[Solved] Warning: Camera Failed on Realme GT 3

In this article, you will learn why camera fails on Realme GT 3 devices, how to make camera work again, as well as a system repair tool to fix this issue in few clicks.

Realme GT 3 devices are one of the best Android devices available in the market and their users are always satisfied with their features. However, it is a recent observation that many Realme GT 3 users complain about Realme GT 3 camera failed error while using the camera App on the Realme GT 3 device. It is a strange error and pops up suddenly with only one option to tap on, i.e., “OK”

The error message reads as follows: “Warning: Camera Failed”.

Once you click on “OK” the app shuts down abruptly and your Realme GT 3 camera is failed. We understand this is not a very pleasing situation, thus, here are ways to tackle the camera failed Realme GT 3 issue. Let us now move ahead and find out why exactly you experience Warning: Camera Failed error and how to fix it.

Part 1: Why Realme GT 3 phone has Warning: Camera Failed error?

We are all aware that no device runs smoothly, without any glitches. We also know that there is a cause behind every problem. Listed below are a few reasons behind camera failed error, especially on Realme GT 3 devices:

1. If you have recently updated your OS version, there are chances that certain bugs are preventing the camera App from functioning normally. Also, if the update is interrupted and not downloaded completely, certain apps may suffer.
2. There are chances of your internal storage being cluttered with unwanted Apps and files leaving no space for the camera App to save its data and work smoothly.
3. If you haven’t cleared camera Cache and Data, the chances of the App to get clogged up increase tremendously which disrupt its working.
4. Warning: Camera Failed error can also be a direct outcome of a change in the system settings or the Realme GT 3 device’s internal settings.
5. Finally, if you tamper a lot with the camera settings and do not update the App whenever it is available, Realme GT 3 Camera App will not be efficient.

There might be much more reasons for the camera failed error, but these are the most obvious ones. Now let us now move on to troubleshooting the problem.

Part 2: How to fix Realme GT 3 Camera Failed in One Click?

If you are experiencing some kind of issues in your Realme GT 3s such as Realme GT 3 camera failed, the Realme GT 3 device stopped working, black screen, play store not working, etc. There is a special software is designed for such kind of issues in Android devices, i.e. dr. fone. The tool enables the users to fix various kinds of issues in the Realme GT 3 devices and perform a complete system repair so the Realme GT 3 device starts working normally.

Dr.Fone - System Repair (Android)

One-click solution to fix camera failed on Realme GT 3 devices

• The tool has a one-click operation which makes it super easy to use.
• You don’t need any technical skills expertise to operate the software.
• The software supports all the Realme GT 3 devices including the latest and older ones.
• The software can fix the “warning camera failed”, the app is crashing, failed update, etc.

4,616,396 people have downloaded it

Note: You have to remember that the system repair may erase all the Realme GT 3 device data. So, create a backup of your Realme GT 3 data first and then try fixing the Realme GT 3 phone.

Follow the steps given below and fix the camera failed error:

Step 1. Download the software on your computer and launch it. Connect your device and select the System Repair option from the main interface. In the next screen, select Android Repair module.

Step 2. You will have to provide the Realme GT 3 device details accurately to ensure that the software provides a precise firmware package to be downloaded. Enter brand, name, model, country, and carrier of your device and agree to the terms and condition.

Step 3. Now put your device in the download mode. The software will provide you with a guide to put the phone in download mode to begin the downloading process.

Step 4. As soon as the firmware is downloaded, the software will automatically initiate the repair process. You will be able to see the ongoing repair.

When the software is done repairing the system, you will be notified. Thus, the Camera failed Realme GT 3 error in your phone will be fixed.

Part 3: How to fix Camera Failed error by clearing camera data?

