[Solved] Warning: Camera Failed on Xiaomi 14 Pro

In this article, you will learn why camera fails on Xiaomi 14 Pro devices, how to make camera work again, as well as a system repair tool to fix this issue in few clicks.

Xiaomi 14 Pro devices are one of the best Android devices available in the market and their users are always satisfied with their features. However, it is a recent observation that many Xiaomi 14 Pro users complain about Xiaomi 14 Pro camera failed error while using the camera App on the Xiaomi 14 Pro device. It is a strange error and pops up suddenly with only one option to tap on, i.e., “OK”

The error message reads as follows: “Warning: Camera Failed”.

Once you click on “OK” the app shuts down abruptly and your Xiaomi 14 Pro camera is failed. We understand this is not a very pleasing situation, thus, here are ways to tackle the camera failed Xiaomi 14 Pro issue. Let us now move ahead and find out why exactly you experience Warning: Camera Failed error and how to fix it.

Part 1: Why Xiaomi 14 Pro phone has Warning: Camera Failed error?

We are all aware that no device runs smoothly, without any glitches. We also know that there is a cause behind every problem. Listed below are a few reasons behind camera failed error, especially on Xiaomi 14 Pro devices:

1. If you have recently updated your OS version, there are chances that certain bugs are preventing the camera App from functioning normally. Also, if the update is interrupted and not downloaded completely, certain apps may suffer.
2. There are chances of your internal storage being cluttered with unwanted Apps and files leaving no space for the camera App to save its data and work smoothly.
3. If you haven’t cleared camera Cache and Data, the chances of the App to get clogged up increase tremendously which disrupt its working.
4. Warning: Camera Failed error can also be a direct outcome of a change in the system settings or the Xiaomi 14 Pro device’s internal settings.
5. Finally, if you tamper a lot with the camera settings and do not update the App whenever it is available, Xiaomi 14 Pro Camera App will not be efficient.

There might be much more reasons for the camera failed error, but these are the most obvious ones. Now let us now move on to troubleshooting the problem.

Part 2: How to fix Xiaomi 14 Pro Camera Failed in One Click?

If you are experiencing some kind of issues in your Xiaomi 14 Pros such as Xiaomi 14 Pro camera failed, the Xiaomi 14 Pro device stopped working, black screen, play store not working, etc. There is a special software is designed for such kind of issues in Android devices, i.e. dr. fone. The tool enables the users to fix various kinds of issues in the Xiaomi 14 Pro devices and perform a complete system repair so the Xiaomi 14 Pro device starts working normally.

Dr.Fone - System Repair (Android)

One-click solution to fix camera failed on Xiaomi 14 Pro devices

• The tool has a one-click operation which makes it super easy to use.
• You don’t need any technical skills expertise to operate the software.
• The software supports all the Xiaomi 14 Pro devices including the latest and older ones.
• The software can fix the “warning camera failed”, the app is crashing, failed update, etc.

4,616,396 people have downloaded it

Note: You have to remember that the system repair may erase all the Xiaomi 14 Pro device data. So, create a backup of your Xiaomi 14 Pro data first and then try fixing the Xiaomi 14 Pro phone.

Follow the steps given below and fix the camera failed error:

Step 1. Download the software on your computer and launch it. Connect your device and select the System Repair option from the main interface. In the next screen, select Android Repair module.

Click here

Step 2. You will have to provide the Xiaomi 14 Pro device details accurately to ensure that the software provides a precise firmware package to be downloaded. Enter brand, name, model, country, and carrier of your device and agree to the terms and condition.

Step 3. Now put your device in the download mode. The software will provide you with a guide to put the phone in download mode to begin the downloading process.

Step 4. As soon as the firmware is downloaded, the software will automatically initiate the repair process. You will be able to see the ongoing repair.

When the software is done repairing the system, you will be notified. Thus, the Camera failed Xiaomi 14 Pro error in your phone will be fixed.

Part 3: How to fix Camera Failed error by clearing camera data?

Has anyone ever informed you that it is absolutely necessary to keep clearing camera data every once in a while? Yes, since it deletes all unnecessary data stored in respect of the App and no, it does not mean that all your photos and videos will get deleted. Just follow the steps given below to clear camera data:

1. First, visit “Settings’” on your Xiaomi 14 Pro device and select “Apps” or Application Manager”.

2. Now a list of all Apps will appear before you. Keep scrolling down until your find “Camera”.

Tap on “Camera” to open the “Camera Info” screen and once you are there, hit “Clear Data” option as shown below.

That’s all, now return to the Home Screen and access the camera again. Hopefully, it will work now.

