[Solved] Warning: Camera Failed on Realme C53

In this article, you will learn why camera fails on Realme C53 devices, how to make camera work again, as well as a system repair tool to fix this issue in few clicks.

Realme C53 devices are one of the best Android devices available in the market and their users are always satisfied with their features. However, it is a recent observation that many Realme C53 users complain about Realme C53 camera failed error while using the camera App on the Realme C53 device. It is a strange error and pops up suddenly with only one option to tap on, i.e., “OK”

The error message reads as follows: “Warning: Camera Failed”.

Once you click on “OK” the app shuts down abruptly and your Realme C53 camera is failed. We understand this is not a very pleasing situation, thus, here are ways to tackle the camera failed Realme C53 issue. Let us now move ahead and find out why exactly you experience Warning: Camera Failed error and how to fix it.

Part 1: Why Realme C53 phone has Warning: Camera Failed error?

We are all aware that no device runs smoothly, without any glitches. We also know that there is a cause behind every problem. Listed below are a few reasons behind camera failed error, especially on Realme C53 devices:

1. If you have recently updated your OS version, there are chances that certain bugs are preventing the camera App from functioning normally. Also, if the update is interrupted and not downloaded completely, certain apps may suffer.
2. There are chances of your internal storage being cluttered with unwanted Apps and files leaving no space for the camera App to save its data and work smoothly.
3. If you haven’t cleared camera Cache and Data, the chances of the App to get clogged up increase tremendously which disrupt its working.
4. Warning: Camera Failed error can also be a direct outcome of a change in the system settings or the Realme C53 device’s internal settings.
5. Finally, if you tamper a lot with the camera settings and do not update the App whenever it is available, Realme C53 Camera App will not be efficient.

There might be much more reasons for the camera failed error, but these are the most obvious ones. Now let us now move on to troubleshooting the problem.

Part 2: How to fix Realme C53 Camera Failed in One Click?

If you are experiencing some kind of issues in your Realme C53s such as Realme C53 camera failed, the Realme C53 device stopped working, black screen, play store not working, etc. There is a special software is designed for such kind of issues in Android devices, i.e. dr. fone. The tool enables the users to fix various kinds of issues in the Realme C53 devices and perform a complete system repair so the Realme C53 device starts working normally.

Dr.Fone - System Repair (Android)

One-click solution to fix camera failed on Realme C53 devices

• The tool has a one-click operation which makes it super easy to use.
• You don’t need any technical skills expertise to operate the software.
• The software supports all the Realme C53 devices including the latest and older ones.
• The software can fix the “warning camera failed”, the app is crashing, failed update, etc.

4,616,396 people have downloaded it

Note: You have to remember that the system repair may erase all the Realme C53 device data. So, create a backup of your Realme C53 data first and then try fixing the Realme C53 phone.

Follow the steps given below and fix the camera failed error:

Step 1. Download the software on your computer and launch it. Connect your device and select the System Repair option from the main interface. In the next screen, select Android Repair module.

Step 2. You will have to provide the Realme C53 device details accurately to ensure that the software provides a precise firmware package to be downloaded. Enter brand, name, model, country, and carrier of your device and agree to the terms and condition.

Step 3. Now put your device in the download mode. The software will provide you with a guide to put the phone in download mode to begin the downloading process.

Step 4. As soon as the firmware is downloaded, the software will automatically initiate the repair process. You will be able to see the ongoing repair.

When the software is done repairing the system, you will be notified. Thus, the Camera failed Realme C53 error in your phone will be fixed.

Part 3: How to fix Camera Failed error by clearing camera data?

Has anyone ever informed you that it is absolutely necessary to keep clearing camera data every once in a while? Yes, since it deletes all unnecessary data stored in respect of the App and no, it does not mean that all your photos and videos will get deleted. Just follow the steps given below to clear camera data:

1. First, visit “Settings’” on your Realme C53 device and select “Apps” or Application Manager”.

2. Now a list of all Apps will appear before you. Keep scrolling down until your find “Camera”.

Tap on “Camera” to open the “Camera Info” screen and once you are there, hit “Clear Data” option as shown below.

That’s all, now return to the Home Screen and access the camera again. Hopefully, it will work now.

Part 4: How to fix Camera Failed error by removing third-party Apps?

Another tip to fix Realme C53 camera failed error is by deleting a few unwanted third-party Apps (recently installed) to free some space in the Realme C53 device’s internal storage. It is essential to create and keep storage space for the camera App to function smoothly and allow it to store its data as well. Also, if this issue only happens recently, it might be some newly installed Apps causing some glitches with the camera.

Simply, follow the instructions given below to remove Apps from Realme C53 Devices:

1. Click on the “Settings” icon on the Home Screen and from the options before you, select “Apps”/ “Application Manager”.

2. You will see that a list of downloaded and built-in Apps will open up before you as follows.

3. Now, once you select the App you want to uninstall, the App Info screen will appear. Tap on “Uninstall” option and then tap on “Uninstall” again on the pop-up message.

The App will be removed immediately and its icon will disappear from the Home Screen and you will notice an increase in the storage capacity of your device.

Part 5: How to fix Camera Failed error by wiping Cache Partition?

This method might seem tedious and time-consuming and you may also lose your data and essential settings. However, wiping the Cache Partition only cleans your device system internally and gets rid off any unwanted and trouble making elements causing Warning: Camera Failed error. Follow the step-by-step guide given below to clean Cache Partition smoothly:

1. Firstly, switch off the Realme C53 device by pressing the power button and tapping on “Power Off” as shown in the screenshot below. Then wait for the lit screen to turn off completely before proceeding further.

2. Now, press and hold the power on/off, home and volume up button simultaneously. Your device will now vibrate. This a signal to let go of the power button (only).

3. Once the Recovery Screen appears, leave all buttons and use the volume down key till you reach “Wipe Cache Partition”.

4. Now, to select the option to use the power on/off button and wait for the process to get over. Once this done, tap on “Reboot system now” and see that your device restarts normally.

You may try to use the camera app once the process completes.

Part 6: How to fix Camera Failed error by Reset Settings?

Resetting the camera settings solves the problem 9 out of 10 times and thus is worth a try.

1. To reset, first, launch the Camera App by tapping on its icon.

2. Then go to Camera “Settings” by tapping on the circular gear like icon.

3. Now look for “Reset Settings” options and click on it.

Once done, go back to the Home Screen and start the camera App again to use it.

Part 7: How to fix Camera Failed error by Factory Reset?

Lastly, if the above-mentioned techniques do not help you in fixing the camera failed error, you can consider performing a Factory Reset. Note: This method will delete all your saved data so it is advised to backup before you start the process.

Here are the steps to factory reset your device to fix “Warning: Camera Failed” Error:

1. Start by visiting “Settings” on your Realme C53 device on which the camera has failed.

2. Now from the list of options before you, select “Backup and reset” and move ahead.

3. Now you must first select “Factory data reset” and then tap on “Reset Device” as shown in the screenshot below.

4. Finally, you have to click on “Erase Everything” and wait for the Realme C53 device to reboot itself.

Note: You will have to set up your Realme C53 device from scratch once it is reset, however, that is a small price to pay to fix your Camera App.

Warning: Camera Failed error is not a rare phenomenon and many users experience it on daily basis. So, there is no need to panic, All you need to do is carefully follow the instructions given above and repair your Camera App yourself. You do not need to seek any technical assistance for the same as the camera failed issue is not difficult to deal with. So go ahead and try these tricks to enjoy using the Camera App on your Realme C53 devices.

How to Fix Error 495 While Download/Updating Android Apps On Realme C53

Error 495 is a common error that occurs while downloading or updating apps from Google Play Store. This error is usually caused by a problem with the Google Play Store, and it can be fixed by clearing the cache and data of the Google Play Store app. If you are experiencing this error, follow the steps below to fix it.

In this article, you will learn why the Android error 495 pops up, possible solutions to bypass, as well as a dedicated repair tool to radically fix error 495.

We always like to explore every new feature or the features that already exist on our devices. We have a tendency to be the master of our device and want to know every bit of the handset. Unexpected errors ruin that experience and it is just frustrating to experience these errors. And the worst part is that we have no idea where we are wrong or what we did that led to the error. Same is the case with the error 495 which occurs due to downloading or updating of Android Apps. You may have spent countless hours on the internet to find the right solution for error code 495 but even after following many of the most guaranteed steps sometimes the error still doesn’t go away.

However, this article will provide you various methods to get rid of the Error 495 play store problem that you face and you will not have to depend on any other sources for your solution.

Reasons for Google play error 495

Android Apps are most commonly downloaded from the Google Play Store with the help of Wi-Fi or Cellular Data. One may come across many types of errors. Mostly the errors come in during the download or update or installing time. Error 495 occurs when the user isn’t being able to download or install an app over Wi-Fi, but the user is able to do the same thing over cellular data.

Technically speaking, the issue is caused when the connection to the Google Play servers, where the app is hosted, times out. Which is unable to resolve by itself.

Also, there could be another reason that it cannot sync with the servers.

Now that we know the possible reasons for the error 495, let us also know how to get rid of it in the sections below.

Solution 1: One Click to Fix error 495 by Android Repair

Tried several methods to make the error 495 disappear, but nothing works? Well, many people have experienced the same frustration. The root cause is that something is wrong with the Android system. You need to have your Android system repaired to fix error 495 in this situation.

Note: Having your Android system repaired may lose existing data on your Android. Backup the data on your Android before the Android repair.

Dr.Fone - System Repair (Android)

Best tool for fundamental Android repair in one click

• Fixes all Android system issues like error 495, system UI not working, etc.
• One click for Android repair. No special technics needed.
• Supports all the new Realme C53 devices like Galaxy Note 8, S8, S9, etc.
• Step-by-step on-screen instructions provided to fix error 495 without any hassle.

3,390,486 people have downloaded it

With Dr.Fone - System Repair (Android) , you can easily fix error 495 in few steps. Here is how:

1. Download, install, and launch Dr.Fone - System Repair (Android). Connect your Android to your computer with a USB cable.

3. Select the option “Repair” > “Android Repair”, and click “Start”.

5. Select the Realme C53 device information like brand, name, model, etc., and confirm your selection by typing in “000000”.

7. Press the stated keys to boot your Android in download mode to download the firmware as instructed.

9. After the firmware is downloaded, the program will automatically start to repair your Android.

Solution 2: Clear the Google Service Framework cache to Fix error 495

Step 1:

Go to the “settings” of your device. Once the series of sections comes up, tap on the “APPS” section.

Step 2:

Click on ‘All Apps’ or ‘Swipe to All’ and the open the section named “Google Services Framework App”

.

STEP 3:

Open “App Details” and the screen shown in the image should come up on your device. As shown in the image, follow the three steps. First, tap on “Force Stop” and then second, tap on the “Clear Data” option and finally go ahead and tap on the “Clear Cache” option.

Following the above steps should solve your problem of Google Play Error 495. And you can enjoy back to using the apps which you couldn’t download or update due to the Error 495.

Solution 3: Reset App Preference in Google play Store to Fix error 495

STEP 1:

Go to the settings section in your device. It will be differently placed for different devices and different users.

STEP 2:

Once the Settings section is open. A lot of further sections will pop up. No find the section named “Application Manager” or “Apps”. After locating it, tap on that section.

STEP 3:

Now go ahead and tap or slide to a section named “ALL”.

STEP 4:

After reaching the “ALL” section tap the touch button to open menu/properties and choose an option named “Reset Apps” or “Reset App Preferences”.

There’s no need to be alarmed because on clicking the reset option, the apps won’t be deleted but it is only going to re-set them. And hence solving the Error 495 created in the Google Play.

Solution 4: Fix Error Code 495 by installing a VPN app

The Error code 495 can be easily removed in another interesting way too. On downloading a Virtual Private Network (VPN) and then operating the play store automatically solves the error 495.

STEP 1:

Install Hideman VPN (using any other VPN will also make it work) from Google Play store. (If the error persists for this app too then download it from a different app store or by using a third-party store).

STEP 2:

Now open the app and select the United States as the country of connection and press the option named Connect.

STEP 3:

Open Google Play Store and Download any app without the Error Code 495 coming in and bothering.

This fix will work for most of the Google Play Errors and not just only The Error Code 495.

Solution 5: Remove your Google Account & Reconfigure it to fix error 495

Removing the Google account and re-configuring it is a very common method adopted to get rid of the Error 495. Adopt the following steps to complete this method.

STEP 1:

Go to the “Settings” section of your device. Like it was mentioned before, different devices and different users will have the placement of the settings section in a different place.

STEP 2:

Go to the accounts section in the settings tab.

STEP 3:

In the accounts section tap on the Google Account part

STEP 4:

Inside The Google section, there’ll be an option called “Remove Account”. Tap on that section, to remove your google account.

STEP 5:

Now go ahead and re-enter/ re-register your Google account and check if the Error 495 still persists.

Now you have completed all the steps and your problem should be solved.

Solution 6: Fix error code 495 by Removing your Google Play Store Data & Cache

One of the best and most accurate methods in the series of various steps in eradicating the Error Code 495 in Google Play Store is by removing the Google play Store Data and Cache. In order to do so follow the steps mentioned below. After following the steps it is guaranteed that the Error code 495 will be done with and you won’t experience any such problems in the future.

STEP 1:

Go to the “Settings” section into your mobile device. The settings can be accessed by scrolling down and pulling down the drop-down menu and most likely the settings app will be on the top-right corner. Otherwise, it will be found after opening the app drawer.

STEP 2:

Once after opening the settings section, select the “Installed apps” or the “Apps” section.

STEP 3:

Find the “Google Play Store” section and select that too.

STEP 4:

Tap on the “Clear data” & “Clear Cache”.

Doing the above steps will clear your caches of the Google Play Store. Now you have a new google Play store.

Hence in this article, we got to know about the error 495 and the possible solutions to it as well. Also, this article explains how Error code 495 can be removed by 5 different ways. These are the best ways by which you can remove or get rid of the Error Code 495. In case one of the method fails, use the other one to rectify this recurring error 495 on your Realme C53.

How to Fix Android.Process.Media Has Stopped on Realme C53

Like any other technological system, Android is not without its fair share of problems. One of the most common issues that Android users face is the android.process.media error. If you have encountered this problem lately, you don’t need to worry, this article will clearly explain what exactly causes this error and how to fix it safely.

Part 1. Why this error pops up?

There are several reasons why this error can occur repeatedly and it is worth noting the various reasons why this happens so that you can avoid the problem in the future. Some of the most common ones include:

• 1. Moving from one custom ROM to another can cause this error to occur
• 2. A failed firmware upgrade may also be to blame
• 3. A virus attack can also result in this error among many others
• 4. Restoring apps via a Titanium backup is also a major cause
• 5. Failure of certain apps such as the download manager and the media storage

Part 2. Back up your Android Data First

It is always a good idea to back up your data especially before embarking on any attempt to fix any problem with your device. This way you will always have your data with you just in case something goes wrong and you lose all your data. Wondershare Dr.Fone will help you easily back up your Realme C53. The application will allow you to back up your device with a few clicks and you can restore what you want from your backup .

Wondershare Dr.Fone

Flexibly Back up and Restore Android Data

• One-click to back up Android data to the computer.
• Preview and selectively restore the backup to any Android device.
• Supports 8000+ Android devices.
• There is no data lost during backup, export, or restore.

4,503,800 people have downloaded it

Follow the steps below to learn how to back up your phone in steps.

Step 1. Download, install, and run the program

Click the “Start Download” button above to get the software installed on your computer. Then run it. The primary window of the software looks like below.

Step 2. Connect your device

Then connect your Realme C53 to the computer and make sure that it can be recognized by your computer. Then click on “My Backup” on Dr.Fone.

Step 3. Begin to backup

When your device is displayed on the window of the program, click “Back Up Now “ to begin. The rest will be done by the program.

safe & secure

Part 3. How to Fix “Android. Process. Media” Error

With a full backup of your Realme C53, you can now embark on a mission to fix the error. There are several methods to clear this error. We have outlined three of the most effective solutions here.

Method 1: Ensure app and system updates

Updates often include patches for known issues and vulnerabilities. Ensuring that both apps and the system are up to date can resolve many potential problems.

Step 1: Visit the Google Play Store to check for available app updates.

Step 2: In “Settings,” go to “System” > “Software Update” to check for system updates.

Method 2: Reset app preferences

App preference settings might sometimes lead to conflicts or anomalies. Resetting these settings can revert apps to their default state, resolving potential issues.

Step 1: Go to “Settings” on your device.

Step 2: Access “Apps.”

Step 3: Tap the menu icon in the upper-right corner and select “Reset App Preferences.”

Method 3: Clear the cache and data on your device

Step 1: Go to Settings> Applications> Manage Applications and find the Google Services framework.

Step 2: Next, find Google Play from the same Manage Applications page.

Step 3: Tap on it and then Tap on clear cache.

Step 4: Press the back button to go back to the Google Services framework and then choose Force stop > clear cache > OK

Step 5: Next you need to open Google Play and when presented with an error, click OK

Step 6: Turn off the Realme C53 device and then turn it back on. Go to the Google Services framework again and turn it on to see if the issue has been resolved.

Method 4: Check Google Sync & Media Storage settings

Step 1: Go to Settings > Accounts and Personal> Google Sync and uncheck all the checkboxes to stop the Google Synchronization.

Step 2: Disable and Clear all Media Storage data by going to Settings> Apps> All Apps. Find the Media Storage> Clear Data> Disable

Step 3: Use the same method as above to clear the Download Manager data

Step 4: Turn off your device and then turn it on

This Should clear the error message for good.

Method 5: Boot your device into safe mode

Safe mode can temporarily disable third-party apps, allowing only core system apps. This detects if a third-party app causes the “Android process media keeps stopping” error. If the problem disappears in safe mode, a third-party app might be the cause. Uninstalling it can restore normal function. If the problem persists in safe mode, a deeper system issue might exist, needing further investigation or support.

Method 6: Fix the error by using a dedicated repair tool

Dr.Fone - System Repair (Android)

Fix Android process media has stopped issue in one click

• Fix all Android system issues like black screen of death, won’t turn on, system UI not working, etc.
• Industry’s 1st tool for one-click Android repair. Without any data loss.
• Supports all the new Realme C53 devices like Galaxy S8, S9, S22, etc.
• Step-by-step instructions provided. No technical skills required.

4,989,253 people have downloaded it

Step 1. Connect your Realme C53

After launching Dr.Fone, click on “System Repair” from the main window.

Then connect your Realme C53 with the correct cable and choose “Android” > click “Start”.

In the Realme C53 device information interface, remember to select the correct information. Then confirm the warning and click “Next”.

To confirm the Android repair may erase all data on your device, you need to type in “000000” to proceed.

Step 2. Repair your Realme C53 in Download mode.

Read and follow the guide here to boot your Realme C53 in Download mode.

Then click “Next” to start downloading the firmware.

It may take a while, so you could have a cup of coffee to wait for the repair process completed.

safe & secure

Method 7: Factory Reset your device

If the above steps fail, you might need to perform a factory reset. A factory reset restores the Realme C53 device to its initial state, which can eliminate many problems, but it will also erase all data. Ensure you back up your important data before proceeding.

Method 8: Seek Manufacturer Support

If the problem persists after trying the above steps, it could be related to specific device or software issues. It’s advisable to contact your device manufacturer’s support team for more detailed guidance and assistance.

It is our hope that when faced with this fairly common error, you will not panic. This is a fairly mild issue that can easily be fixed as we have seen above.

safe & secure