Has anyone ever informed you that it is absolutely necessary to keep clearing camera data every once in a while? Yes, since it deletes all unnecessary data stored in respect of the App and no, it does not mean that all your photos and videos will get deleted. Just follow the steps given below to clear camera data:

1. First, visit “Settings’” on your Realme GT 3 device and select “Apps” or Application Manager”.

2. Now a list of all Apps will appear before you. Keep scrolling down until your find “Camera”.

Tap on “Camera” to open the “Camera Info” screen and once you are there, hit “Clear Data” option as shown below.

That’s all, now return to the Home Screen and access the camera again. Hopefully, it will work now.

Part 4: How to fix Camera Failed error by removing third-party Apps?

Another tip to fix Realme GT 3 camera failed error is by deleting a few unwanted third-party Apps (recently installed) to free some space in the Realme GT 3 device’s internal storage. It is essential to create and keep storage space for the camera App to function smoothly and allow it to store its data as well. Also, if this issue only happens recently, it might be some newly installed Apps causing some glitches with the camera.

Simply, follow the instructions given below to remove Apps from Realme GT 3 Devices:

1. Click on the “Settings” icon on the Home Screen and from the options before you, select “Apps”/ “Application Manager”.

2. You will see that a list of downloaded and built-in Apps will open up before you as follows.

3. Now, once you select the App you want to uninstall, the App Info screen will appear. Tap on “Uninstall” option and then tap on “Uninstall” again on the pop-up message.

The App will be removed immediately and its icon will disappear from the Home Screen and you will notice an increase in the storage capacity of your device.

Part 5: How to fix Camera Failed error by wiping Cache Partition?

This method might seem tedious and time-consuming and you may also lose your data and essential settings. However, wiping the Cache Partition only cleans your device system internally and gets rid off any unwanted and trouble making elements causing Warning: Camera Failed error. Follow the step-by-step guide given below to clean Cache Partition smoothly:

1. Firstly, switch off the Realme GT 3 device by pressing the power button and tapping on “Power Off” as shown in the screenshot below. Then wait for the lit screen to turn off completely before proceeding further.

2. Now, press and hold the power on/off, home and volume up button simultaneously. Your device will now vibrate. This a signal to let go of the power button (only).

3. Once the Recovery Screen appears, leave all buttons and use the volume down key till you reach “Wipe Cache Partition”.

4. Now, to select the option to use the power on/off button and wait for the process to get over. Once this done, tap on “Reboot system now” and see that your device restarts normally.

You may try to use the camera app once the process completes.

Part 6: How to fix Camera Failed error by Reset Settings?

Resetting the camera settings solves the problem 9 out of 10 times and thus is worth a try.

1. To reset, first, launch the Camera App by tapping on its icon.

2. Then go to Camera “Settings” by tapping on the circular gear like icon.

3. Now look for “Reset Settings” options and click on it.

Once done, go back to the Home Screen and start the camera App again to use it.

Part 7: How to fix Camera Failed error by Factory Reset?

Lastly, if the above-mentioned techniques do not help you in fixing the camera failed error, you can consider performing a Factory Reset. Note: This method will delete all your saved data so it is advised to backup before you start the process.

Here are the steps to factory reset your device to fix “Warning: Camera Failed” Error:

1. Start by visiting “Settings” on your Realme GT 3 device on which the camera has failed.

2. Now from the list of options before you, select “Backup and reset” and move ahead.

3. Now you must first select “Factory data reset” and then tap on “Reset Device” as shown in the screenshot below.

4. Finally, you have to click on “Erase Everything” and wait for the Realme GT 3 device to reboot itself.

Note: You will have to set up your Realme GT 3 device from scratch once it is reset, however, that is a small price to pay to fix your Camera App.

Warning: Camera Failed error is not a rare phenomenon and many users experience it on daily basis. So, there is no need to panic, All you need to do is carefully follow the instructions given above and repair your Camera App yourself. You do not need to seek any technical assistance for the same as the camera failed issue is not difficult to deal with. So go ahead and try these tricks to enjoy using the Camera App on your Realme GT 3 devices.

Fix Unfortunately Settings Has Stopped on Realme GT 3 Quickly

All of you, sooner or later, must have found the “Unfortunately Settings has stopped” error on your Realme GT 3. The problem can occur if the Settings keeps stopping or crashing. Many times, you may try to open the Settings but it doesn’t even open. Or possibly, it may freeze after getting opened thereby hampering the Realme GT 3 device’s performance.

Well! There can be a number of reasons why this thing happens. For instance, custom ROM installations, not enough space in the Realme GT 3 device or perhaps an outdated version of Android. If you are struggling with the same issue and want to know what to do when Android Settings is not responding, this post will help you. We have explained everything in detail along with the solutions. So, scroll down and get things sorted.

• Part 1: Clear the cache of Settings and Google Play Service
• Part 2: Clear the Android phone’s RAM and retry
• Part 3: Uninstall the Google update
• Part 4: Uninstall the custom ROM or re-flash the stock ROM
• Part 5: Wipe cache partition to restore Settings
• Part 6: Factory reset your Android
• Part 7: Check and update Android OS

Part 1: Clear the cache of Settings and Google Play Service

It is possible that the corrupted cache files are responsible for this error. Hence, as the first tip, we would like you to clear the Settings cache if that is what triggers the “Unfortunately Settings has stopped” issue. Clearing it would definitely make Settings run appropriately. And The steps to clear the cache of the Google Play Services app are similar. Here is how to clear the cache of Settings:

1. Open “Settings” on your Realme GT 3 and choose “Apps & Notifications”/”Apps”/”Application Manager” (the option may differ on different devices).
2. In the list of applications, look for “Settings” and open it.
3. Now, select “Storage” followed by “Clear Cache”.

Note: In some phones, the “Clear Cache” option may come after tapping on “Force Stop”. Therefore, go accordingly without getting confused.

Part 2: Clear the Android phone’s RAM and retry

As the next tip, we would like to suggest you clear your device’s RAM by ceasing the running apps in the background. RAM, if at the increased level, is responsible for the Realme GT 3 device’s freezing, poor performance, and most probably is the reason behind crashing Settings. Also, if the apps in the background keep running, they might conflict with the Settings and stop it to perform properly. Therefore clearing RAM is important when Android Settings is not responding. Here is how to do it.

1. Firstly, you need to go to the Recent apps screen. For this, long-press the Home key.
   Note: Please note that different devices have different ways to go to the Recent apps screen. Do it according to the Realme GT 3 device you own.
2. Now, swipe the apps and tap on the clear option. You will be able to notice the amount of RAM cleared

Part 3: Uninstall the Google update

Uninstalling Google Play Store updates has also responded well to many users. It has worked in the case of the “Unfortunately Settings has stopped” error. So, we would also like to suggest you use this tip if the others don’t work. Here are the steps to be followed for this.

1. Open “Settings” on your Android and tap on “Application manager” or “Apps” or “Application.
2. Now, head to all the apps and select “Google Play Store” from there.
3. Tap on “Uninstall Updates” and restart your device to check if the crashing Settings issue has been resolved.

Part 4: Uninstall the custom ROM or re-flash the stock ROM

Using a custom ROM on your device brings up this problem due to incompatibility or improper installation. Therefore, you should either uninstall the custom ROM or re-flash the stock ROM. in order to re-flash the stock ROM of your Realme GT 3, the best way would be Dr.Fone - System Repair (Android). It offers one-click functionality to flash stock ROM and that too with full security. Supporting all Realme GT 3 devices, it ranks among its counterparts when it comes to fixing crashing Phone app issues or any other Android system issue. It is loaded with the beneficial features which are discussed below.

Dr.Fone - System Repair (Android)

Android repair tool to fix “Unfortunately, Settings Has Stopped”

• You needn’t be a tech-savvy to use this
• Supports a wide range of Android devices easily, 1000+ being more precise
• One-click tool and supports any sort of Android system issue
• Higher success rate along with millions of trusted users
• Trustworthy and offers an extremely easy interface

4,635,310 people have downloaded it

How to fix crashing Settings using Dr.Fone - System Repair (Android)

Step 1: Download Tool

Visit the official website of Dr.Fone and download the toolbox from there. Go for the installation process and wait until the installation gets over. Launch it now and choose the “System Repair” tab from the main window.

Step 2: Get the Phone Connected

With the help of a USB cable, plug your Realme GT 3 into the PC. Upon proper connection, hit on the “Android Repair” option from the left panel.

Step 3: Feed Correct Information

In the next window, you need to fill in some necessary information like the name and model of the mobile device. Enter details like country and career. Check once and hit on “Next”.

Step 4: Enter Download Mode

Now, you need to take your device into Download mode. For this, you need to follow the onscreen instruction according to your device. Click “Next” and you will notice the firmware downloading progress on your screen.

Step 5: Repair the Issue

Once the firmware is completely downloaded, your Realme GT 3 will automatically start getting repaired. Stay there and you will receive a notification that the repair is done.

Part 5: Wipe cache partition to restore Settings

Like RAM, wiping cache is also vital so as to make the Realme GT 3 device’s operation smoother. And when you are getting the “Unfortunately Settings has stopped” error, it might be due to the collected cache. To remove it, you will need to enter the recovery mode. And the steps for recovery mode range from device to device. For instance, Realme GT 3 users have to press the “Home”, “Power” and “Volume Up” buttons. Similarly, HTC and LG device users are supposed to press the “Volume Down” and “Power” buttons. For Nexus, it is “Volume Up, Down” and Power key combinations. Therefore, before going further, make sure what device you own and enter the recovery mode according to it. Now, follow the detailed guide below to wipe the cache partition in order to fix crashing Settings.

1. Primarily, turn off the Realme GT 3 device and enter the recovery mode by pressing the respective key combinations.
2. You will notice a Recovery screen on your device.
3. On showing up the recovery screen, look for the “Wipe Cache partition” option and use the “Volume Down” and “Volume Up” buttons to scroll down and up respectively.
4. On reaching the required option, press the “Power” button to start wiping.
5. Once finished, click the reboot option and the Realme GT 3 device will be rebooted, fixing the issue hopefully.

Part 6: Factory reset your Android

You can also opt for Factory resetting your device to fix the issue of Settings keeps stopping. By removing everything from the Realme GT 3 device, it will make your device run properly. If you have important data on your device, please make sure to create a backup before taking action if you don’t want to lose it. The steps are as follows.

1. In the “Settings, go to “Backup and Reset”.
2. Tap on “Factory data reset” followed by “Reset device”.
3. Wait for the completion of the process and check if Settings is stopping or not after it gets rebooted.

Part 7: Check and update Android OS

A lot of times minor issues crop up due to the operating systems that get outdated. It is because the Realme GT 3 device needs to get updated from time-to-time for proper functioning otherwise it will not be able to match up with the fading technologies thereby coming up with issues like “Unfortunately Settings has stopped”. We recommend here you check for the available update and update your device. For this follow the guide below.

1. Go to “Settings” and tap “About Phone” on your device.
2. Now, hit on “System Update” and the Realme GT 3 device will look for any available update.
3. If there is any, go along with the prompts to install it and make your phone even smarter.

Conclusion

If your Realme GT 3 shows the “Unfortunately Settings has stopped” error, don’t worry. This problem can come from many things like old software or cache issues. You can try easy fixes like clearing cache or updating your system. Sometimes, removing custom ROMs might be needed.

For iOS users facing similar problems, we recommend using Dr.Fone-System Repair (iOS) . It’s known for fixing many iOS problems without losing any data. Remember, a well-working device is just a few steps away!

safe & secure

Fix Realme GT 3 Android System Webview Crash 2024 Issue

In recent months, the term “Android WebView crash 2023“ has become a common search term among Android users seeking solutions to these app crashes . The issue has been particularly prevalent on Realme GT 3 devices, but it has also affected users of other Android models.

Android WebView for Android apps allows you to see and interact with web pages without leaving your app. But lately, it’s been causing more headaches than it’s worth.

So, what’s going on with Realme GT 3 Android System WebView, and what can you do to fix its issues? Let’s take a look. This article will shed light on Realme GT 3 Android System WebView crashing apps, helping you understand what triggers them, how to identify them, and what you can do to prevent them from happening again.

Part 1: What Should We Know About Realme GT 3 Android System WebView Crashes?

This year, the term “Android WebView crash 2023“ has become a familiar and dreaded phrase. This issue has plagued Android users, causing app crashes, freezing , and frustration. But what exactly is Android WebView, and what triggers these apps to crash?

Android WebView is an integral component of Android apps, acting as the invisible engine that renders web content within these apps. It allows users to seamlessly browse websites, watch videos, and interact with web pages without switching to a separate browser. However, when WebView crashes, it disrupts this integrated experience, causing apps to malfunction.

Several signs can indicate an impending or ongoing Android WebView crash. These include:

• App Freezing

One of the earliest signs of an Realme GT 3 Android System WebView crash is the app freezing. The app may become unresponsive, refusing to respond to your taps or gestures.

• Unexpected App Closures

Another common sign is unexpected app closing. The app may shut down without warning, abruptly ending your activity. Realme GT 3 Android System WebView crashing apps can be disruptive if you are in the middle of a conversation, shopping online, or filling out an important form.

• Error Messages

Error messages can also provide valuable clues about the impending crash. These messages may appear as pop-ups or be displayed within the app itself.

• Slow Loading Times

Slow loading times can also be a sign of an impending crash. If webpages within the app take unusually long to load or images and other content appear pixelated or distorted, it could be a sign that Realme GT 3 Android System WebView is struggling to handle the workload.

But why does WebView crash Android smartphones? The answer involves several factors:

• Updates and Compatibility Issues

Updates are often intended to improve software stability and compatibility, but in some cases, they can introduce new bugs or compatibility issues that lead to crashes. It is particularly evident when app developers and WebView developers release updates that don’t fully align, causing conflicts.

• Insufficient Memory

Realme GT 3 Android System WebView requires a certain amount of memory to operate properly. If your device is running low on memory, it can cause Realme GT 3 Android System WebView to crash. It is more likely to happen on older devices with less RAM.

• Outdated Realme GT 3 Android System WebView

The WebView app is responsible for rendering web content within Android apps. Using an outdated version of WebView can introduce known bugs and security vulnerabilities that can cause crashes.

• Conflicts With Other Apps

WebView might crash if it conflicts with other resources or processes running on the Realme GT 3 device. It can happen if the Realme GT 3 device runs low on memory or other resource-intensive apps compete for system resources.

In the next section, you’ll explore potential solutions to keep your apps running smoothly.

Part 2: Android WebView Crashes? Here Are Quick and Proven Solutions

Now you’ve identified the signs and causes of Realme GT 3 Android System WebView crashing apps on your phone. While these issues can be frustrating, there are several quick and proven solutions to fix them.

Uninstall WebView Updates

If you’re experiencing apps crashing after a recent update, consider uninstalling those updates. This action can potentially revert to a more stable version of Realme GT 3 Android System WebView.

To do this on your Realme GT 3, navigate to Settings > Apps, then select Realme GT 3 Android System WebView. Tap the menu icon in the top right corner and tap Uninstall updates.

Update Android WebView

Regularly updating Realme GT 3 Android System WebView to the latest version is crucial for maintaining compatibility and addressing known bugs. Google releases updates to address these concerns, ensuring optimal performance and stability.

Check for available updates on Realme GT 3 devices by navigating to Settings > Apps. Then, select Realme GT 3 Android System WebView and tap App details in-store. If an update is available, tap Update to install it and restart your phone.

Update Google Chrome

Android WebView is closely tied to Google Chrome, and issues with Chrome can sometimes affect WebView functionality. As such, updating Chrome to the latest version can help address Android System and WebView forcibly closing your phone’s apps.

Open the Google Play Store and search for Google Chrome. If an update is available, tap Update to install it, then restart your device.

Clearing Cache and Data for Android WebView

Clearing the cache frees up phone storage and helps the app run more efficiently. To clear Realme GT 3 Android System WebView’s cache and data, go to Settings > Apps and select Realme GT 3 Android System WebView. Tap on Storage and tap Clear cache on the lower right corner of your screen.

Restart Device

A simple restart can often resolve temporary glitches or conflicts that might be causing Android WebView crashes. The specific steps to restart your phone will vary depending on your device type.

Check Internet Connection

A stable internet connection is essential for Realme GT 3 Android System WebView to render web content properly. If the internet connection is unstable or down, it can lead to crashes. Ensure you have a stable internet connection before using WebView-based apps.

Update Device Software

OS updates may introduce changes to the Realme GT 3 Android System WebView that make it more compatible with newer web standards and technologies. It can enhance the performance and stability of apps that rely on WebView for web content.

Check for available software updates by going to Settings > Software Update. If an update is required, tap on Download and install.

While problems like when the Android System WebView crashes Android phones are common, they don’t have to be a persistent problem for Realme GT 3 users. It’s also equally important to have effective solutions when app crashes occur. This is where Wondershare Dr.Fone steps in as a reliable and comprehensive solution for restoring app stability and overall phone performance.

Part 3: Restoring Apps and Phone Stability: A Step-by-Step Guide

Dr. Fone’s System Repair tool can help you resolve common Android scenarios, including Google Play Store malfunctions and persistent app crashes.

How To Use Dr.Fone for Realme GT 3 Android System WebView Crashing Apps?

Before attempting any repairs, it is crucial to back up your Realme GT 3 to prevent data loss. Once you have a secure backup, follow these steps to fix WebView app crashes and restore your Realme GT 3 to its optimal performance.

• Step 1: Download the Dr.Fone toolkit. Next, install the software on your desktop and launch it.

safe & secure

3,090,920 people have downloaded it

• Step 2: Connect your Realme GT 3 to your computer using a USB cable. Dr.Fone will automatically detect and establish a connection.
• Step 3: Select the System Repair function from the Toolbox homepage and choose Android to confirm your device type.

• Step 4: Click Start to begin the process of fixing Realme GT 3 Android System WebView crashes. Next, choose your device details and follow the in-app instructions to put your device in Download mode.

• Step 5: Dr.Fone will analyze your device’s system and download the firmware to solve the root cause of the issue.

• Step 6: Confirm your device information in the dialogue box. Dr.Fone will proceed to repair the detected WebView-related problems.

• Step 7: Once the repair is complete, your device will restart, and Realme GT 3 Android System WebView crashing apps should no longer occur.

More Articles About Android System:

5 Ways to Do With & Access Android Phone with Broken Screen

Google Play Services Won’t Update? 12 Fixes are Here!

Easy Ways to Bypass Google Account Verification (FRP) On Android Phones

Conclusion

The “Android WebView crash 2023“ issue was widespread for many Android users. The common issues encountered were app crashes, slow loading times, and error messages. Fortunately, these problems are manageable with the right approach.

By understanding the signs and causes of Realme GT 3 Android System WebView crashes, you can take proactive measures to prevent them. Quick fixes such as clearing cache and data or updates can often resolve the issue promptly.

For more comprehensive troubleshooting, Dr. Fone’s mobile solution offers a reliable and user-friendly approach. Its advanced capabilities effectively tackle app crashing issues, providing you peace of mind that your phone is functioning optimally.

safe & secure

4,684,259 people have downloaded it

Also read: