How To Revive Your Bricked Poco M6 Pro 5G in Minutes

Poco M6 Pro 5G has established a notable presence within the custom development arena. This trait holds for Poco M6 Pro 5G. Today, it’s still one of the most popular budget smartphones available. The popular smartphone offers the freedom to flash custom ROMs, attain administrative privileges, access countless customization options, and much more.

Yet, delving into these capabilities comes with its share of risks. The potential for your Poco M6 Pro 5G to brick is high if you don’t know what you’re doing. This page teaches you how to unbrick your Poco M6 Pro 5G if it happens.

Part 1. Potential Causes of a Poco M6 Pro 5G Becoming Bricked

The factors that lead to your Poco M6 Pro 5G to brick vary. The possible solutions also depend upon the underlying causes. At times, the manufacturer’s intervention remains the only viable remedy. Below are the most frequent causes of bricking.

• The presence of malicious malware can harm your Poco M6 Pro 5G. This can result in a ‘bricked’ state devoid of functionality.
• Altering the bootloader, system partition, or other critical software components risks triggering a bricking event.
• Bricking can also occur due to errors during the update process. Whether through automatic or manual downloads, any interruption during software updates can cause your Poco M6 Pro 5G to brick.
• Using inappropriate methods when performing root access can also result in bricking. Performing root access is dangerous as it grants entry to the Poco M6 Pro 5G device’s root directory housing the operating system.

Every Android device is susceptible to experiencing a system failure that leads to a bricked state. The risk remains consistent whether your device is from Poco M6 Pro 5G, Poco M6 Pro 5G, Poco M6 Pro 5G, or any other brand. That’s why it’s strongly advised against modifying their smartphones, especially when you don’t know what you’re doing.

Part 2. Techniques To Unbrick a Poco M6 Pro 5G

When faced with a bricked Poco M6 Pro 5G, below are various techniques to revive it. Whether through software resets or hardware interventions, these methods can help breathe life back into your device.

Discharge the Battery

A particular suggestion involves allowing the Poco M6 Pro 5G device’s battery to discharge fully, enabling proper functionality of the Flash Tool software. This process typically spans a few days and is recommended by some specialists.

Perform a Factory Reset

Accessing the Poco M6 Pro 5G device settings is impossible if your Poco M6 Pro 5G bricks. For this reason, it is recommended to enter Recovery Mode. Here’s how.

• Step 1: Press and hold the Power button and select the Restart option. During the reboot, press the Volume Up and Power keys simultaneously.

• Step 2: The main menu will show three options: Reboot, Wipe Data, and Connect with MIAssistant. Choose Reboot.

Explore Dedicated Software Tools To Fix Bricked Phones

Poco M6 Pro 5G offers its official software tools, such as the Poco M6 Pro 5GFlash Tool. It’s designed for advanced users familiar with flashing firmware onto their devices. Here’s how.

• Step 1: Download and install the Poco M6 Pro 5GFlash Tool .

• Step 2: Download the Stock Firmware of Poco M6 Pro 5G and extract it on your computer. Press and Hold the Power and Volume Down buttons for at least 5-10 seconds to enter Fastboot Mode.

• Step 3: Connect your Poco M6 Pro 5G to the computer using a USB cable. Launch Poco M6 Pro 5GFlash Tool and locate the Firmware you have downloaded on the computer. Click the refresh > flash to begin the flashing process.

• Step 4: The SUCCESS result should appear in the Poco M6 Pro 5GFlash Tool once the flashing process is done.

However, if the Poco M6 Pro 5GFlash Tool did not unbrick your Poco M6 Pro 5G, consider using Wondershare Dr.Fone - System Repair (Android). The platform allows you to unbrick your Poco M6 Pro 5G with a few clicks.

Part 3. Reviving Your Poco M6 Pro 5G Using Wondershare Dr.Fone - System Repair (Android)

Dr.Fone - System Repair (Android) equips Poco M6 Pro 5G users with the ability to tackle soft brick and hard brick issues. This specialized Android repair tool enables you to restore your Poco M6 Pro 5G through a streamlined process, requiring just a few simple clicks.

safe & secure

3,227,773 people have downloaded it

Key Features

Dr.Fone - System Repair (Android) offers several benefits to unbrick your Poco M6 Pro 5G easily. Below are its key features.

• Fix Common Poco M6 Pro 5G Problems in Minutes. This tool provides comprehensive solutions for common issues like black screen, Play Store not working, boot loops, or even bricked Android devices .
• Compatibility with Over 1000 Android Models. This app fixes glitches across modern Android devices. The software is compatible with an extensive range of models. Whether your Poco M6 Pro 5G is unlocked or carrier-bound, restoration is not a problem.
• Unparalleled Software Flexibility. Dr.Fone - System Repair (Android) also boasts an added capacity to mend iOS devices. This versatile tool is your all-inclusive solution for mobile devices, ensuring convenience whether you own an iOS or Android device.

Advantage of Dr.Fone - System Repair (Android) for Unbricking Poco M6 Pro 5G

Here are three benefits to choosing Dr.Fone - System Repair (Android) for unbricking a Poco M6 Pro 5G. You’ll further believe Dr.Fone is a reliable assistant when reviving your bricked Poco M6 Pro 5G.

Simplified Firmware Management

Dr.Fone eliminates the tedious search for appropriate firmware when unbricking your Poco M6 Pro 5G. The platform automatically downloads the correct firmware for your device. The hassle of identifying and manually procuring firmware is removed, saving time and ensuring a smoother unbricking process.

User-Friendly Approach

One of Dr.Fone’s key strengths is its user-friendly design. It caters to users with varying levels of technical expertise by employing a step-by-step process. This approach guides users through the repair process with clarity. It reduces the requirement for advanced technical knowledge.

Free Version for Evaluation

Dr.Fone - System Repair (Android) offers a free version for everyone. It allows users to test its capabilities before committing to a purchase. This trial version grants users the opportunity to assess the tool’s effectiveness and suitability for unbricking their Poco M6 Pro 5G. This instills confidence before investing in a full license.

How To Unbrick Poco M6 Pro 5G Using Dr.Fone - System Repair (Android)

Dr. Fone’s features are perfect for unbricking Poco M6 Pro 5G devices. Below are the procedures to restore your Poco M6 Pro 5G from its bricked state.

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

• Fix your Android to normal, no skills required.
• Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
• The high success rate in resolving Android system issues.
• Compatible with a wide range of Android devices and OS versions
• User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

• Step 1: Download and install Dr.Fone - System Repair (Android) on your computer. After launching the application, click System Repair. Then, click Android as the Poco M6 Pro 5G device type. Connect your Poco M6 Pro 5G. Indicate Phone Brick as the Android issue and initiate the process by clicking Start.

• Step 2: Select the appropriate device information corresponding to your Poco M6 Pro 5G. Choose Brand, Name, Model, Country, and Carrier. Confirm by checking the I agree button, then proceed to the next step by clicking Next.

• Step 3: Given that the Poco M6 Pro 5G lacks a Home button, click the Phone without Home button option. Follow the prompts displayed on-screen and proceed by clicking Next to initiate the process of restoring your bricked phone.

• Step 4: As your Poco M6 Pro 5G enters Download Mode, the firmware download will start automatically. Follow the on-screen instructions. Wait for the system to initiate the repair procedure automatically. Upon completion, a message will pop up on the main window. Click Done to exit the tool. You can click Try again to repeat the process if needed.

You May Also like:

How To Fix iPhone Bricked After iOS 17/iOS 16/iOS 15 Update
How to Fix It If Your Poco M6 Pro 5G Phone Got Bricked?

Conclusion

Don’t let a bricked Poco M6 Pro 5G stand in your way. Use the array of techniques from basic troubleshooting to advanced software tools to breathe life back into your device. Unbrick your Poco M6 Pro 5G to its full functionality using the methods provided or Dr.Fone’s adept assistance.

Lastly, you can still refer to Poco M6 Pro 5G for repairs. It remains the primary solution in numerous cases. Utilizing your warranty can alleviate the associated costs. Seeking assistance from a specialized technician is also a viable route to consider for a thorough device assessment.

Poco M6 Pro 5G Screen Unresponsive? Here’s How to Fix It

Poco M6 Pro 5G phones have become increasingly popular due to their advanced features, sleek designs, and affordable prices. These phones offer many benefits, including high-quality cameras, long battery life, and fast processing speeds. However, sometimes users may encounter problems such as a Poco M6 Pro 5G touch screen not working, which can be frustrating and difficult.

This article aims to provide solutions for Poco M6 Pro 5G phone users experiencing screen unresponsiveness. We will explore various reasons this issue may occur and discuss step-by-step instructions for fixing the problem. So, if your Poco M6 Pro 5G touchscreen is not working, don’t worry – we’ve got you covered!

What Causes A Poco M6 Pro 5G Screen Unresponsive?

There are several reasons why a Poco M6 Pro 5G phone’s screen may become unresponsive. Some common causes include software issues, hardware problems, or issues with the touchscreen itself. It’s essential to identify the root cause of the problem to fix it properly.

Below are some possible causes of Poco M6 Pro 5G screen unresponsiveness, along with explanations of each.

• Soft-bricked software: Soft-bricking refers to the state where the phone is stuck in an infinite boot loop or unable to boot. It can occur due to corrupt system files, outdated firmware, or unsuccessful updates. For example, some Poco M6 Pro 5G Y2 and 5A users have reported their screens getting stuck on the boot logo after a software update, rendering the Poco M6 Pro 5G device unusable.

• Equipment is worn out: Hardware problems can also cause Poco M6 Pro 5G screens to become unresponsive. It can be due to worn-out equipment, such as a damaged LCD screen, malfunctioning touch sensor, or loose ribbon cables. These issues can also occur in any Poco M6 Pro 5G model, including the Y2 and 5A.

• **Touchscreen problems:**Sometimes, the touchscreen itself can become unresponsive for various reasons. For instance, Poco M6 Pro 5G Y2 and 5A users may face this issue if they have accidentally dropped their phone, exposed it to water, or used an incompatible screen protector. It can result in a damaged or malfunctioning touchscreen, making it difficult or impossible to operate the phone.

The Common Solutions To Solve A Poco M6 Pro 5G Screen Unresponsive

In the previous section, we identified the possible causes of Poco M6 Pro 5G screen unresponsiveness, including soft-bricked software, hardware problems, and touchscreen issues. While the underlying reasons for screen unresponsiveness can be varied and complex, some common solutions can help resolve the issue. Here are three of the most common solutions to address tablet screen unresponsiveness, no matter the Poco M6 Pro 5G model.

1. Restart The Device

Restarting the phone is typically the initial solution that comes to mind when we encounter the Poco M6 Pro 5G black screen problem. It’s a simple and widely used method to address the issue, as the black screen problem could be caused by a software glitch, which can often be resolved by freeing up the phone’s memory.

It is the most commonly used method to fix Poco M6 Pro 5G’s touch screen and power button issues, such as unresponsiveness. By restarting the Poco M6 Pro 5G device, background processes are disabled, and memory is freed up, allowing programs to run smoothly and potentially resolve the problem. To restart a Poco M6 Pro 5G device, press the Power and Volume Up buttons simultaneously, and release the Power button once the Poco M6 Pro 5Glogo appears.

2. Leave The Phone And Let The Battery Drain Completely

Sometimes, the tablet screen may become unresponsive due to a software issue preventing the Poco M6 Pro 5G device from functioning correctly. Leaving the Poco M6 Pro 5G device unused and draining the battery helps resolve these issues. After fully discharging the battery, the Poco M6 Pro 5G device can be recharged and turned back on, potentially resolving the issue.

3. Contact Custom Service

If restarting the Poco M6 Pro 5G device or allowing the battery to drain doesn’t resolve the issue, seeking professional assistance is recommended. The manufacturer may provide additional troubleshooting steps or recommend sending the Poco M6 Pro 5G device in for repair or replacement. It’s important to check the warranty before contacting customer service, which may affect repair or replacement options.

In addition to the common solutions we discussed earlier, some model-specific solutions can help resolve the screen unresponsiveness issue on Poco M6 Pro 5G Y2 and Poco M6 Pro 5G 5A.

4. Optimize Device Performance

One solution is to optimize the Poco M6 Pro 5G device performance by clearing the cache, removing unwanted apps, and disabling unnecessary features. This method can help free up memory and resolve the issue.

You can clear your cached data using the default settings.

• Select Settings> Storage > Cached Data.
• To clear the cache, select Clear Cache.

5. Back Up And Factory Reset

Another solution is to back up the Poco M6 Pro 5G device and perform a factory reset, which can help reset the Poco M6 Pro 5G device to its original state and remove any software glitches that may be causing the screen unresponsiveness. The factory settings on your phone will restore any data saved by third-party applications and some of the phone’s settings when it was first built. Note that this method erases all data from the Poco M6 Pro 5G device, so it should only be considered a last resort.

In the following steps, we will show you how to format the Poco M6 Pro 5G Redmi 5A to erase all your data and restore it to its factory state.

• Open the Settings.
• Navigate to the Additional settings section of the Poco M6 Pro 5G Redmi 5A settings.
• Please scroll down the screen until you reach the Backup & reset option, then click to access it.
• ClickErase all data (factory reset) to restore the network settings and applications, or completely reset the Poco M6 Pro 5G Redmi 5A.
• Select All files on the phoneto make a complete format of the Poco M6 Pro 5G Redmi 5A.

6. Using Dr. Fone Repair

If none of the above solutions worked, you can try using Dr. Fone Repair. This software is designed to fix various software issues on Android phones, including Poco M6 Pro 5G devices. It can fix issues such as screen stuck on boot, black screen, and other software-related problems. Dr. Fone Repair is easy to use and can protect your data and files on your phone.

Here’s how to fix repair screen unresponsiveness or any software-related issues on Poco M6 Pro 5G Y2 and Poco M6 Pro 5G 5A using Dr. Fone Repair:

• Begin by installing and opening Dr.Foneon your PC.
• Once opened, select the ‘System Repair’ option and connect your Android smartphone to your PC via USB cable.
• On the next screen, choose “Android****Repair“ from the list of available options.
• Click on the “Start“ button to initiate the repair process.
• You will then be prompted to enter the required device information such as the Poco M6 Pro 5G device name, model number, and firmware version.
• Once you have entered the necessary information, click on the ‘Next’ button to proceed.
• Follow the on-screen instructions carefully to repair your Poco M6 Pro 5G.

How To Avoid A Poco M6 Pro 5G Screen Unresponsive?

To avoid facing a Poco M6 Pro 5G screen unresponsive issue, users can take several preventative measures. One important step is to update the Poco M6 Pro 5G phone regularly to ensure the software is up to date and all bugs and glitches are fixed. Users can also use tools like Dr. Fone to regularly manage and repair data, including clearing cache and removing unwanted apps. It is also important to use quality charging cables and avoid exposing the Poco M6 Pro 5G device to extreme temperatures or humidity, which can damage the internal components and potentially cause screen unresponsiveness. Finally, users can avoid dropping or mishandling the Poco M6 Pro 5G device, leading to physical damage and causing the screen to become unresponsive. Users can help prevent screen unresponsiveness by taking these steps and ensuring their Poco M6 Pro 5G device runs smoothly and reliably.

safe & secure

Conclusion

Encountering a Poco M6 Pro 5G screen unresponsive issue can be a common problem for some Poco M6 Pro 5G phone users. However, with the solutions we have provided in this article, you can effectively solve the problem and get your phone back up and running in no time. It’s important to remember to regularly back up your data and take preventative measures, such as avoiding harmful malware and keeping your phone updated, to avoid experiencing this issue in the future.

By using reliable software, like Dr.Fone Repair, you can ensure that your Poco M6 Pro 5G phone is well-maintained and operating smoothly. With these solutions and tips, you can enjoy the benefits of your Poco M6 Pro 5G phone without any interruptions.

How To Fix Part of the Touch Screen Not Working on Poco M6 Pro 5G

You probably touch the screen of your phone hundreds of times per day. It’s no surprise that smartphone touchscreens are one of the most common components to fail, given their delicate glass construction. However, a part of the touch screen not working on your Poco M6 Pro 5G does not necessarily mean it is a hardware issue. There could be other reasons why your Android’s touch screen stopped responding.

If your phone’s touchscreen frequently fails to respond, there are several things you can try before calling a professional. This article will reveal those proven fixes you can easily perform independently.

Part 1. Why Is Part of My Screen Not Working

There are two possible causes as to why your phone’s touch screen is not working. One is the touch screen may have been damaged, and the other is the Poco M6 Pro 5G device may be experiencing technical difficulties.

If you drop your phone and it becomes stuck against something, the touch screen’s connectivity may fail. Only a part of the touch screen may sometimes become damaged and unresponsive. That may also occur when there is a technical failure, such as the phone hanging. A part of the touch screen not working can occur when malware is downloaded or when phone settings are changed.

Now, the problem can affect any Android phone, and users may encounter the following error messages on their respective phone models:

• Poco M6 Pro 5G P40 lite half touch screen not working
• Nexus touch screen not working
• LG screen is unresponsive to touch
• Poco M6 Pro 5G left side of the screen is not working
• Redmi’s whole screen is unresponsive to touch

Part 2. Different Types of Touch Screen Issues and What You Should Check Before Fixing

You may experience a variety of touch screens not working on Android issues:

• A certain part of the touch screen is not working.
• Your touches do not register on the touch screen.
• The touch screen incorrectly responds to your touch.
• Half touch screen is not working.
• The touch screen becomes frozen or hangs.
• The screen flashes, flickers, or remains blank.
• Theleft side of the phone screen is not working.

Before proceeding to how to fix an unresponsive touch screen on an Android device, you should complete the following steps:

• Examine the screen of your device. Check to see if it is cracked or chipped.
• If the screen is damaged, it must be replaced.
• Remove the Poco M6 Pro 5G device cover and screen protector if they are not damaged.
• If there is a sticker on the Poco M6 Pro 5G device screen, you must remove it.
• Before continuing, make sure your screen is spotless.

Part 3. How To Fix Part of the Touch Screen Not Working (No Physical Damage)

If you have already tried running the Poco M6 Pro 5G device in diagnostic mode and verified that it is not physically damaged, then the problem is most likely technical. If your Poco M6 Pro 5G’s screen is not responding to touches for technical reasons, follow the methods below to resolve the issue.

Restart Your Device

When your touch screen stops working, the first thing you should do is restart your device. The operation is known as soft resetting. You cannot turn your device off from the option on the screen because the touch screen is not responding. Here are the steps to take.

Step 1: Hold the “Power” button until the Poco M6 Pro 5G device turns off.

Tip: If you hold down the power button for a few seconds, you will see the “Power Off” and “Restart” options on the screen. You can’t use it because the entire screen isn’t responding. Hence, you should press and hold the “Power” button for as long as necessary.

Step 2: When the Poco M6 Pro 5G device turns off, wait a few seconds.

Step 3: Press and hold the “Power” button to restart the Poco M6 Pro 5G device.

Check to see if the Android auto touch screen is not working problem has been resolved. Otherwise, proceed with the following methods.

Turn On Safe Mode

You should switch to Safe mode whenever an application or piece of software causes a problem on your device. Only the most fundamental system components are loaded and used when operating in Safe mode.

If your touch screen is functional in safe mode, the issue is most likely internal. You can quickly fix the Android touchscreen issue by following the prompts given below to activate the safe mode:

Step 1: To force a restart, press and hold the Poco M6 Pro 5G device’s “Power” button for an extended period.

Step 2: Maintain pressure on the “Power” button. Take your finger off it once you see the manufacturer’s logo.

Step 3: When you let go of the “Power” button, press and hold the “Volume Down” button. After that, a “Safe Mode” label will appear in your screen’s lower-left corner.

Turn Off Developer Options

Every smartphone is bound to have limitations. However, smartphone makers include a “Developer Options” menu for advanced users. Here, restrictions are removed, and user preferences can be customized.

If you enable Developer Options on some Android devices, they may stop working properly. If you have recently activated Developer Options and your touchscreen is no longer responding as expected, you should disable it. To do so, follow the instructions below:

Step 1: Launch the Settings app on your device.

Step 2: Select the System menu item, which usually locates at the bottom of the screen.

Step 3: Tap the Advanced options menu, then select Developer Options.

Step 4: You will then find the switch to turn it on or off. Disable itby toggling the button off.

Step 5: Restart your device to check if the part of the touch screen not working issue has been resolved.

Reset Device to Factory Settings

Resetting your device to its factory settings will return it to its state when you first unboxed it. All your phone’s data and installed apps will be erased, including any malware on your device that may be causing the issue to occur. Here’s how to restore your device to factory settings:

Step 1: Since your touch screen is not working, you can factory reset it using Google’s Find My Device web service.

Step 2: Go to Find My Device from any device and sign in to the Google account associated with the damaged screen device.

Step 3: After successfully logging in, you will see your device’s name. Select the Erase Device option.

Step 4: Confirm by pressing the Erase Device button.

Tip: Since all your data will be removed, it’s recommended to back up your data first before resetting your device to factory settings.

Part 4. Fix Using a Third-Party App – Wondershare Dr.Fone

If you’ve exhausted all other options and still can’t fix your Android’s part of the touch screen not working issue, it’s time to resort to Dr.Fone – System Repair! It allows you to repair Android system issues with a single click.

Many users have reported exceptions on their Android devices, such as touch screen failure, black screen of death, system UI failure, app crashing, etc. And in this case, people should seek an Android repair tool.

Dr.Fone – System Repair has made it easier than ever for Android users experiencing technical issues with their device, including an unresponsive touch screen, among other system issues. The best part is that no data will be lost while repairing Android system issues.

Follow the steps given below on how to use Wondershare Dr.Fone System Repair for Android:

Step 1: Select the System Repair option from the main window after starting Dr. Fone.

Step 2: Connect your Poco M6 Pro 5G or tablet to the computer using the appropriate cable. Choose Android Repair from the three options shown on the left side of the screen.

Step 3: The device information screen will appear in the next window. There, input your device’s unified brand, name, model, country/region, and carrier information. Then click Next after you confirm the warning.

The Android repair procedure may wipe out all data on your device. To confirm and proceed, enter “000000”.

Note: It is strongly advised that you back up your Android data before attempting Android repair.

Step 4: Before repairing your Poco M6 Pro 5G, you must boot it into Download mode. To boot your Poco M6 Pro 5G or tablet into DFU mode, follow the steps below:

For a device that has a Home button:

1. Turn off your phone or tablet.
2. Hold the Volume Down, Home, and Power buttons for 5 to 10 seconds.
3. To enter Download mode, release all the buttons and press the Volume Up button.

For a device that lacks a Home button:

1. Turn off the Poco M6 Pro 5G device.
2. Hold the Volume Down, Bixby, and Power buttons for 5 to 10 seconds.
3. To enter Download mode, release all the buttons and press the Volume Up button.

Step 5: Then press the Next button. The program will then download the firmware. After downloading and verifying the firmware, the program will automatically repair your Poco M6 Pro 5G. And in a while, your Poco M6 Pro 5G’s system issues will be resolved.

Supported OS

Check Dr.Fone’s supported operating systems below before using the application to fix your mobile technical issues.

Key Features

Dr.Fone – System Repair is a data management and recovery tool that contains several toolkits in one program, each designed to repair a specific phone problem. Check out its key features below:

• One-click Android Repair Tool
• Troubleshoots and repairs a wide range of Android system problems, including black screen of death, Play Store not working, apps crashing, phone stuck in a boot loop, and bricked Android issues
• A high success rate for fixing Android system issues
• Fixes Android system back to normal

Pros

Here are the advantages of using Dr.Fone – System Repair:

• Highly intuitive UI/UX/. No need for any skill to operate it
• Provides a comprehensive set of toolkits, including advanced data recovery and system repair
• Data management is simple and seamless for both Android and iOS devices
• Data backup with Dr. Fone is simple and quick.

Cons

Check below to know Dr.Fone – System Repair’s limitations:

• Depending on the toolkit required, the program can be costly.

safe & secure

Conclusion

Fixing an Android part of the touch screen not working issue can be quickly done with just a few fixes you can do on your own. However, there may be times when the solutions provided above may not work, and the worst part is factory resetting your phone erases all your data.

That’s why Dr.Fone – System Repair might be your best solution. It has all the tools you need to keep your Poco M6 Pro 5G 100%. Not only that, but with Dr.Fone, you can repair your Android system issues without dealing with any data loss.