Part 4: How to fix Camera Failed error by removing third-party Apps?

Another tip to fix Xiaomi 14 Pro camera failed error is by deleting a few unwanted third-party Apps (recently installed) to free some space in the Xiaomi 14 Pro device’s internal storage. It is essential to create and keep storage space for the camera App to function smoothly and allow it to store its data as well. Also, if this issue only happens recently, it might be some newly installed Apps causing some glitches with the camera.

Simply, follow the instructions given below to remove Apps from Xiaomi 14 Pro Devices:

1. Click on the “Settings” icon on the Home Screen and from the options before you, select “Apps”/ “Application Manager”.

2. You will see that a list of downloaded and built-in Apps will open up before you as follows.

3. Now, once you select the App you want to uninstall, the App Info screen will appear. Tap on “Uninstall” option and then tap on “Uninstall” again on the pop-up message.

The App will be removed immediately and its icon will disappear from the Home Screen and you will notice an increase in the storage capacity of your device.

Part 5: How to fix Camera Failed error by wiping Cache Partition?

This method might seem tedious and time-consuming and you may also lose your data and essential settings. However, wiping the Cache Partition only cleans your device system internally and gets rid off any unwanted and trouble making elements causing Warning: Camera Failed error. Follow the step-by-step guide given below to clean Cache Partition smoothly:

1. Firstly, switch off the Xiaomi 14 Pro device by pressing the power button and tapping on “Power Off” as shown in the screenshot below. Then wait for the lit screen to turn off completely before proceeding further.

2. Now, press and hold the power on/off, home and volume up button simultaneously. Your device will now vibrate. This a signal to let go of the power button (only).

3. Once the Recovery Screen appears, leave all buttons and use the volume down key till you reach “Wipe Cache Partition”.

4. Now, to select the option to use the power on/off button and wait for the process to get over. Once this done, tap on “Reboot system now” and see that your device restarts normally.

You may try to use the camera app once the process completes.

Part 6: How to fix Camera Failed error by Reset Settings?

Resetting the camera settings solves the problem 9 out of 10 times and thus is worth a try.

1. To reset, first, launch the Camera App by tapping on its icon.

2. Then go to Camera “Settings” by tapping on the circular gear like icon.

3. Now look for “Reset Settings” options and click on it.

Once done, go back to the Home Screen and start the camera App again to use it.

Part 7: How to fix Camera Failed error by Factory Reset?

Lastly, if the above-mentioned techniques do not help you in fixing the camera failed error, you can consider performing a Factory Reset. Note: This method will delete all your saved data so it is advised to backup before you start the process.

Here are the steps to factory reset your device to fix “Warning: Camera Failed” Error:

1. Start by visiting “Settings” on your Xiaomi 14 Pro device on which the camera has failed.

2. Now from the list of options before you, select “Backup and reset” and move ahead.

3. Now you must first select “Factory data reset” and then tap on “Reset Device” as shown in the screenshot below.

4. Finally, you have to click on “Erase Everything” and wait for the Xiaomi 14 Pro device to reboot itself.

Note: You will have to set up your Xiaomi 14 Pro device from scratch once it is reset, however, that is a small price to pay to fix your Camera App.

Warning: Camera Failed error is not a rare phenomenon and many users experience it on daily basis. So, there is no need to panic, All you need to do is carefully follow the instructions given above and repair your Camera App yourself. You do not need to seek any technical assistance for the same as the camera failed issue is not difficult to deal with. So go ahead and try these tricks to enjoy using the Camera App on your Xiaomi 14 Pro devices.

Calls on Xiaomi 14 Pro Go Straight to Voicemail? 12 Fixes

Have you ever experienced incoming calls to your phone go straight to voicemail without ringing? It can be frustrating, especially if you’re expecting an important call. It could be due to simple things like turning down the volume or forgetting to turn off the Do Not Disturb mode. In other cases, it might be because you accidentally blocked the caller’s number.

In most cases, incoming calls going to voicemail without ringing are common. However, if it’s happening frequently or for all calls, your phone may have a problem.

This article will discuss why incoming phone calls go straight to voicemail and how to fix the problem. We’ll also show you how to use Wondershare Dr.Fone, a powerful Android System Repair tool, to solve such issues. So, if you’re uncertain why that last call went straight to voicemail, keep reading, and we’ll cover everything you need to know.

Part 1: Not Ringing? Here’s Why Calls on Your Phone Go Straight to Voicemail

If an incoming call to your cell phone goes straight to voicemail without ringing, there could be a few reasons. Here’s what to look for and what you should do to fix it:

1. Turn Off Do Not Disturb (DND) Mode

DND mode is a feature that silences all incoming calls, notifications, and alerts. If DND mode is enabled, your cell phone goes straight to voicemail when someone calls. To turn off DND mode, swipe down from the top of the screen to open the notification settings panel, then tap the Do not disturb icon.

Here’s an alternative way:

• Step 1: Open the Settings app and go to Notifications.
• Step 2: Tap Do not disturb.

• Step 3: Toggle Do Not Disturb offto disable the mode.

2. Turn Off Call Forwarding

One reason calls go straight to voicemail without ringing is if you enabled call forwarding. Call forwarding is a feature that redirects incoming calls to another number. To turn off call forwarding:

• Step 1: Open the Phone Dialer app on your device, then tap the menu icon and select Settings.

• Step 2: Navigate to Supplementary services > Call forwarding.

3. Disable Call Barring

If a phone call went straight to voicemail, another possible explanation is the call barring. It is a feature that restricts calls from being made or received on your phone. If activated, it can cause incoming calls to a phone to go straight to voicemail. To turn off call barring on Xiaomi 14 Pro devices:

• Step 1: Open the Phone Dialer app, then tap the menu icon in the top right corner.
• Step 2: Go to Settings > Supplementary services > Call barring, then tap OK.
• Step 3: Select Voice call, then turn off your preferred outgoing and incoming calls. When prompted, enter 0000 as a password.

4. Update Your Phone’s Software

Sometimes, software bugs can cause problems with incoming calls, which may be why your last incoming call went straight to voicemail. If your phone runs outdated software, try updating it to the latest version.

To check for updates, open the Settings app and go to Software update or System update. For a seamless update experience, follow the step-by-step instructions on your mobile screen.

5. Reset Network Settings

If the incoming calls on your phone go straight to voicemail, consider resetting your phone’s network settings. Network settings control how your phone connects to the cellular network. If these settings are not set up correctly, incoming calls may not be able to reach your device.

Note: Resetting your network settings will erase any saved Wi-Fi networks and Bluetooth pairings, requiring you to re-enter them after the reset is complete.

To reset your network settings on most Android devices:

• Step 1: Open the Settings app on your smartphone, then tap System or General Management.
• Step 2: Go to Reset > Reset Network Settings and confirm the action.

6. Turn Off Bluetooth

When Bluetooth is on, it can interfere with your device’s ability to receive calls, causing them to go straight to voicemail without ringing. To turn off Bluetooth on an Android device, you can do one of the following:

• Swipe down from the top of the screen to open the Quick Settingspanel, then tap the Bluetooth icon to turn it off.

• Go to Settings> Connections > Bluetooth and toggle the switch off.

It should help ensure that calls come through to your phone instead of going to voicemail.

7. Check Airplane Mode

If turning off Bluetooth didn’t solve the issue, another possible cause could be that your phone is in Airplane Mode. Airplane Mode turns off all wireless connections on your phone, including cellular service, which can cause calls to dial straight to voicemail. There are two ways to turn off Airplane mode on Android:

Using the Settings app:

• Step 1: Open the Settings app.
• Step 2: Tap Network & internet.
• Step 3: Toggle off Airplane mode or Flight mode.

Using the Quick Settings panel:

• Step 1: Swipe down from the top of the phone screen to access the Quick Settings panel.
• Step 2: Look for the Airplane mode or Flight mode icon, then tap it to turn it off.

8. Check Blocked Numbers

“My boyfriend’s phone goes straight to voicemail when someone is calling. Any idea why that might be?”

Do you also find yourself asking what does it mean? It could be that he has blocked that phone number. To check this:

• Step 1: Open the Phone dialer app.
• Step 2: Tap the menu icon in the top right corner and select Settings.
• Step 3: Tap Block numbers. If you find the number in the blocked list, remove it to ensure that their calls come through to the phone.

If you still have trouble reaching your boyfriend, try calling him from a different number. If your call didn’t go through, you know that he hasn’t blocked your number and that there may be another issue with his phone.

9. Turn Off Google One VPN

If you’re using Google One VPN, try turning it off to see if that fixes the problem. Some users have reported that Google One VPN can cause incoming calls to a phone to go straight to voicemail. To turn off Google One VPN:

• Step 1: Open the Google One app on your Xiaomi 14 Pro.
• Step 2: At the bottom, go to the Benefits tab, then tap View Details below the Online protection with a VPN section.

• Step 3: Toggle off Enable VPN.

10. Contact Your Carrier

If your phone calls go straight to voicemail after trying all the above, contact your carrier for help. They may be able to troubleshoot the problem or determine if there is a service outage in your area.

And if your carrier confirms that there is no service outage or billing-related block, the problem may be with your phone itself. You may need to try resetting your phone to factory settings or taking it to a repair shop.

11. The Caller Used Ringless Voicemail

Ringless voicemail is a service that allows businesses to bypass your phone’s ringtone and send you pre-recorded messages directly to voicemail. Ringless voicemail is often used for marketing purposes. If you think you’re receiving ringless voicemail calls, you can contact the company calling you and ask them to remove you from their list.

Part 2: Not Clear About the Root Cause? Troubleshoot Directly by Wondershare Dr.Fone

If you’re unsure what’s causing your calls to go straight to voicemail, you can try using the Dr.Fone System Repair tool. This software can scan and repair your phone for any underlying problems, which may fix the issue and get your calls ringing again.

Dr.Fone supports over 1000 Android models, including unlocked Xiaomi 14 Pro models and models from carriers like AT&T and Vodafone. It has an intuitive interface and is easy to use, even for beginners. Learn below the steps on how to use Dr.Fone System Repair to fix incoming calls that dial straight to voicemail:

• Step 1: Download Dr.Fone on your computer, then launch it once installed.

safe & secure

4,118,635 people have downloaded it

• Step 2: Connect your smartphone to your desktop or computer using a USB cable. Next, from the Toolbox homepage, select System Repair.

• Step 3: Select Android as the Xiaomi 14 Pro device type.

• Step 4: Click Start to begin repairing your smartphone.

• Step 5: Select the Xiaomi 14 Pro device details on the Name, Model, Country, and Carrier drop-down lists. Next, select the agreement checkbox, then click Next to proceed.

• Step 6: Follow the in-app instructions to enter Download mode on your Xiaomi 14 Pro, then click Next.

• Step 7: Wait while the app downloads the firmware; once done, click Fix Now.

• Step 8: Enter the code in the input box to verify the Xiaomi 14 Pro device information in the dialogue box, then click Confirm.

• Step 9: The app will start repairing the system issue on your Xiaomi 14 Pro. Once completed, your app should restart, then click Done to close the app.

You May Also Like:

Top 5 Best Android System Repair Apps

How to Fix It: Android Stuck on Boot Screen?

How to Flash Dead Android Phone Safely

Conclusion

When your phone calls go straight to voicemail without ringing, it can be a frustrating and disruptive experience. Not only do you miss important calls from work, friends, or family, but it also leaves you feeling disconnected and out of the loop. As a temporary measure to avoid missing important calls, check your voicemail regularly.

For a prompt solution, consider using Dr.Fone if incoming calls on your phone go straight to voicemail. It is a powerful mobile solution that can also address other system problems, including stuck boot loops, app crashes, black screens, and bricked devices. If you consistently experience this issue, it’s advisable to reach out to a professional for assistance.

safe & secure

4,215,287 people have downloaded it

Why Your Xiaomi 14 Pro Screen Might be Unresponsive and How to Fix It

This article aims to provide practical solutions for troubleshooting an unresponsive Xiaomi 14 Pro screen. Whether you’re facing a software glitch or hardware damage, this guide will offer useful tips and tricks to help you resolve the issue and get your device back up and running smoothly.

5 Solutions to Solve Xiaomi 14 Pro Screen Unresponsive Issues

An unresponsive Xiaomi 14 Pro screen can be frustrating, but several potential solutions can help. This article will explore five methods for troubleshooting an unresponsive Xiaomi 14 Pro screen. From force restarting your device to contacting customer service, we’ll cover everything you need to know to get your device back up and running.

1. Force Restart

If your Xiaomi 14 Pro screen is unresponsive, the first thing to try is a force restart. This can help refresh the system and clear any temporary files causing the issue.

Step 1. Press and hold the power button on your Xiaomi 14 Pro device.

Step 2. When the power options appear, tap “Restart.”

Step 3. Hold the power button if the screen is completely unresponsive until the Xiaomi 14 Pro device shuts down. Then, press and hold the power button to turn the Xiaomi 14 Pro device back on.

2. Drain the Battery Completely

If force restarting doesn’t work, let the battery drain completely. This can help reset the Xiaomi 14 Pro device and clear any temporary files or processes causing the issue.

Step 1. Leave your Xiaomi 14 Pro device on until the battery completely drains and the Xiaomi 14 Pro device shuts down.

Step 2. Connect your device to a power source and turn it back on.

3. Check for Software Updates

Sometimes, an unresponsive Xiaomi 14 Pro screen can be caused by outdated software. Checking for software updates ensures your device runs the latest and most stable operating system version.

Step 1. Go to “Settings“ on your Xiaomi 14 Pro device.

Step 2. Scroll down and tap “Software Updates.”

Step 3. If an update is available, tap “Download and Install.”

4. Using Dr. Fone Repair

Dr. Fone Repair is a professional tool that can help fix a wide range of software issues on your Xiaomi 14 Pro device. Dr. Fone Repair can be a good option to protect your data and files while troubleshooting an unresponsive Xiaomi 14 Pro screen.

safe & secure

Step 1. Download and install Dr. Fone Repair software on your computer.

Step 2. Connect your Xiaomi 14 Pro phone to your computer using a USB cable.

Step 3. Launch Dr. Fone Repair and select the “System Repair“ option.

Step 4. Choose the “Android Repair“ option from the available choices.

Step 5. Click on “Start“ to begin the repair process.

Step 6. Provide the necessary device information on the screen, including your name and model.

Step 7. Click “Next“ to proceed to the next step.

Step 8. Follow the on-screen instructions to complete the repair process for your Xiaomi 14 Pro phone’s touchscreen.

5. Contact Customer Service

If none of the above solutions work, it may be time to contact Xiaomi 14 Pro customer service. They can provide additional support and help troubleshoot the issue.

Step 1. Go to the Xiaomi 14 Pro website and navigate to the “Support“ section.

Step 2. Select your device model and click “Contact Us.”

Step 3. Choose your preferred method of contact, such as phone or email, and describe the issue you’re experiencing.

Common Causes of Xiaomi 14 Pro Screen Unresponsiveness

While Xiaomi 14 Pro devices offer reliable performance, users may encounter situations where the screen becomes unresponsive or stuck on boot. Soft-bricked software or corrupted firmware can cause an Xiaomi 14 Pro device to become unresponsive, including the screen stuck on the boot. This can happen to various models, such as the Xiaomi 14 Pro, A37, A5, and A5s. Software updates and resets can help fix these issues.

Over time, the touch screen of an Xiaomi 14 Pro device may become unresponsive due to wear and tear. This can happen to models like the Xiaomi 14 Pro F1s and F3. In this case, replacing the touch screen or seeking professional assistance may be necessary.

Dropping or impacting an Xiaomi 14 Pro device can cause physical damage to the touch screen, resulting in unresponsiveness. This can happen to various models like the Xiaomi 14 Pro Reno and Find X. In some cases, the damage may be repairable, but the screen replacement or the Xiaomi 14 Pro device itself may be necessary in severe cases. Protecting the Xiaomi 14 Pro device with a case and handling it carefully to prevent physical damage is important.

While Xiaomi 14 Pro devices are generally reliable, various factors can contribute to screen unresponsiveness. Users can effectively troubleshoot and resolve issues by identifying these potential causes and seeking appropriate solutions.

How to Avoid Xiaomi 14 Pro Screen Unresponsiveness Issue

One of the most effective ways to prevent Xiaomi 14 Pro Screen unresponsiveness is by keeping the Xiaomi 14 Pro device software up-to-date. Regularly checking for system updates and installing them promptly can prevent software issues and potential bugs that may cause unresponsiveness. Additionally, updating device apps can help prevent conflicts that affect the touch screen’s functionality.

Another way to avoid Xiaomi 14 Pro Screen unresponsiveness is by protecting the Xiaomi 14 Pro device from physical damage. Using a protective case or screen protector can help prevent cracks or scratches on the screen that can lead to unresponsiveness. Avoiding impacts or drops can also reduce the risk of physical damage to the touch screen.

Installing apps from unknown sources or suspicious websites can expose the Xiaomi 14 Pro device to malware and viruses, which can cause unresponsiveness and other issues. To avoid this, it’s recommended to only install apps from trusted sources such as the Google Play Store or the Xiaomi 14 Pro App Store.

Using a reliable tool like Dr. Fone can help prevent Xiaomi 14 Pro Screen unresponsiveness by allowing you to manage and repair your device’s software and data. With features such as System Repair and Data Backup & Restore, you can quickly diagnose and fix software issues that may cause unresponsiveness and safely back up important data to prevent loss in case of device damage or malfunction.

Conclusion

Xiaomi 14 Pro Screen unresponsiveness can be a frustrating issue to deal with, but there are solutions available. Force restarting the Xiaomi 14 Pro device, checking for software updates, using Dr. Fone Repair, and contacting customer service are all effective ways to solve the problem. However, it’s also important to understand the possible causes of the issue, such as soft-bricking or equipment wearing out, and take preventative measures, such as updating your phone on time and avoiding malware. These tips can help prevent Xiaomi 14 Pro Screen unresponsiveness and keep your device running smoothly.

safe & secure

Also read: