely before proceeding further.
2. Now, press and hold the power on/off, home and volume up button simultaneously. Your device will now vibrate. This a signal to let go of the power button (only).
3. Once the Recovery Screen appears, leave all buttons and use the volume down key till you reach “Wipe Cache Partition”.
4. Now, to select the option to use the power on/off button and wait for the process to get over. Once this done, tap on “Reboot system now” and see that your device restarts normally.
You may try to use the camera app once the process completes.
Part 6: How to fix Camera Failed error by Reset Settings?
Resetting the camera settings solves the problem 9 out of 10 times and thus is worth a try.
1. To reset, first, launch the Camera App by tapping on its icon.
2. Then go to Camera “Settings” by tapping on the circular gear like icon.
3. Now look for “Reset Settings” options and click on it.
Once done, go back to the Home Screen and start the camera App again to use it.
Part 7: How to fix Camera Failed error by Factory Reset?
Lastly, if the above-mentioned techniques do not help you in fixing the camera failed error, you can consider performing a Factory Reset. Note: This method will delete all your saved data so it is advised to backup before you start the process.
Here are the steps to factory reset your device to fix “Warning: Camera Failed” Error:
1. Start by visiting “Settings” on your Motorola Edge+ (2023) device on which the camera has failed.
2. Now from the list of options before you, select “Backup and reset” and move ahead.
3. Now you must first select “Factory data reset” and then tap on “Reset Device” as shown in the screenshot below.
4. Finally, you have to click on “Erase Everything” and wait for the Motorola Edge+ (2023) device to reboot itself.
Note: You will have to set up your Motorola Edge+ (2023) device from scratch once it is reset, however, that is a small price to pay to fix your Camera App.
Warning: Camera Failed error is not a rare phenomenon and many users experience it on daily basis. So, there is no need to panic, All you need to do is carefully follow the instructions given above and repair your Camera App yourself. You do not need to seek any technical assistance for the same as the camera failed issue is not difficult to deal with. So go ahead and try these tricks to enjoy using the Camera App on your Motorola Edge+ (2023) devices.
Troubleshooting Guide: How to Fix an Unresponsive Motorola Edge+ (2023) Screen
Smart devices have become an integral part of our lives, and Motorola Edge+ (2023) phones are increasingly popular due to their advanced features and affordable prices. These phones offer numerous benefits, including high-quality cameras, fast processors, long-lasting batteries, and sleek designs.
However, like any other electronic device, Motorola Edge+ (2023) phones can sometimes encounter issues that may impede their functionality. One common problem that users face is an unresponsive screen, which can be frustrating and disruptive to daily activities.
This article will discuss some valuable solutions for dealing with Motorola Edge+ (2023) phone screen unresponsiveness. We will provide step-by-step instructions for troubleshooting and getting your phone back in working order. Whether you’re a novice or an experienced user, these tips and tricks will help you navigate this problem and get back to using your phone without any issues. So, let’s dive in and explore how to fix a Motorola Edge+ (2023) phone with an unresponsive screen.
What causes the Motorola Edge+ (2023) Screen unresponsive?
The Motorola Edge+ (2023) screen may become unresponsive due to various reasons. Here are some common situations and their possible causes:
During Use/Gaming: The screen may become unresponsive due to overheating when using or gaming on a Motorola Edge+ (2023) phone. This can be caused by running too many apps simultaneously or playing games for an extended period, especially on models such as the Motorola Edge+ (2023) 9 Pro, which generates much heat during gaming.
**No Response When Touching the Screen:**Sometimes, the Motorola Edge+ (2023) screen may not respond when touched due to a faulty touch screen or display. This can happen due to physical damage or a manufacturing defect. Some Motorola Edge+ (2023) Nord 2 users have reported this issue.
After Dropping the Phone: If a Motorola Edge+ (2023) phone has been dropped, the screen may become unresponsive due to physical damage or a loose connection. This can happen to any model, including the Motorola Edge+ (2023).
Overheating, physical damage, and manufacturing defects are some common causes of Motorola Edge+ (2023) screen unresponsiveness, which may occur during use/gaming, no response when touching the screen, or after dropping the phone.
The common solutions to solve a Motorola Edge+ (2023) Screen unresponsive
Here are the three most common solutions to deal with phone screens being unresponsive, regardless of the brand:
Restart the Motorola Edge+ (2023) device
Restarting the Motorola Edge+ (2023) device is a simple and quick solution to an unresponsive phone screen. To restart the phone, press and hold the power button until the screen turns off, then press and hold the power button again to turn the phone back on.
Check the Charging Port and Battery
Sometimes, an unresponsive screen can be caused by a dead battery or a faulty charging port. To check for these issues:
Step 1: Plug the phone into a charger and wait for at least 30 minutes to see if the battery charges.
Step 2: Try a different charger or cable to see if the issue is with the charging accessories.
Contact the Pros
If the above solutions don’t work, contacting a professional is best. A trained technician can diagnose and fix the problem. Contact the phone manufacturer or an authorized repair center to get help with your phone.
For different Motorola Edge+ (2023) models, there may be additional solutions to consider:
Check the Phone’s Temperature
Sometimes, a Motorola Edge+ (2023) phone’s screen, specifically Motorola Edge+ (2023) 8 Pro, may become unresponsive due to overheating. To check the phone’s temperature:
Step 1: Go to Settings > Battery > Battery Temperature.
Step 2: If the phone is overheating, let it cool down before using it again.
Reset to Factory Settings
A factory reset may help fix the problem if none of the above solutions work. Note that this will erase all data and settings on the phone, so be sure to back up your data before resetting. To reset the phone:
Step 1: Go to Settings > Additional Settings > Backup and Reset > Erase All Data.
Step 2: Follow the on-screen instructions to reset the phone.
Replace a New Screen
If the phone’s screen is physically damaged or cracked, it may need to be replaced. To replace the screen:
- Contact a professional repair center or the manufacturer for replacement parts and installation.
How to avoid Motorola Edge+ (2023) Screen being unresponsive?
To avoid Motorola Edge+ (2023) screen being unresponsive, here are some suggestions based on the possible causes:
Check Software Updates on Time
Make sure to regularly check for and install software updates on your Motorola Edge+ (2023) phone. These updates often include bug fixes and security patches that can help prevent issues like overheating and screen unresponsiveness.
Check Hardware from Time to Time
Regularly inspect your phone’s hardware components such as charging ports, battery, and screen for any signs of damage or wear and tear. If you notice any issues, get them fixed promptly to prevent them from causing further damage.
Avoid extreme temperatures
Keep your Motorola Edge+ (2023) device in a temperature-controlled environment. High temperatures can cause the screen to become unresponsive, and low temperatures can cause it to freeze.
Keep the screen clean
Dirt and debris on the screen can cause it to become unresponsive. Use a microfiber cloth to clean the screen regularly.
Reduce the number of running apps
Running too many apps at once can overload the system and cause the screen to become unresponsive. Close any apps you’re not using to free up system resources.
Use Wondershare Dr.Fone to Repair or Manage Your Data
Wondershare Dr.Fone is a helpful tool that can help manage and repair your phone’s data. It can be used to back up your data, transfer files between devices, and even fix issues like an unresponsive screen. Dr.Fone has the DF13 version to be launched, which includes more features to help manage your phone’s data effectively.
By following these suggestions, you can help prevent screen unresponsiveness on your Motorola Edge+ (2023) phone. Download Dr.Fone at https://drfone.wondershare.com/ to manage your phone’s data effectively and fix any issues that may arise.
safe & secure
Conclusion
Motorola Edge+ (2023) phones offer numerous benefits, including high-quality cameras, fast processors, long-lasting batteries, and sleek designs. However, like any other electronic device, Motorola Edge+ (2023) phones can sometimes encounter issues, such as an unresponsive screen. The causes of an unresponsive screen may include overheating, physical damage, and manufacturing defects.
To deal with an unresponsive screen, users can try restarting the Motorola Edge+ (2023) device, checking the charging port and battery, or contacting a professional. Additional solutions for specific Motorola Edge+ (2023) models include checking the phone’s temperature, resetting to factory settings, or replacing a new screen. To avoid an unresponsive screen, users can check software updates on time, inspect the phone’s hardware, avoid extreme temperatures, keep the screen clean, and reduce the number of running apps. Dr.Fone is a helpful tool that can help manage and repair your phone’s data.
Android Safe Mode - How to Turn off Safe Mode on Motorola Edge+ (2023)?
Safe mode on Android is very useful to get rid of dangerous apps and malware. This allows the user to perform a uninstall of the crashed or malicious apps by putting safe mode on Android. Now the question is how to remove safe mode? In this article, we have discussed in detail how to get out of safe mode and also discussed some frequently asked questions. Keep reading this article.
Part 1: How to turn off safe mode on Android?
This is very important to turn off the safe mode after you put the safe mode on Android. Your mobile performance is limited in this mode. So you have to turn off safe mode. For doing this, there are some methods. Try to apply them one by one. If you succeed, stop there. Else go to the next method.
Method 1: Restarting the Motorola Edge+ (2023) device
This is the easiest method to turn off the safe mode in Android. To use this method, follow the steps below.
Step 1 – Tap and hold the power button of your Motorola Edge+ (2023).
Step 2 – You could find the option “Restart”. Tap on it. (If you have only one option, move to the step no 2)
Step 3 – Now, your phone will boot up in some time and you can see the Motorola Edge+ (2023) device is no more on safe mode.
This method, if goes well, will turn off safe mode in Android from your device. IF not, move to the next method instead.
Method 2: Do a soft reset:
The soft reset is very easy to perform. It won’t delete any of your personal files etc. Besides, it clears all the temp files and unnecessary data and recent apps so that you get a healthy device. This method is very good for turning off Safe mode on Android.
Step 1 – Tap and hold the power button.
Step 2 – Now, select “Power off” from the given option. This will make your device off.
Step 3 – Wait a few seconds and then turn it on again.
This time you can see your phone is no more in safe mode. Also, your junk files have been also removed. If you still find the Motorola Edge+ (2023) device is the safe mode, follow the next method.
Method 3: Break all power
This method is sometimes very helpful to turn off safe mode on android by disconnecting all the power as well as resetting the SIM card.
Step 1 – Take the back cover off from the Motorola Edge+ (2023) device and remove the battery. (Not all devices will give you this facility)
Step 2 – Take out the SIM card.
Step 3 – Reinsert the SIM card and insert the battery again.
Step 4 – Turn the Motorola Edge+ (2023) device on by tapping and holding the power button.
Now, you can see your device is out of safe mode. If you still find your device in Safe mode, see the next method.
Method 4: Wipe the cache of the Motorola Edge+ (2023) device.
The cache of the Motorola Edge+ (2023) device sometimes creates an obstacle in overcoming the safe mode on Android. To solve this issue, follow the steps below.
Step 1 – Turn on your device in safe mode. It can generally be done by tapping the home, power, and volume up button on Android device. If this combination is not working for you, search the internet with your device model number.
Step 2 – Now you can find the recovery mode screen. Navigate to the “Wipe cache” option with the volume up and down button and select the option by tapping the power button.
Step 3 – Now follow on-screen instruction and your device will be rebooted.
After successful completion of this method, your device should no longer be in safe mode. If the problem still persists, the only solution is to do a factory reset. This will erase all the data from your device. So take backup of your internal storage.
Method 5: Factory data reset
To factory data reset, you have to follow the below steps.
Step 1 – Enter in the recovery mode by following the steps mentioned earlier.
Step 2 – Now select “Factory data reset” from the given options.
Step 3 – Now, follow the on-screen instructions and your device will be factory reset.
After this method, you can successfully get rid of the safe mode on Android. Restore your data from the backup you created.
Watch the video below to turn off safe mode on your phone:
Part 2: How to put the phone in safe mode?
If some apps or programs create a problem on your device, the solution is safe mode. Safe mode allows you to uninstall the app or the program out of your device safely. So, safe mode on Android is quite useful sometimes. Let’s have a look at how to turn on safe mode in Android.
Before this, remember to take a backup of your Motorola Edge+ (2023). We recommend you to use the Dr.Fone - Phone Backup (Android). This tool is the best in its class to provide users with a very easy-to-use user interface yet powerful solution.
Dr.Fone - Phone Backup (Android)_
Flexibly Backup and Restore Android Data
- Selectively backup Android data to the computer with one click.
- Preview and restore the backup to any Android devices.
- Supports 8000+ Android devices.
- There is no data lost during backup, export, or restore.
Always remember to use this tool before you enter in the safe mode as you never know what will happen next and you might end up with factory resetting. This, as the result, will erase all your valuable data. So always perform backup data before you proceed.
To enter the safe mode, follow the instructions below.
Step 1 – First of all, long press the power button and let the Power options appear.
Step 2 – Now, long press on the “Power off” option. This will instantly ask you if you want to reboot into safe mode. Select the option and your device will reboot in safe mode.
If you are using Android version 4.2 or earlier, turn off the Motorola Edge+ (2023) device and turn it on the back by tapping the power button. When the logo appears, tap and hold the volume down button. This will allow the Motorola Edge+ (2023) device to boot in safe mode.
Follow these steps carefully and now you can see a “Safe Mode” written at the corner of your device. This will confirm that you have successfully entered in Safe mode on Android.
Part 3: Safe mode on Android FAQs
In this section, we’ll discuss some frequently asked questions about the safe mode. Some users have many questions regarding the safe mode. Here we’ll try to cover some of them.
1. Why is My Motorola Edge+ (2023) on safe mode?
This is a very common question around the world. For many Android device users, it’s quite common to see your phone in safe mode suddenly. Android is a secure platform and if your device sees any threat from your recently installed apps or any programs that want to harm your device; it would go into safe mode automatically. Sometimes, you might accidentally perform the steps discussed in part 2 and boot your device in safe mode.
2. Safe mode won’t turn off on My Motorola Edge+ (2023)
For the solution to remove safe mode from your device you must follow the step-by-step methods as mentioned in part 1. This will surely take your device out of the safe mode.
The safe mode is a very useful program for any Android device. But it limits the programs of Android and you must remove safe mode after uninstalling the harmful app. This article showed you how to turn off safe mode easily.
Also read:
- 2024 Approved Premier Content Creators Colloquy
- 2024 Approved Premium Matchmakers 15 Perfect Gear Compatible with GoPro
- Can Life360 Track Or See Text Messages? What Can You Do with Life360 On Sony Xperia 10 V? | Dr.fone
- Effortless Fixes to the Problem of Unresponsive GeForce Experience Interface
- How To Fake GPS On Apple iPhone 11 Pro For Mobile Legends? | Dr.fone
- How to Quickly Fix Bluetooth Not Working on Xiaomi Redmi 13C | Dr.fone
- In 2024, Efficient Tricks to Scramble YouTube Playlists (PC/Phone/TV)
- In 2024, Will the iPogo Get You Banned and How to Solve It On Apple iPhone 15 Plus | Dr.fone
- Ottieni La Conversione Gratuita Da OGG Ad AAC Online Con Movavi - Scopri Le Opzioni Rapide per I Tuoi File Multimediali
- Quick Fixes for Why Is My Oppo Reno 10 5G Black and White | Dr.fone
- Restore Missing App Icon on Tecno Phantom V Fold Step-by-Step Solutions | Dr.fone
- Samsung Galaxy A05 Not Connecting to Wi-Fi? 12 Quick Ways to Fix | Dr.fone
- Simple Solutions to Fix Android SystemUI Has Stopped Error For Vivo Y200 | Dr.fone
- Transform Your DVDs: Top 3 Methods for Streaming and Televisual Viewing
- Title: Solved Warning Camera Failed on Motorola Edge+ (2023) | Dr.fone
- Author: Abel
- Created at : 2024-10-05 21:46:59
- Updated at : 2024-10-06 18:40:22
- Link: https://fix-guide.techidaily.com/solved-warning-camera-failed-on-motorola-edgeplus-2023-drfone-by-drfone-fix-android-problems-fix-android-problems/
- License: This work is licensed under CC BY-NC-SA 4.0.